COMPLETION OF INCOMPLETE WORKS OF REPAIR TO LEAKAGE/SEEPAGE AND SUNKEN FLOOR TREATMENTTO OTM/MD ACCN AND CERTAIN B/R REPAIRS AND JOINERY TO OFFR QTRS/MNS QTRS AT CHAF BNGALORE

M&L for cement concrete type F2 (1:7:12) using 40mm graded aggregate as in foundations, filling and mass concrete in sunken floor complete all as specified and as directed.

M&L for Cement concrete 1:3:6 type C0 using 12.50 mm graded stone aggregate incl weathering slightly rounded or chamfered angles and throating complete all as specified and as directed.

M&L Precast cement concrete block masonry with solid blocks,in PCC 1:3:6 Type C1 (20mm graded aggregate) exc. 10 cm in width and setting in mortar 1:6 complete all as specified and as directed

Cutting chases , pinning in, making good to facings for any type wall where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 20cm girth complete all as specified and as directed.

Cutting chases, pinning in. making good to facings for any type wall where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting exc 10 cm & not exc 20 cm girth complete all as specified and as directed.

Cutting holes for pipes for a superficial area exceeding 150 Sqcm and not exceeding 400sqcm into or through brick walls built in cement mortar and making good in cement mortar 1:3 or 1:2:4, type B1 complete all as specified and as directed. Note :- Quoted rate shall deemed to include cost of scaffolding or ladders etc required for approaching for repair work ( Ground floor to Seventh Floor).

Cutting holes for pipes for a superficial area exceeding 150 Sqcm and not exceeding 400sqcm into or through stone wall built in cement mortar and making good in cement mortar 1:3 or 1:2:4, type B1 complete all as specified and as directed. Note :- Quoted rate shall deemed to include cost of scaffolding or ladders etc required for approaching for repair work ( Ground floor to Seventh Floor).

Forming jambs,with cement mortar 1:6 etc., to openings (to foregoing items above ), including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work, complete all as specified and as directed.

Supply only integral Water proofing compound complete all as specified and as directed.

S&F 35mm thick second class hard wood Gauzed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., divided in to squares with plain, chamfered or rounded mitred and rebated sash bars any numbers, edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass, etc, size of members of shutters as specified in SSR Part I, section 8, clause 8.24 (a) supplied and fitted to chowkats complete all as specified and as directed.

S&F 35 mm thick factory made second class hard wood, kiln seasoned and chemically pressure treated plain framed, panelled shutter (Two panel) with lock rail and panel of 9 mm BWP Commercial ply or 12 mm veneered particle board with commercial face veneers supplied and fitted to chowkats complete all as specified and as directed.

S&F 30 mm thick factory made flush shutter, solid core construction with block board core and plywood face panels, commercial type on both sides kiln seasoned and chemically pressure treated complete all as specified and as directed.

Taking down Chowkats or frames not exc 1.5 Sqm each (Without taking off shutters from the frames) and stacking at site where directed complete all as specified and as directed.

Taking down chowkat or frames exc. 1.5 sqm and not exc. 4 sqm and stacking at site where directed complete all as specified and as directed.

Taking down chowkat or frames not exc. 1.5 sqm and and stacking at site where directed complete all as specified and as directed.

Taking down Chowkats or frames exceeding 1.5 Sqm but n. exc 4.00 sqm (Without taking off shutters from the frames) and stacking at site where directed complete all as specified and as directed.

Taking down shutters of any description not exceeding 1 Sqm each and stacking at site where directed complete all as specified and as directed.

Easing of door / window shutters of any size/ any number of panels for easy closing/ opening / tightening of hinges or changing the position of hinges, adjustment of tower bolts, sliding door bolts etc complete all as specified and as directed.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement complete all as specified and as directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with 19mm x 19mm MS square tube EPDM rubber gasket weather seal to be provided through out the frame, the profile shall be mitre cut at two corners and jointed by inserted 2mm of 150mm long bracket of 15mm x 15mm MS square tube inside the 19mm x 19mm MS square tube and suitable screwed the door frame shall be fixed to the wall using PVC fasteners. A minimum of 6 Nos screws to be provided for each frame as hold fast complete all as specified and as directed. Note: The quoted rates are deemed to be included for cutting holes, providing concrete for hold fast and making good to the disturbed surfaces.

S&F in repairs Door closer hydraulically Aluminium (extruded section) regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and as directed.

S&F Alluminium alloy wire cloth, 0.45 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium wire staples complete all as specified and as directed.

S&F in repairs stainless steel wire cloth,0 .36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

Supply only pivot hinges suitable for aluminium door shutters complete all as specified and directed.

Supply only pivot hinges suitable for stainless steel door shutters, fixed in repairs all as specified.

Supply only 100mm size anodised extruded aluminium alloy butt hinges with galvanised mild steel hinge pin, complete all as specified and directed.

Supply only 150mm size Aluminium alloy extruded handle, anodised, cast type suitable for aluminum door/window shutters, complete all as specified and directed.

S&F 100mm MS butt hinges, medium weight, cold rolled mild steel complete all as specified and directed.

S&F 75mm MS butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and directed.

S&F 40 mm continuous (piano) hinges, mild steel, bright finish or electrogalvanised Width of flaps (when open) complete all as specified and directed.

S&F in repairs 100mm MS butt hinges, medium weight, cold rolled mild steel complete all as specified and as directed.

S&F in repairs 75mm MS butt hinges, medium weight, cold rolled mild steel, and fixed complete as specified and as directed.

S&F 150 mm long Extruded Aluminium alloy handles, fabricated type, anodised complete all as specified and as directed.

S&F 125 mm long Extruded Aluminium alloy handles, fabricated type, anodised complete all as specified and as directed.

S&F in repairs 150mm long Extruded aluminium handles, fabricated type, anodised complete all as specified and as directed.

S&F in repairs 125mm long Extruded aluminium handles, fabricated type, anodised complete all as specified and as directed.

S&F 200 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and as directed.

S&F 150 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and as directed.

S&F 100 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and as directed.

S&F in repairs 200mm aluminium, anodized, barrel tower bolts of extruded section complete all as specified and as directed.

S&F in repairs 150mm aluminium, anodized, barrel tower bolts of extruded section complete all as specified and as directed.

S&F in repairs 100mm aluminium, anodized, barrel tower bolts of extruded section complete all as specified and as directed.

S&F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy complete all as specified and as directed.

S&F in repairs aluminium alloy, anodized, 300 mm long sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed.

S&F in repairs mild steel peg stays, 300mm long , suitable for steel windows fixed with necessary nut, bolt and washers, complete all as specified and as directed.

S&F in repairs mild steel 300mm, ordinary rat rail rod pattern springs including roller and roller plate complete all as specified and directed.

S&F in repairs 100mm size brass mortice lock, vertical type, 4 levers, incl plates and two keys, incl cutting holes into existing pressed steel frames, complete all as specified and directed.

S&F in repairs 125mm aluminium anodised Hasp and staple, safety type fixed with screws complete all as specified and as directed

S&F in repairs 20 mm curtain rods of aluminium annodised powder coated fixed in existing brackets complete all as specified and as directed.

S&F in repairs curtain rods brackets aluminium annodised powder coated fixed complete all as specified and as directed.

S&F in repairs brass chromium plated tubular towel rail, 20 mm dia, D type, 60 cm between flanges complete all as specified and directed.

S&F in repairs Cast iron body door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 36 to 60 kg complete all as specified and as directed.

S&F in repairs floor door stopper aluminum alloy and touge, anodised over all length of cover plate 140mm, with hard drawn steel spring complete all as specified and directed.

S&F Framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors , ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed.

S&F for Pressed steel frames for doors with one or more rebates of size 125x60 mm including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and as directed.

S&F in repairs Steel windows/ventilators with side hung shutters incl box type hinges, with steel handle and steel peg stay, complete with glazing bars, devetailed or welded incl painting with one shop coat of zinc chromate primer all as specified and directed.

All as per item No 56.00 here in before but without glazing bars complete all as specified and as directed.

Taking down existing steel window/ventilator shutters area not exc 1 sqm each and carrying out necessary servicing incl mild steel box type hinges, mild steel handles, nuts, bolts washers and welding/greasing/oiling etc for smooth functioning and taking down unserviceable hardwares and refixing with new hardwares and re fixing the window shutters in position complete all as specified and directed. Note : Windows shall be fixed upto 6 storeys of buildings

Taking down existing aluminium door shutters area not exc 1.5 sqm each and carrying out necessary servicing incl greasing/oiling etc, for smooth functioning and taking down unserviceable hardwares and replacing with new hardwares and re-fixing the door shutters in position complete all as specified and as directed. Notes :- Hardwares wherever required to be replaced shall be measured and paid seperately at supply only rates under respective items of this schedule.

M&L for Cementious Grouting where heavy leakage (5 Nozzles per Sqm) Thoroughly clean the surface of slab with wire brush and Fill the slab area to check the water tightness of the RCC slab / sunken slab prior to waterproofing treatment. Mark the leaking points and treat them to make the leaking spots watertight using injection cement grout mixed with MasterFlow 150 or low viscous epoxy grout using Master Inject 1315 by drilling the hole and fixing the nozzles using Master Emaco S 348 or equivalent (BASF/Fosrock/ Sunanda/ kerakoll/ Mapei) complete as directed by the Engineer-in-Charge. Note: Rate quoted shall be inclusive of cement rate.

Providing water proofing treatment with best quality acrylic polymer modified cementitious composite slurry coating approved brand over sunken floors & terraces as given below:- a )The surface to be treated shall be clean from all debris and loose particles. All debonded particles shall be removed with wire brush and the surface should be clean and in SSD (Saturated surface dry) condition prior to the application of Make:SIKA/DR FIXIT/ASIAN SMARTCARE/FOSROC b) Providing water proofing treatment with , acrylic polymer modified cementitious composite slurry coating of approved brand at recommended rate as per manufacture @ 2mm in 2 coats over the sunken slab as per technical specifications and as directed by Engineer-In- Charge. Make:SIKA/DR FIXIT/ASIAN SMARTCARE/FOSROC

M&L for cleaning the joints of tiles in bathroom/Toilet/Kitchen flooring by removing wire brush or any other means/material and make suitable for applying chemicals for joints.The joints to be filled with Nitotile EP Grout-Fosroc and top coat to be filled with white or colour cement match to tile surface complete all as specified and as directed. Note: Rate quoted shall be inclusive of cement rate.

S&F in repairs 9mm thick prelaminated particle board interior grade prelaminated on one side with decorative choice lamination and with balancing white on the other side, fixed to aluminium frame work as in panel, etc complete all as specified and directed. Note : Clips wherever required shall be measured and paid seperately under respective items of this schedule.

S&F in repairs 19mm thick Prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work including beading complete all as specified and directed.

M&L for 25 mm thick Cement concrete type B0 1:2:4 using 12.5 mm graded stone aggregate as in levelling concrete finished even and fair to recive floor finshes, complete all as specified and as directed.

M&L for grainite tiles in flooring /Kitchen platform (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and as directed.

M&L Plain Cement Concrete Type C2, 1:3:6 (using 40 mm graded granite stone aggregate) in plinth protections and similar works inculding necessary form works complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) complete all as specified and as directed. Note: All debris and rubbish shall be removed from MOD land during or at the end of each working period at his risk and cost.

M&L for Non -skid ceramic coloured tiles 7 to 8 mm thick (square /rectagular) area of each tile exc 0.06 sqm but not exc 0.11 sqm in floors set jointed in neat cement slurry and pointed in white or coloured cement to match incl 15 mm thick screed bed in cement mortar 1:6,complete all as specified and directed.

M&L for Non skid ceramic colour tiles 7 to 8 mm thick (square/rectangular) area of each tile exc 0.11 sqm but n exc 0.18 sqm , in floors etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match including 20mm thick screed bed in cement mortar 1:6, complete all as specified and as directed.

M&L for Non skid ceramic colour tiles 7 to 8 mm thick (square/rectangular) area of each tile exc 0.18 sqm but not exc 0.36 sqm , in floors etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match including 20mm thick screed bed in cement mortar 1:6, complete all as specified and as directed.

Taking down cement plaster on brick or concrete or stone walls including racking out joints, hacking for key, scrubbing down with water etc including necessary scaffolding up to 6th storey complete all as specified and as directed. Note: All debris and rubbish shall be removed from MOD land during or at the end of each working period at his risk and cost.

M&L for Rendering 15 mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement including necessary scaffolding up to 6th storey complete all as specified and as directed.

M&L for Rendering 15 mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement etc including necessary scaffolding up to 6th storey complete all as specified and as directed.

M&L Rendering 10 mm thick in cement mortar 1:3 on ceiling of brick or concrete surfaces, finished even and smooth without using extra cement including necessary scaffolding up to 6th storey complete all as specified and as directed.

M&L Rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:3 mixed with waterproofing treatment with using integral waterproofing Fosroc Conplast X421IC conforming to IS:2645 as per manufacturers instruction complete all as specified and as directed. Note : WPC shall be measured and paid seperately.

M&L for Preparing new plastered suface of walls and applying two coats distemper oil emulsion, white or tinted over a coat of primer through mechanical means including necessary scaffolding up to 6th storey complete all as specified and as directed.

M&L Preparing new plastered surface of walls and applying three coats of white wash complete all as specified and as directed

M&L Preparing newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and as directed.

M&L Preparing new plastered surfaces of wall and applying two coats of cement base paint complete all as specified and as directed.

M&L Preparing new plastered surface of walls and applying two coats of cement base paint over a coat of primer through mechanical means including necessary scaffolding up to 6th storey complete all as specified and as directed

S&F 4.00 mm thick sheet glass ordinary quality and glazing with oil putty square not exc 0.5 sqm in each pane complete all as specified and as directed.

S&F 4.00 mm thick figured glass, pin type , glazing with oil putty in square in each pane complete all as specified and as directed.

Hacking out old broken glass (any thickness , size ,quality or description), from wooden frame glazed putty or fixed with beads complete all as specified and as directed.

S&F in repairs 5.5 mm thick sheet glass, ordinary quality, fixed with necessary glazing clips, in squares exceeding 0.5 Sqm in each pane complete all as specified and as directed.

S&F in repairs 4 mm thick frosted glass panes, fixed with necessary glazing clips, in squares exceeding 0.5 Sqm in each pane complete all as specified and as directed.

S&F in repairs 5 mm thick tinted glass panes, fixied with necessary glazing clips, in squares exceeding 0.5 Sqm in each pane complete all as specified and as directed.

S&F in repairs sliding locks suitable for sliding window shutters complete all as specified and as directed.

Supply only rubber beading suitable for fixing glass panes to aluminum door shutters complete all as specified and as directed.

Supply only neoprene beading suitable for fixing glass panes to aluminum door shutters complete all as specified and as directed.

M&L welding mild steel members of thickness not exc 6 mm as in repairs, welds n exc 2.5cm in length complete all as specified and as directed.

S&F in repairs stainless steel plate rack of size 990.60 mm x 914.40 mm including fixing to wall as directed etc complete all as specified and as directed

M&L Preparation of New or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint (Ordinary tint) over a coat of Pink primer complete all as specified and as directed.

M&L Preparation of new steel surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer complete all as specified and directed.

S&F 15 mm bore 'medium grade' galvanised, Mild steel water tubes, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S&F 20 mm bore 'medium grade' galvanised, Mild steel water tubes, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S&F 25 mm bore 'medium grade' galvanised, Mild steel water tubes, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

Taking up or down steel tubing and connections, fittings etc including cleaning for refixing or removal to store for 15mm bore complete all as specified and as directed. Note :- Quoted rate shall deemed to include cost of scaffolding or ladders etc required for approaching for repair work ( Ground floor to Seventh Floor).

Taking up or down steel tubing and connections, fittings etc including cleaning for refixing or removal to store for 20mm bore complete all as specified and as directed. Note :- Quoted rate shall deemed to include cost of scaffolding or ladders etc required for approaching for repair work ( Ground floor to Seventh Floor).

Taking up or down steel tubing and connections, fittings etc including cleaning for refixing or removal to store for 25mm bore complete all as specified and as directed. Note :- Quoted rate shall deemed to include cost of scaffolding or ladders etc required for approaching for repair work ( Ground floor to Seventh Floor).

Refixing 15 mm bore old steel tubing and connections in new or old position (wall, ceiling or floor) complete all as specified and directed.

Refixing 20 mm bore old steel tubing and connections in new or old position (wall, ceiling or floor) complete all as specified and directed.

Refixing 25 mm bore old steel tubing and connections in new or old position (wall, ceiling or floor) complete all as specified and directed.

Cutting existing 15mm bore steel tubing for addition or alteration (each cutting will be measured) complete all as specified and directed.

Cutting existing 20mm bore steel tubing for addition or alteration (each cutting will be measured) complete all as specified and directed.

Cutting existing 25mm bore steel tubing for addition or alteration(each cutting will be measured) complete all as specified and directed.

Supplying and laying of 20 mm outer dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling (surface/conclead) or laying in floors complete all as specified and directed. Note :- Quoted rate shall deemed to include cost of scaffolding or ladders etc required for approaching for repair work ( Ground floor to Seventh Floor).

Supplying and laying of 25mm outer dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling (surface/conclead) or laying in floors complete all as specified and directed. Note :- Quoted rate shall deemed to include cost of scaffolding or ladders etc required for approaching for repair work ( Ground floor to Seventh Floor).

S&F 500 ltrs capacity potential moulded polyethylene water storage tank (cylindrical or vertical) hoisted and fixed in position including dismantling existing water tank all as specified in SSR Part I complete all as specified and directed.

Ditto all as per item No 109.00 here in before but 1000 Ltrs capacity complete all as specified and as directed.

S&F in repairs 15 mm bore pillar taps, cast copper alloy, with capstan head, chromium plated, screwed down high pressure with long screwed shanks and flynuts screwed for iron pipes and fixed complete all as specified and directed.

S&F in repairs 15mm bore bib taps, cast copper alloy, chromium plated with crutch or butterfly handle screwed down, screwed for iron pipe or brass ferrule complete all as specified and as directed.

S&F in repairs 15mm bore long body bib taps, fancy type, cast copper alloy, Chromium plated with crutch or butterfly handle screwed down, screwed for iron pipe or brass ferrule all as specified and as directed.

S&F in repairs bib taps cast copper alloy CP fancy type with crutch or butterfly handle screwed down for iron pipe or brass ferrule of 15 mm bore complete all as specified and directed.

S&F in repairs 15 mm bore stop valves, cast copper alloys,Chromium plated, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.

S&F in repairs 15mm bore stop valves brass fancy type chromium plated, screwed down, high pressure with crutch or butterfly handles screwed both ends for iron pipes complete all as specified and directed.

S&F in repairs 15mm bore stop valves brass (Concealed type) fancy type chromium plated with long shank and cup , screwed down, high pressure with crutch or butterfly handles screwed both ends for iron pipes complete all as specified and directed..

S&F in repairs 25mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed. Note :- Quoted rate shall deemed to include cost of scaffolding or ladders etc required for approaching for repair work ( Ground floor to Seventh Floor).

S&F in repairs 20mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed. Note :- Quoted rate shall deemed to include cost of scaffolding or ladders etc required for approaching for repair work ( Ground floor to Seventh Floor).

S&F in repairs 25mm bore ball brass valve high pressure with polyethylene float and fly nut complete screwed for iron pipe or brass ferrule and fixed complete all as specified and as directed.

S&F in repairs waste fittings, brass chromium plated for glazed ware sinks and basin etc with long screwed shanks and flynuts flanged and bedded in red lead cement and other ends fixed for the following sizes:-

32mm bore

40mm bore

S&F in repairs 15mm dia Bib tap standard of PTMT any colour high pressure screwed down for iron pipe(Min weight 15mm-90gms) ISI marked all as specified and fixed complete all as specified and directed.

S&F in repairs 15mm dia Stop valve standard of PTMT any colour high pressure screwed down for iron pipe(Min weight 15mm-90gms) ISI marked complete all as specified and directed.

S&F in repairs brass NRV 15mm (Horizontal) complete all as specified and directed.

S&F in repairs brass NRV 15mm (vertical) complete all as specified and directed.

S&F in repairs wall mixer hot and cold mixing valve any type for 15mm bore pipe foam flow type complete all as specified and directed.

Repairs to tap any type including changing of spindal/ rubber washer etc if required (spindle shall be measure separately and paid at supply rate only) for the following sizes:-

Pillar taps

Supply only spindle brass suitable for the following sizes:-

Bib taps

Pillar taps

Stop cock

Concealed stop cock

S&F in repairs 20 mm GI nipple threaded 100 mm long complete all as specified and as directed.

S&F in repairs 25 mm GI nipple threaded 100 mm long complete all as specified and as directed.

S&F in repairs GI union threaded for 20 mm GI Pipe complete all as specified and as directed.

S&F in repairs GI union threaded for 25 mm GI Pipe complete all as specified and as directed.

S&F in repairs GI reducer 25/20mm threaded GI Pipe complete all as specified and as directed.

S&F in repairs 20 mm GI tank nipple threaded complete all as specified and as directed.

S&F in repairs 25 mm GI tank nipple threaded complete all as specified and as directed.

S&F in repairs 150mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to wall including dismantling of old pipe (sewage/rain water/any type) complete all as specified and as directed . Notes for Sl no 143.00 t0 160.00 :- Quoted rate shall deemed to include cost of scaffolding or ladders etc required for approaching for repair work ( Ground floor to Seventh Floor).

S&F in repairs 110mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to wall including dismantling of old pipe (sewage/rain water/any type) complete all as specified and as directed.

S&F in repairs 75mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to wall including dismantling old pipe (sewage/rain water/any type) complete all as specified and as directed.

S&F in repairs 110mm bore PVC (SWR) vent cowl all as specified and directed. Note :- Quoted rate shall deemed to include cost of scaffolding or ladders etc required for approaching ( Ground floor to Seventh Floor).

S & F in repairs 110mm bore PVC (SWR) bends of any radious all as specified and directed. Note :- Quoted rate shall deemed to include cost of scaffolding or ladders etc required for approaching ( Ground floor to Seventh Floor).

S & F in repairs 110mm bore PVC (SWR) bends with access door of any radious all as specified and directed. Note :- Quoted rate shall deemed to include cost of scaffolding or ladders etc required for approaching ( Ground floor to Seventh Floor).

S & F in repairs PVC (SWR) double branch piece (double Y), with access door 110 mm bore all as specified and as directed.. Note :- Quoted rate shall deemed to include cost of scaffolding or ladders etc required for approaching.

S & F in repairs PVC (SWR) Branch piece single equal or unequal with access door 110mm bore all as specified and as directed. Note :- Quoted rate shall deemed to include cost of scaffolding or ladders etc required for approaching.

S & F in repairs PVC (SWR) junction single (Single T) equal or unequal with access door 110mm bore all as specified and as directed. Note :- Quoted rate shall deemed to include cost of scaffolding or ladders etc required for approaching.

S&F in repairs for PVC (SWR) gully trap 125/110mm, setting and jointing with solvent cement complete all as specified and as directed.

S&F in repairs 75mm bore PVC (SWR) vent cowl all as specified and directed. Note :- Quoted rate shall deemed to include cost of scaffolding or ladders etc required for approaching ( Ground floor to Seventh Floor).

S & F in repairs 75mm bore PVC (SWR) bends of any radious all as specified and directed. Note :- Quoted rate shall deemed to include cost of scaffolding or ladders etc required for approaching ( Ground floor to Seventh Floor).

S & F in repairs 75mm dia PVC (SWR) bend with access door of any radious all as specified. Note :- Quoted rate shall deemed to include cost of scaffolding or ladders etc required for approaching ( Ground floor to Seventh Floor).

S & F in repairs PVC (SWR) double branch piece (double Y), with access door 75 mm bore all as specified and as directed. Note :- Quoted rate shall deemed to include cost of scaffolding or ladders etc required for approaching.

S & F in repairs PVC (SWR) Branch piece single equal or unequal with access door 75mm bore all as specified and as directed. Note :- Quoted rate shall deemed to include cost of scaffolding or ladders etc required for approaching.

S & F in repairs PVC (SWR) junction single (Single T) equal or unequal with access door 75mm bore all as specified and as directed. Note :- Quoted rate shall deemed to include cost of scaffolding or ladders etc required for approaching.

S&F in repairs 75 mm bore PVC(SWR) floor trap, plain with grating including jointing with solvent cement all as specified and as directed. Note :- Quoted rate shall deemed to include cost of scaffolding or ladders etc required for approaching.

S & F in repairs for 75mm dia PVC (SWR) multi floor trap with grating including jointing with solvent cement all as specified. Note :- Quoted rate shall deemed to include cost of scaffolding or ladders etc required for approaching.

S&F in repairs Vitreous China Ware Wash hand basin white, flat back, size 630 x 450 mm size including cutting for and pinning ends of brackets or erecting stand complete all as specified and directed.

S&F in repairs vitreous China wash basin, white flat back, size 550x400mm including cutting for and pinning in ends of brackets or ereesing stand complete all as specified and directed.

S&F in repairs wash hand basin vitreous china white flat back of size 550x400mm including brass chromium plated pillar tap 15mm size, cast copper alloy with capstan head, brass chromium plated waste fittings, PVC waste pipe of suitable size, PVC connection 450 mm, plug and porcelin stopper, CI brackets, cutting for and pinning in ends of brackets or erecting stand including taking down the old one complete all as specified and directed.

Taking down existing vitreous china wash hand basins of any description and size along with brackets and Refixing the same wash basin in new or old position with and including new rag bolts of suitable size and making good the disturbed surfaces to match with the adjacent surfaces complete all as specified and directed.

S&F in repairs 32mm dia. PVC plain waste pipe for WHB 60cm long with union complete all as specified and directed.

S&F in repairs Vitreous China wash down water closet pan (Pedestal Pattern), White with 'P' or 'S' trap, including provision of fixing bolts and connecting upto drain and flushing pipe including EWC seat cover etc complete all as specified and directed.

S&F in repairs Vitreous China wash down water closet pan (Pedestal Pattern), EWC White with 'P' or 'S' trap, including provision of fixing bolts and connecting upto drain and flushing pipe etc complete all as specified and directed.

S&F in repairs vitreous china squatt pattern, Orissa Pattern size 580x440mm White,with integral Foot rests and 'P' or 'S' trap, white, including provision of fixing bolts and connecting upto drain and flushing pipe etc complete all as specified and directed.

S&F in repairs 110mm PVC (SWR) traps 'P' or 'S' complete all as specified and directed.

S&F in repairs plastic water closet seat cover, white, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device for (Pedestal Pattern) complete all as specified and directed.

S&F in repairs plastic water closet seat cover, white, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device suitable as well as for anglo indian WC complete all as specified and directed.

S&F in repairs PVC Flushing Cistern 10 Ltrs Capacity Syphonic action type with Flush pipe low level, with inlet ball valve, Float chain& pull & brackets, including making necessary connections to water supply pipe line and jointing to WC etc complete all as specified and directed.

S&F in repairs PVC float valve for use in PVC flushing cistern suitable for 20 mm bore inlet complete all as specified and directed.

S&F in repairs syphon set for PVC flushing cistern complete all as specified and directed.

S&F in repairs PVC/plastic handle for flushing cistern complete all as specified and directed.

S&F in repairs sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F in repairs waste coupling for stainless steel sink 75mm size,complete all as specified and directed.

S&F in repairs waste coupling for stainless steel sink 100mm size, complete all as specified and directed.

S&F in repairs PVC flexible pipe (wastepipe) suitable for 40 mm waste coupling complete all as specified and directed.

S&F in repairs brass chromium plated shower rose including arm with or without swivel joints 75mm size including fixing to steel pipe or union 15 mm bore including taking out the old complete all as specified and directed.

S&F in repairs 15mm bore PVC connection 45 cm long between ends with PTMT nut and washer complete all as specified and directed.

S&F in repairs CP health faucet, brass chromium plated with wall hook and 1.00 m long flexible pipes complete all as specified and directed.

S&F in repair bathroom cabinet Mirror of moulded PVC of size 431.80mm x 355.60mm including fixing to wall complete all as specified and directed.

S&F in repairs stainless steel toilet paper holder of approved make complete all as specified and directed.

S&F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.

S&F in repairs Towel Ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms) complete all as specified and directed. specified and directed.

S&F in repairs Stainless steel grating 125mm dia complete all as specified and directed.

Removing plants/herbs grown on walls/junctions with roots using herbicide chemical,rendering and making good of existing brick/ concrete surfaces up to 6th storey complete all as specified and directed.

Demolition of brick work/stone boulder masonry , built in cement mortar incl all quoins, arches pillars etc but excluding ashlar facings etc complete all as specified and directed.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and directed. Note: All debris and rubbish shall be removed from MOD land during or at the end of each working period at his risk and cost.

Demolition of cement concrete (un-reinforced) in ground floor and paving not exc 15 cm thick above or below ground level complete all as specified and as directed. Note: All debris and rubbish shall be removed from MOD land during or at the end of each working period at his risk and cost.

Demolition of plain cement concrete of any description and in any position complete all as specified and directed. Note: All debris and rubbish shall be removed from MOD land during or at the end of each working period at his risk and cost.