Repair and maintenance of Type-I qtrs block No. 01 for residential buildings at 104 RAF CRPF, Aligarh, UP

Amount

Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing:

Fly proof stainless steel grade 304 wire gauge with 0.5 mm dia. wire and 1.4mm wide aperture with matching wood beading

Providing and fixing 25 mm thick shutters for cup board etc. Panelled or panelled & glazed shutters. Second class teak wood including ISI marked anodised aluminium butt hinges with necessary screws

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws

Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete. 250x16 mm

Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete. 200x10 mm

Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. Complete. 125 mm

Providing and fixing factory made PVC door shutter made of solid foam PVC profiles ofthikness 5mm and 15mm at edgesintegrallyextrudedforverticalstyleandhorizontal(top/bottom/ lock) rails of minimum cross section of 70mmx28mm, of shape and design asper manufacturer’s specifications having homogenous fine cellular structure and smoothintegral outer skin, inserted with G.I. ‘C’ section/ rectangular tube profile of minimum 0.30mmthickness with 120 gsm coating as stiffeners as per manufacturer’s specifications Mitred cutjoints for styles and rails provided with telescopic polymeric ‘L’ corners are jointed togetherusing solvent adhesive and strenghtened with fully threaded stainless steel screws (ofrequired size) through reinforced stiffener with paneling of specified solid foam PVC board/high pressure laminate of required thickness and of approved design and shade (matchingthe styles and rails), secured within styles and rails with specially designed solid foam PVCmoulded beadings of required size using PVC solvent adhesive/ cement. The finished doorshutter including SS hardware, 1 no. ss sliding bolt 200 x 10mm, 1 no. SS tower bolt 200 x10mm and 2 nos. SS handles 125mm, shall be fixed to frame with 3 nos. stainless steel hingesof minimum size 100x58x1.9mm and stainless steel screws of required size complete as perdirection of the Engineer-in-Charge. (Cost of above hardware is inclusive in rates). 5mm thick solid foam PVC panel of required size with moulded/ extruded beading of appropriatedesign shape and size as per manufacturer’s specifications ( to secure the panel insert tightin place within the style and rails of shutter) matching the colour and shade of shutter frame. Non decorative type.

Providing and fixing fly proof stainless steel grade 304 wire gauge, to windows and clerestorywindows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.50 mm all complete. With 12 mm mild steel U beading

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. Complete

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade. One or more coats on old work

Distempering with 1st quality acrylic distemper (ready made) having VOC content less than 50 gm per ltr.of approved manufacturer and of required shade and colour complete. as per manufacturer's specification. One or more coats on old work

Finishing walls with Acrylic Smooth exterior paint of required shade. Old work (One or more coat applied @ 0.90 ltr/ 10 sqm) on existing cement paint surface

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. With cement mortar 1:4 (1 cement : 4 fine sand)

Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm)

Replacing sand stone slabs in roofing, laid in cement mortar 1:4 (1 cement : 4 coarse sand),including necessary repairs and cement pointing with same mortar complete, includingdisposal of rubbish to dumping ground, all complete as per direction of Engineer-in-Charge. Red/ white sand stone slabs 30 to 50 mm thick.

Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking ofuseful materials near the site and disposal of unserviceable materials within 50 metres lead.

Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. 10 litre capacity - White

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe. 32 mm dia

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms.

Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet. 150 mm diameter

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS :12701 marked, with cover and suitable locking arrangement and making necessary holesfor inlet, outlet and overflow pipes but without fittings and the base support for tank. Cost for 500 litre

Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. 15 mm nominal bore

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 15 mm nominal bore

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931. 15 mm nominal bore

Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour. 15 mm nominal bore with 45 cm length

Vibrant Enterprises (BID ID -3267458)

meera enterprises (BID ID -3267706)