PROVN OF 02 X URINAL PT AT HQ INF DEF AND EMP COY AND OTHER SANCTIONED WORKS IN THE AREA OF AGE B/R-II UNDER GE PANAGARH

Amount

Demolition of cement concrete (un-reinforced) of any description and in any position not otherwise specifically provided complete all as specified and directed.

M&L for 25mm thick PCC 1:2:4 type B-0 (using 12.50mm graded crushed stone aggregate) as in roof padding, finished fair and even without using extra cement from roof surfaces complete all as specified and directed.

M&L for rendering 10 mm thick on fair faces on roof surfaces of concrete surfaces in CM (1:4) complete all as specified and directed using waterproofing compound. Note: Water proofing compound will be paid seperately.

M&L for preparation new surfaces or roof and apply two coats of polyurethene (PU) acrylic based water proofing liquid compound over & including one coat of self priming @ one litre oer ten sqm with reinforcing fabric sheet as per manufactures instruction to stop leakage/ seepage from roof/ wall complete all as specified and directed by the Engr-in-charge Note:- (i) As per description of these item minimum two coats of Polyurethene (PU) acrylic based water proofing liquid compound over one coat of primer shall be carried out by as per manufacturer instruction. Please note no price adjustment shall be made, if as per manufacturer instructions more coats of polyurethene (PU) acrylic based water proofing liquid compound & primer are required for roof treatment. ii) Quoted rate shall be deemed to be included for work in buiding/ structure of any height

M&L for rendering 15mm thick in on fair faces of brick work or concrete surfaces finished even and fair on walls in CM (1:4), using waterproofing compound including taking down cement plaster from brick walls or concrete surfaces including raking out joints, hacking out for key, scrubbing down with water complete all as specified and directed. Note: Water proofing compound will be paid seperately.

M&L for rendering 5mm thick in CM (1:3) as on brick work or concrete surface fair and even smooth using extra cement on concrete surface of ceilings including taking down cement plaster from brick walls or concrete surfaces including raking out joints, hacking out for key, scrubbing down with water complete all as specified. Note: Water proofing compound will be paid seperately.

M&L for complete removal of existing surface preparation of old plastered surface of wall for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old surfaces complete all as specified and directed. (Make: M/s Apex Ultima of Asian/ Weather Coat all guard of Berger/Xtra Tough of Shalimar).

M&L for 75 mm thick PCC 1:3:6 type C-1 (using 20 mm graded stone aggregate) in plinth protection and paving finished even and smooth with out using extra cement complete all as specified and directed

M&L for PCC 1:3:6 type C1 (using 20mm garded stone aggregate) as in surface channel complete all as specified and directed

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc complete all as specified and directed

Supply only water proofing compound (liquid admixture) complete all as specified and directed. (Makes : Pidilite Industries/ Impermo/Snowcem India Ltd/Sika)

Demolition of cement concrete is reinforced (reinforcement cut as required to facilitate demolition) roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work complete all as specified and directed

M&L for reinforced cement concrete, M-25 (Design Mix) using 20 mm graded stone aggregates as in Chajjas, lintels and the like complete all as specified and directed

M&L for reinforced cement concrete, M-25 (Design Mix), using 20 mm graded stone aggregates as in Fins, fascias, louvres, parapets, and railings exc. 60cm in height, newels, balustrade, and the like complete all as specified and directed

Formwork to chullah hoods, chajjas, troughs and similar items including edges for fair finished surfaces complete all as specified and directed

Formwork to fins, louvers, fascia and similar items including edges for fair finished surfaces complete all as specified and directed

S&F Mild steel TMT bars 6 to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed

M&L for cement concrete in roof kerbs or mud stops, rounded or chamfered on edges in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, including necessary formwork, all as directed by Engr-in-Charge.

Rendering 5 mm thick on fair faces of concrete surfaces, finished even and smooth on ceiling/chajja/pillar in cement mortar (1:3), on concrete surface even and smooth without using extra cement complete all as specified and as directed.

M&L for preparation of new plastered surfaces and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed. (Make: M/s Apex Ultima of Asian/ Weather Coat all guard of Berger/Xtra Tough of Shalimar)

Excavating over areas, n.exc 1.5 m deep and getting out in soft loose soil complete all as specified and directed

M&L for 200 mm thick Kankar or laterite, spread, rolled and consolidated to gradient and camber required complete all as specified and directed.

M&L for broken stone hardcore of guage n.exc 63mm, deposited, spread and levelled in layers n.exc. 15cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for 100mm thick PCC 1:4:8 type D2 (using 40mm graded crushed stone aggregate) as in hardstanding laid in panels with and including use and waste of formwork and to divide the area in panels and finishing the surface even and fair complete all as specified and directed.

M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

M&L for machine pressed pre-polished coloured precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with mixture of grey cement and pigment complete all as specified and directed.

M&L for cement concrete,1:2:4, type B1 (using 20mm graded stone aggregate) as in bed block, coping, lintel upto 1.50 m span, cills, kerbs etc complete all as specified and directed.

Removing excavated soil n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and directed.

M&L for moorum/red bajri filling in floors or pavings, laid in layers n.exc 15 cm thick, spread, levelled and rammed including wateing complete all as specified and directed.

Surface excavation n.exc 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil, complete all as specified and as directed.

Excavation in trenches n. exc 1.5m wide and n. exc 1.5 m in depth; for foundation, etc or for shafts, wells, cesspits, manholes, pier holes etc n. exc 10 sqm on plan and n. exc 1.5m in depth and getting out in soft/loose soil, complete all as specified and as specified.

Excavation in trenches n. exc 1.5m wide and n. exc 1.5 m in depth; for foundation, etc or for shafts, wells, cesspits, manholes, pier holes etc, exc 10 sqm on plan and depth exc 1.5m and exc 3.0 m and getting out in soft/loose soil, complete all as specified and as specified.

M&L for hardcore of broken stone or boulder of gauge n. exc 63mm, deposited, spread and levelled in layers n. exc 15cm thick, watered and rammed to a true surface, complete all as specified and as directed.

M&L for cement concrete type D2 1:4:8 (40mm graded aggregate) in foundations, filling and mass concrete, complete all as specified and as directed.

M&L for RCC (M-25) using 20mm graded stone aggregate, design mix in foundations, footings, foundation beams, plinth beams, bases of columns and mass concrete, complete all as specified and as directed.

All as per item No 35.00 mentioned above but in columns, complete all as specified and as directed.

All as per item No 35.00 mentioned above but in beams and lintels, complete all as specified and as directed.

All as per item No 35.00 mentioned above but in slabs supported on walls, beams and columns, in roofs and in shelves and the like, complete all as specified and as directed.

M&L for use and waste of formwork to sides of footing and plinth beams finished fair and rough, complete all as specified and as directed

All as per item No 39.00 mentioned above but for columns, complete all as specified and as directed.

All as per item No 39.00 mentioned above but for chajja, complete all as specified and as directed.

All as per item No 39.00 mentioned above but for sides and soffit of beams and lintels, complete all as specified and as directed.

All as per item No 39.00 mentioned above but for soffits of slab, complete all as specified and as directed.

All as per item No 39.00 mentioned above but for side of slab exc 10cm but n.exc 20 cm thick, complete all as specified and as directed.

M&L for cement concrete type C2 1:3:6 (using 40 mm graded stone aggregate) 75 mm thick as in plinth protection finished even and smooth without using extra cement, complete all as specified and as directed.

Returning, filling in including spreading, levelling, watering and well ramming in layers n.exc 25cm in soft/loose soil, complete all as specified and as directed.

M&L for brick work with fly ash bricks old size, straight or curved on plan exc 6 m mean radius, built in CM (1:6) complete all as specified and as directed.

M&L for brick work with fly ash bricks old size, straight or curved on plan exc 6 m mean radius, in half brick walls, built in CM (1:4) complete all as specified and as directed.

M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed

M&L for Mild steel TMT bars 5mm dia and over upto and including 10mm dia, as in stirrups, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed

M&L for rendering 15mm thick on fair faces of brick work or concret surfaces in CM (1:4) finished even and smooth without using extra cement, complete all as specified and as directed.

M&L for rendering 15 mm thick on other than fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement, on walls in CM (1:6) complete all as specified and as directed.

M&L for rendering 5mm thick on fair faces of ceiling/ chajja concrete surface in CM (1:3) complete all as specified and as directed.

M&L for preparation of newly plastered wall surfaces and applying three coat of white wash complete all as specified and as directed.

M&L for preparation of newly plastered ceiling surfaces and applying three coat of white wash complete all as specified and as directed.

S&F Solid PVC door frame of size 50mm x 47 mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specification and drawing, complete all as specified and as directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing, all as specified and as directed.

S&F Factory made steel ventilator with centre hung shutters, dovetailed, or welded including pintol hinges etc as shown with fixed type including one shop coat of red oxide zinc chrome primer complete all as specified and as directed.

S&F 100 mm butt hinges medium weight cold rolled mild steel, complete all a specified and as directed.

S&F aluminium anodised 150mm barrel tower bolts of extruded section, all as specified and as directed.

S&F 150 mm aluminium alloy handles, fabricated type, anodised, all as specified and as directed.

M&L for glazed ceramic colour joint free tiles in vertical surface 350x250x7mm thick set and jointed in neat cement slurry over 10mm thick 1:4 cement mortar plaster and pointed in coloured cement to match, all as specified and as directed. Note: Design, shade and pattern of fixing of tiles shall be as directed and approved by GE

M&L Non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of area tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors laid over 15mm thick 1:6 CM screed bed etc set and jointed in neat cement slurry and pointed in white or coloured cement to match, all as specified and as directed. Note: Design, shade and pattern of fixing of tiles shall be as directed and approved by GE

M&L for cement concrete type B0 (1:2:4) using 12.5 mm graded stone aggregate 25mm thick as in floors for receiving screed bed of floor tiling complete all as specified and as directed.

M&L for preparation of new or previously untreated steel surface and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and as directed.

S&F 3mm thick figured glass pin headed type and glazing with oil putty in square n.exc 0.5 sqm in each plane, all as specified and as directed.

S&F Stop valves 15mm dia CP fancy type, screwed down high pressure, with crutch or butterfly handle, screwed with both ends for iron pipe or for unions and fixed complete all as specified and as directed.

S&F PVC (SWR) 110mm dia pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.

M&L for steel tubes 15 mm dia bore 'medium' grade with all fitting, laid in trenches or wall complete all as specified and as directed.

M&L for PVC (SWR) floor trap 75mm dia plain with grating including jointing with solvent cement etc complete all as specified and as directed.

S&F vitreous China wash basin white flat back size 580x450 mm including cutting for pinning in ends of brackets, complete all as specified and as directed.

S&F 15mm bore pillar taps cast copper alloy, with capstan heads, chromium plated, screwed down, fancy type high pressure with or without lettered 'HOT' or 'COLD' with long screwed sunk and fly nuts complete all as specified and as directed.

S&F steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and as directed.

S&F Vitreous china urinal, half stall type, white (excluding flushing cistern, flush pipe) including urinal spreader if PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60 gms) and including waste pipe complete all as specified and as directed.

S&F tubular towel rail, 20 mm dia D type, brass chromium plated, 60 cm long between flanges complete all as specified and as directed.

Supply only Integral Water proofing compound complete all as specified and directed. (Make : Pidilite Industries/ Impermo/Snowcem India Ltd/Sika)

S&F PVC connection pipe 15mm size 600mm long with chromium plated brass coupling on both ends suitable for 15 mm bore steel tubing complete all as specified and as directed.

E/M PORTION S&F LED flood light 70 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp complete all as specified and as directed. Note: Mounting angle, clamp, bolts and nuts etc deemed to be unit rate.

Supply and passing through steel tubler pole/service connection, 1100 volts grade multicore round insulated copper conductor and sheathed flexible cable, multistranded, three core of nominal cross sectonal area 1.50 Sqmm complete all as specified and as directed.

Supply and laying for cable in trenches or passing through pipe, XLPE insulated, heavy duty, galvanised steel strip or wire armoured electric LT cable with stranded aluminium conductor for 1100 volts grade cross sectional area 10 sqmm 4 core complete all as specified and as directed.

Excavating in trenches n.exc 1.50 mtr wide and n.exc 1.50 mtr in depth, getting out in Soft /loose soil, complete all as specified and as directed.

M&L for sand cushioning (dry) in trenches for protection of UG Cables (below, above and around the UG Cable laid in trenches) of 230mm Spread thickness and consolidated (punned) upto 180mm thickness, complete all as specified and as directed. (Note : For the purpose of Payment, Punned thickness of Sand Cushioning only shall be Measured and Paid ).

M&L for fly ash bricks locally available laid dry width wise across the line of cable in trenches for protection of UG cable, complete all as specified and as directed.

Supply and fixing/laying 40mm bore, steel tubings, galvanised, light grade with all fitting laid across road, in trenches or across PCC drain or along electric pole or floor/wall etc for protection of cable complete all as specified and as directed.

Steel tubular swaged poles complete with cast iron base plate, finial taper plug, bolts, nuts & screws as specified type 410 SP-22 (8.5 metres long) incl bracket for fixing of light complete all as specified & directed.

Labour only for Horizontal Boring for Passing Protection Pipe up to 80mm Bore (dia), under Road /Foot Path, n.exc 10.00 mtr in a Single Length, complete all as specified and as directed. Note : Pipe to be measured separately.

M&L for PCC 1:3:6 type C2 (using 40 mm graded stone aggregate) as in foundation for pole etc complete all as specified and as directed.

M&L for PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) as in coping for pole including form work and finishing the surfaces even and smooth etc complete all as specified and as directed.

S&F Cable Junction Box 200X160X98mm in size, made out of thermoplastic, having IP 65 protection for outdoor installation fixed with 4 way bakelite cable terminals including 03 Nos polymide gland with check nut (M-32 -02 No & M-25 -01 No) fixed on poles with Aluminium clamps of size 25x3mm, nuts, bolts, washers etc. including taking out of old unserviceable cable junction box complete all as specified and as directed. Make : Cat No. K-9250 of HENSEL or equivalent model in SPELSBERG/Sintex.

S&F 40 mm High density polyethylene pipe (HDPE) of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc. complete all as specified and directed .

M&L for earthing complete with MS galvanized plate of size 60cmx60cmx6mm as earth electrode , buried directly in ground (earth pit not less than 2.25 mtrs deep below ground level) with top edge of the plate not less than 1.5 mtrs below normal ground level, connected to galvanised iron strip 32×6mm as earthing lead by means of bolts, nuts, check nuts and washers of galvanised iron/welding or steel all as shown in electrical plate No 3 in SSR Part I of 2009 connected to earthing test point all as specified complete with excavation & earth work, PCC pit with 50mm thick RCC cover/CI /MS cover having suitable handle (10mm MS Rod) 20mm dia GI medium grade watering pipe with GI funnel with wire mesh 40mm bore GI pipe medium grade ISI marked) for protection of earth lead conductor and testing on completion complete all as specified and as directed by Engr-in-Charge.

M&L for point wiring for light point/ fan point, one light/fan/exhaust fan point controlled by one, one way switch using 1.5 sqmm nominal cross sectional area multistranded copper conductor, PVC insulated unsheathed FRLSH cables in and including 20 mm dia or higher size PVC concealed conduits and fittings of medium grade, including pressed steel terminal switch boxes/ modular, 3 mm thick bakelite sheet top cover (ISI Marked) fitted with chromium plated brass screws & washers and 1.5 sqmm nominal cross sectioanl area multistranded copper conductor FRLSH PVC insulated unsheathed earth wire and connecting to earth dolly and brass screws, washers etc. complete all as specified and directed. (Note: Quoted rate deemed to be included for necessary chasing/cutting and making good the surface)

S&F ceiling rose surface bakelite 65 mm x 50 mm two to three terminal suitable for 230 Volts AC 6 Amps complete all as specified and directed.

S&F switch piano flush type, single pole, 5/6 Amps, one way complete all as specified and directed.

S&F LED light fitting 1 x 20 watt box type with same make LED tube rod side connection AC decorative box type 4' long wih driver, holder including LED tube connecting up with complete all accessories and connection from ceiling rose with twin core twisted flexible copper conductor cable with suitable size and earthing complete all as specified and directed. Make : Bajaj/CG/Havells/Jaquar/Philips

S&F wall LED security light fittings 25 watt, 230 volts, minimum lumn output 100 lumen/watt, made up of pressure dia cast housing with prismatic polycarbonate difuser and industrial LED with secondary optic and IP-65/66 including neccessary connection complete with all accessories including connected with 3 core copper cable of suitable 1.5 sqmm size complete allas specified and directed. Make : Bajaj/CG/Havells/Jaquar/Philips

S&F epoxy powder coated sheet metal enclosure for DBs, double door, Single pole and neutral, 2 ways with mounting fitted with bus bar, DIN channel, neutral link and incoming contact complete all as directed. Make : ABB/Legrand/Hager/Schneider

S&F MCB SPN 6-32 Amps, 'C' series 10kA, 240 Volts and to be housed in DBs complete including necessry connection all as specified and directed. Make : ABB/Legrand/Hager/Schneider

M&L for earthing complete with galvanised mild steel earth plate electrode 600x600x6.0mm thick, burried directly in ground to a depth not less than 2.25 metres deep below ground level with top edge of earth plate not less than 1.5 metre below normal ground level surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15 cm all around the plate, using GI wire 4 mm dia as earth strip electrode bolted or rivetted to earth plate at one end and connected to equipments at another end, GI earth strip encased in and including 40 mm dia GI 'light grade' pipe from upper end of earth plate upto equipments,20 dia bore GI pipe 'light grade' as water pipe from earth chamber to upper edge of earth plate, Test point , GI funnel with wire mesh fixed on water pipe and PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in pit chamber and RCC pit cover 50mm thick precast RCC 1:2:4 type B-1, duly reinforced with MS round bars 6mm dia @ 100 c/c both ways with 10mm dia MS round bar as in lifting handles, excavation, earth work including laying the GI pipe concealed in floor/wall all as described in electric plate of SSR Part I complete all as specified and directed and testing on completion.

Supply, laying, connecting, testing and commissioning of LT under ground cable XLPE insulated, aarmoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 10 sqmm 2 core complete all as specified and directed Note:-(i) Excavation, sand cushioning, brick will be measured and paid separtely.

S&F pipes galvanized, 50 mm bore “light grade”, supplied and laid complete including necessary fittings such as tees, bends, elbows, sockets, reducers etc as per site requirement or specified.

S&F Pipes galvanized, 20 mm bore “Medium grade”, supplied and laid complete including necessary fittings such as tees, bends, elbows, sockets, reducers etc as per site requirement or specified omplete all as specified and directed.

S&F gun metal, gate valve, 20 mm dia with iron wheel head, screwed both ends for iron pipe and fix complete all as specified and directed.

S&F 500 Ltr capacity Rotational/moulded polyethylene water tank (Cylindrical vertical with closed top, minimum three layer) hoisted including dismantling & fixed in position all as specified directed Make : Vectus/Sintex/Prayag

S&F high pressure PTMT float valve with epoxy coated alluminium rod and high density polythelene ball screwed for iron pipe 20 mm dia with fly nut complete all as specified and directed.

M&L for cutting existing steel tubing for alternation or addition of size 40 to 50 mm dia GI pipe complete all as specified and directed.

ROY ENTERPRISE

M/s Raj Kumar Chopra

Goswami Enterprise

NATIONAL CONSTRUCTION CO

ANSH CONSTRUCTION

M/S DYNAMIC INDIA (PROJECT) CONSTRUCTION

S.P.S. SUPPLIERS