REPAIR / MAINT ELECTRICAL INSTALLATION WITH CONNECTED ITEMS AT OP AREA AND TECH AREA UNDER AGE (I) AF MANAURI

Amount

Excavation in trenches not exc 1.5 M wide and not exc 1.5 M in depth for pipe line, etc getting out in soft/ loose soil and levelling of bottom surface to required level complete all as specified & directed.

Returning filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 CM complete all as specified & directed.

Removal of surplus soil to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified & directed.

Supply, laying and spreading of dry (Ganga) sand, free from organic impurities for cushioning as in trenches 8cm depth below cable and 15cm above cable and punned to 10cm depth complete all as specified & directed. Note :- Punned thickness shall be considered for measurement purpose.

M&L brick, sub class 'B' bricks laid dry, flat, length equal to width of brick over sand cusioning in trenches for cable protection complete all as specified & directed.

Material & labour for cutting /boring to plinth protection/ hard standing / road etc in suitable depth to across the GI pipe size upto 50 mm dia of bore for drawn through XLPE under ground cable for giving mechanical protection to cable complete all as directed. Note : Quoted rate shall be included the cost of required material for repairing to disturbed surface complete all as per existing site and all as directed by Engineer-in-charge.

Material & labour for continuous brick edging with width equal to the depth of brick sub class 'B' laid dry on end vertically, including necessary excavation and removing surplus spoil to a distance not exceeding 50m complete all as specified & directed.

M&L for providing loose filling with broken stone aggregate 40 mm to 50 mm size structure from ground level grouted below ground level complete all as specified & directed.

M & L Painting to existing steel four pole structure of 11 mtr height including mild steel work like cross arms, clamps, pipe channel, bracing etc after cleaning and prepration of surfaces painting externally above painting depth with one coat of aluminum paint over a coat of aluminum primer including preparation of existing surfaces and marking pole numbers in 15 cm dia with approved colour in circular and making 03 Numbers & 02 Numbers of bands & strips with 30 cm wide fluorescent paint from bottom of pole to 1.5 mtr height of pole complete all as specified and as directed. Note : Cutting of bushes & tree branches upto 3 Mtrs height of pole shall be deemed included in quoted unit rate.

M&L for painting to steel structure/ fancing (both side wall)/ gate / board etc in any size/ make / thickness etc with MS fittings such as cross arms, clamps, pipe channel, bracing / wire mesh fencing ( both side will be considered as one unit) installation board etc after removing ,scraping cleaning etc to old paint using shyenthic enamel paint applying two coat (one as finishing ) over one coat of red primer oxided by paint spray gun including marking/ written indication sign/ words in diffrent colour etc complete all as site required and directed. Note : Paint colour shall be approved by Deptt.

M&L for Earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick surrounded with charcoal and salt, buried directly in ground (earth pit not less than 2.25 metre deep below ground level) with top edge of plate not less than 1.5 metre below normal ground level connected to galvanized earth lead using GI earth strip in size 32 x6 mm means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical Plate No 3 of MES SSR Part-I connected to main switch board or main control board all as specified and testing on completion including provision of earth wire protected by galvanized iron 15 mm dia light grade pipe and watering pipe shall be 20 mm bore light grade including all excavation and earth work in any type of soil, PCC pit with pre-cast RCC cover, charcoal/salt, funnel etc complete all as specified & directed.

Notes for Serial Item No. 11.00: (i) The concrete pit shall be PCC 1:3:6 type C-1, 40 mm thick pre cast cover slab of RCC (1:2:4) type B-1 using 20mm graded stone aggregate reinforced with 8mm TMT bars @ 10 cm C/C on both sides with suitable cast iron handle shall be provided in lieu of cast iron cover shown in electrical plate No 3 of MES SSR Part-I. (ii) Item includes the cost of 7.50m GI pipe for protection of earth wire/strip Any variation in length shall be adjusted through deviation order. (iii) Item includes cost of 7.50m earth lead wire/strip. Any variation in length shall be adjusted through deviation order. (iv) PCC pit shall be provided at least 500 mm away from the pit and not on the earth pit itself and the extra cost of additional length of watering pipe, bends, elbow etc shall be deemed included in the unit rate.

M&L fabrication, installation sign board indentifier / marker ( 25 cm x 25 cm board Preferably metallic in triangle shape) of 22 SWG and stand of made out of angle iron of size 40 x 40 x 6mm thick of length 90cm (60 cm above ground level) and duly painted with two coat of syenthetic enamel paint of RED colour for background over a coat of red oxide primer and marked 'EQ' letters of size 1 inch height in black paint text as directed and to be grouted 2 feet from the ground level including all excavation and earth work. It will mention the type of earthing, number of the earth pit and the total number of particular type of earthing for that equipment. For example, a equipment earthing pit can be marked as EQ 1/4 which means equipment earthing EQ No 1 out of 4 EQ earth pits for the equipment complete all as specified & directed.

Supply and fixing Rolled Miled steel Framed work as cable trench cover confirming to Fe 410-W (gde-E-250) quality-A with gusset plates, rails braces, etc. complete, drilled for fixing of steel sheeting or other covering and hanging and fixing including taking out rusted frame complete with plaster and brick work as per site requirement complete all as specified & directed.

Material & Labour for chemical to burn out the shrub/grass/ unwanted small trees etc 100% in outfit area of near building earthing pit in AOR spread by using spray gun equally in a given time interval as directed. Note: Chemical sample shall be supplied in sealed container 2 to 5 Ltrs each after approved by Deptt. Make :- Glycel

M & L providing PCC 1:4:8 type D-2 (Using 40 mm graded stone aggregate) as in foundation of size 150 mm x 150 mm cross section, planting depth 0.30 Mtr for concrete encasing the pole upto GL and including form work finished even and fair complete all as specified and directed.

M & L providing PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) for plinth block/Coller above GL 150 mm high of size 150 mm x 150 mm and including form work finished even and smooth with using extra cement complete all as specified & directed.

Supply, fixing , connecting and testing of LED Decorative Post top Lotus plus (Integral) light fitting 40 watt powder coated aluminium body with clear/opal diffuser suitable for landscape lighting in 5700K CCT, IP65 complete Cat part No PGR0201010 PCGLPT 01 40 C make Polycab or equivalent in Bajaj/Philips/CG/Havells prewired complete fix on pillar with suitable size of 40 mm GI pipe as required with bolts, nuts & washers and connect with 3 core 4.00 sqmm PVC insulated cable and PVC conduit 20 mm upto control box to Decorative Post top Lotus plus (Integral) street light luminaries fitting 40 watt complete all as specified and directed by Engr-in-Charge Note: The unit rate deems to be include in cutting, chassing on pillar suitable for fixing of 40 mm GI Pipe and Accessories.

Supply, laying jointing and testing underground cable of size 16 Sqmm 4 core, 1100 volts grade, XLPE insulated screened PVC bedded galvanized steel strip or wir armoured electric power cable heavy duty, with multi-stranded aluminium conductor laid in trenches, passing through pipe duscts makinng electrical connection with including suitable size lugs proper crimped by crimping tool, complete all as specified & directed.

S&F in replacement Substation sign board made out of 3 mm thick aluminium composite panel sheet 1200 mm x 1200 mm including retro reflective sheeting on both side fixed on 50 mm dia stainless steel pipe of grade -304 (non scratchable) of wall thockness not less than 14 gauge including providing letters of not less than 75 mm height fixed on position with 50 mm dia stainless steel pipe (wall thickness of pipe shall be not less than 14 guage and vertical height of board above GL should be 2.4 m & below GL 60 cm deep ) and stainles steel pipe embedded in PPC 1:3:6 type C-1 using 20 mm graded stone aggregate in post holes of size 250 mm x 600 mm including 6 mm thick mild steel base size 200 mm x 200 mm X 600 mm including 6 mm thick mild steel base plate of size 200 mm x 200 mm x 6 mm thick for anchoring of post applying of two coats of anti corrossive paint on anchoring plate and writing letters and numbers on both sides of the board in English and Hindi (as required at site) should be as per IRC 30-1968 using 3M material, numbers of letters exc 50 but n exc 250 on each of the board etc complete all as specified and directed. Note : Square sign board should be cut in one coenerin half of width & depth of it complete all as specified & directed.

Supply of Elegant look Anchor by Panasonic make 40 W AIO LED Solar Street lights having extruded alluminium housing, 100 Wp or more Mono Crystalline Panel/Laminates ((Made in India) fixed on the top of the luminaire housing, maintenance free 12.8 volts 36 Ah or more LiFePO4 battery(BIS certified) , BMS, MPPT charge controller, PIR sensor to provide 2 days (24 hrs ) back up in dimming mode . The luminaire is having IP 65 protection for critical components, IK 07 and having lumen output of > 6400 lm as per LM 79 report of third party NABL lab . The lumen efficacy should be > 160 lm/w and the maximum wattage of the AIO street light luminaire shall not be more than 40 W to deliver 6400 lm . Both the luminaire and Mono Crystalline Panel must be manufactured in India. The Solar lighting company must submit the third party NABL lab reports to justify the Lumen efficacy, luminaire output , IK 07 and IP 65 protection ( In house NABL lab reports will not be acceptable). The complete Solar lighting system must be warrantied for a period of 5 years . The Solar lighting companies must be having toll free base service network to provide immediate after sales service through their service network available in different districts of the state .The Solar lighting companies should submit the lighting design report prepared by their in house lighting design team if required as per the direction of engineer in charge. Lenses should be provided for effective distribution of light on the ground .The AIO solar street lights shall be of Anchor by Panasonic make PA040W11MLF2401or equivalent in Philips/Crompton/Havells

Taking down old unsv PCC pole and Supply,erecting and installation of GI octagonal type, swaged, pole of overall length 6 mtr having maximum tensil strength 30 KGf/mm2, with made out of 4 Nos 40 mm dia MS pipe 1.5 mtr long to be jointed on LT pole incl fabrication work with approved design by Engr-in-charge for fixing of 4 Nos street light fitting.A through hole of 14 mm dia shall be provided at height of 1.00 mtr from base plate for inserting 2 core cable from junction box to top of the pole and top portion shall be fabricated for fixing Solar street light fittings complete with base plate, having suitable dia of hole through the pole with Nuts and bolts for earthing arrangement, bottom portion of GI pole having 135 mm outer dia 3.25 mm thickness and top bottom having 70 mm dia outer dia 3.25 mm thickness, with designed cap suitable on top of the pole, approximate weight of the pole 75 Kg, respectively bottom plate size 225 x 225 x 12 mm including 4 Nos foundation nut bolts 20 mm x 700 mm, including 4 Nos swan neck bracket as per approved design by Engr-in-Charge, including RCC work as per approved company drawing complete all as specified and directed by Engr-in-charge. Note :- Contractor shall be quote the rate including RCC Work for foundation, 4 Nos Nut bolts 20 mm x 700 mm, four nos of swaged type bracket with fabrication work as per approved design by Engr-in-Charge will be deemed to be included in the unit rate.

Note :- (i) Credit shown in credit schedule of tender document shall be considered by the tenderer while quoting the rates of various items. The same shall be recovered from various payment to contractor before handing over old material. The contract amount shall be arrived at after deduction of Schedule of Credit from the total quoted amount in BOQ. (ii) Make of material shall be as per mentioned in Particular specifications or Appendix 'B' to Particular specifications as approved by AGE (I) AF manauri

M/S SATISH KUMAR (BID ID -3107055)

Pleiad Complex On (BID ID -3107193)

YOU SEE CONSTRUCTION (BID ID -3102718)

M/S AM ENTERPRISES (BID ID -3102535)

Z N Enterprises (BID ID -3107221)

M/S vibhuti enterprises (BID ID -3106244)