SE/GC/TIN/C35/2019-20

Amount

Dismantling the existing damaged wooden doors, windows and ventilators including frames, hinges and fastening including cost of lead, lift etc., complete.

Dismantling the existing damaged Cement mortar flooring including cost of lead, lift, etc., complete.

Dismantling the existing pressed tile & weathering coarse including cost of lead, lift etc., complete.

Chipping and clean removal of cement plastering from wall and ceiling including all cost labour, materials, lead, lift, labour etc complete.

Brickwork in CM 1:3 mix using II class chamber burnt brick of size 9"x41/2"x3" including cost of all materials, labour, lead, lift, curing etc., complete.

Supplying and fixing in position of weld mesh Grill 25x25mmx10 Gauge using 35x35x5mm ISA for frame with and 25x25x5mm ISA angle for bracing as per specification including cost of all materials, labour, etc., complete. (1.78mx1.60m).

Supplying and fixing in position of single half weld mesh 25x25mmx10 Gauge and half MS sheet door of required size with 35x35x5mm ISA for outer frame and 25x25x5mm ISA angle for shutter frame and braced with 20x5mm flat as per specification.

Supplying and fixing in position of single MS sheet door of required size with 35x35x5mm ISA for outer frame and 25x25x5mm ISA angle for shutter frame and braced with 20x5mm flat as per specification including concreting, plastering for re-fixing cost of all materials necessary fittings, aldrop tower bolt, handle, lead, lift etc., complete.

Supplying & fixing in position of four/two weld mesh 25x25mmx10Gauge and MS sheet covered grill window of required size with 35x35x5mm ISA for outer frame and 25x25x5mm ISA angle for shutter frame and braced with 20x5mm flat as per specification including concreting, plastering for re-fixing cost of all materials, fabrication charges, transport charges, lead, lift etc., complete.

Supplying & fixing in position of double leaf door of required size with 35x35x5mm ISA for door frame and 25x25x5mm ISA angle for shutter frame, 25x4mm thick flat bracing as per specification including cost of all materials, necessary fittings, aldrop, tower bolt, handle, lead, lift etc., complete. (0.80x1.85m)

Cement mortar floor finishing with CM 1:3, 20mm thick including cost of labour, materials, lead, lift, etc., complete.

Paving the approved quality of vitrified tiles of size 600x600x8mm over a base layer of cement mortar 1:3, 20mm thick and pointing with same coloured cement finishing the joints including cost of all materials, labour, lead, lift, etc., complete.

Paving the approved quality anti skid ceramic tiles of size 305x305x6mm, over a base layer of Cement mortar 1:3, 20mm thick and pointing with same coloured cement finishing the joints including cost of all materials, labour, lead, lift, etc., complete.

Dadooing the wall with best approved quality glazed tiles of size 300x200x6mm, over a base layer of CM 1:2, 12mm thick pointing with same coloured cement finishing the joints including cost of all materials, labour, lead, lift, etc., complete.

Plastering with CM 1:5 mix 12mm thick for wall including cost of labour, materials, lead, lift, curing, etc., complete.

Plastering with CM 1:3, mix 12mm thick for ceiling/water tank wall including cost of labour, materials, lead, lift, labour, curing etc., complete.

Supply and run of 2 of 4 Sqmm (56/0.3) PVC insulated SC unsheathed cu. Conductor of 1100V grade in 25mm dia GI pipe (Class 'B') bent at both ends with necessary angle iron up right and end supports for mains (SD-70).

Supply and run of 2 of 4 sqmm (56/0.3) PVC insulated SC unsheathed cu. Conductor of 1100V on 7/20 GI bearer wire for service connection mains. (SD.65).

Supply and fixing of TNEB meter Board suitable for 32A single phase service connection with 1 Nos. 32A Fuse unit (500V) 32A neutral link and earth link (1"x1/8" Copper flat) and phase bulb on TW plank of size 600mmx450mmx19mm with supporting TW reepers of 1" thick an either side with painting with suitable bolt and nuts for fixing the TW plank on wall with earth connection and inter connection with 7/20 PVC insulated copper wire from EB meter to fuse unit.

Supply and fixing of 32 Amps DP Switch of 500V with metal clad with fuse and neutral (Side Handle) on suitable TW Board, with earth connection and inter connection with 7/20 PVC insulated copper wire from EB meter to fue unit.

Wiring with 2x1.5sqmm (22/0.3) PVC insulated unsheathed Sc Cu. Conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with TW switch box with 5A F.T. switch, covered with hylem sheet of 3mm thick with painting of suitable colour for open PVC light point/fan point (For electronic regulator).

Supply and fixing of 5A 3 pin and 2 pin combined flush type wall socket with 5A flush type switch on suitable TW box.

Wiring with 2x4sqmm (56/0.3) PVC insulated SC unsheathed Cu. Conductor of 1100V grade in suitable PVC accessories with 150mmx100mmx113mm TW switch box with 3mm thick Hylem sheet cover for 15A 3 pin non inter locking CS plug with painting of suitable colour with continuous earth wire connection of 14 SWG TC wire for open PVC plug point.

Supplying and fixing box type 4'x40W flouresent fittings complete with copper choke and condenser, (one number 4'x40W tube) with T.W round block on wall or ceiling with PVC unsheathed leads from terminals to the fittings with 1 No tube.

Supplying and fixing of 1400mm sweep (56") AC ceiling fan with regulator with 300mm down rod on the existing clamps of approved quality of crompton/Rally/Usha/Bajaj including cost of all materials, lead, lift etc complete.

Supply and fixing of WT bulk head fitting with guard (Philips/Bajaj/Crompton/K.Lite) suitable for incandescent lamp with 60 W bulb.

Supplying and fixing of fancy shade approved by Engineer at site with 1 No. 18W CFL bulb for BH point.

Earthing as per P.W.D standard with an earth electrode of 2 Mtr. Class 'B' GI pipe of dia not less than 32mm complete with necessary masonry work.

Supplying and fixing in position of 15/12mm dia brass chromium screw down bib cock of best quality including cost of materials, lead, lift, labour etc complete.

Cuddapah slab sink of size 600mmx 450mmx 200 mm with 32mm dia 'B' class GI waste water pipe & 32mm dia C.P waste coupling including cost of materials, lead, lift, labour etc., complete.

Supplying and fixing two side polished 30mm thick cuddappa slab for cupboards including cost of all materials, lead, lift, etc., complete.

Supplying and fixing of Anodised Aluminium Towel rail 60cm long and 20mm dia with Brackets including cost of materials, lead, lift, labour etc., complete.

Supplying and fixing in position best quality PVC soil/waste pipe 75mm dia-6Kg/sq.cm, Finolex or Equivalent (with ISI monogrm) including GI TEE, GI Elbow wherever necessary all materials, labour, lead, lift, T & P, etc complete.

Supplying and laying 25mm dia PVC pipe 10Kg/cm2 of approved quality and best make (Finolex or equivalent) including fixing GI specials, including the cost of all materials, labour, lead, lift, T & P etc complete.

Providing and fixing in position Indian water closet ORISSA PAN of size 580x440mm white glazed ware of approved make with P or S trap conforming to IS 2556 part XII (Parryware or equivalent) with sand cusion and forming flooring around the closet using 40mm broken brick jelly concrete 1:2:5 100mm thick and finishing the top to required slope including cost of all materials, lead, lift etc complete.

Supplying and fixing in position cast iron Nahini/Floor trap with stainless steel grating approved make and quality and size 100x75mm fixed over a bed of brick jelly lime concrete and finised with CM 1:3, including the cost of all materials, labour, lead, lift, T & P, etc., complete.

Supplying and fixing in position best quality PVC soil/waste pipe 110mm dia - 6Kg/sq.cm, Finolex or Equivalent ( with ISI monogrm) including GI TEE, GI Elbow, excavation wherever necessary all materials, labour, lead, lift, T & P etc complete.

Supplying and fixing in position best quality PVC 110mm dia down fall pipe - 6Kg/sq.cm, having ISI mark including the cost of PVC pipe, shoe, bend all materials, labour, lead, lift, T & P, etc.,complete.

White washing one coat with shell lime including cost of all materials, labour, lead, lift, T & P, etc., complete.

Colour washing Two coats using oil bound distember over one coat of white cement after through scrapping including the cost of all materials, labour, lead, lift, T & P etc., complete.

Painting 2 coats of approved quality of enamel paint over a primary coat for all exposed faces of new/old steel doors & windows and grill etc including cost of all materials, scrapping, labour, lead, lift etc., complete.

Supplying and fabricating and placing in position of MS/RTS steel reinforcement for RCC works including labour for cutting, bending, tying, and fixing in position as per specification including cost all materials, lead, lift, cost of binding wire etc complete.

Supplying and fabricating and placing in position of MS/RTS steel reinforcement for RCC works including labour for cutting, bending, tying and fixing in position as per specification including cost all materials, lead, lift, cost of binding wire etc., complete.

Providing weathering coarse with one coarse of pressed tiles of size 23x23x2cm embeded in CM 1:3, mixed with crude oil 10% by weight of cement and pointed with the same oil mixed CM 1:3 used over a bed of brick jelly 20mm size in lime the proportion (being 32:12.5) (No sand) required thick 80mm with the required slope and beaten with wooden beaters including cost of all materials, curing etc complete.

GST 12% as per Govt. Norms

Sp Constructions

K.KALAN