Spl repair of OTM Bldg No P-07 of Dogra and Addn/ altn of toilet and bathroom OTM P-1 (C-Block) trg cell of Engr regt under GE (East) Ferozepur Cantt

Dismantling floor, hearth or wall tiling including cement mortar beding (but not backing),removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed.

S&F non skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in flooring etc set and jointed in neat cement slurry and pointed with white cement mixed with pigment to match with colour of tiles over and incl screed bedding 15mm thick in cm(1:6), complete all as specified and directed.

M & L Glazed Ceramic coloured tiles 350 mm x 250mm x 7 mm/ 450x300x7 mm thick over and incl 10 mm thick rendering in CM 1:4 on vertical surfaces, set and jointed in neat cement slurry and pointed with white cement mixed with pigment to match colour of tiles, complete all as specified & directed.

S&F for Joint less non skid ceramic tiles 8-9 mm thick (square/rectangular) polished dark shade, area of each tile exceeding 0.18 but n exc 0.38 sqm in flooring etc set and jointed in neat cement slurry and pointed with white cement mixed with pigment to match with colour of tiles over and incl screed bedding 15mm thick in cm(1:6), complete all as specified and directed.

M&L machine cut kota stone flooring 18-20 mm thick over & including 15mm thick screed bed in cement mortar 1:3, laid jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing and including roughing surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust and including dismantling laid bedded and pointed in any mortar etc, complete all as specified and directed.

M&L machine cut kota stone 20-25 mm thick as in risers of steps, skirting, dado etc over & including 10mm thick rendering in CM 1:3, jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing and including roughing surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust and icluding dismantling etc, complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) of size not exc 1.50 Sqm each including cutting holes of appropriate size for insertion blocks of cement concrete for hold fasts, complete all as specified and directed.

All as per item No 7 here-in-before but size exceeding 1.5 Sqm & not exceeding 4 Sqm each, complete all as specified and directed.

M & L Pressed steel frames made of 1.25mm thick MS sheet of profile 105x60mm for door and window frames with one rebate including lock strike plate, shock absorbers, 20mm dia 60mm long MS conduit for housing of a drop bolt, butt hinges, hold fasts/lugs etc and treating of internal surfaces of chowkhats and hold fasts/lugs with a coat of coal tar or black paint including hinges, hold fasts/lugs etc, complete all as specified and directed.

S&F Pressed steel frames made of 1.25mm thick MS sheet of profile 125x60mm for door and window frames with one or more rebates incl lock strike plate, shock absorbers, 20mm dia 60mm long MS conduit for housing of a drop bolt, butt hinges, hold fasts/lugs etc and treating of internal surfaces of chowkhats and hold fasts/lugs with a coat of coal tar or black paint incl hinges, hold fasts/lugs etc including making good jambs portion by providing plaster in CM 1:4 and finishes as per existing, complete all as specified and directed.