Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹10.5 L
EMD Value
₹26,125
Closing Date
6 Dec 2023, 11:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Rural Drinking Water and Sanitation Department
Executive Engineer
Providing FHTCS to 13 Households in Chikkathimmaganahalli Habitation of Angarekanahally Village in Chickballapur taluk of Chickballapur District
RWSSD/2023-24/WS/WORK_INDENT5278/CALL-2
RWSSD/2023-24/WS/WORK_INDENT5278/CALL-2
Open
Water supply/sewage lines
Electronic Documents, First(One Cover)
RWSSD Division Office Chickballapura
4 documents required · 4 mandatory
₹500
₹26,125
28 Nov 2023
28 Nov 2023
4 Dec 2023
Providing FHTCS to 13 Households in Chikkathimmaganahalli Habitation of Angarekanahally Village in Chickballapur taluk of Chickballapur District
Cutting of road surface for pipeline trenches and disposing of the excavated stuff as directed including barricading, danger lighting etc. in the following classification.
Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights...
Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and te...
Earth work excavation for pipeline trenches in all kinds of soils by mechanical means above 600 mm trench width as per drawing and technical specifications, including setting out, construction of shor...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Supplying HDPE pipes conforming to IS 4984:1995 with latest amendments and conveying to work site including loading and unloading at both destination and rolling, lowering into trenches, l...
Supplying HDPE pipes conforming to IS 4984:1995 with latest amendments and conveying to work site including loading and unloading at both destination and rolling, lowering into trenches, l...
Providing and fixing 3 layer PP-R (Poly Propylene Random Copolymer) pipes confirming to IS.15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply...
Supply and delivery at site of brand new Electrofusion Coupler as per IS 8360 -1977 with latest amendments 63 mm dia
Supply and delivery at site of brand new Electrofusion Coupler as per IS 8360 -1977 with latest amendments 75 mm dia
Supply and delivery at site of brand new Electrofusion TEE as per IS 8360 -1977 with latest amendments 75 mm Dia
Supply and delivery at site of brand new Electrofusion Elbow as per IS 8360 -1977 with latest amendments 63 mm Dia
Supply and delivery at site of brand new Electrofusion Elbow as per IS 8360 -1977 with latest amendments 75 mm Dia
Supply and delivery at site of brand new Compression MTA as per IS 8360 -1977 with latest amendments 63 mm Dia
Supply and delivery at site of brand new Compression MTA as per IS 8360 -1977 with latest amendments 75 mm Dia
Supply and delivery at site of brand new best make Gate Valve as per IS 778/1984 with ISI Mark and as per its latest amendments 65 mm Dia
Supply and delivery at site of brand new best make Gate Valve as per IS 778/1984 with ISI Mark and as per its latest amendments 80 mm Dia
Supply and delivery at site GM (copper alloy) gate valves confirming to Class-I as per IS 778 with latest amendments, 1 No. screwed in bonnet inside screw, rising spring spindle integral seat screwed ...
Labour charges for making flanged joints including cost of jointing materials comprising of rubber insertion, bolts and nuts including giving hydraulic test to the required pressure as per ISS with al...
Providing Air valve conforming to IS 1538 (Part-I to XXII) 1978 with latest amendments if any 80 mm dia
Providing Air valve conforming to IS 1538 (Part-I to XXII) 1978 with latest amendments if any 100 mm dia
Supplying and fixing of fixed height surface box H-4057 MD-KU with PP 40% GF Lid, Housing of PA+, Locking clip of PP with Notched bolt M 12 x 130 hexagon head A2-70 for service connection valves, desi...
Providing, laying, spreading and compacting graded stone aggregate to Wet Mix Macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Materia...
Providing and constructing un-reinforced plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M20 (Grade), c...
Providing and fixing of typical PMGSY informatory sign board with Logo as per MORD specifications and drawing. i)The board will be a composite unit consisting of three plates of Aluminium Composite Ma...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixe...
Providing T.M.T steel reinforcement for R.C.C work including straightening, cutting, bending, hooking, placing in position, lapping and / or welding wherever required, tying with binding wire and anch...
Supply and fixing of Horizontal Mechanical Woltman type hemetically sealed water meters with copper Glass register with IP 68 protection. Themeter shall be removable mechanism type manufactured as ISO...
Painting New Letter and Figures of any Shade with synthetic enamel paint black or any other approved colour to give an even shade complete as per specifications. (“i) Hindi ( Matras commas and the l...
Supplying and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of ductile iron (DI) conforming to IS 1865 and of grade GGG 40/50, shaft of stainless steel, wedge ...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixe...
Providing and laying in position Reinforced cement concrete for columns, braces and ring beam above ground level. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per re...
Providing and laying in position Reinforced cement concrete for top slab of water tank over the staging above the ground level. The granite/trap/basalt crushed graded coarse aggregates and fine aggreg...
Providing T.M.T steel reinforcement for R.C.C work including straightening, cutting, bending, hooking, placing in position, lapping and / or welding wherever required, tying with binding wire and anch...
Labour charges for fabricating Mild Steel or TMT Steel bars of all sizes for reinforcement for RCC works, including conveying steel to work spot with all lead, cleaning, straightening, cutting, bendin...
Providing and fixing MS ladder between landings, 45 cms wide using angle iron of specified sizes, 20mm MS bars at 25 cms. centre to centre, with necessary supports of same angle iron etc. as directed,...
Providing and fixing MS inspection door of size 60 cms x 60 cms,including MS frame made of 50x50x6mm angle, shutters made of 3mm thick MS sheets, with hinges, locking arrangements at top etc. includin...
Supplying and fixing DI/CI puddle flanges conforming to IS 7181-1986 with latest ammendments., in position for RCC walls including hoisting and conveying them to work spot with all lead and lifts etc....
Providing two coats of water proof cement painting with approved colour and shade over one coat of primer including scrapping the surface with wire brushes etc. before removal of scaffolding for new R...
Supplying, Laying and Jointing Cast Iron (CI) double flanged pipes true to line / hoisting of DIflanged pipe in position and aligning to correct plumb, including cost of jointing materials, conveying ...
Providing 80 mm dia Bell mouthed pipes (flanged) confirming to IS 1538 (Part-I toXXII) 1978 with latest amendments if any cost of all materials, labour charges etc.complete.
Supplying and fixing lightening arrestor with aluminium strip 25mm x 3mm size including finial and grounding, aluminium strip to be embeded in one of the columns in and independent GI conduit of 40mm ...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...
Providing and fixing of Electro fusion saddle company Tapp with BS EN12201 -3:2011, PN 12.5 rating and food grade raw material as per BS 6920 with material of construction PE 80 or PE 100 and colour ...
Providing, Laying and Fixing GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary, including t...
Supply of PPR Male threded coupling confirming to IS 15801-2008 and DIN standards 8077/8092 20mm
Supply of PPR Female threded coupler confirming to IS 15801-2008 and DIN standards8077/8092 20mm
Supply of PPR Female threded elbow confirming to IS 15801-2008 and DIN standards 8077/8092 20mm
Supply of PPR Plain union cap confirming to IS 15801-2008 and DIN standards 8077/8092 20mm
Providing and fixing in position brass bib cock of approved quality 15mm nominal bore including cost of all materials, labour and HOM of equipments with all leads complete as per specifications. Speci...
Supply and fixing of HDPE water meter box with locking arrangement to protect the water meter of Class ‘B’ Multijet type of size 15 to 32 mm including HDPE box with base dia 300mm x lid dia 200mm ...
Supplying and fixing Multijet class B inferential type, AMR compatible water meters with IP 68 protection totalizer confoming to IS 779 with its latest amendments of following size to service connecti...
Supply of PPR Gate valve confirming to IS 15801-2008 DIN standards 8077/8092 20mm
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and for...
Flow Control valve 5LPm/10LPM/15LPM:Providing and fixing Flow control valve using food grde materials SS 316 ball / 1/2" [15mm] including cost of all materials, labour charges, HOM and testing complet...
PVC pipes of 4 Kg/cm2 for 90mm(0.917)
Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...
Supplying of 1600mm Dia NP2 Class (Cistern) material transportation inculding loading and unloading charges and complete.
Crawler mounted Crane 80 t capacity charges for lifting of 1600mm Dia NP2 Class (Cistern)- Crane 80 Tonne
Labour charges for fabricating Mild Steel or TMT Steel bars of all sizes for reinforcement for RCC works, including conveying steel to work spot with all lead, cleaning, straightening, cutting, bendin...
Providing different dia Medium class 90” double flanged bend confirming to IS 1538 (Part-I to XXII) 1978 with latest amendments if any cost of all materials, labour charges etc. complete.
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
kw-1 (1).pdf
Tender Document • 9.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .