WELCOME MAINTENANCE TO OFFRS MD ACCN, JCOS/ORS MD ACCN AREA UNDER AGE B/R-I AT CHANDIPUR AND REPAIR TO CEILING FAN, EXHAUST FAN, WALL MOUNTED FAN PADESTAL FAN GEYSER PARTAIN TO PXE OTM AND MD ACCN UNDER AGE E/M CHANDIPUR

M & L for preparation of old decorated surfaces of walls plastered or unplastered incl removing cornices, pilasters by brooming down to remove all dust, dirt and all loose scales and other foreign matter and smoke soot, moulds, moss and efflorescent salt, oil & grease spots by steel wire brushes or steel scrapers, etc and applying one coat of white wash to walls to obtain uniform surface including making good the surface complete all as specified and directed.

- ditto - all as per item No. 1 above but on ceilings complete all as specified and directed.

- ditto - all as per item No. 1 above but one coat of distemper oil emulsion on walls complete all as specified and directed.

- ditto - all as per item No. 1 above but one coat of distemper oil emulsion on ceiling complete all as specified and directed.

M & L for preparation of old decorated plastered / unplastered surfaces of walls and applying two coats of distemper oil emulsion completet all as specified.

M & L for complete removal of existing treatment of walls plastered or unplastered, Washing, rubbing down and stopping of distempered and painted surfaces and applying two coats of acrylic interior emulsion paint over a coat of alkali resistant primer including 1mm thick wall care putty and making good the surface complete all as specified and directed.

Preparation of old surfaces of wood and wood based surfaces and applying one coat of synthetic enamel paint of any description not otherwise described over 10 cm width or girth complete all as specified and directed.

Preparation of old painted surfaces of steel and applying one coat of synthetic enamel paint to steel surfaces of any description not otherwise described over 10 cm width or girth complete all as specified and directed.

Taking down cement plaster any description and the like on brick or stone walls, etc including raking out joints,hacking for key, scrubbing down with water etc. complete all as specified and directed.

M & L for 10 mm thick in CM 1:6 rendering on brick or concrete surfaces finished even and smooth without using extra cement on wall complete all as specified and directed.

M & L for 5mm thick in CM 1:3 rendering on ceiling surfaces finished even and smooth without using extra cement complete all as specified and directed.

M & L for preperation of newly plastered surfaces of ceilings and applying three coats of white wash complete all as specified and directed.

M & L for prepartion of newly plastered surfaces and priming plastered surfaces with alkali resistant primer and applying two coats of oil bound distemper on walls complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises.

M & L for 15 mm thick screed bed or bedding layer of mortar in CM 1:6 for laying floor finishes complete all as specified and directed.

M & L for 10 mm thick rendering in CM 1:4 on brick or concrete surfaces as in backing coat to receive tile finish as in skirting and dados complete.

M & L for Vitrified Ceramic tiles light shed 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

All as per Sl Item No 17 above but as in vertical surfaces such as skirtings, dado, etc.

M & L for joint free Non - skid Ceramic white tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles complete all as specified and directed.

All as per Sl Item No 19 above but as in vertical surfaces such as skirtings, dado, etc.

M & L joint free glazed ceramic coloured tiles as in vertical surfaces 450 mm x 300 mm x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tiles.

M & L for Non Skid coloured ceramic joint free tiles 7 to 8 mm thick area of each tile exceeding 0.06 sqm but not exc 0.11 sqm ( 300 x 300 mm ) in floors etc set & jointed in neat cement slurry and pointed in coloured cement complete all as specified and directed.

Taking down Chowkats or frames n.exc 1.50 sqm each with shutters (without taking off shutters and grill from the frames) complete all as specified and directed.

Taking down Chowkats or frames exc. 1.50 Sqm but n.exc 4.00 sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed.

Taking down shutter of any description but exc 1 sq. m and n exc 2 sq. m each complete all as specified and directed.

Supply and fix powder coated anodised aluminium frame for windows, ventilators with one or more rebates (minimum thickness of powder coating 50 micron) including joining cleat for fixing etc. complete all as specified and as directed.

Supply and fix powder coated anodised sliding/hung type aluminium door, window and ventilator shutters (minimum thickness of powder coating 50 micron), without sash, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150 mm long (1 No), hinges type B-21 100 mm long (2Nos) suitable handle (1 No), aluminium tower bolt 100 mm (1No) etc. complete all as specified and as directed.

S & F framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.

Providing and fixing factory made uPVG white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm) and Area not exceeding 2.00 sqm each. Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm),Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware.EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. (Note: The unit rate quoted by contractor excludes cost of glass, wire mesh and connected accessories. Net Opening will be measured for payment purpose.)

M & L for preparation of new steel surfaces over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S & F 5mm thick sheet glass, ordinary quality and glazing with rubber beading around the glass, in squares exc 0.50 sqm in each pane complete all as specified and as directed.

S & F stainless steel wire cloth, 0.36 mm nominal dia of wire and avergae width of aperture 1.40 mm and fixed with stainless steel wire staples, etc. complete all as specified and as directed.

M&L for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 65x100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms)fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant 152 SECTION 8 and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (Rate includes M.S. hold fast/ lugs or SS dash fasteners ). Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

-Ditto- as item No. 33.00 above but of Frame size 65x 125 mm

M&L for Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge),minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges shall be paid separately)

All as per Item no.35 above but Factory made WPC wire gauzed door shutter 30 mm thick(style). (Note: The unit rate quoted by contractor excludes cost of glass, wire mesh and connected accessories.)

S & F of solid PVC door frame of size 50mmx47mm made out of 5mm single side prelam PVC sheet & edges will be painted to match with prelam sheet reinforced with MS square tube, suppling and fixing in opening complete.

S & F of factory made solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of M.S tubes for top and bottom rails. M.S frame shall be covered with heat moulded plain colour PVC 'C' channel moulded both side Prelam PVC sheet strip of 20mm width stuck inside with solvent cement for stiles prelam PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail; Panelling of both sidePrelam PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement.

S & F Stainless steel medium weight, cold rolled mild steel of size 75 mm complete all as specified and directed.

S & F for SS butt hinges medium weight cold rolled mild steel of 100 mm size. complete all as specified and directed . (for wooden doors)

S & F for 150 mm extruded Aluminium aloy handles, febricated type anodised complete all as specified and directed .

S & F for 150 mm size aluminium anodised barrel tower bolt of extruded section complete all as specified and directed .

S & F for 300 mm Sliding door bolt aluminium alloy, anodised, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S & F in repairs stainless steel wire cloth, 0.36 mm nominal dia of wire and avergae width of aperture 1.40 mm and fixed with stainless steel wire staples, etc. complete all as specified and as directed.

Taking down and refixing shutter after repair of any description exc 1 Sqm but n. exc 2 Sqm each in same opening complete all as specified and as directed.

Taking down and refixing of door frames and Shutters with Resecuring, easing, adjusting and refixing in same opening of any description with shutters area exceeding 1.5 Sqm but n exc 4 sqm each all as specified and as directed and making good the disturbed plastered surfaces with 10 mm plaster in CM 1:6 and final finish as per existing.

Taking down shutters and refixing Resecuring, easing, adjusting and refixing of any description exc 1 Sqm but n exc 2 Sqm each complete all as specifed and directed.

.-Ditto-all as per item No 47 above but area n.exc 1 Sqm complete.

S & F in repairs for butt hinges medium weight cold rolled mild steel of 100 mm size. complete all as specified and directed .

S & F in repairs for butt hinges medium weight cold rolled mild steel of 75 mm size. complete all as specified and directed .

S & F in repairs for 150 mm extruded Aluminium aloy handles, febricated type anodised complete all as specified and directed .

S & F in repairs for 100 mm extruded Aluminium aloy handles, febricated type anodised complete all as specified and directed .

S & F in repairs for 150 mm size aluminium anodised barrel tower bolt of extruded section complete all as specified and directed .

S & F in repairs for 100 mm size aluminium anodised barrel tower bolt of extruded section complete all as specified and directed .

S & F in repairs for 300 mm Sliding door bolt aluminium alloy, anodised, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S & F in repairs Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, overall length 150 mm fixed in floor complete all as specified and as directed .

S & F in repairs for 300 mm, ordinary rat tail rod pattern Helical door springs including roller and roller plate complete all as specified and directed.

S&F in repair 100 mm size mortice lock with two lever (vertical type) brass body and fixed complete all as specified.

S&F in repairs using plywood, grade BWP, type BB 18mm thick fixed with screws to timber framework and similar works etc. complete all as specified.

M&L Decorative type sun mica 0.9mm/1mm thickness type 1,of surface finish,colour and pattern as approved, fixed with approved adhesive as per manufactures instructions.

M & L 100mm Extruded brass handles, fabricated type polished

S & F 75mm Butt hinges, extruded brass, with mild steel hinge pin, bright polished and fixed.

M & L for preparation of new or previously untreated/old surface of wood of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamelled paint over one coat of pink primer complete all as specified and directed

S&F in repair 100mm long Hasp and Staple, Safety type, aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws.

S & F in repair stainless steel fancy type curtain rod of outer dia 20 mm with bracket and all accessories (Note : Necessary Bracket including in this items in every curtain rod to be fitted)

S & F in repair CP Brass mixer with hand shower of 15 mm dia for mixing hot & cold water screwed down for iron pipe complete.

S&F in repairs Stop/concealed stop/angle valves , chromium plated, cast copper alloy, screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed to 15 mm bore pipe complete.

S&F in repairs Bib taps, chromium plated, cast copper alloy screwed down, screwed for iron pipe or for brass ferrule and fixed to 15 mm bore pipe complete.

S&F in repairs Pillar tap(long body type) cast copper alloy, with capstan heads, chromium plated, screwed down, high pressure with or without letter 'HOT' or 'COLD' with long screwed shanks and fly nuts, screwed for fixing to 15 mm bore pipe complete.

S&F in repairs Bib tap standard of PTMT any colour high pressure screwed for 15 mm bore dia iron pipe and fixed (Minimum weight 15mm-90gms/20mm-125gms) complete.

S&F in repair Pillar taps of PTMT any colour high pressure screwed for iron pipe and fixed.(Minimum weight15mm-110gms)

S&F in repair Angle/ stop valve of PTMT any colour high pressure screwed for iron pipe and fixed, (Minimum weight 15mm-90gms)

S & F in repairs Vitreous china wash down water closet pan (pedestal pattern) including 'P' or 'S' Trap with necessary, fixing arrangement including plastic water closet seat cover white with recessed bottom and cover fixed with aluminium hinging device complete all as specified and directed.

.M & L in repair for PVC valve less syphonic action type flushing cistern 10 ltr capacity low level white with inlet ball valve, float flush pipe and handle including bracket ( Prayag/Hindware/Parryware) fixed.

Supply and fix in repair PVC connection 15mm size with PTMT nuts of length 600mm

S & F in repair Vitreous china wash basin with pedestal, white, flat back, size 550 x 400 mm excluding taps, waste pipe, chain and plug and porcelain stopper but including cutting for and pinning in ends of brackets complete all as specified and directed.

S & F in repairs stainless steel sink, 1.00 mm thick for kitchen with plug, waste pipe, washer including cantilever cast iron bracket, connecting union overall size 915 mm x 460 mm with bowl size 410 mm x 330 mm x 160 mm.

Dismantling of stone slab and tiles laid bedded and pointed in any mortar of any description or thickness in floors, approons etc

M & L granite slab (of any type) 20 (+/-2)mm thick machine cut bedded and jointed with greay cement slurry and pointed with white cement with admixture of pigments to match the shade of granite stone including cutting and polishing complete as in cooking platform etc.,

S&F glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard railing 60 cm long in repairs.

S&F in repair shower rose chromium plated 120 mm (minimum) size with swivel joints suitable for 15 mm bore pipe including shower arm chromium plated 15 mm dia, 190 mm (minimum) long with bend of 45 degree complete all as specified and directed.

S&F Plastic water closet seat cover soft closed white with bottom and cover fixed with aluminium hinging device in repair.

S & F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.

Dismantling water tanks of any type of capacity exc 250 but n.exc 500 liters and removing to store complete all as specified and directed.

S & F Rotational moulded polyethylene water storage tanks of 500 ltrs capacity (cylin-drical vertical with closed top) hoisted and fixed in position complete all as specified in SSR Part I .

Dismantling water tanks of any type of capacity exc 500 liters but n. exc 1000 ltrs and removing to store complete all as specified and directed.

S & F Rotational moulded polyethylene water storage tanks of 1000 ltrs capacity (cylin-drical vertical with closed top) hoisted and fixed in position complete all as specified in SSR Part I .

Disconnecting existing 500 Ltr tanks and from mouths of circulating pipes, etc cleaning & removing all scale & dirt etc from existing tanks and mouths of circulating pipes of any description & washing down in the manner as specified and re-fixing in position complete all as specified and directed.

All as per Item above but 1000 Ltr tanks, complete all as specified and directed.

S & F in repair of Ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed to 20 mm bore pipe complete all as specified and directed.

Taking up or down steel tubing 15 mm bore and connections, including cleaning for re-fixing or removal to store complete all as specified and directed.

Taking up or down steel tubing 20mm bore and connections, including cleaning for re-fixing or removal to store complete all as specified and directed.

S&F 15mm dia UPVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe with all fittings complete all as specified and as directed by Engr-in-charge.

- ditto - all as per item 94 above but 20mm dia UPVC pipes complete all as specified and as directed by Engr-in-charge.

- ditto - all as per item 94 above but 25mm dia UPVC pipes complete all as specified and as directed by Engr-in-charge.

S & F for 110 mm PVC (SWR) pipes single socketed in any length with rubber ring joints, necessary clamps fixed to walls including taking down complete all as specified and directed.

S & F for PVC (SWR) 110 mm bends complete all as specified and directed.

S & F in repair 75 mm dia PVC (SWR & RWP) floor trap plain with grating inclu. jointing with solvent cement of out let dia. (SUPRME/PRINCE/ ORIPLAST)

S & F 75 mm dia PVC (SWR & RWP) pipes single socketed in any length with rubber ring joints fixed to wall including taking down complete all as specified and directed. (SUPRME/PRINCE/ ORIPLAST)

S & F for PVC (SWR) 75 mm bends complete all as specified and directed.

S & F in repair CP brass basin mixer of 15 mm dia for mixing hot & cold water screwed down for iron pipe and fixed complete.

M&L Taking down Ceiling fan, sealing cable end, dismantling blades and removing fan and blades to store for repair complete all as specified and directed. Note : Accessories shall be measured and paid separately.

M&L Rewinding the motor of AC ceiling fan of any make and size (1200/1400mm) with super enamelled copper wire of adequate size/gauge including all insulation materials, varnishing etc complete all as directed by Engineer-in-Charge.

All as per item No.104 here-in-before but for exhaust fans of 300/380mm sweep of any make.

All as per item No.104 here-in-before but for wall mounted/ padestal 450/600mm sweep of any make.

Supply only Ball bearing of suitable size for any type/make of ceiling fan,Exhaust Fan wall mounted fan

Supply only capacitor 220 volts, 2.5/3.15 mfd suitable for ceiling fan.

Supply only capacitor 220 volts, 4.0 mfd suitable for ceiling fan.

Supply only gun metal bush suitable for any type of ceiling fan complete all as specfied and as directed.

M&L for Painting of ceiling fan/ Exhaust Fan in installed position with one or more coats of spray painting with synthetic enamel paint of approved brand and manufacture to give an even shade, including cleaning of surface with detergent etc. as required. Note : Colour of paint is as per site requirement.

S&F in repairs canopy complete all as specified and as directed.

M&L for Hanging only ceiling fan and connecting up including provision of cable from ceiling rose or connector to fan Complete all as specified and directed

Fixing only exhaust /wall mounted fanand connecting up including provision of cable from ceiling rose/connector to fan Complete all as specified and directed

M&L for only servicing of ceiling fan after greasing, checking and replacement of unserviceable elements like split pin/mild steel clamp/screw, nut, bolt washer for blade/fan hook/rubber insulator/canopy complete all as specified and as directed. Note : Accessories shall be measured and paid separately but split pin, nut bolt, rubber grip and screw/washer,for fixing the blade including in the quated rate.

Taking down geysers of 25/50 litres capacity and refixing the same in position, reconnection of existing inlet/outlet pipe lines and power connection after necessay repair by takingout defective parts/ components for replacement with new one including testing complete all as specified and as directed. Note : New parts/components shall be measured and paid separately under relevant items.

M&L for repair to 50 Ltrs capacity geyser inner shells made out of copper/steel with brazing soldering welding including outer shell/ body repair & reassembling the same complete all as specified and as directed.

M&L for repair to 25 Ltrs capacity geyser inner shells made out of copper/steel with brazing soldering welding & including outer shell/ body repair reassembling the same complete all as specified and as directed.

S&F in repairs heating element, 1.5/2KW capapcity, of existing type for geyser complete all as specified and as directed.

S&F in repairs thermostat, bi-metallic strip type of working range 32 degree to 90 degree celcius as per existing at the site complete all as specified and as directed.

S&F in repairs pressure release valve suitable for outlet pipe 15mm bore complete all as specified and as directed.

S&F in repairs apparatus plate suitable for 25/ 50 ltrs capacity geyser complete all as specified and as directed.

S&F in repairs plug top 15 Amps, 3 pin as per existing complete all as specified and as directed.

S&F in repairs inlet and outlet connection pipe reiforced with 304 grade stainless steel (Pack of 2 Nos and each 650 mm long) with check nut and washer suitable for existing geyser of capacity 25/50 litr complete all as specified and as directed.

Supply only in replacement of existing damage motor of ceiling fan due to bend or wear tear in shaft , damage of armeture laminated sheet or seized of bearing with new cu wounded motor complete set including body hanging rod nut bolt bush etc suitable for 1200 mm ceiling fan with necessery one year warranty in all respect rod complete all as specified and directed.

Supply only in replacement of existing damage ceiling fan blade due to bend , wear and tear with new one 1200 mm long set of three white in colour complete all as specified and directed.

Please Enable Macros to View BoQ information