Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹43.8 LAccepted-AOC | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹46.3 L+₹1.4 L (3.05%)Rejected-Finance C O M S MITHUN ENTERPRISES MINNIEBAY JUNCTION PORT BLAIR 744103 | PORT BLAIR | SOUTH ANDAMANS | ANDAMAN AND NICOBAR ISLANDS | 744103 | L2 | Rejected-Finance Not being L1 | |
| 3 | L3₹48.0 L+₹3.0 L (6.70%)Rejected-Finance | L3 | Rejected-Finance Not being L1 |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
12 Dec 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Minniebay
Junglighat PO Port Blair Andaman and Nicobar Islands
COMPREHENSIVE MAINT AND CERTAIN B/R REPAIRS TO OTM AND MD ACCN AT SRINAGAR COLONY AND MINNIEBAY AREA UNDER AGE B/R II AT GE MINNIEBAY, PORT BLAIR
2022_MES_558695_2
8179/E8
Open Tender
Civil Works
Item Rate
270 days
GE Minniebay
Please refer Tender documents.
10 documents required · 10 mandatory
₹500
GE Minniebay
₹90,000
Yes
9 Feb 2023
22 Nov 2022
15 Dec 2022
22 Nov 2022
12 Dec 2022
29 Nov 2022
Amount
M&L for preparation of old surfaces of wall and applying one coat of oil emulsion distemper complete all as specified and as directed by Engr-in-Charge.
All as per item No 01 above but two coats of oil emulsion distemper complete all as specified and as directed by Engr-in-Charge.
All as per item No 01 above but as in ceiling complete all as specified and as directed by Engr-in-Charge.
M&L for complete removal of existing treatment on wall surfaces and applying one layer of 3mm thick wall care putty and making surface even and smooth complete all as specified and as directed by Engr-in-Charge.
M&L for preparation of old painted wooden surface and applying one coat of synthetic enamel paint of any description exc 10cm width or girth complete all as specified and as directed by Engr-in-Charge.
M&L for preparation of old painted steel surfaces over 10cm in width or girth and applying one coats of synthetic enamel paint complete all as specified and as directed by Engr-in-Charge.
M&L for preparation of old painted wall surfaces and applying one coat of exterior emulsion weather coat antifungal paint including scaffolding at any height complete all as specified and as directed by Engr-in-Charge.
M&L for preparation of old painted wall surfaces and applying two coats of exterior emulsion weather coat antifungal paint including scaffolding at any height complete all as specified and as directed by Engr-in-Charge.
M&L for preparation of old surfaces of wall and applying one coat of cement based paint complete all as specified and as directed by Engr-in-Charge.
M & L for cleaning the existing floor / concrete surfaces/Path by washing rubbing etc to remove caked mud/ grease etc and applying high pressure wall jet of 120 PSI or move for obtaining a clean surfaces free from algae /organic particles and applying one coat of weather resistant floor paint complete all as specified and as directed by Engr-in-Charge
M&L for taking down scrubs/vegetation growth from crevices in the building including applying suitable chemical herbicide @ suitable concentration and making good concrete surfaces using PCC 1:2:4 / CM 1:3 completely up to G+3 storey level with all safety equipment's complete all as specified and as directed by Engr-in-Charge
Taking down Cement Plaster of any description on brick or stone walls or concrete surfaces including raking out joints, hacking for key complete all as specified and as directed by Engr-in-Charge
M & L for rendering 5 mm thick in cement mortar 1:4 over a backing coat of 10mm thick in CM 1:6 (Total 15 mm thick) on concrete or block masonry surfaces including mixing water proofing compound on top layer as per manufacturers instructions and finishing the top surface even and fair complete all as specified and as directed by Engr-in-Charge. Note: Water proofing compound shall be measured and paid separately under relevant item of this schedule as "Supply only"
M&L for rendering 10mm thick plaster in CM (1:6) on brick/block or concrete surfaces finished even & smooth complete all as specified and as directed by Engr-in-Charge
M&L for rendering 5mm thick ceiling plaster in CM (1:3) on concrete surfaces finished even & smooth complete all as specified and as directed by Engr-in-Charge
Supply only water proofing compound ISI marked complete all as specified and as directed by Engr-in-Charge
M&L for preparation of newly plastered wall surface and applying two coats of oil bound distemper over a coat of primer complete all as specified and as directed by Engr-in-Charge
M&L for preparation of newly plastered wall surface and applying two coats of cement based paint over a coat of chalk whitening complete all as specified and as directed by Engr-in-Charge
M&L for preparation of newly plastered wall surface and applying one coat of exterior emulsion weather coat antifungal paint over a coat of exterior primer including scaffolding at any height and safety precautions complete all as specified and as directed by Engr-in-Charge
M&L for preparation of newly plastered ceiling surface and applying two coats of oil bound distemper over a coat of primer including scaffolding complete all as specified and as directed by Engr-in-Charge
M&L for preparation of new wood/wood based surfaces of exc. 10cm width or girth of any description and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed by Engr-in-Charge.
M & L for preparation of new steel or iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed by Engr-in-Charge
M & L for preparation of wood surface and wood based materials, steel and iron work, new or old, of any description and girth, not otherwise described, and treated with tar or coal tar black paint treating ends of posts, backs of chowkats, etc., area treated exc 0.14 sqm, but n exc 0.5 sqm each complete all as specified and as directed by Engr-in-Charge.
All as per item No 23.00 above but treating small articles such as stop, covers, gully gratings, holdfasts, ends of posts, backs of chowkats, etc. of area not exceeding 0.1 sqm each complete all as specified and as directed by Engr-in-Charge.
Dismantling floor, hearth or wall tiling incl cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed by Engr-in-Charge.
Dismantling of stone slab of any description including cement mortar bedding but not backing complete all as specified and as directed by Engr-in-Charge.
M&L for vitrified coloured ceramic tiles 10 mm thick (Square/ rectangular) area of each tiles not exc 0.36 Sqm in floors set and jointed in neat cement slurry and pointed in white/coloured cement to match over and including 15mm thk screed bed or bedding layer in CM(1:6) complete all as specified and as directed by Engr-in-Charge.
All as per item No 27.00 above but on dado / skirting over 10mm thick backing coat in CM (1:4) complete all as specified and as directed by Engr-in-Charge.
M&L non skid ceramic coloured tiles 7 to 8mm thick (Square or rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18sqm, in floor etc and jointed in neat cement slurry and pointed in white cement or coloured cement to match the shade of tile over and including 15mm thick screed bed or bedding layer in CM(1:6) complete all as specified and as directed by Engr-in-Charge.
All as per item 29 above but as in vertical surfaces/skirting over and including 10mm thick backing coat in CM (1:3) complete all as specified and as directed by Engr-in-Charge.
M & L for Non Skid Ceramic Tiles, Coloured, of size exceeding 0.06 Sq.m and not exceeding 0.11 Sq.m, 7 mm to 8 mm thick [Square or Rectangular] as in Floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer in CM (1:6) complete all as specified and as directed by Engr-in-Charge.
M&L for glazed ceramic coloured tiles of size 300x200x7mm thick for work on vertical surface such as skirting, dado, set & jointed neat in cement slurry and pointed in white or coloured cement to match over and including 10mm thick backing coat in CM (1:3) complete all as specified and as directed by Engr-in-Charge.
M&L for glazed digital ceramic coloured tiles in vertical surfaces 350 x 250 x 7 mm /450 x 350 x7 to 8mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick backing coat in CM (1:3) complete all as specified and as directed by Engr-in-Charge.
M & L for coloured chequered cement concrete tiles 30 cm x 30cm x 25 mm thick, set and jointed neat cement slurry and pointed with coloured or grey cement match with pigment, over and including 20 mm thick screed bed or bedding layer in CM( 1:6) etc. complete all as specified.
M & L for 300 x 300 x 9mm thick coloured heavy duty vitrified exterior chequered tiles as in floor/wall set and jointed in cement slurry and pointed in coloured cement to match laid over 15mm thick cement mortar in CM 1:6 complete all as specified and as directed by Engr-in-Charge.
M&L for 20mm thick granite (of any type ) work (table rubbed mirror polished) edges rounded chamfered and bull nosed in steps, joints, cills, cooking platform & likes over screed bed incl pointing in white cement with admixture of pigment to match with shade of granite stone including grinding and polishing , rounding the edges over and including 15mm thick screed bed or bedding layer in CM (1:6) complete all as specified and as directed by Engr-in-Charge.
Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed by Engr-in-Charge.
M & L for 25 mm thick, PCC 1:2:4, Type B-0 (nominal mix) using 12.5mm graded aggregate as in floor, Sub bases, levelling coarse, sunken floor etc similar work finished even and fair complete all as specified and as directed by Engr-in-Charge.
M& L for 75 mm thick PCC 1:3:6 Type C2 (nominal mix) using 40 mm graded stone aggregate in sub floor , sub bases, plinth protection , floors and pavings and corners filled with mastic filling complete all as specified and as directed by Engr-in-Charge.
M&L for PCC 1:4:8 type D2 (nominal mix) using 40 mm graded stone aggregate as in foundations, filling and mass concrete complete all as specified and as directed by Engr-in-Charge.
Demolition of Precast concrete articles and precast concrete block walling any description any position complete all as specified and as directed by Engr-in-Charge.
M&L for precast cement concrete block masonry with solid block, exc 10cm in width in PCC type C-1, 1:3:6 using 20mm graded stone aggregate and set in CM (1:6) complete all as specified and as directed by Engr-in-Charge.
All as per item No 42.00 above but n.exc 10cm thick and set in CM 1:4 complete all as specified and as directed by Engr-in-Charge.
M&L for taking up or down 15/20mm bore steel tubing and connections including its accessories such as bends, Tee, junctions etc complete all as specified and as directed by Engr-in-Charge.
Taking up or down 25/32mm bore steel tubing and connections including its accessories such as bends, Tee, junctions etc complete all as specified and as directed by Engr-in-Charge.
S&F CPVC pipes SDR 11 & Plain CPVC fittings on walls/ceiling or laying in floors with outer dia 20mm with proper clamping arrangements complete all as specified and as directed by Engr-in-Charge.
S&F CPVC pipes SDR 11 & Plain CPVC fittings on walls/ceiling or laying in floors with outer dia 25mm with proper clamping arrangements complete all as specified and as directed by Engr-in-Charge.
S&F CPVC pipes SDR 11 & Plain CPVC fittings on walls/ceiling or laying in floors with outer dia 32mm complete with proper clamping arrangements complete all as specified and as directed by Engr-in-Charge.
S&F CPVC brass threaded elbow 20mm outer dia complete all as specified and as directed by Engr-in-Charge.
S&F CPVC brass threaded Tee for 25 x 20mm outer dia complete all as specified and as directed by Engr-in-Charge.
S&F CPVC Brass threaded adopter (FTA/MTA) of 20mm outer dia complete all as specified and as directed by Engr-in-Charge.
S&F CPVC Brass threaded adopter (FTA/MTA) of 25mm outer dia complete all as specified and as directed by Engr-in-Charge.
S&F Tank adaptor for 32mm outer dia CPVC Pipe complete all as specified and as directed by Engr-in-Charge.
S&F CPVC Union for 32mm outer dia pipe complete all as specified and as directed by Engr-in-Charge.
S&F Ball valves for 25 OD CPVC pipes complete all as specified and as directed by Engr-in-Charge.
S&F Ball valves for 32 OD CPVC pipes complete all as specified and as directed by Engr-in-Charge.
Cutting chases in concrete block walls, pinning in, making good to facings where required and pointing in cement mortar 1:3 for concealed water tubing etc, and making good, cutting not exc 10 cm girth complete all as specified and as directed by Engr-in-Charge.
Fixing only in repairs Bib Cock/Stop Cock/wall mixers including cleaning, removing of blockages etc. of any type and size including replacement of brass spindle if required complete all as specified and as directed by Engr-in-Charge. Note : Brass spindle shall be measured and paid respectively under relevant item of this schedule as 'Supply only'
Supply only brass spindles for Bib Cocks/Stop Cocks/Wall/wall mixers etc complete all as specified and as directed by Engr-in-Charge.
S & F in repairs Bib Taps, cast copper alloy heavy duty, 15 mm dia, Chromium Plated, long body Fancy type screwed down for iron pipe and fixed etc complete all as specified and as directed by Engr-in-Charge.
S&F in repairs Pillar taps, cast copper alloy chromium plated, fancy type 15/20mm bore, screwed down, high pressure with long screwed shanks and fly nut complete all as specified and as directed by Engr-in-Charge.
S & F in repairs 15 mm dia bore cast copper alloy chromium plated angle cock/stop cock fancy type with long shank and cup and fixed, complete all as specified and as directed by Engr-in-Charge.
S & F in repairs 15 mm dia bore cast copper alloy chromium plated concealed type stop cock fancy type with long shank and cup and fixed, complete all as specified and as directed by Engr-in-Charge.
S & F in repairs gun metal gate valve 20mm screwed down high pressure with crutch or butterfly handles screwed both ends complete all as specified and as directed by Engr-in-Charge.
S&F in repair sinks with drainage board made of stainless steel 1mm thick for kitchen with plug washers, waste pipe and coupling including bedding in cement mortar, two Nos of iron fixing bracket of required size and connecting union to pipe over all size 915mm x 460mm bowl size 410mm x 330 mm x 160mm complete all as specified and as directed by Engr-in-Charge.
S & F in repairs Vitreous china ware wash hand basin, white, flat back of size 630x450mm including 32mm brass chromium plated waste fittings with rings including CI Brackets, cutting for and pinning in ends of brackets or erecting strand, etc complete all as specified and as directed by Engr-in-Charge.
S&F in repair vitreous china wash down water closet pan (pedestal pattern) of size 540x375x415mm coloured (including two Nos fixing bolts incl PVC seat cover but excluding flushing cistern and flush pipe) complete including making good to floor with and including fixing of P or S trap complete all as specified and as directed by Engr-in-Charge.
S & F Vitreous China squatting pan, `Orissa` pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern) complete all as specified and as directed by Engr-in-Charge.
S&F in repair Vitreous China urinals, half stall type complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, pointing around urinal back in cement, including 32mm waste pipe and CP urinal spreader complete all as specified and as directed by Engr-in-Charge.
Supply and fixing in repair 10 litre capacity PVC low level valve less symphonic action type flushing cistern, white, with inlet, ball valve, float and handle including brackets, and bends complete all as specified and as directed by Engr-in-Charge.
S&F in repairs PVC water closet seat cover (any description), closed pattern and mild steel chromium plated or aluminised hinging device complete all as specified and as directed by Engr-in-Charge.
S&F in repair 32/40mm CP Waste coupling for Sink/WHB any type proper leak-proof complete all as specified and as directed by Engr-in-Charge.
S&F in repairs PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and as directed by Engr-in-Charge.
M&L for minor repairs to PVC Flushing Cistern by replacing minor parts like flushing knob, float, screws, washers including connecting to existing water supply line and water closet pan complete all as specified and as directed by Engr-in-Charge. Note : Cost of spares to be replaced shall be included in the quoted rate
S&F in repairs stainless steel plate rack of size 900x 750 x 250 mm made of 1mm thick stainless steel complete all as specified and as directed by Engr-in-Charge.
S & F in repair Health faucet (ABS body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed by Engr-in-Charge.
S&F in repairs brass chromium plated shower rose with 150mm long with CP shower arm 125 mm size revolving type suitable for 15 mm bore pipes complete all as specified and as directed by Engr-in-Charge.
S&F in repairs sheet glass shelf assembly consisting of 5.5mm thick sheet glass self assembly 12cm width with chromium plated guard and railing 60cm long complete all as specified and as directed by Engr-in-Charge.
S&F in repair soap dish, brass, chromium plated fixed to wall with brass chromium plated screw complete all as specified and as directed by Engr-in-Charge.
S&F in repair brass CP tubular Towel Rail 20 mm dia high quality 60 cm long between flanges ,D type fixing with necessary screws to wall complete all as specified and as directed by Engr-in-Charge.
S&F in repair waste pipe of dia 32/40mm suitable for WHB /sink etc complete all as specified and as directed by Engr-in-Charge.
S&F in repair 100 mm dia CP grating incl joints with solvent cement complete all as specified and as directed by Engr-in-Charge.
S&F in repairs 25mm dia aluminum anodised powder coated best quality curtain rails with fixing brackets in both ends complete all as specified and as directed by Engr-in-Charge.
S&F in repair decorative globes for curtain rails to be fixed at both end of curtain rails complete all as specified and as directed by Engr-in-Charge.
S&F in repair 20 mm PVC float valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe complete all as specified and as directed by Engr-in-Charge.
Taking down Chowkats or frame with shutters [without taking off shutter from the frame] not exceeding 1.5 Sqm each complete all as specified and as directed by Engr-in-Charge.
Taking down Chowkats or frame with shutters [without taking off shutter from the frame] exceeding 1.5 Sq.m but not exceeding 4.00 Sq.m each complete all as specified and as directed by Engr-in-Charge.
Taking down Shutters of any description n.exceeding 1.00 Sqm each complete all as specified and as directed by Engr-in-Charge.
Taking down Shutters of any description exceeding 1.00 Sq.m but not exceeding 2.00 Sq.m each complete all as specified and as directed by Engr-in-Charge.
Refixing Shutters of any description in same opening exceeding 1.00 Sq.m but not exceeding 2.00 Sq.m each complete all as specified and as directed.
Resecuring (or) Easing and Adjusting without taking down shutters of any description and any size complete all as specified and as directed by Engr-in-Charge.
S&F Plain, solid, straight chowkats and frames of 2nd class hard wood, framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and as directed by Engr-in-Charge.
S & F 35 mm thick, second class hard wood, plain framed panelled shutters [any numbers of panels] with panels of timber flat on both side [feather edged] or of veneered particle board, medium density, wood particle board with commercial face veneers or ply wood complete all as specified and as directed by Engr-in-Charge.
S&F 30mm thick Flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides complete all as specified and as directed by Engr-in-Charge.
S & F second class hard wood 35 mm thick glazed and skeleton shutters open rebated and prepared to receive glass, gauge etc divided in to squares with plain, chamfered or rounded, mitred and rebated sash bars fitted with cut and mitred beads for securing glass etc complete all as specified and as directed.
S&F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS Square tube in opening complete all as specified and as directed by Engr-in-Charge.
S & F Factory made solid panel door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel heaving a PVC sheet strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing complete all as specified and as directed by Engr-in-Charge.
S & F 200 mm long Aluminium anodised barrel tower bolts of extruded sections complete all as specified and as directed by Engr-in-Charge.
S & F in repair 200 mm long Aluminium anodised barrel tower bolts of extruded sections complete all as specified and as directed by Engr-in-Charge.
S&F 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections complete all as specified and as directed by Engr-in-Charge.
S&F in repair 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections complete all as specified and as directed by Engr-in-Charge.
S & F Aluminium anodised Handle, of extruded section Fabricated Type of size 150mm long complete all as specified and as directed by Engr-in-Charge.
S & F in repairs Aluminium anodised Handle, of extruded section Fabricated Type of size 150mm long complete all as specified and as directed by Engr-in-Charge.
S&F Stainless steel butt hinges 100mm size medium weight complete all as specified and as directed by Engr-in-Charge.
S&F in repair Stainless steel butt hinges 100mm size medium weight complete all as specified and as directed by Engr-in-Charge.
S & F Floor Door Stopper of size 100 mm of aluminium alloy body and tongue, anodised complete all as specified and as directed by Engr-in-Charge.
S&F repair 300mm MS ordinary rat tail spring (Helical door spring) including roller and roller plate complete all as specified and as directed by Engr-in-Charge.
S&F Anodised Aluminium frames or shutters for doors, partitions openable Windows and Ventilators and similar works with one or more rebates incl necessary fittings and fixture such as jointing cleats, glazing clips, rubber packings, screws, handles stainless steel adjustable friction stay hinges etc. as required fixed to aluminium frame complete all as specified and as directed by Engr-in-Charge. NOTE: (i) Unit rate quoted shall deemed to include cost of rubber beading, fittings such as handles, SS friction stay hinges and fixing of glass, wire cloth & Deco grill etc. (ii) Glass, wire cloth & grill shall be measured and paid separately as 'Supply only'
Supply only 4mm thick, Figured glass, pin head type in squares n exc 0.5 sqm each pane complete all as specified and as directed by Engr-in-Charge.
Supply only Aluminium anodised 'XPM' of size 3.00 x 1.5mm x 22 Gauge for mosquito proofing complete all as specified and as directed by Engr-in-Charge.
S&F in repair 5.5mm thick sheet glass ordinary quality in aluminum joinery in squares of area exc 0.50 sqm in each pane including necessary adjustments and re-securing complete all as specified and as directed by Engr-in-Charge.
S&F in repair aluminium alloy wire cloth , 0.45 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminiumm wire staples complete all as specified and as directed by Engr-in-Charge.
S&F in repair Aluminium anodised window and ventilator members for replacement of unserviceable members in window, ventilators etc complete all as specified and as directed by Engr-in-Charge.
S & F anodized aluminum door seals of 32mm (overall size) with standard 1mm thick aluminum sections and bottom brush and provision of counter sunk holes for screws etc complete all as specified and as directed by Engr-in-Charge.
S&F in repair for 18 mm thick HDF high quality boardings one side pre laminated (white) and other side plain to receive decorative laminates as in kitchen cabinet/shelves/wardrobe/wall panelling fixing with necessary small fitting as required as per manufacturers instructions complete all as specified and as directed by Engr-in-Charge.
S&F in repair heavy duty stainless steel telescopic channels for sliding arrangement of size 20" for drawers, cabinets and similar works with carrying capacity not less than 10 kg complete all as specified and as directed by Engr-in-Charge.
S&F Stainless steel auto closing heavy duty modular hinges for cupboard shutters complete all as specified and as directed by Engr-in-Charge.
S&F in repairs plywood 12 mm thick, medium density ,flat pressed, single layer type or three layer type with BWR type adhesive, fixed with screws to timber frame work including necessary beading etc on wall or any position complete all as specified and as directed by Engr-in-Charge.
S&F 100mm Extruded brass handles, fabricated type polished all complete all as specified and as directed by Engr-in-Charge.
S & F 75mm Butt hinges, extruded brass, with mild steel hinge pin, bright polished and fixed complete all as specified and as directed by Engr-in-Charge.
S & F Ball catches/Magnet catcher with 8mm dia steel ball, and brass body and striking plate including letting in and fixed with screws complete all as specified and as directed by Engr-in-Charge.
M&L for minor repair to aluminum joinery and making serviceable the same by means of adjustment, greasing as necessary etc complete all as specified and as directed by Engr-in-Charge.
S&F in repair 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or laid in trenches including necessary clamps etc to fixing on walls as required complete all as specified and as directed by Engr-in-Charge.
S&F in repair 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or laid in trenches including necessary clamps etc to fixing on walls as required complete all as specified and as directed by Engr-in-Charge.
S&F 110 mm bore PVC (SWR) bends of any radius complete all as specified and as directed by Engr-in-Charge..
S&F 75 mm bore PVC (SWR) bends of any radius complete all as specified and as directed by Engr-in-Charge..
S&F in repairs PVC (SWR) floor trap of any dia, plain with grating including jointing with solvent cement fixed in cement concrete complete all as specified and as directed by Engr-in-Charge. Note : PCC shall be measured and paid separately under relevant item of this schedule.
Material & labour for providing and injecting chemical emulsion for Post Constructional Ant termite Treatment along external wall where the apron is not provided using chemical emulsion at the rate of 7.5 litres per sq.m of the vertical surface of the sub-structure to a depth of 300mm including excavating channel along the wall and rodding etc. complete all as specified and directed and work shall be executed as per IS 6313 (Part-3) 2001 Para No 5.3.1.1 & 5.3.1.2 complete all as specified and as directed by Engr-in-Charge.
Material & labour for applying along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as specified and directed and work shall be executed as per IS 6313 (Part-3) 2001 Para No 5.3.1.1 & 5.3.1.2 complete all as specified and as directed by Engr-in-Charge.
Material & labour for treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors complete all as specified and directed and work shall be executed as per IS 6313 (Part-3) 2001 Para No 5.3.1.3 complete all as specified and as directed by Engr-in-Charge.
Material & labour for filling of voids in masonry using chemical emulsion one litre per hole, at 300mm intervals including drilling holes at 45 degree and replugging them with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floors complete all as specified and directed and work shall be executed as per IS 6313 (Part-3) 2001 Para No 5.3.1.5 complete all as specified and as directed by Engr-in-Charge.
Material & labour for applying at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same complete all as specified and directed and work shall be executed as per IS 6313 (Part-3) 2001 Para No 5.3.1.6, 5.3.2, 5.3.2.1 & 5.3.2.2 complete all as specified and as directed by Engr-in-Charge.
Note for Item No 130 to 134 : (a) Anti-termite treatment shall be got done through an approved specialist agency which is a member of Indian Pest control Association (IPCA) holding valid licence as per clause 13 of Insecticides Act 1968. and work to be executed as per IS 6313 (Part-3) 2001. IPCA cert shall be submitted before commecement of ATT work at site (b) Product for treatment should be approved from Central building institute of Roorkee or equivalent govt agency & chemicals Chloropyriophos emulsifiable concentrates conforming to IS 8944 -2005 shall be used as per concentration indicated in IS code and make shall be as specified in Particular Specification.
Dismantling plain or corrugated steel sheeting, any gauge,thickness,including nanital or similar pattern roof coverings complete all as specified and as directed by Engr-in-Charge.
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed by Engr-in-Charge.
S&F steel work in tubular roof trusses,trussed, purlins, rafters including special shaped washer etc complete using ERW or induction butt welded tubes confirming to I.S.1161-1979 grade st.-240 complete all as specified and as directed by Engr-in-Charge. (Note : Height of the bldg up to G+3 storey including necessary safety arrangements).
S & F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment confirming to Fe-410 W (Grade E-250) quality A complete all as specified and as directed by Engr-in-Charge. (Note : Height of the bldg up to G+3 storey including necessary safety arrangements)
S & F Mild steel screw bolts (machine made) 5 to 10 mm dia with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5cm but n.exc. 10 cm long complete all as specified and as directed by Engr-in-Charge. (Note : Height of the bldg up to G+3 storey including necessary safety arrangements)
S&F Pre-painted galvalume aluminium zinc coating corrugated steel sheet 0.50mm of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed by Engr-in-Charge. (Note : Height of the bldg up to G+3 storey including necessary safety arrangements)
S&F Pre-painted galvalume aluminium zinc coating plain steel sheet 0.50mm of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed by Engr-in-Charge. (Note : Height of the bldg up to G+3 storey including necessary safety arrangements)
S&F aluminium flat 25 X 6mm size as wind tie fixed with 50mm / 75mm aluminium self staging screws integral EPDM washer screwed in roof covering all as directed. (Note : Height of the bldg up to G+3 storey including necessary safety arrangements)
S& F Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walkways; railings; framework of water tanks and similar work conforming to Fe.410 W (Gde E 250 Quality B) complete all as specified and as directed by Engr-in-Charge.
M&L for Plain Cement Concrete Type B1 1:2:4 (nominal mix) using 20 mm graded stone aggregate in roof padding concrete/ similar concrete work with WPC as per manufacturers instruction complete all as specified and as directed by Engr-in-Charge. Note : WPC shall be measured & paid separately on relevant item of this schedule).
M&L for plastering in CM 1:3, 10 mm average thickness over the treated surface using water proofing compound as per manufacturers instruction including finished even and smooth without using extra cement all as specified. Note : WPC shall be measured & paid separately on relevant item of this schedule).
Material and labour for APP modified waterproofing treatment over existing RCC roof slab with following specification including brushing off the surface to receive the treatment obtain the required surface and then providing 10mm screed bed with water proofing compound with required slope complete as directed :- Note : Rendering and WPC shall be measured and paid separately under relevant item of this schedule (a) Applying bituminous primer @ 1.2 kg/Sqm on the prepared dry roof surface. (b) Laying 4mm thick APP membrane Plain finish weight not less than 3 to 4 kg per sqm by torch application with minimum 10cm side lap and 15cm end lap.(c) Applying bituminous primer @ 1.2 kg/Sqm and applying one coat of bituminous aluminium paint at the rate of 0.3kg/sqm Note : The laying of membrane shall be got done through an authorized applicator of manufacturer of APP membrane.
Dismantling of wall and ceiling boards (fibre, pulp , insulation etc)or insulation boards /slabs /blankets any thickness including cover fillets, grid work any description and any position complete all as specified and as directed by Engr-in-Charge.
S&F aluminium anodised snap grid false ceiling of standard aluminium section such as wall angle of size 38mm x 25mm x 2.4mm weighing 0.36 Kg/Rm main/cross tees of size 36.5mm x 25mm x 1.4mm weighing 0.24 Kg/Rm, grid size n.exc. 610 x 610mm suspended with 4mm dia GI wire at interval n.exc. 600mm centre to centre for main & cross tees fixed to roof slab, roof truss fixed with suitable size MS hook and fastening bolts etc complete all as specified and as directed by Engr-in-Charge.
S&F 4 mm thick non asbestos fibre cement building boards fixed or laid/inserted to timber/GI/Aluminium framework with screws in ceiling confirming to IS-14862 and fixed with necessary clips complete all as specified and as directed by Engr-in-Charge.
Demolition of existing vitreous china squatting pan with integral foot rest including P or S trap alongwith unreinforced cement/lime concrete bed including dismantling, floor, hearth/tiling and cement mortar screed rubbish off the premises depositing outside MD land and the following procedure shall be adopted step by step :- (a) Cleaning the sunken portion of toilet/bathroom/WC thoroughly to remove laitence,dirt,dust etc. (b) Sanitary pipes entering through the walls and floor shall be sealed with Dr.Fixit Bathseal tape and the gaps shall be sealed with non shrink cementitous grout Dr.Fixit Bathseal Grout Nahani traps etc to be fitted securely and the gaps around shall be arrested in same manner. (c) Apply cementitous waterproof coating of Dr.Fixit Bathseal Plus on floor and all along the junction and including upto height of 150mm on wall.Allow drying time of 6 to 8 hrs and then apply second coat of treatment. (d) Forming angle fillet/coving all along the junction of wall and floor of size 40mm x 40mm and applying15mm thick rendering using cement mortar 1:3 mixed with water proofing compound on sunken floor. (e) Apply cementitous waterproof coating of Dr.Fixit Pidifin 2 K on floor and all along the junction and including upto height of 150mm on wall.Allow drying time of 6 to 8 hrs and then apply second coat of treatment.
(e) 50mm thick Plain Cement Concrete 1:3:6 C2 using 40mm crushed stoned aggregate by mixing necessary liquid water proofing compound laid in slope of 1:60 towards the outer face of wall.Then fill up the top layer using Plain Cement Concrete 1:2:4 B1 using 20mm crushed stoned aggregate. (f) Necessary 20mm CPVC spout pipe shall be fixed with outer projection of 300mm from outer wall.(e) 50mm thick Plain Cement Concrete 1:3:6 C2 using 40mm crushed stoned aggregate by mixing necessary liquid water proofing compound laid in slope of 1:60 towards the outer face of wall.Then fill up the top layer using Plain Cement Concrete 1:2:4 B1 using 20mm crushed stoned aggregate. (f) Necessary 20mm CPVC spout pipe shall be fixed with outer projection of 300mm from outer wall.
M/s Shiva Engineering
EXCEL ENGINEERING WORKS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .