REPAIR TO CHAJJA , FACIA, LEAKAGE, SEEPAGE AND MISC B/R WORK TO OTM AND MD ACCN IN ZONE-II UNDER AGE B/R-III OF GE(SOUTH) MEERUT CANTT

Amount

Demolition of cement concrete (unreinforced) in ground floor and paving n.exc 15cm thick (below or above ground level) complete all as specified and directed.

Material and Labour for 50mm thick plain cement concrete 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in flooring, surfaces finished even and fair complete all as specified and directed.

Material and Labour for 75 mm thick PCC 1:3:6, type C-2 (using 40mm graded crushed stone aggregate) as in plinth protection, surfaces finished even and fair complete all as specified and directed.

Supply and fix joist, channel, angle or tee sections fixed independently, without connecting plates complete all as specified and directed.

Supply and fixing 2mm thick fiber glass reinforced translucent corrugated sheet with two corrugation side lap fixed with coach screw and washer in roof wall etc complete all as specified and directed.

Dismantling asbestos cement (corrugated or semi corrugated) sheets in chajja roof , wall including demolition of old chajja complete all as specified and directed.

Dismantling of timber scantlings 40 Sq cm or over in section in any position and in any situation complete all as specified and directed.

Material and labour fibre cement sheet 6mm thick corrugated or semi corrugated fixed in roofs with J or L hooks including bitumen washer complete all as specified & directed

Material and labour for fibre cement sheet 6mm thick two piece adjustable serrated ridge for corrugated or semi corrugated sheets fixed in roofs with J or L hooks complete all as specified & directed

Supply and fix pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed

Supply and fix pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Supply and fix structural steel work for in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S 1161-1979 gde St-240 complete all as specified and directed.

Supply and fix MS work as in framed work for roof trusses purlin rafter fastning distance pieces cleats etc (including fixing independently vertical post) complete all as specified and directed.

Preparation of new steel surface of any descripion over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed..

Dismantling structural steel work incl doors gates in any position all as directed by Engibneer-in-Charge

Material and labour for repair to overhang portion of chajja, facia, dropwall etc. for continuous work by providing PCC(1:2:4) type B-0 (using 12.5mm graded crushed stone aggregate) and finished with CM(1:3) by maintaining same thickness & level and finished the surface to match with the existing surface by providing same finish including taking down old chajja, facia, dropwall scrubbing down with water and removal of debris from site and disposing off out side the MD land . (Height of work is upto 4.00m from FFL of Ground Floor.) (Note : Wherever reinforcement is required the same shall be paid separately under relevant item)

Material and labour for repair to overhang portion of chajja, facia, dropwall, canopy, porch, parapet wall or similar location etc.for discontinuous work by providing PCC(1:2:4) Type B-0 (using 12.5mm graded crushed stone aggregate) and finished with CM(1:3) by maintaining same thickness and finished the surface to match with the existing surface by providing same finish including taking down old chajja facia, drapwall scrubbing down with water and removal of debries from site(Area exc. 0.1 Sqm but n. exc. 1 Sqm each.) (Note : Wherever reinforcement is required the same shall be paid separately under relevant item) all as specified and as directed by Engr-in-Charge.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) exceeding 1.50 Sqm and not exc 4.00 Sqm each complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exceeding 1.50 Sqm each complete all as specified and directed.

Taking down shutters of any description exc 1 Sqm but not exc 2 Sqm each complete all as specified and as directed by Engr-in-Charge.

All as per Item No. 20.00 above but area n.exc.1.0 Sqm each complete all as specified and directed.

Supply & fixing 30mm thick flush shutter solid core construction with particle board core and plywood face panels, commercial type on both sides complete all as specified and directed.

Supply and fix, 2nd class hard wood plain framed pannelled shutter (Two/three panels) rail and style of 2nd class hard wood 35mm thick, panel of 12mm veneered particle board width commercial veneered on both sides kiln seasoned and chemically pressure treated the size of rails and style as per IS 1003 (Part-I) complete all as specified and directed.

Supply and fix 2nd class hard wood glazed and skelton door shutter 35 mm thick open rebated and prepared to receive glass/gauze (without sash bars) divided into square with plain, chemfered or rounded, mitred and rebated sash bars the size of menbers of shutters as specified in SSR Part-I section 8 Clause 8.24 (a) complete all as specified and directed.

Supply & fix 100mm long aluminium alloy handles, fabricated type extruded section, ISI marked complete all as specified and directed

Supply & fix 150mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed

Supply & fix 250mm long aluminium alloy, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing and sliding bolts complete all as specified and directed

Supply & fix 100mm size aluminium anodized hasp and staple, safety type, with mild steel hinge pin including bolt to hinge plate fixed with screws all as specified and directed.

Supply & fix floor door stopper of aluminium alloy body and tongue, anodized with hard drawn steel spring, with overall length of cover plate 150mm long, fixed in floor complete all as specified and directed.

Supply & fix in repair continuous (Piano) hinge, mild steel bright finish or electro galvanized, width of flap (when open) 30mm complete all as specified and directed.

Material & labour for 18/19mm thick pre-laminated particle board, interior grade, pre-laminated one side with decorative choice lamination and other side balance with white colour lamination fixed with screws to timber frame work such as in kitchen/bath cabinets etc. including 1mm thick PVC lipping fixed in repair complete all as specified and directed.

Supply & fix steel ventilator with top/side hung shutter including hinges, steel peg stay including taking down old one complete all as specified and directed.

Supply & Fix in repair for steel window box type using ERW 'P' section comprising double frame for gauged and glazed skeleton shutter jointed internally through out all around with flat iron 40x3mm complete including hinges, handle tower bolts stops, lugs etc all as shown on drawing Note (i) For the purpose of measurement & payment double shutter with frame shall be considered as one unit (ii) Unit rate quoted against this item shall also include the iron mongeries shown on drgs (iii) Guard bars glazing & wire mesh shall be measured & paid for separately complete all as specified and directed .

Hacking out old broken glass (any thickness, size, quality or description) from wooden/steel frames, glazed with putty or fixed with beads complete all as specified and directed.

Material & labour for 3 mm thick sheet glass ordinary quality and glazing with oil putty / beads in square, area n.exc 0.5 Sqm in each pane complete all as specified and directed.

Supply & fixing galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of apertures 1.18mm and fixed with tinned tags or galvanised wire stapples complete all as specified and directed.

All as per Item No. 36.00 above but fixed in repairs.

Material & labour for solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube complete all as specified and directed.

Material & labour for factory made solid panel PVC wood grain printed door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side &as gap insert for top rail & bottom rail paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed togathers with solvent cement complete all as specified & directed.

Supply & fix butt hinges stainless steel 100mm with steel screws complete all as specified and directed.

Supply & fixing butt hings medium weight cold rolled mild steel 100mm long complete all as specified and directed.

Supply & fix in repair magnet catcher suitable for cupboard shutter complete all as specified and directed.

Taking down cement or cement lime plaster any description from brick or stone walls/ceiling etc including raking out joints, hacking for key & scrubbing down with water complete all as specified and directed.

Material and labour for rendering 15 mm thick in cement mortar 1:6 on fair faces of brick work or concrete surface of wall and finished surface even and smooth without using extra cement complete all as specified and directed.

Material and Labour for 5mm thick rendering on concrete surface as in ceiling in cement mortar 1:4, surfaces finished even and smooth without using extra cement complete all as specified and directed.

Material and labour for preparing of newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

Material and labour for preparation of new plastered surfaces of walls and applying three coat of white wash complete all as specified and directed.

Material & labour for complete removal of existing treatment of walls and applying wall care putty to make surface even and smooth complete all as specified and directed.

Material and labour for applying two coat of oil bound distemper complete all as specified and directed.

Material and labour for preparation of old surfaces of wall and applying one coat of oil bound distemper on old wall surface complete all as specified and directed

Material and labour for preparation of old plastered or unplastered surface of walls and applying one coat of white wash on wall complete all as specified and directed.

Material and labour for preparation of old plastered or unplastered surface of ceiling and applying one coat of white wash on ceiling complete all as specified and directed.

Material and labour for preparation of old plastered or unplastered surface of walls and applying one coat of cement base paint complete all as specified and directed.

Material & labour for preparation of new wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer on new wooden surfaces complete all as specified and directed.

Material and labour for preparing surfaces of wood and wood based material old painted surfaces of any description over 10cm width and girth and applying one coat of synthetic enamel paint complete all as specified and directed.

All as per Item Nob 55.00 above but on steel surface.

Dismantling, floor, hearth or wall tiling including cement mortar bedding but not backing and removing rubbish off the premises complete all as specified and directed.

Supply & fix non skid glazed ceramic tiles (any shade) of size 400mmx400mmx7 to 8 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match as in floor including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

Supply & fix light shade vitrified tiles coloured superior quality 600mm x 600mm x 8 to 10mm thick as on floor/skirting etc set and jointed with favimate/ball endura adhesive and joints grouted including 10mm thick screed in CM 1:4 and all as per manufacturer's instruction complete all as specified and directed.

All as per item No 59.00 above but in skirting / dado including 10 mm thick screed bed in CM 1:6 complete all as specified and directed.

Material & labour for coloured glazed ceramic tiles of approved shade of size 450mm x300 mm x 7 to 8 mm thick laid in dado etc set and jointed in white or coloured cement to match the existing surfaces laid over and including 10mm thick rendering in CM 1:4, complete all as specified and directed.

Material & labour for 20 to 22 mm thick designer tiles of 300mmx300mm size and approved pattern laid and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

Supply and fix in repair 25mm dia vista pattern curtain rod of approved finish of superior quality including fancy type knobs at both ends, bracket for supports and rings etc complete all as specified and directed.

Supply and fixing as in repair vitreous china wash down water closet pan (pedestal pattern), white fixed with 'P' or 'S' trap including making good the disturbed surfaces to match with existing surface complete all as specified and directed.

Supply and fix in repair white plastic seat cover for W.C (E.T) white including MS CP or aluminium hinging device complete all as specified and directed.

Supply & fix in repair PVC dual flushing cistern 10ltr capacity with double flush button Cat Part No. - C-002 Pearl/ CAT Part No B 1020101 Cera or equivalent in Hindware complete all as specified and directed

Supply & fix in repair chromium plated ABS jet spray health faucet including stainless steel tube of standard length fixed in WC seat complete all as specified and directed.

Supply and fix in repair PVC connection 600mm long with PTMT nuts suitable for 15mm bore pipe complete all as specified and directed.

Supply and fixing in repairs, 75 mm size, brass chromium plated, superior quality shower rose with or without swivel joints but with CP brass arm suitable for 15mm bore pipe complete all as specified and directed.

Supply and fix in repair vitreous china, wash hand basin, white, flat back, size 550 x 400 mm including brackets, brass chromium plated waste fitting and PVC waste pipe of 32 mm dia complete all as specified and directed.

Supply and fix in repair sink with drain board made of stainless steel 0.80mm thick for kitchen with plug, washer, chromium plated brass waste fitting and PVC waste pipe including bedding in cement mortar in (1:3) on dwarf wall or fixing on cantilever brackets and connecting union to pipes, overall size 1140mmx510mm, bowl size 560mmx 405mm x160mm complete all as specified and directed.

Supply & fix in repair CP brass tubular towel rail 20mm dia, ‘D’ type, 60cm long between the flanges complete all as specified and directed.

Supply & fix in repair CP brass bib taps 15mm dia of superior quality with long body cast copper alloy with crutch or butterfly handle screwed for iron pipe fixed complete all as specified and directed.

Supply & fix in repair 15mm dia pillar taps of superior quality cast copper alloy with capstan heads, cromium plated screwed down high pressure with or without lettered hot or cold with long screwed shanks and fly nuts, screws for iron pipe complete all as specified and directed.

Supply and fix in repairs 15mm bore single lever centre hole basin mixture of superior quality with capstan heads, chromium plated, cast copper, screwed down high pressure, with or without lettered hot or cold with long screwed shanks and fly nuts, screwed for iron pipe fixed as complete all as specified and directed.

Supply and fix in repair 15 mm bore angle valve, cast copper alloy, chromium plated, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron or for union complete all as specified and directed.

Supply & fix in repair CP brass shower rose of superior quality long body with or without swival joints of 125mm size fixing with 15mm pipe complete all as specified and directed.

Supply & fix in repair 15 mm dia chromium plated brass three in one wall mixture suitable for both telephonic and overhead shower with long bend pipe complete all as specified and directed.

Demolition and breaking up drain pipes ( SGSW, AC or reinforced concrete) or PVC pipe set in cement mortar for 75mm / 100mm internal dia of pipe and including removal from the site complete all as specified and directed.

Supply and fix 75mm bore UPVC (SWR) pipes single socketed in any length with rubber ring joint, laid in trenches/under floor complete all as specified and directed.

All as per item No 81.00 above but 100/110mm bore PVC (SWR) pipe

Supply and fix in repair 75mm bore PVC (SWR) bends complete all as specified and directed.

Supply and fix in repair 75mm bore PVC (SWR) junction single, (single T) equal or unequal complete all as specified and directed.

Supply and fix in repair 110mm bore PVC (SWR) junction single, (single T) equal or unequal complete all as specified and directed.

Supply & fix in repair 110 PVC (SWR) vent cowl complete all as specified and directed.

Supply and fix in repair 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement all as specified and directed.

Supply and fix in repair PVC (SWR) gully trap 125/110mm, setting and jointing with solvent cement complete all as specified and directed.

Supply and fix in repair 100mm dia CP grating complete all as specified and directed.

Supply and fix in repair 125mm dia CP grating with hole for waste pipe complete all as specified and directed.

Supply and fix in repair 32mm bore PVC waste pipe for wash hand basin all as specified and directed by Engr-in-Charge.

Supply and fix in repair glass shelf assembly fancy type made of 5 to 6 mm thick sheet glass of size 600mmx120mm fixed with chromium plated brackets complete all as specified and directed.

Supply and fix in repair glass corner shelf fancy type made of 6 to 7 mm thick sheet glass of size 250mmx250mm fixed with chromium plated brackets complete all as specified and directed.

Supply and fix in repair PVC bends or shoes any radius 110mm bore complete all as specified and directed.

Taking up or down steel tubing and connection 15 mm bore pipe complete all as specified and directed.

All as per serial item No.95 above but 20mm bore.

Supply and fix GI tubing 15mm bore medium grade with all fittings fixed to wall, ceiling or laid in floor complete all as specified and directed.

All as per item No 97.00 above but 20mm bore.

Disconnecting existing water storage tanks, setting aside (or lowering if required) for repairs cleaning etc and hoisting if required reconnecting and re-fixing in position and cleaning and removing all scale and dirt, etc from tanks and from mouths of circulating pipes for tank capacity exceeding 250 & not exceeding 500 ltr including writing month and year of cleaning on tank surface in bold letters of height not less than 50mm and width not less than 20mm using thick synthetic enamel paint etc complete all as specified and directed.

Supply and fix framed work as in doors or gates of angle or other section with gusset plates, rails, braces etc complete, drilled for fixing of steel sheeting or other covering, doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings(exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete of steel grade Fe-290, E-165 complete all as specified and directed.

Supply & fix 500 ltrs capacity rotational moulded polyethylene water storage tanks three layerd (cylindrical vertical with closed top) hoisted & fixed in position including dismantling existing tank complete all as specified and directed.

Supply & fix in repair ball valve high pressure PTMT with epoxy coated aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 20mm - 210 gms complete all as specified and directed.

Taking down old existing water proofing treatment from the top of RCC/ arch slab, including taking down existing PCC padding or plaster and hacking the top of RCC slab, cleaning with water and disposal of rubbish off the premises complete all as specified & directed.

Material & Labour for 40mm thick average thickness of PCC 1:2:4 type B-1 (using 20mm graded stone aggregates) as in padding on roof finished even and fair without using extra cement all as specified and directed.

Material & labour for cleaning of concrete or plastered surfaces of roof and applying priming coat of bituminous primer @ 0.30kg per Sqm followed evenly by a tack coat @ 1.20 kg per Sqm using 85/25 grade industrial hot blown bitumen , over it laid with APP modified polymeric water proofing membrane minimum weight 3.6 Kg per Sqm reinforced with non-woven polyester fabric (weight not less than 160 gm per sqm) unrolled & bonded to substrate with side and end laps 75mm & 100mm as per manufacturer’s instruction and applying over it a tack coat using 85/25 grade industrial hot blown bitumen @ 1.20 kg per Sqm and finally finished the top of polymeric water proofing membrane with a coat of bituminous aluminum paint @ 0.20 kg per Sqm as per manufacturer’s instructions, complete all as specified & directed.

Supply only integral water proofing compound complete all as specified and directed.

Material and labour for applying one coat of exterior emulsion paint (weather proof) on wall surfaces including preparation of old painted surfaces complete all as specified & directed.

Supply & fixing mild steel framed work such as grills, grating,gauge etc with end of bars shouldered and/ or riveted forged into spikes, framed guard bars, railings and similar work complete conforming to Fe-290 Gde E-165 complete all as specified & directed.

Material and labour for 2nd class hard wood, (sal) in scantlings clean sawn complete all as specified and directed. by Engineer-in-charge.

AEGIS INTERNATIONAL

vibha associates

jitendra AND Co

SHAKTI CONSTRUCTION CO