REPAIR / MAINT OF WATER SUPPLY DISTR AT SCV VIHAR MRA VIHAR RSV BHAGAT LINE LBS MARG BS MARG 71 MTN BDE CAMP MG ROAD RLB MARG OLD POLO NRC ORC NRIBHY VIHAR HRDC CAMBEL LINE 4 KUMAON 4 RAJPUT 4/3 GR MANOJ PANDEY CHAURAI PURVA ENCLAVE NEEL MATHA 11 G

Amount

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth and getting out in soft/loose soil for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, laying pipes/cable etc. n exc 10 sq m on plan and not exc 1.5 m in depth complete all as specified and directed.

Returning & filling in of excavated any type soil including spreading leveling watering and well ramming in layers n exc 25 cm thick etc complete all as specified and directed.

Removal of excavated soil/materials to a distance not exceeding 50 m and depositing where directed at a level not exc. 1.5m above the starting point complete all as specified and directed.

Supply, laying, jointing and testing of sluice valve in repair of following bore sizes,as per 'ISI marked' both ends flanged and drilled cast iron body class PN-1.6 conforming to IS-14846/2000 complete with Stainless steel spindle including necessary nut bolts etc with all fittings,complete all as specified and directed..For those sluice valves which are fixed with pillar of over head tank work involve such as breaking of RCC/ lead joint, flange joints will be deemed to be included in the quoted rates, contractor will also repair the demaged floor etc.to match with existing and joints shall be measured & paid seperately)

(a) 100 mm bore

(b) 150 mm bore

(c) 200 mm bore

Taking out cast iron water mains spigot and socket / flanged ends including all fittings like nut bolts washers and rubber gasketd complete all as specifed and directed by EIC

(a) 100 mm bore.

(b) 150 mm bore.

(b) 200 mm bore.

Supply & laying ,testing Ductile Iron pipe 100 mm bore class K-9 both end flanged as per relevant IS in any length suitable for rubber flange joint laid in trenches complete all as specified and directed. (Note : Excavation and earth work shall be measured and paid for separately.)

Supply & laying ,testing Ductile Iron pipe 150 mm bore class K-9 both end flanged as per relevant IS in any length suitable for rubber flange joint laid in trenches complete all as specified and directed. (Note : Excavation and earth work shall be measured and paid for separately.)

Supply & laying ,testing Ductile Iron pipe 200 mm bore class K-9 both end flanged as per relevant IS in any length suitable for rubber flange joint laid in trenches complete all as specified and directed. (Note : Excavation and earth work shall be measured and paid for separately.)

S & F ductile iron specials ISI marked in repair for pressure water mains upto 150 mm bore Bends. Tapers. Tee pieces (single & double branch) any type and angle/radius and straight connecting pieces but all ends flanged etc. complete all as specified and directed. Note : Excavation and earth work shall be measured and paid for separately.

S & F ductile iron specials ISI marked in repair for pressure water mains upto 200 mm bore Bends. Tapers. Tee pieces (single & double branch) any type and angle/radius and straight connecting pieces but all ends flanged etc. complete all as specified and directed. Note : Excavation and earth work shall be measured and paid for separately.

S&F ductile iron connecting pieces one end flanged and other socket or spigot or bell mouth or any size tapper size upto 150 mm bore complete all as specified and directed. (Note - Joints excavation and earth work shall be measured and paid seperatly)

S&F ductile iron connecting pieces one end flanged and other socket or spigot or bell mouth or any size tapper 200 mm to 300mm bore complete all as specified and directed. (Note - Joints excavation and earth work shall be measured and paid seperatly)

M & L for flange pipe joints with 3mm thick rubber gasket (packing ring) incl provision of suitable size bolts, nuts and washers etc. 100 mm bore pipe complete all as specified and directed.

M & L for flange pipe joints with 3mm thick rubber gasket (packing ring) incl provision of suitable size bolts, nuts and washers etc. 150 mm bore pipe complete all as specified and directed.

M & L for flange pipe joints with 3mm thick rubber gasket (packing ring) incl provision of suitable size bolts, nuts and washers etc. 200 mm bore pipe complete all as specified and directed.

Cutting of CI/DI pipes of following dia sizes in position for insertion of Tees, branches etc. Incl dewatering due to residual water in pipes complete all as specified and directed.

(a) 80 mm bore

(b) 100 mm bore

(c) 150 mm bore

(d) 200 mm bore

(e) 250 mm bore

M&L in repair run lead joints for spigot and socket ends for fittings/water mains in repair for new/old pipe lines and fittings of following bore size with and including necessary excavation & earth work and making good to match with existing surface complete all as specified and directed .

(a) 80 mm bore.

(b) 100 mm bore.

(c) 150 mm bore.

(d) 200 mm bore.

Taking up or down steel tubing and all fittings/ connections, including forfixing Old or New steel tube for following sizes all as specified and directed by Engr-in-Charge

(a) 15 mm bore

(b) 20 mm bore

(c) 25mm bore

(d) 40mm bore

(e) 50mm bore

(f) 80mm bore

S&F GI pipe medium grade with all fittings and fixed complete to wall/ceiling or laid in floor /trenches etc. of the following sizes complete all as specified and directed by Engineer-in-Charge (Note - Excavation & earth work shall be measued paid seperately)

(a) 15 mm bore

(b) 20 mm bore

(c) 25mm bore

(d) 40mm bore

(e) 50mm bore

(f) 80mm bore

Relaying /Fixing of serviceable GI Steel Tubing after cleaning ,removing of all type of scale or blockage in trenches or floor /fixed to wall / ceiling in and with all fittings of the following bore sizes complete all as specified and directed. Notes: (i) Fittings & specials as required shall be provided by the contractor. Contractor's rate shall deemed to be included the cost of fittings provided. (ii) Excavation & earth work shall be measued paid seperately.

(a) 15 mm bore.

(b) 20 mm bore.

(c) 25 mm bore.

(d) 40 mm bore.

(e) 50 mm bore.

Drilling & tapping cast iron water mains in position for branch connection of the following :-

(a) 15mm bore

(b) 20mm bore

S& F in repairs GM gate or Globe valve 'ISI marked' with iron wheel head screwed both end for iron pipe all as per latest IS specifications of the following sizes complete all as specified and directed by Engineer-in-Charge

(b) 20 mm bore.

(c) 25 mm bore.

(d) 40 mm bore.

(e) 50 mm bore.

M&L Plain cement concrete 1:3:6 type C-2 using 20mm graded stone aggregate for floors complete all as specified and directed.

M&L Plain cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate as sub base of floors complete all as specified and directed.

M&L fly ash bricks, old size as per IS 1489 (Part I)-2002 buit in CM 1:6 straight or curved on plan exc. 6 M mean radius complete all as specified and directed.

M&L for Rendering 10 mm thick in cement mortar (1:6) on brick or concrete surface finished even and smooth without using extra cement complete all as specified and directed.

Cutting of road (in hard/ dense soil ) for laying pipe line or repair to pipes / lead joints etc .of any size of pipe upto 01 mtr. depth and 0.6 mtr wide and getting out incluiding forming bottom surface to required level and making good the road as per existing all as specified and directed.

Drilling/boaring (horizontally) including also for laying pipe line upto 150 mm /200 mm bore by penumatic tool or horizontal boaring/drilling machine under the existing road (max. 10 mtr. In width) suitable for passing GI/CI/DI tubing complete all as specified and directed.

S&F in repair incluiding taking down quick Coupling Valves, aluminium of size 32 mm (QCV) with self closing thermo plastic lid cover & MS shadle (63mmx32mm) with 300 mm long GI medium grade riser pipe complete all as specified and directed.

S &F in repairs incluiding taking down etc 50 mm dia (outer) Unplasticiscd PVC pipes of pressure rating 10 kgf/cm2 laid in trenchesof following sizes complete all as specified and directed. Note:-Excavation and earthwork shall be meassured and paid seperately.

All as item No 30 above but size 63 mm dia (outer)

All as item No 30 above but size 75 mm dia (outer)

All as item No 30 above but size 90 mm dia (outer)

All as item No 30 above but size 110 mm dia (outer)

Surface dressing & Cleaning away all grass vegetation, sapling ,shrubs, brush wood , udergrowth, roots and trees not exceeding 30 cm girt ( measured one meter above ground level) and removing rubbish upto a distance of 50 mtr outsidem theriphery of the area under clearnece except in the case of surface dressing which incldues for all the foregoing except clearing away of trees complete all as specified and directed.

M&L in repair Mechanical joints for spigot and socket ends for fittings/water mains in repair for new/old pipe lines and fittings of the 100 mm bore size complete all as specified and directed.

All as per item No 36 above but 150 mm bore

All as per item No 36 above but 200 mm bore

All as per item No 36 above but 250 mm bore

Supply and fixing with replacement of CI Dead plate ( flanged ) for flanged ends for fittings/water mains for pipe lines and fittings of the 80 mm bore size complete all as specified and directed.

All as per item No 40 above but 100 mm bore

All as per item No 40 above but 150 mm bore

All as per item No 40 above but 200 mm bore

M&L for Framed work such as grills, gratings, etc with ends of bar, shouldered and /or riveted or forged into spikes framed guard bars barred iron doors, ladders, frame work of water tanks and similar work hung as gates including pintle hinges, stops, hand made sliding bolts confirming to FE 290 Gde Fe 165foundation, filling and mass concrete etc including necessary formwork complete all as specified and directed.

M/s Bajpai Constructions

M/S SWATI CONSTRUCTION

OM NAMAH SHIVAY ENTERPRISES

M/s I C Sharma and sons