CONSTR OF 08 X PERMT SENTRY POST AT 9FFA BEIRCHHA AND PROVN OF GATE AT STAIRS ASSOCIATED WORK AT OFFR MD ACCN AT GOLF VIEW AND PROVN OF IRON GATE TO MAIN ENTRANCE OF OFFICE JCO OR MD ACCN DOG MENACE AT OSM NSM MALCOLM LINE HD ENCLAVE UNDER GE MIS MHO

Amount

Surface excavation n.exc (not exceeding) 30cm deep and averaging 15cm deep and getting out in Hard/Dense soil complete all as specified and directed.

Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth for foundation, etc or for shafts, wells, cespits, manholes pier hold etc n.exc 10 Sqm on plan and n.exc 1.5m in depth and getting out in Hard/Dense soil plete all as specified and directed.

M&L for PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in foundation filing,sub base of floor etc complete all as specified and directed.

S&F mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required including cranking, bending spirally and binding with and including mild steel wire (annealed) not less than 0.90 mm dia, etc complete all as specified and directed.

S&F mild steel TMT bars 5mm dia and over upto and including 10mm dia in strriups,spaces,nibs and binders complete all as specified and directed.

Formwork to sides of concrete foundations, footings, bases of columns, raft and beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter finished fair complete all as specified and directed

M&L for RCC M-25 (Design Mix) using 20 mm graded stone aggregate as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed

Returing, filling in trenches, including spreading, levelling, watering and well ramming in layers not exc 25 Cm in hard/dense soil complete all as specified and directed.

M&L for sand filling under floor including waterring and consolidaion complete all as specified and directed.

Removing excavated material (soil) to a distance not. exc. 50 m and depositing where directed at a level nexc 1.50 m above the starting point complete all as specified and directed.

Formwork to sides of pillars, posts, struts, piers, columns and stanchions finished fair complete all as specified and directed.

M&L for RCC M-25 (Design Mix) using 20 mm graded stone aggregate as in Columns, pillars, piers, posts and struts complete all as specified and directed.

M&L for brick work with using flyash bricks, straight or curved on plan exc. 6.00m mean radius built in cement mortor 1:6.etc complete all as specified and directed.

Formwork to sides and soffits of floor or roof beam, beam hauchings, bands, girders, bressummers, lintels, etc for fair finish surfacecs complete all as specified and directed

M&L for RCC M-25 (Design Mix) using 20 mm graded stone aggregates as in beams, bands, cantilvers, bressummers, linters, chajjas, etc over 1.5m span etc complete all as specified and directed.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work, not exceeding 200mm thick (horizontal or sloping), etc For Fair Finish Surface complete all as specified and directed.

Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide complete all as specified and directed.

M&L for RCC M-25 (design Mix) using 20 mm graded stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, etc complete all as specified and directed.

M&L for moorum / red bajri filling in floors or pavings, laid in layers nexc 15cm thick, spread, levelled and rammed including waterring and consolidation complete all as specified and directed.

M&L for hardcore of gauge n exc. 63 mm,of broken stone deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for 25mm thick cement concrete type B-0, 1:2:4 (using 12.5 mm graded aggregate) for levelling course in floors complete all as specified and directed.

M&L for 75mm thick cement concrete 1:3:6 type C1, with using 20mm graded stone aggregate as in floor/ plinth protection finish the surface even and smooth with using extra cement including filling the expansion joints with bitumen filler / filler boards and necessary form work etc complete all as specified and as directed.

M&L for rendering 15mm thick cement plaster in CM 1:6 on other than fair faces of brick work or concrete surfaces and surface finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15mm thick cement plaster in CM 1:4 on fair faces of brick or concrete surface with liquid water proofing compound @ 200 ml per bag finished even and fair without using extra cement complete all as specified and directed. Note:- Liquid water proofing compound to be measured paid separately.

M&L for rendering 5mm thick in ceiling CM 1:3 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L for applying two coats of 1st Quality oil emulsion distemper over new prepared surface of wall with putty complete all as specified and directed. Note:- Putty shall be measured and paid seperately.

M&L for preparation of new plastered surfaces of walls and applying two coat of Acrylic Smooth exterior paint of required shade (@ 1.67 ltr/10 sqm) over over a coat of primer(@ 2.20 kg/10 sqm) same make base over a coat of putty all as specified and directed. Make Asian- Apex Or Make/Brand as specified in Particular Specification. Note:- Putty shall be measured and paid seperately.

M&L for three coats of white wash on ceiling on new plastered surfaces including preparation of surfaces complete all as specified and as directed.

M&L for 2mm thick cement wall care putty complete all as specified and directed.

M&L for 75mm thick Cement concrete type D-2, 1:4:8 (using 40mm graded crushed stone aggregate) as in sub base complete all as specified and directed.

M&L for 60mm thick machine pressed precast concrete interlocking paver block (glossy finish) of M-35 Gde of approved shape, size and colour conferming to IS 15658-2006 and including joints filled with sand complete all as specified and as directed.

M&L for Kota stone slab flooring 18-20 mm thick (+ 2mm) thick of with 58cm x 58cm in size (or nearest size as available in the market) laid over and including 25 mm thick PCC 1:2:4 type B-1 using 20mm graded stone aggregate and 15mm thick screed bed in cement mortar 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing to mirror finish complete all as specified and directed.

S&F 1mm thick mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws,clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required, but in hearths; covering to door shutters; covering to door chowkats (frames);chullah hoods; water tanks; water troughs;ducts; urinal troughs and funnels, etc. cut to size edges beaded if directed, holes punched;including round headed screws, clout nails or rivets and fixed to wood or steel members, etc.,with plain 40 mm lap joints or welded/ riveted seams including bending, turning up,mitred angles, stopped ends, outlets, etc. complete all as specified and directed.

S&F mild steel framed work as in doors window or gates of angle or other section with gusset plates, rails,braces, etc. complete, drilled for fixing of steel sheeting or other covering. Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering,running rails and guides) and hanging; also fastening and fixing, Fe 410-W (Gde-E-250) quality-A complete all as specified and directed.

M&L for R.R. masonry walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in CM 1:6 and bonded with bond stone of concrete 1:3:6 type C-1 (using 20 mm graded stone aggregate) complete all as specified and directed.

M&L for flush Pointing in CM 1:4 to random rubble stone masonry brought upto course or uncourse complete all as specified and directed

M&L for preparation of new steel and iron surfaces of any description, over 10 cm in width or girth , not otherwise described and painting with two coats of synthetic enamel paint over a coat of red oxide primer etc by spray/mechanical complete all as specified and as directed.

M&L for plain cement concrete 1:2:4 type B1 (using 20mm graded crushed stone aggregate) as in leveling course and other works as in roof, kerb, coping, padding etc complete all as specified and as directed.

M&L for brushing with neat cement slurry @ 3 Kg per Sqm area mixed with integral water proofing compound as specified and directed. Note: WPC shall be measured and paid separately.

M&L for rendering 10mm thick in cement mortar 1:3 mixed with integral water proofing compound while concrete surface is green and finish the surface even and smooth without using extra cement complete all as specified and directed. Note: WPC shall be measured and paid separately.

M&L for preparation of surfaces for applying bituminous primer (conforming to IS-3384-1965) @ 0.40 Kg/Sqm complete all as specified and directed.

M&L for applying two coat of Industrial bitumen grade of 85/25 at the rate of 1.2 Kg per Sqm including cleaning surfaces (1st coat for bonding material below membrane and 2nd coat on top of membrane) complete all as specified and directed.

M&L for 3mm thick APP based polymeric membrane minimum weighing 3kg/sqm and reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified and directed. Note: Application of APP membrane must be done by authorised applicator of membrane manufacturer.

M&L for applying two coats of bitumen based aluminium painting @ 0.15 Kg / sqm each coat on water proofing treatment with preparation of surface as on non assesible area complete all as specified and directed.

Supply only Liquid Water proofing compound PIDIPROOF LW+ of Dr FIXIT Or Make/Brand as specified in Particular Specification complete all as specified and directed.

M&L for Vitrified ceramic coloured tiles 10 mm thick, (square or rectangular) area of each tile exc 0.18 Sqm but n. exc 0.38 sqm in floors etc , over and including 15 mm thick cement mortar (1:6) screed etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the coloured tiles complete all as specified and directed.

M&L for Vitrified ceramic coloured tiles 7mm to 8mm thick, (square or rectangular) area of each tile exc 0.18 Sqm but n. exc 0.38 sqm as in riser of steps, skirting, dado and pillar etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the coloured tiles over and including 10mm thick rendering in CM (1:4) complete all as specified and directed.

M&L for granite (of any type) stone slab 18 to 20mm thick machine cut and machine polised, in skirting, Kitcehn platform /dado window cill and jambs etc laid over cement screed jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding the edges half round and polishing including pinning in brick/concrete wall to hold & support the vertical surfaces to granite work including drilling to wall complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L for chequered cement concrete tiles with grey cement and pigment of size 20cmX20cmX25 mm thick ,set and jointed and pointed in neat cement slurry in floor etc over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for stainless steel railing (Grade SS-304) chromium plated finished heavet duty including all fixing arrangement complete and fixed in poisition complete all as specified and directed.

S&F mild steel framed work as in doors or gates of angle iron & P section door frame & door shutter of any other section with gusset plate, rails, braces piutals etc complete, drilled for fixing of steel sheeting or other covering etc, to prepared for hanging or sliding with including either hooks and hinges also fastening grills, grating, hold fast of doors and windows chowkat etc, with ends of bars shouldered and or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walkways; railings; framework of water tank stand, Hinges,pintal, handle fixing and similar work confirming to fe 290 Gde E-165 complete all as specified and directed.

S&F 150 mm Butt hinges, heavy weight, cold rolled mild steel, and fixed complete all as specified and as directed by Engr-in-Charge

S&F floor spring for MS door take in same poisition complete all as specified and as directed by Engr-in-Charge

S&F 8 mm dia & anchor fastner use to fix mild steel door including all fitting to come on same poisition etc complete all as specified and as directed by Engr-in-Charge

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with stainles steel wire stapel etc complete all as secified and as directed

M&L for preparation of old plastered surface of wall of any description and applying one coat of oil boud distemper complete all as secified and as directed.

M&L for machine cut kota stone slab in flooring 20-25mm thick laid over and including 15mm thick screed bed in CM 1:6 & cement mixed with pigment to match the shade of slab including rubbing and laid over and including and polishing complete all as specified and as directed.

S&F in repairs Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts,including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc.cComplete all as specified and as directed (each line wire to be measured).

Excavation in post hole or similar hole, each not exceeding 0.50 Cum, getting out in Soft/ Loose soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering, and removing surplus soil to a distance n.exc 50m & making good surface complete all as specified and directed by Engr in Charge.

M&L for PCC 1:2:4 type B2 (using 40 mm graded stone aggregate) as in foundation ,post, etc complete all as specified and directed by Engr in Charge.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc., including provision of binding wire. complete all as specified and directed by Engr in Charge.

Supply only Chain link MS galvanisd fencing, any size or type complete all as specified and directed.

S&F 11 to 15mm dia of neck MS Screw bolts(Machine made ) with hexagonal or square heads at one end and screwed at other end or both end, and screwed end to be fitted with washer and one hexagonal or square n.exc 20 cm long etc complete all as specified and directed.

Surface dressing n. exc 15 cm deep in any type of soil and getting out complete all as specified and directed

M&L for PCC (1:3:6) type C-2 (using 40 mm graded crushed stone aggregate) as in sub base, levelling course, etc complete all as specified and as directed.

M&L for chequered cement concrete tiles (glossy finish) with grey cement and pigment of size 40cmX40cmX40mm thick ,set and jointed and pointed in neat cement slurry in floor etc over and including 15mm thick screed bed in CM 1:6 complete all as specified and as directed.

S&F mild steel Hollow Section work in tubular trussles, purlins, rafter, tubler column, where connected common rafter and running rails fixed with angle cleat or other connection plates including special shaped washer etc, complete using ERW or induction butt welded tubes conforming IS-4963,1993 and IS-1161-1979 grade ST-240 complete all as specified and as directed.

M&L for machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over and including 10 mm thick rendering in CM 1:4 on vertical /sirting etc. complete all as specified and directed

M&L for white marble 18 to 20mm thick (table rubbed and polished) in floor, steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade complete all as specified and directed

Demolition of brick work or stone boulders masonry built in cement mortar incl;uding all Quoins , archeas, pillars etc but excluding ashlar facings, dressed stone work and precast concrete articlescomplete all as specified and directed

Taking down cement or cement lime plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and directed

M&L for rendering 10mm thick in CM (1:6) on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of new plastered surfaces or un decorated surfaces of wall and applying three coats of white wash complete all as specified and directed

M&L for complete removal of existing treatment on old decorated surface of wall and applying two coats of oil emulsion distemper white/coloured over one coat of birla wall care based putty (where it is required) complete all as specified and directed. Note:- Putty shall be measured and paid seperately.

M&L for preparation of old decorated surfaces of wall including brooming, washing, rubbing scraping down with complete removal Smoke spot, moss, efflorescent salts, trading oil, grasy spots and stopping nails marks and applying one coat of white wash on walls complete all as specified and directed.

S&F 1.25mm thick mild steel, plain, black sheet in hearths; covering to door shutters; covering to door chowkats (frames); chullah hoods; water tanks; water troughs; ducts; urinal troughs and funnels, etc. cut to size edges beaded if directed, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel members, etc., with plain 40 mm lap joints or welded/riveted seams including bending, turning up,mitred angles, stopped ends, outlets, etc. as required complete all as specified and directed.

Cutting holes in exc half brick but not exc one brick walls built in cement mortar or cement lime mortar and stone walls built in lime mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required complete all as specified and directed.

ram prashad chotelal batham (BID ID -3399273)

Sudarshan Associates (BID ID -3399499)

S.S. Engineers (BID ID -3406975)