Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹21.6 LAccepted-AOC FLAT NO 151 BLOCK NO 1 DIAMOND SQUARE CGHS LTD PLOT NO 13A SECTOR 6 DWARKA NEW DELHI 110075 | NEW DELHI | SOUTH WEST DELHI | DELHI | 110075 | L1 | Accepted-AOC L1 | |
| 2 | L2₹22.3 L+₹75,306 (3.49%)Rejected-Finance A 303 VEENA CGHS LTD PLOT NO 5D SECTOR 22 DWARKA NEW DELHI 110077 | NEW DELHI | SOUTH WEST DELHI | DELHI | 110077 | L2 | Rejected-Finance Being not lowest tenderer | |
| 3 | L3₹23.0 L+₹1.4 L (6.51%)Rejected-Finance 3788 SHAH GANJ GB ROAD NEW DELHI 110006 | NEW DELHI | DELHI | DELHI | 110006 | L3 | Rejected-Finance Being not lowest tenderer | |
| 4 | L4₹25.0 L+₹3.4 L (15.8%)Rejected-Finance | L4 | Rejected-Finance Being not lowest tenderer | |
| 5 | L5₹25.4 L+₹3.8 L (17.7%)Rejected-Finance 622 A STREET NO 3 FIRST FLOOR SHAKTI NAGAR BATHINDA 151001 PUNJAB | BATHINDA | PUNJAB | 151001 | L5 | Rejected-Finance Being not lowest tenderer |
| Sl No | Description | Qty | Unit | Ridhi engineers and builders L2 | Commercial Traders L3 | Vijaypower Generators Limited L7 | Mani Control System L4 | BRIJ MOHAN LAL AND CO. L1 | M/S ADHIKARI CONSTRUCTION CO. L6 | Truly Technos LLP L5 |
|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Supply and Fabrication of trolley to accommodate 400 KVA transformer with LT panel, including HT & LT cables and with overrall size not less than 2.20 mtr X 2.50 mtr using MS Chnnel of size 100X50 mm and angle iron 50X50X6 mm and MS flat of 50X6 mm Wherever required including base of MS chequered sheet 10 gauge fixed properly welded on chasis including fencing all around with MS angle iron 40X40X6 mm and MS flat 40X6 mm with XPM mesh, cage of 50X50 mm mesh made of 4 mm dia GI wire of 2 mtr height with openable door and locking arrangement on two sides duly painted with two coats of synthetic enamel paint over a coat of red oxide steel primer, with towing hook of channel / angle iron, fixed with trolley for easy movement from one place to another place. It shall not be less than 1.25 mtr length from the body of trolley complete all as specified and directed with the followings :- (a) S&F tyre tube of size 7.50X16 on suitable size of wheel crum - 04 Nos
(Make: MRF / CEAT) (b)S&F leaf soring set of 13 Nos leafs with U camos - 4 set suitable to take full load of trolley, Panel and Transformer
(c) S&F axe of size 2600 mm length and made of MS
(d) S&F danger notice plate/board of 11 KV on each side of trolley -04 Nos (e) The cost of any MS work required for fixing of transformer, LT panel shall deemed to be included in the qutoed rate.
Note :- (i) Any other work/item not mentioned above but necessary for smooth functioning of the trolley shall be included in the rate quoted by the contractor. (ii) Drawing has to be approved by GE as per site conditions before execution of works. | 1 | Each job | 2,25,000 ₹2,25,000 | 1,98,000 ₹1,98,000 | 2,76,000 ₹2,76,000 | 2,75,000 ₹2,75,000 | 1,24,000 ₹1,24,000 Lowest | 3,99,999 ₹3,99,999 | 1,95,000 ₹1,95,000 |
| 2.00 | Supply, Installation, testing and commissioning of copper wound step down ISI ,marked and BEE star lebelled transformer outdoor type complete with standadrd fitting, HT 11 KV 3 phase LT 433 volt, 3 phase 4 wire with off laod tap changer having tapping range 7.5% in steps of 2.5% ranting of 400KVA capacity as per IS 1180:2014 and IS 2026:2011 . The transformer shall be complete with all standard fittings and accessories, gauges first fill of transformer oil upto appropriate level etc, jointing materials connected with electric system etc complete all as specified and directed by with the following accessories (a) primary HT side having HT porcelain bushing 3 Nos with brass gun metal bushing, rods complete with nuts and washers.with MS cable box sealed for HV suitable for 11 KV .(b) one cable box on LT side for mounting two LT cable cosisting of 4 Nos, porcelain with brass bushing rods complete with nuts and washer with two nos. cable gland suitable for LT UG cable providing with bimetalic lugs. (c) Oil conservator with filler type drain valve and oil level gauges. (d) Dehydrating breather with first fill of dehydrating agent ( silica gel). (e) Explosive vents. (f) thermometer pocket on tank cover including thermometer. (g) Rating plate and terminal marking plate. (h) The earthing terminal two nos. to tank to facilitate fixing to earth strip. (i) Oil level gauge (j) Lifting lugs. (k) Oil filling hole with cap/plug with connection plate complete. (l) Air relief valve plug. (m) Buchholzs relay for alarming & tripping of circuit breaker . Note: (i) Transormer should be tested on factory before dispatch to site. (ii) The transormer shall be complete with standard fittings all as specified conforming to IS:1180(part) 2014, IS 2026:2011 and manufacturer shall hold licence/certificate from BIS to this effect, (iii) The transformer will have its initial oil illing to appropriate level (cost of oil including testing with desired dielectric strength is included) (iv) All fittings required to install / mounted the transformer on trolly as mentioned in item no 1 above. | 1 | Each | 9,63,250 ₹9,63,250 Lowest | 12,60,000 ₹12,60,000 | 21,30,000 ₹21,30,000 | 13,66,000 ₹13,66,000 | 12,80,000 ₹12,80,000 | 14,99,999 ₹14,99,999 | 14,95,000 ₹14,95,000 |
| 3.00 | Supply , connecting, testing and commissioning HT cable XLPE insulated, screened, galvanised steel strip or wire armoured, electric power cables (heavy duty) with aluminium conductor, 11000 volts Earthed, grade cross sectional area 95 Sqmm 3 core, laid in trenches/ fixed to pole/ passing through pipe, ISI marked as per IS : 7098 (part - 2) compelete all as specified and directed. | 80 | RM | 800 ₹64,000 | 1,080 ₹86,400 | 1,098 ₹87,840 | 1,050 ₹84,000 | 649 ₹51,920 Lowest | 999 ₹79,920 | 1,250 ₹1,00,000 |
| 4.00 | M&L for Cable jointing kit for 11 KV (Earthed) grade cable for outdoor end termination cold shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 95 Sqmm complete all as specified and directed. | 4 | Each job | 7,000 ₹28,000 | 3,000 ₹12,000 | 15,144 ₹60,576 | 1,500 ₹6,000 Lowest | 3,449 ₹13,796 | 2,999 ₹11,996 | 7,800 ₹31,200 |
| 5.00 | Supply, Laying, connecting, testing and commissioning LT cable XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross- sectional area 400 Sqmm 3.5 core laid in trenches/ connected to transformer/ fixed to pole/ passing through pipe, ISI marked as per IS 7098 (part-2) complete all as specified and directed. | 60 | RM | 2,150 ₹1,29,000 | 2,170 ₹1,30,200 | 2,565 ₹1,53,900 | 2,200 ₹1,32,000 | 1,089 ₹65,340 Lowest | 1,299 ₹77,940 | 2,980 ₹1,78,800 |
| 6.00 | S&F HT 11 KV, 3 phase, 50 Hz, totally enclosed, metal clad, cubicle type, floor mounted, free standing, dust and vermin proof, sheet steel enclosure of thickness not less than 3.15 mm, outdoor type Vacuum Circuit Breaker (VCB) with rupturing capacity not less than 250 MVA, rated normal current 400 Amps, rated short time current withstand capacity 25 kA for 3 sec, with operating mechanism motor/hand spring charged type, provided with overload and earth fault protection (IDMT relay), CTs, PTs, microprocessor based protective relays, ammeter, voltmeter with selector switches, indicating lamps, trip circuit supervision relay, anti-pumping device, interlocking arrangement, space heater with thermostat, complete with all accessories, busbar chamber, cable termination box with epoxy/moulded type bushings and required earthing, complete all as specified and as directed | 1 | Each | 7,50,000 ₹7,50,000 | 5,95,750 ₹5,95,750 | 5,25,000 ₹5,25,000 | 6,25,000 ₹6,25,000 | 6,09,000 ₹6,09,000 | 5,99,999 ₹5,99,999 | 5,10,000 ₹5,10,000 Lowest |
| 7.00 | M&L for reinforced cement concrete for the foundation of mix 1:2:4 type B-1 (using 20 mm graded stone aggregate) for mounting of outdoor HT 11 KV Vacuum Circuit Breaker (VCB), including necessary excavation in any type of soil, formwork, foundation bolts, grouting, finishing smooth even surface, curing and disposal of surplus soil, complete all as specified and as directed | 2 | Cum | 31,500 ₹63,000 | 4,000 ₹8,000 | 9,600 ₹19,200 | 1,500 ₹3,000 Lowest | 1,999 ₹3,998 | 2,999 ₹5,998 | 5,000 ₹10,000 |
| 8.00 | M&L for earthing and Earth continuity conductor complete with galvanised steel earth plate electrode of size 600 mm × 600 mm × 6 mm thick, buried directly in ground vertically to a depth not less than 2.25 metres below ground level with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised iron
strip 25×4mm as earthing lead earth by means of bolts, nuts, check nuts and washers of galvanised iron/steel, all as shown in electrical plate No. 3 of SSR Part-I, connected to earthing test point, including excavation in any type of soil, returning, filling in layers not exceeding 25 cm, ramming, watering, removal of surplus soil, PCC chamber in 1:3:6 type C1 with 40 mm thick RCC cover in 1:2:4 type B1 reinforced with 8 mm dia TMT bars @ 100 mm c/c both ways, funnel, wire mesh, GI watering pipe medium grade 20 mm dia with funnel, charcoal and salt filling, complete including testing on completion, all as specified and as directed | 2 | Each | 5,000 ₹10,000 | 3,500 ₹7,000 Lowest | 5,400 ₹10,800 | 3,500 ₹7,000 Lowest | 4,445 ₹8,890 | 4,999 ₹9,998 | 9,000 ₹18,000 |
Tender Value
₹30.1 L
EMD Value
₹60,300
Closing Date
17 Dec 2025, 6:00 pmClosed
CWE (AF) Tughlakabad
HQ CWE AF TUGHLAKABAD AF STATION, TUGHLAKABAD PO SANGAM VIHAR NEWDELHI-110080
PROVISION OF STANDBY TROLLEY MOUNTED TRANSFORMER 400KVA AT 27 ED AND VACCUM CIRCUIT BREAKER (QTY-01) FOR 200 KVA TRANSFORMER AT 31 MCU UNDER GE (AF) GURGAON NO.1
2025_MES_742254_1
CWE/TKD/GUR/TOKEN-54 OF 2025-26
Open Tender
Electrical and Maintenance Works
Item Rate
180 days
GE (AF) Gurgaon No 1
AS PER TENDER CONDITIONS
7 documents required · 7 mandatory
₹0
₹60,300
30 Jan 2026
1 Dec 2025
19 Dec 2025
1 Dec 2025
17 Dec 2025
11 Dec 2025
Amount
Supply and Fabrication of trolley to accommodate 400 KVA transformer with LT panel, including HT & LT cables and with overrall size not less than 2.20 mtr X 2.50 mtr using MS Chnnel of size 100X50 mm and angle iron 50X50X6 mm and MS flat of 50X6 mm Wherever required including base of MS chequered sheet 10 gauge fixed properly welded on chasis including fencing all around with MS angle iron 40X40X6 mm and MS flat 40X6 mm with XPM mesh, cage of 50X50 mm mesh made of 4 mm dia GI wire of 2 mtr height with openable door and locking arrangement on two sides duly painted with two coats of synthetic enamel paint over a coat of red oxide steel primer, with towing hook of channel / angle iron, fixed with trolley for easy movement from one place to another place. It shall not be less than 1.25 mtr length from the body of trolley complete all as specified and directed with the followings :- (a) S&F tyre tube of size 7.50X16 on suitable size of wheel crum - 04 Nos (Make: MRF / CEAT) (b)S&F leaf soring set of 13 Nos leafs with U camos - 4 set suitable to take full load of trolley, Panel and Transformer (c) S&F axe of size 2600 mm length and made of MS (d) S&F danger notice plate/board of 11 KV on each side of trolley -04 Nos (e) The cost of any MS work required for fixing of transformer, LT panel shall deemed to be included in the qutoed rate. Note :- (i) Any other work/item not mentioned above but necessary for smooth functioning of the trolley shall be included in the rate quoted by the contractor. (ii) Drawing has to be approved by GE as per site conditions before execution of works.
Supply, Installation, testing and commissioning of copper wound step down ISI ,marked and BEE star lebelled transformer outdoor type complete with standadrd fitting, HT 11 KV 3 phase LT 433 volt, 3 phase 4 wire with off laod tap changer having tapping range 7.5% in steps of 2.5% ranting of 400KVA capacity as per IS 1180:2014 and IS 2026:2011 . The transformer shall be complete with all standard fittings and accessories, gauges first fill of transformer oil upto appropriate level etc, jointing materials connected with electric system etc complete all as specified and directed by with the following accessories (a) primary HT side having HT porcelain bushing 3 Nos with brass gun metal bushing, rods complete with nuts and washers.with MS cable box sealed for HV suitable for 11 KV .(b) one cable box on LT side for mounting two LT cable cosisting of 4 Nos, porcelain with brass bushing rods complete with nuts and washer with two nos. cable gland suitable for LT UG cable providing with bimetalic lugs. (c) Oil conservator with filler type drain valve and oil level gauges. (d) Dehydrating breather with first fill of dehydrating agent ( silica gel). (e) Explosive vents. (f) thermometer pocket on tank cover including thermometer. (g) Rating plate and terminal marking plate. (h) The earthing terminal two nos. to tank to facilitate fixing to earth strip. (i) Oil level gauge (j) Lifting lugs. (k) Oil filling hole with cap/plug with connection plate complete. (l) Air relief valve plug. (m) Buchholzs relay for alarming & tripping of circuit breaker . Note: (i) Transormer should be tested on factory before dispatch to site. (ii) The transormer shall be complete with standard fittings all as specified conforming to IS:1180(part) 2014, IS 2026:2011 and manufacturer shall hold licence/certificate from BIS to this effect, (iii) The transformer will have its initial oil illing to appropriate level (cost of oil including testing with desired dielectric strength is included) (iv) All fittings required to install / mounted the transformer on trolly as mentioned in item no 1 above.
Supply , connecting, testing and commissioning HT cable XLPE insulated, screened, galvanised steel strip or wire armoured, electric power cables (heavy duty) with aluminium conductor, 11000 volts Earthed, grade cross sectional area 95 Sqmm 3 core, laid in trenches/ fixed to pole/ passing through pipe, ISI marked as per IS : 7098 (part - 2) compelete all as specified and directed.
M&L for Cable jointing kit for 11 KV (Earthed) grade cable for outdoor end termination cold shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 95 Sqmm complete all as specified and directed.
Supply, Laying, connecting, testing and commissioning LT cable XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross- sectional area 400 Sqmm 3.5 core laid in trenches/ connected to transformer/ fixed to pole/ passing through pipe, ISI marked as per IS 7098 (part-2) complete all as specified and directed.
M&L for reinforced cement concrete for the foundation of mix 1:2:4 type B-1 (using 20 mm graded stone aggregate) for mounting of outdoor HT 11 KV Vacuum Circuit Breaker (VCB), including necessary excavation in any type of soil, formwork, foundation bolts, grouting, finishing smooth even surface, curing and disposal of surplus soil, complete all as specified and as directed
M&L for earthing and Earth continuity conductor complete with galvanised steel earth plate electrode of size 600 mm × 600 mm × 6 mm thick, buried directly in ground vertically to a depth not less than 2.25 metres below ground level with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised iron strip 25×4mm as earthing lead earth by means of bolts, nuts, check nuts and washers of galvanised iron/steel, all as shown in electrical plate No. 3 of SSR Part-I, connected to earthing test point, including excavation in any type of soil, returning, filling in layers not exceeding 25 cm, ramming, watering, removal of surplus soil, PCC chamber in 1:3:6 type C1 with 40 mm thick RCC cover in 1:2:4 type B1 reinforced with 8 mm dia TMT bars @ 100 mm c/c both ways, funnel, wire mesh, GI watering pipe medium grade 20 mm dia with funnel, charcoal and salt filling, complete including testing on completion, all as specified and as directed
Ridhi engineers and builders (BID ID -3500531)
Commercial Traders (BID ID -3501000)
Mani Control System (BID ID -3500374)
Truly Technos LLP (BID ID -3500903)
M/S ADHIKARI CONSTRUCTION CO. (BID ID -3496638)
Vijaypower Generators Limited (BID ID -3501014)
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.38 MB
BOQ_831168.xls
BOQ • 0.28 MB
Specialconditions.pdf
Tender Documents • 2.39 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .