PROVN OF FLYROOF DOOR, WINDOW AND CONNECTED WORKS IN BLDG NO P-25, P-27, P-51, AND P-52 AT KABUL LINE AND PROVN OF 01 TOILET AND BATHROOM ATT AT BLDG NO P-17/2 POLO ROAD AOR OF AGE B/R-II UNDER GE (EAST) DELHI CANTT-10

Amount

Taking down chowkats or frames with shutters (without taking off shutters from frames) area not exceeding 1.50 sqm each complete all as specified

Taking down chowkhats or frame with shutters exc 1.5 Sqm and n exc 4.00 sqm ditto but with shutters (without taking off shutters from the frame)each complete all specified and directed.

M&L Mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted or forged into spikes, framed guard bar; barred iron doors; ladder; framed balusters; railing; frame work for water tanks and similar work conforming to Fe 290 Gde-E-165 all as specified .

M & L for Framed work such as in door frame, door shuters / gate of angel, flat Iron, plates or other section complete prepared for fixing of steel sheeting or other convering doors to be prepared for hanging with and including hings, hold fast , handles , locking arrangement and all necessary required fittings of Fe 410-W (Gde E-250 quality -'A') etc complete all as specified.

M&L PCC 1:2:4, type B-1 (20mm graded stone aggregate) as in copings, Hold fast, roof kerb, kneelers, apex stones, bed plates, kerbs water troughs, packing of sides, edges and the like including weathering, slightly rounded or chamfered angles and throating, all as specified and directed.

S&F 2nd class, 35mm thick hardwood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (with sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a).

S&F Factory made Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated

S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete.

All same as per srl item No 8 here-in-before but without glazing bar.

S& F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples

M&L two coat of synthetic enamel paint (finishing coat) over one coat of red oxide primer to new steel surfaces of any description over 10 cm width or girth incl prepration of surfaces complete all as specified.

M&L two coat of synthetic enamel paint (finishing coat) over one coat of pink primer to wooden surfaces of any description over 10 cm width or girth incl prepration of surfaces complete all as specified.

S&F 250mm Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified .

S&F 300mm, ordinary rat tail rod pattern springs including roller and roller plate and welding if required complete all as specified .

S & F Stainless steel Butt Hinges of size 100 mm with ss screw complete all as specified and directed

S & F150 mm size aluminium handles cast type anodised complete all as specified and directed

S & F 150mm Aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

Demolition of brick work built in cement mortar including all quoins, arches, pillar etc including rubbish off the premises beyond MoD Land complete all as specified and directed.

M & L for Brick work with sub class ‘B’ bricks, straight or curved on plan exceeding 6 m mean radius built in cement mortar 1:6, complete all as specified and directed by Engr-in-Charge.

M&L for rendering 15 mm thick ready mix mortar of approved make on fair faces of brick work or concrete surfaces finished even and fair complete as per manufacturer's instructions all as specified and directed by Engr-in-Charge. (Make: Readiplast or equivalent)

M & L Preparing of new plastered surfaces and applying two coats of oil bound distemper over a coat of interior primer and wall, pillers, cornices etc complete all as specified.

Material and labour for preparation of new plastered surfaces of walls, pillars, cornices by brooming down etc and applying two coat of cement base paint over a coat of cement primer etc complete all as specified and directed by Engr -in Charge.

M & L Glazed ceramic joint free coloured tiles of size 300x 450x 6-7mm thick as in dado & skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles laid over and including 10 mm thick rendering in CM 1:4 and after dismantling floor, hearth or wall tiling or terrazo finish including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and dirtected by Engr-in-Charge.

M & L Glazed ceramic non skid joint free coloured tiles of size 400x 400x 6-7mm thick as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles laid over and including 15 mm thick screed bed in CM 1:4 and after dismantling floor, hearth or wall tiling or terrazo finish including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and dirtected by Engr-in-Charge.

Surface excavation not exc 30 cm deep and ave 15 cm deep and getting out in soft/loose soil complete all as specified.

M&L for Excavation in trenches not exc 1.5 mtr wide and not exc 1.5 mtr in depth for foundation etc or for shafts, wells, cesspits etc not exc 10 sqm on plan and not exc 1.5 mtr in depth and getting out in soft/ loose soil complete all as specified

M&L for Returning, filling in, including spreading, levelling, watering and well ramming in layers n.exc 25 cm in soft/loose soil complete.

M&L for Removing surplus excavated soil to a distance n exc 50 mtr & desposting where directed at a level n-exc 1.5 mtr above the starting point complete

M&L for cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) as in foundations, filling and mass concrete complete.

M&L for 40mm thick DPC in cement concrete (1:2:4) B-type (12.5mm graded aggragate) to horizontal & vertical surface including necessary form work and complete all as specified & directed.

M&L for Polythen film 50mm thick micron laid with a coat of bitumin primer @0.30to 0.50 Kg per Sqm on DPC complete all as specified and directed.

M&L earth filling under floor/ floor finishes including spreading and levelling in layers not exc 25 cm thick for well ramming including watering as required complete all as specified and directed.

M&L for hard core of broken stone or boulder of gauge not exc 63mm, deposited, spread and level in layers not exc 15cm thick watered and rammed to a true surface complete all as specified and directed.(75 mm. thk.hardcore n rcc 63 mm)

M&L for RCC (nominal mix) Type B1 1:2:4 (20 mm graded aggregate) for Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete.

M&L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as spd.

M&L for RCC (nominal mix) Type B1 1:2:4 (20 mm graded aggregate) for Columns, pillars, piers, posts and struts complete.

M&L for Form work to flat sided of pillars, post,struts columns,square,rectangle or polygonal etc. rough finished surfaces complete all as specified & directed

M&L for Use and waste of form work to sides and soffits of floor or roof beams, beam haunching, girders, bressumers, lintel beams/lintel band, cantilever and similar work rough finished surface of concrete complete all as specified and directed.

M&L for RCC (nominal mix) Type B1 1:2:4 (20 mm graded aggregate) for Beams, cantilevers, bressummers, lintels over 1.5m span complete.

S&F MS TMT steel bars 5 mm dia and over upto and including 10mm dia as in stirrups, spacers and binders, cut to length , bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete all as specified and directed.

S&F MS TMT steel bars 10 mm dia and over, cut to length , bent to shape required , including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete all as specified and directed.

M&L for brick work with sub class 'B' straight or curved on plan exc 6m mean radius and built in CM 1:4 complete all as specified and directed.

M&L for 15 mm thick rendering in CM 1:6 on stone masonry surfaces or surfaces other than fair faces of brick work, finished fair and even complete all as specified and directed.

M&L for 15 mm thick rendering consisting of two layers, first layer 10 mm thick in CM 1:4 and top layer 5mm thick in CM 1:4 mixed with WPC on fair faces of brick work or concrete surfaces finished fair and even complete all as specified and directed. (Note: WPC shall be measured and paid separately as supply only under relevent items of this Sch/ BoQ).

M&L for prepration of new plastered surfaces of wall and applying of Birla/JK white wall putty approx 2 mm thick as per manufacturer's instruction and make the surface smooth by rubbing with sand papers etc and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and directed.

M&L for preparing new plasteres surfaces and applying of Birla/JK white wall care putty approx 2 mm thick as per manufacturer's instructions and make the surface smooth by rubbing with sand papers etc and applying two coats of Plastic emulsion paint over a coat of interior primer on walls complete all as specified and directed.

S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour as approved having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and including cutting chasing of wall, complete all as specified and directed.

S&F steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St.-240

M&L for 75 mm thick in Plain cement concrete type C2 ( 1:3:6) (using 40 mm graded aggregate) as in plinth protection laid in alternate bays (not exceeding 2 Sqm each) finished even and smooth at top without using extra cement and providing joints throughout the thickness of plinth protection, filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight all as directed at site.

Provn of E-board 4mmthick self design type tiles ceiling on GI Powder coated channel/Tee/Grid of frame work with the following specification including cutting holes to brick wall built in cement mortar & making good in cm 1:3 of cement concrete 1:2:4 type BO as required :- (a) Plugging to wall around the rooms & supplying & fixing GI Powder coated angle of size 25x25x1.0 mm (b) S&F of 1.60 mm dia GI wire suspenders with adjustable clamps including fixing to ceiling dash free fasterers (c) S&F 25 x25 x1.5mm GI Powder coated tee as in main & cross members at 595mm c/c supported suspenders alongwith adjustable clamp to maintain level . (d) S&F E-board 4mmthick self design type ceiling tiles of size 610mm x610mm confirming to relevant IS in squares of GI Powder coated Tee with clips made to shape. Shade and pattern of E- board shall be as approved by GE

Supply and fixing factory made uPVC white colour fixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Glass shall be paid separately). Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

M&L Mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted or forged into spikes, framed guard bar; barred iron doors; ladder; framed balusters; railing; frame work for water tanks and similar work conforming to Fe 290 Gde-E-165 all as specified .

S&F in 10 mm thick slected quality toughned glass cut to size and shape including design film, chamfering of edges cutting holes/ slotes/ for fixing in doors/ windows with all necessary fixing arrangement complete all as specified and directed. Make - Modi, saint gobin or equivalent.

S&F steel tubing medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floors, bore of pipe 15 mm dia.including making hole in RCC slabs for vertical pipes & making good the same with Cement Concrete I:2:4 complete all as specified and as directed by Engineer-in-Charge

All same as per item No 55 here-in-before but 20 mm dia complete all as specified and as directed by Engineer-in-Charge

PVC (SWR) floor trap, plain with grating including jointing with solvent cement all specified & directed 75mm bore complete all as specified and directed.

PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in wall/trenches or in floors 110 mm bore complete all as specified and directed.

PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in wall/ trenches or in floors 75 mm bore complete all as specified and directed.

PVC (SWR) reducers all specified & directed 110 mm dia complete all as specified and directed.

PVC (SWR) vent cowl all specified & directed 110 mm dia complete all as specified and directed.

110mm PVC (SWR) WC connector bent type all as specified & directed

PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement all as specified & directed

S&F rotantional moulded polythylene water storage tanks 1000 ltr capacity (cylindrical vertical with closed top) hoisted and fixed in position complete with ball valve of high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball and screwd for iron pipe 20mm bore omplete all as specified and directed.

PCC (1:2:4) (40MM GRADED AGGRAGATE) in surface channel of drain complete.

Demolition and breaking up SGSW drain pipes 150 mm dia jointed in cement mortar all as specified.

M&L SGSW drain pipes 150 mm dia laid in trenches and jointed in CM (1:3) complete all as specified and directed by Engr-in-Charge.

M&L cement concrete bed (1:4:8) type D-2 using 40mm graded stone aggregate as in bedding to SGSW pipes 150mm dia to drain pipe including formaing cradels in complete all as specified and as directed.

S & F Stop valves 20mm Dia, but fancy type, chromium plated with long shank and cup chromium plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed (Make: as per list)

M&L75 mm thick cement concrete type C-2 1:3:6 (40mm graded aggregate) as in sub base complete all as specified and directed.

M & L Coloured non skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15 mm thick avg screed bed in CM 1:6 complete all as specified and dirtected by Engr-in-Charge .

M & L Coloured Glazed ceramic tiles in vertical surface 450 x 350 x 7-8 mm thick, such as skirting, dados , etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match and over and including 10 mm thick screed bed in CM 1:3 complete all as specified and directed.

S&F in repair for 15 mm dia fancy type CP bib taps half turn with wall flange with screwed down, screwed for iron pipe or for brass ferrule including cap and fixed complete all as specified and as directed by Engineer-in-Charge. (Make: as per list)

S&F in repair 15 mm bore fancy type angle valves half turn chromium plated fancy type with wall flange screwed down high pressure screwed both ends for iron pipes or for unions complete all as specified and as directed by Engineer-in-Charge (Make-Hindware/Jaquar Cat Part No. ORM-10053/MARC

S&F 15 mm bore brass CP single lever Basin mixture for Mixing Hot and Cold water fixed as per manufacture’s manual, with long shunk and cup washers, screwed both ends for iron pipes or for unions complete all as specified and directed Make : Jaquar Cat Part No. OPL-15011B/Cera Cat No F3001461/ Somany Cat No 220912/Hindware F-330014CP complete all as specified and directed.

S&F vitreous china wash basin over counter ovel type size 600x425x195mm Jaquar, Hindware or Parryware fixed over granite slab with all fitting and fixture complete all as specified.

S&F in repairs 32mm Brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed.

S&F 15 mm bore 2 way angel valve with wall flange complete all as specified & directed Make Somany Cat No 220909/CERA Cat No 2008211, MARC MJN-1410.

S & F CP Toilet Paper holder with flap guard complete all as specified and directed Make Cera Cat No F5003110/Somany Cat No 230507/Hindware F-880003

S&F CP Brass soap dish complete all as specified & directed Make Hindware Cat No F880011/Cera F5003106.

S & F Corner Glass Shelf 300 x 300 mm radius consisting of 5.5mm thick sheet glass with chromium plated brass brackets with two No CP Railing in each set complete all as specified and directed Make Cera Cat No F5005103 or equivalent Hindware/Somany.

S & F CP Health Faucet with 1.00 Mtr long CP Flexible pipe as per approved sample complete all as specified and directed Make Hindware Cart Part No F160001/Marc Cat No MAC-3052 Cera Cart No F8030103.

S&F Vitreous china wash down water closet pan wall hung WC 2049 EWC Wall hung Ext. 'P" 655 x 390 x 745 mm cistern 2129 , shoft closed seat cover2356 and 2238 twin flush fitting of Jaquar/ Cera /Hindware, including flushing cistern and fixed with brass screw complete all as specified and as directed.

S&F CP towel rail 600mm long complete all as specified and as directed by Engineer-in-Charge complete all as specified and directed. (Make: as per list)

S&F 450 mm long PVC connection with stainless steel armed 15 mm bore with nuts complete all as specified and as directed by Engineer-in-Charge complete all as specified and directed.

S&F in repairs CP brass shower rose 240x240mm fancy type with chromium plated arm fixed to 15mm pipe of revolving type complete all as specified and directed. (Make Jaquar Model No: OHS-CHR-1629 or equivalent as given in approved make list)

S&F in repairs wall mixer 3-in-1 system with provision for both hand shower and overhead shower complete with 115mm long bend pipe connecting legs and wall fittings and fixtures, flexible tube 8mm dia and 1.50m long with nuts, hand shower 105mm dia round shape single flow with air effective (ABS body and Face plate chromium plated) with rubit cleaning system complete all as spd. (Make Jaquar Cat No : FUS-29281 or equivalent in Kohlar/ Marc)

S & F Solid PVC door frame of size 50mm x 95mm made out of wood grain printed PVC sheet used reinforced with M.S. tube, suppling & fixing in opening as per specification & drawing complete all as specified and as directed.

S & F of factory Made Solid PVC Moulded Door Shutter with particle board core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded prelam coloured PVC Sheet on both face, supplying & fixing in frame at site as per secification & directed

S & F in 250 mm long aluminium alloy, anodised siding door bolts, with has[, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminiums alloy and fixed

M&L 75mm thick PCC 1:4:8 type D-2 (40 mm graded stone agg) as in base to receive floor finishes etc complete all as specified and directed.

M&L 75mm thick PCC 1:3:6 type D-2 (40 mm graded stone agg) as in Sub base to receve floor finishes etc complete all as specified and directed.

M&L for Machine pressed precast concrete interlocking paver block any shape and size with grey cement and pigment conforming to IS 15658-2006 of 60mm thickness, M-35 Grade complete all as specified and directed.

M&L for 50mm thick sand cushion/Sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed.

M&L for Type C1 20mm graded 1:3:6 in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, Hold fast, roof kerb, kneelers, apex stones, bed plates, kerbs water troughs, packing of sides, edges and the like including weathering, slightly rounded or chamfered angles and throating, all as specified and directed.

Material and labour of point wiring complete with 1.5 Sq mm (nominal area) FRLS PVC insulated sheathed and multistranded copper conductor cable ISI marked and including PVC concealed conduit ISI marked of size 20 mm dia medium grade and fittings such as tees, bends, elbow, and FRLS PVC insulated unsheathed 1.5 Sqmm copper conductor mulistranded earth wire, connecting to common earth dolly including Metal Flush Box, Cover plate with frame, cutting chases and making good disturbed surface in CM 1:3 to match with existing surface for one light point exhaust fan point controlled by one 1-way switch complete all as directed.

All as per item No 97 here-in-before but one socket outlet point 5 amps on the same board.

All as per item No 97 here-in-before but one socket outlet point 5 amps on the independent board.

All as per item No 97 here-in-before but with 2.5 Sqmm size on independent board.

S&F modular switch flush type, 6 amps one way,SP,230 volts AC all as directed.

S&F modular socket outlet 6 amps 5 pin 2 module all as directed.

S&F modular socket outlet 6 & 16 amps 6 pin multipurpose combined 2 module all as directed.

S&F modular switch flush type, 16 amps one way,SP,230 volts AC all as directed.

S & F of Ceiling rose, 3 terminal , pvc/polycabonate, isulated body all as specified and directed.

S&F LED energy efficient integrated battens fittings, PVC extruded heat sink with shatter proof opal shell of polycarbonate compound, 20 Watt cool/warm white as per site requirement complete all as specified and as directed.

S&F LED energy efficient integrated battens fittings, PVC extruded heat sink with shatter proof opal shell of polycarbonate compound 10 Watt , cool/warm white as per site requirement complete all as specified and as directed.

S&F of energy efficicent LED fittings 45W LED 6K suitable for builing security light pressure die cast aluminium roadway luminaire with high power LEDs and HF electronic driver complete all as specified and as directed.

S & F of street light bracket incl clamp, nut and anchor bolt etc make to shape for street light fitting made out of GI pipe light grade 25 mm bore 1.0 mtr long on bend to shape the top of wall of existing building complete all as specified and directed.

S&F of Ventilating fan 250 mm sweep plastic body type including self cousing louver and making all electric connections, complete all as specified and as directed.

S & F of Distribution Board double Door made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection surface mounting SPN 4 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCB’s and isolators etc complete all as specified and directed.

S & F of MCB' B' Curve type suitable for 240 volts AC supply, SP with over load and short circuit protection and rupturing capacity not less than 10 KA of capacity 6 to 16amps complete all as specified and directed.

S & F of Isolator suitable for 240 volts AC supply, SPN of capacity 32/40 Amps complete all as specified and directed.

S&F Geyser 25 litre capacity vertical type with steel tank and glass inner linen , 5 star rating complete including fastners (4No.) for hanging and CP and PVC connection for inlet and outlet upto stop cock, complete all as specifed and as directed.

S & F of aluminium cable 1100 Volt grade, served with inner sheathing of PVC tape and overall PVC sheathed twin core Alimunium cable circular of size 6 Sqmm ISI marked in service connections, including taking down old unserviceble cable complete all as directed.

S&F of rigid non metallic PVC conduit 25 mm dia inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hook etc complete surface mounted / concealed and making good the surface all as specified and and as directed.

Supply and fixing in replacement of high pressure booster pump pressure tank, coupled with electric motor of capacity 0.18 HP, discharge min 32 LPM,230 volts, single phase, 50 Hz incl. onnecting accessories of GI i.e bend, nipple, socket, tee of requisite size etc incl cutting of existing pipe complete all as directed.

Supply and fixing 25mm dia CPVC pipe SDR11 and plain CPVC SDR 11 fittings on wall / floor/ ceiling complete all as specified and as directed

Supply and fixing 25mm dia CPVC stop valve complete all as specified and as directed

K S CONSTRUCTIONS (BID ID -3158049)

tarun construction co (BID ID -3157095)

Vipul Construction (BID ID -3157276)

garnet engineers contractors (BID ID -3157826)

M/s Durga Traders (BID ID -3157360)

sunil traders (BID ID -3157847)

M/S MSD & Associate (BID ID -3160904)

aggarwal engineers contractors (BID ID -3159520)