GEJM-97/2023-24

Amount

Taking down carefully Copper aluminium point wiring light, Fan, socket or power complete including fixture & fitting such as switches, sockets or power socket complete fitting bracket holder, boards, and making good disturbed surfaces of wall and ceiling etc.

Taking down carefully unserviceable sub main wiring etc.

Taking down unserviceable DBs any type / size carefully disconnecting and making good disturbed surfaces complete all as directed.

Taking down unserviceable MCB SP/SPN/Isolator/MCCB of any rating & size including sheet metal enclosure.

M & L in replacement of Point wiring complete with 1.5 Sqmm single core unsheathed PVC insulated 1100 V, FRLS grade with multistranded copper conductor ISI marked drawn through in existing concealed / surface PVC/Steel conduit and accessories including new MS pressed steel terminal box and including replace laminated sheet 3mm thick for mounting of switches, socket regulator etc including 1.5 Sqmm PVC insulated unsheathed cable multistranded copper conductor and connecting to earth dolly for light, Fan, Plug and bell all as directed and specified by Engr-in-charge. (a) One light point controlled by one 5 Amps one way switch. Note:- PVC conduit up 01 Mtr as required at site rate deemed to be included.

All as per above item No-05 but One light point controlled by two Two way switch

All as per above item No-05 but One ceiling Fan, Exhaust Fan point controlled by one 5 Amps switch.

All as per above item No-05 but One bell/buzzer point controlled by one bell push button on independent board.

All as per above item No-05 but One 3 Pin 6 Amps socket point on the independent board.

All as per above item No-5 but One 3 pin 6 Amp socket point on the same board with other switch.

All as per above item No-5 but with 2.5 Sqmm cable for 15 Amp switch socket out let point on independent board including 2.5 Sqmm PVC insulated unsheathed cable multistranded with copper conductor earthing continuity conductor all as directed and specified by Engr-in-charge.

M & L in replacement of point wiring complete with 1.5 Sqmm single core multi stranded copper conductor FRLSH insulated and unsheathed heavy duty cable in colour code including contineous earth wire with cable of size 1.5 sqmm copper conductor flexible FRLSH insulated drawn in existing concealed / surface PVC/Steel conduit and including terminated into suitable module Modular Metal flush Boxes of Make : Elvira Indoasian or equivalent in List of makes. including white cover plate with frame as per relevant IS for mounting switches, sockets, fan regulators etc complete all as specified and as directed for One light point controlled by one 6 Amps one way switch.

All as per above item No-12 but One ceiling Fan, Exhaust Fan point controlled by one 6 Amps switch.

All as per above item No-12 but One bell/buzzer point controlled by one bell push button on independent.

All as per above item No-12 but One light point controlled by 2 Nos ,6 amps Two way switch.

All as per above item No-12 but One 3 pin socket out let 6 Amp point on independent board

All as per above item No-12 but One 3 Pin socket out let 6 Amp point on the same board with other switch.

All as per above item No-12 but with 2.5 Sqmm cable for 16 Amps switch sockets out let point on independent board including 2.5 Sqmm PVC insulated unsheathed cable multistranded with copper conductor earthing continuity conductor.

M & L in replacement of point wiring complete with 1.5 Sqmm single core multi stranded copper conductor FRLSH insulated and unsheathed heavy duty cable in colour code including contineous earth wire with cable of size 1.5 sqmm copper conductor flexible FRLSH insulated drawn in and including concealed PVC rigid conduit medium grade ISI marked after cutting chases in wall , plastering after concealing conduit, and matching the white wash colour with existing colour and including terminated into suitable module Modular Metal flush Boxes of Make : Elvira Indoasian or equivalent in List of makes. including white cover plate with frame as per relevant IS for mounting switches, sockets, fan regulators etc complete all as specified and as directed for One light point controlled by one 6 Amps one way switch.

All as per above item No-19 but One ceiling Fan, Exhaust Fan point controlled by one 6 Amps switch.

All as per above item No-19 but One bell/buzzer point controlled by one bell push button on independent.

All as per above item No-19 but One light point controlled by 2 Nos ,6 amps Two way switch.

All as per above item No-19 but One 3 pin socket out let 6 Amp point on independent board

All as per above item No-19 but One 3 Pin socket out let 6 Amp point on the same board with other switch.

All as per above item No-19 but with 2.5 Sqmm cable for 16 Amps switch sockets out let point on independent board including 2.5 Sqmm PVC insulated unsheathed cable multistranded with copper conductor earthing continuity conductor.

Supply and fixing in replacement of Switch piano made of polycarbonate flush button single pole one way, 6 Amps, 240 V Make : Anchor PC Penta, Cona or equivalent in LEGRAND.

Supply and fixing switch piano flush button type , single pole two way 5 Amps

Supply and fixing in replacement of Piano Bell push made of polycarbonate piano flush type 6 amps , 240 V Make : Elvira Indoasian or equivalent in Anchor, Cona, SSK, Legrand.

Supply and fixing in replacement of socket 2-in-1, 3 pin 6 Amps made of polycarbonate flush type complete all as specified and as directed.Make : Anchor PC Penta or Cona, SSK, Legrand.

Supply and fixing in replacement of Socket outlet 3 pin, 15 Amps flush type made of polycarbonate complete all as specified and as directed. Make : Anchor PC Penta or Cona, SSK, Legrand.

Supply and fixing in replacement of Switch piano made of polycarbonate flush button single pole one way, 16 Amps, 230/240 V complete all as specified and directed. Make : Anchor PC Penta or equivalent in List of makes.

Supply and fixing in replacement of Switch modular type of polycarbonate flush button single pole Single module, 6 Amps, 240 V Make : Elvira Indoasian or equivalent in Havells, Legrand.

Supply and fixing in replacement of Switch Modular made of Polycarbonate flush button single pole two way 6 Amps, 240 V.Make : Elvira Indoasian or equivalent in Havells, Legrand.

Supply and fixing in replacement of Switch Modular made of polycarbonate flush button single pole single module, 16 Amps, 230/240 V Make : Elvira Indoasian or equivalent in Havells, Legrand.s.

Supply and fixing in replacement of Bell push modular made of polycarbonate piano flush type 6 amps , 240 V Make : Elvira Indoasian or equivalent in Havells, Legrand.

Supply and fixing in replacement of Socket Modular outlet 2-in-1 3 pin, 6 Amps made of polycarbonate flush type complete all as specified and as directed.Make : Elvira Indoasian or equivalent in Havells, Legrand.

Supply and fixing in replacement of Socket outlet Modular 2-in-1 3 pin, 6 & 16 Amps flush type made of polycarbonate complete all as specified and as directed. Make : Elvira Indoasian or equivalent in Havells, Legrand.

Supply and fixing ceiling rose ,3 phase ,PVC polycarbonate ,insulated body. Make- Anchor, Philips, Havells.

Supply and fixing in replacement of modular type Fan regulator 2 Module stepped type (electronic) made of polycarbonate for 1200/1400mm sweep AC ceiling fan. Make : Anchor Roma, Havells REO or equivalent in LEGRAND.

Supply and fix in replacement of fan regulator electronic flush type on the existing phenolic laminated sheet etc 250 volts AC 50 HZ,100 Watts, 4 step complete all as directed.

Supply and fix in replacement of call bell 240 V, 50 Hz sinlge pole complete all as specified and directed.

Supply & fixing in replacement of Ding Dong door bell, AC 230/240 volt single phase complete all as specified and directed.

Supply & fixing in replacement of Switch socket combination 2-in-1 5 pin 6 Amps made of polycarbonate flush type complete all as specified and as directed.Make as per existing and model.

Supply & fixing in replacement of Switch socket combination 2-in-1 3 pin 6 and 16 Amps made of polycarbonate flush type complete all as specified and as directed.Make as per existing and model.

Supply & fixing in replacement of Modular type Switch socket combination 3 pin 6 Amps amp' flush type made of polycarbonate flush type complete all as specified and as directed. Make as per existing and model.

Supply & fixing in replacement of Modular type Switch socket combination 16A, 6 pin, 3 module made of polycarbonate flush type complete all as specified and as directed. Make as per existing and model.

Supply & fixing in replacement of Socket outlet 2-in-1 3 pin, 6 & 16 Amps flush type made of polycarbonate complete all as specified and as directed. Make : Anchor PC Penta or Havells, REO.

Supply & fixing in replacement of switch socket combination 5 in 1, 6 and 16 Amps flush type made of polycarbonate universal controlled by one switch complete all as specified and as directed. Make : Anchor PC Penta or equivalent in List of makes.

Supply and fix in replacement of lamp holder pendant/angle type insulated body with back plate all as directed and specified by Engineer-in-Charge.

Supply and fix in replacement of LED lamp suitable for B22 holder of capacity 7 Watt.

Supply and fix in replacement of existing unserviceable T/L fitting on existing wall with New LED Batten for T - 8 LED tube light 18/20 watts with necessary braket,clamps ,incl. bolts, nuts & washers for fixing arrangement etc complete all as specifed and directed by Engineer-in-charge. Make- Crompton /Bajaj /WIPRO

Supply and fix in replacement of LED tube rod light 18/20 watts T -8 with necessary fixing arrangement etc complete all as specifed and directed by Engineer-in-charge Make- Crompton /Bajaj /WIPRO

Supply and fix in replacement of Recess mounting 2x2 LED luminarie, 36 W deep drawn CRCA housing with high power LED premium white powder coated frame blends seamlessly with ceiling layout, suitable for 600x600 mm modular ceiling grid and also can be suspended with provided kit, complete fitting with all fixing arrangement all as specified and directed by Engr-in-Charge. Make- Crompton /Bajaj /WIPRO.

Supply and fix in replacement of Recess mounting 1 ' x 1' LED luminarie, 24 W deep drawn CRCA housing with high power LED premium white powder coated frame blends seamlessly with ceiling layout, suitable for 300x300 mm modular ceiling grid and also can be suspended with provided kit, complete fitting with all fixing arrangement all as specified and directed by Engr-in-Charge. Make- Crompton /Bajaj /WIPRO.

Supply and fixing round shape 9/10 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete.

All as per item No 55 above here-in-before but 12 watt complete.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete.

Supply and fixing in replacement of energy saving new generation 10W LED IP65 bulk head luminaire with opal diffuser complete all as specified and directed. Make : Havells Cat part No LHEOAOP7UZ6W010 or equivalant in Crompton/ Philips/ Wipro/jaquar

Supply and fixing in replacement of bldg security LED light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete.

M & L for submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor single core cable , multistranded and including suitable size of PVC Concealed conduit and all accessories fixing on walls / roofs / ceiling etc. earth dolly, terminated in terminal box all as specified and directed by Engr-in-charge for 2x4 sq mm and 1x4 sq mm as earth wire

All as per item No 60 above but 2x6 sq mm and 1x6 sq mm as earth wire

Supply & fix in replacement of Vertical Distribution Board MCB VTPN 4 way double door suitable for and including MCB four pole as incomer and out going MCBs and should be IP 43 protected with Copper BusBars, Neutral Links, Earthing bar all as specified and directed. including taking down old UNSV DB/MCB any type. Makes: Legrand/IndoAsian Optipro/Schnider Note:- (i). MCBs shall be measured and paid separately. (iii) TPN DB and MCB should be of same make.

Supply & fix in replacement of sheet metal enclosure MCB distribution board. Single pole & neutral (SPN) 240 volts 4 way with IP-43 IK-09 protection double door complete with appropriate size bus bar and neutral link, fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification .Make- Legrand / Indo Asian / C&S / Havells

Supply & fix in replacement of sheet metal enclosure MCB distribution board. Single pole & neutral (SPN) 240 volts 8 way with IP-43 IK-09 protection double door complete with appropriate size bus bar and neutral link, fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification .Make- Legrand / Indo Asian / C&S / Havells

Supply & fix in replacement of sheet metal enclosure MCB distribution board. Single pole & neutral (SPN) 240 volts 12 way with IP-43 IK-09 protection double door complete with appropriate size bus bar and neutral link, fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification .Make- Legrand / Indo Asian / C&S / Havells

Supply & fix in replacement of MCB single pole (SP) 240 volt 06-32 amp for inductive load connected through cable lugs of suitable size complete all as directed and specified. Make- Legrand / Indo Asian / C&S / Havells

Supply & fix in replacement of MCB Single pole and neutral 240 volt 32 Amp for inductive load connected through cable lugs of suitable size complete all as directed and specified.

Supply & fix in replacement of MCB Single pole and neutral 240 volt 40 Amp for inductive load connected through cable lugs of suitable size complete all as directed and specified.

Supply & fix in replacement of MCB Four pole 415 volt 63 to 100 Amp 415V 10KA 'C' curve miniature circuit breaker for inductive load connected through cable lugs of suitable size complete all as directed and specified.

Supply & fix in replacement of sheet metal enclouser with Single pole and neutral SPN MCB DB complete with single door with 240 V 50 Hz. Make- Legrand / Indo Asian / C&S / Havells

Supply & fix in replacement of MCB Single pole and neutral 240 volt 25-32 Amp for inductive load connected through cable lugs of suitable size complete all as directed and specified.

Supply and fixing ceiling fan complete with blades, Modular fan regulator,clamp,hooks and accessories, 230 V, 1200 mm sweep, Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) and fixing of hooks by anchor fastner all as specified .

Taking down the defective ceiling fan of any sweep and make after disconnecting electrically & mechanically and transporting to the work shop dismantling, examine & carry out the repairs as required and brought back to site, re-fixing, testing in all respect for smooth running and comprising of the following:- (a) Servicing/overhauling the ceiling fan by thoroughly cleaning the bearing, shaft, stator, rotor & applying the lubricant / grease to the bearing including applying one coat of super enameled varnish over the winding to improve the insulation value complete. (b) M& L for opening, cleaning, drying and re-winding the burnt/short circuited winding with same guage supper enameled copper wire to maintain speed at load. (c) M&L for preparing surface scrabing, finishing and Painting of ceiling fan by applying one coats of synthetic enamel paint after preparation of surface complete. (d) Replacement of ball bearing suitable for ceiling fans existing sweep & Make/Model

Taking down the repairable exhaust fan/Wall mounting fan/Pedestal fan of size 300-450 MM sweep, any make, single phase, 230 volts, 50 hz, AC after disconnecting electrically and mechanically and transporting to the work shop dismantling, examine & carry out the repairs as required and brought back to site, re-fixing, testing in all respect for smooth running and comprising of the following:- (a) Servicing/overhauling the exhuast fan by thoroughly clelaning the bearing, shaft, stator, rotor & applying the lubricant / grease to the bearing. (b) M& L for opening, cleaning, drying and re-winding the burnt/shourt circuited winding with same cauge supper enameled copper wire to maintain speed at load including applying one coat of super enameled varnish over the winding to improve the resistance value. (c) M&L for preparing surface scrbing, finishing and Painting of Exhaust fan by applying one coat of synthetic enamel paint after preparation of surface complete. (d) Replacement of ball bearing suitable for exhaust fans any sweep as per existing Make & Model.

Supply & fixing in replacement of ball bearing suitable for ceiling fans 1200 / 1400mm dia sweep.

Supply & fixing in replacement of ball bearing suitable for exhaust fans 300/450mm dia sweep.

Supply & fixing in replacement of Capacitor 2.5 mfd for ceiling fans.

Supply & fixing in replacement of Capacitor 3.5 mfd for exhaust fans.

Supply & fixing in replacement of gun metal bush suitable for ceiling fans of 1200/1400 mm sweep.

Supply & fixing in replacement of gun metal bush suitable for exhaust fans of 300/450 mm sweep.

Supply & fixing in replacement of three core flexible wire 1 Sqmm for connecting up ceiling fans , exhaust fans/wall mounting fan etc.

Supply & fixing in replacement of the wheel type rubber bush with nut,bolt,washers,locking clip etc. suitable for hanging the ceiling fans

Supply & fixing in replacement of the mounting clamps with nut, bolt, washers, locking clip etc complete suitable for fixing at the top of down rod suitable for fixing the ceiling fan.

Supply & fix in replacement of ceiling fan down rod of MS pipe 15mm bore 1.2/1.5 Mtr length including cutting/threading making tide for fixing providing check nuts wachers and clamp with rubber bush etc complete.

Supply & fix in replacement of Casing Caping of size 20 mm, ISI marked complete all as specified.

Supply and fix exhaust fan made of steel body complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mm complete all as specified. Make- Havells/Croptom/Bajaj.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm complete all as specified. Make- Havells/Croptom/Bajaj.

Taking down the existing conduit and copper wire before Supplied & fixed in replacement of Rigid non-metallic PVC conduit of size 20mm dia exclusive of boxes (junction/terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks, after fixing of conduit inserting the existing copper wire and connection as per existing complete all as specified and directed etc.

All as per ser item No 88 above here-in-before but conduit size 25 mm dia

M & L in replacing of LED tube rod 18/20W fitting of suitable size as per existing model complete.

M & L in replacing of LED tube rod 10/12W fitting of suitable size as per existing model complete.

M & L for galvanised steel earthing complete with 60 cm x 60 cm x 6 mm thick galvanised steel earth electrode and 04 mm dia galvanised earth lead wire burried directly in ground (earth pit not less than 2.25 mtr below ground level) with top edge of the plate not less than 1.5 mtr below ground level connected to earth lead 4.0 mm dia GI wire protected by 15 mm bore light grade galvanised iron pipe and other and connected to test point as directed including funnel with watering pipe 20 mm bore light grade galvanised iron wire mesh, charcoal and common salt in alternater of 15 cm complete thickness all around the GI plate electrode complete with earth pit PCC 1:3:6 type CI and RCC cover and necesary excavation and earth work in hard/dense soil and disposal of spoil to a distance not exc 50 mtr and necessary testing complete all as shown in electorical plate No 03 connected to earthing test point including following elements/works all as specified.

Supply and fixing in replacement of Fancy type LED fitting 1x7 Watts E27 LED light frosted glass with chrome finishing wall lamp fixture height 250mm complete all as specified and directed. Make Jaquar Cat part No-JNL-CHR-MB160275541A or equivalent Philips/Wipro.

S&F Vertical Distribution Board (TP&N) 4 way double door suitable for MCCB 3/4 pole of cap upto 125 Amp as incomer and out going MCBs SP and should be IP 43 protected with Copper Bus Bars, Neutral Links, Earthing bar all as specified and directed.

S&F MCCB Three pole 100 Amp, 16 KA, 415 volts with adjustable thermal settings all as spcified and ditected. Make-Legrand/Havell/Indoasian. Note: TPN DB and MCCB should be of same make.

Supply and Fixing Bus Bar chamber Three pole 200 Amp with Alu Bus bar,IP42 Rated ,4 way o/g ways complete all as spcified and ditected. Cat part No :- Indoasian -cat Ref no.-CPPI1026 HSN Code:- 8170 Or equivalent make

Supply of exterior IP68 LED RGB/RGBW Flexible light strip of 5 mtr standard length with 10-13 Watt per meter which can be compatible with the DMX / Ethernet controller. Minimum System lumens ofminimum 450 lumens/meter and System Lumen Efficacy > 30lm/w. Luminaire light beam spread - 110°, The Strip should have IP 68 protection and is offered IP 67 rated connector to join the LED Strips incontinuity. The luminaire must be offered with Aluminum channel for mounting the strip lights. The product should be complete with all accessories and Driver. The successful bidder shall submit the following certifications/reports for approval before supply of materials: product data sheets, LM79 report from NABL accredited lab, illuminance diagram, polar curve & LM80 report issued by LED manufacturer & RoHS Compliance alone with CE certificate. The bidder shall upload the luminaire BIS certificate along with technical bid. The luminaire shall be supplied with necessary connectors for connecting lead/jump cables. Similar to BGC301 or equivalent

S & F of LED based Flood light, housing made up of pressure die cast aluminum Alloy with effective thermal management,sturdiness and embossed brand name/logo name of manufacturer. The fixture should have a minimum system efficacy of 90 lumen/Watt and a minimum system lumen output of 3500 lumens and maximum system wattage of 35 Watts of 3000K colour temperature.The fixture shall have a CRI of minimum 70. The fixture shall be designed for a system life of 50,000 hours @70% lumen maintenance. Ingress Protection of IP66 (lamp and gear Compartment) and Mechanical Impact Resistance Rating of IK >=05.The fixture driver should have an operating voltage range of 140-270 V, surge protection of >=3KV, PF >0.9 and THD<20%. The fixture should comply with the parameters as per IS10322. The LED driver should comply to IEC61000-3-2 ed.3.2, 2009 for Harmonics, IEC61347 -2 -13, 2006 in Conjunction with IEC61347-1 ed.2.0, 2007 for Electrical Safety. Manufacturer shall have inhouse lab approved by NABL. LM 79 and LM80 reports need to be submitted from a NABL/UL accredited lab to verify above parameters. Similar to Philips BVP120 or equivalent

Supply of Circular shape architectural 3000K LED flood light with integral driver & housing made of Die-cast aluminium alloy - ADC12. The luminaire shall be no bigger than Ø 135 X 141 (±10%) with bracket. The luminaire shall have electrostatically applied polyester powder coating finish. The luminaire bracket shall be made of cold-rolled steel & shall be so designed that the luminaire can be tilted to ±90°. The bracket shall have locking mechanism to fix & secure the desired tilt angle. The luminaire shall have silicon gasket between optical cover & LED chamber to ensure proper IP66 protection. The luminaire must have a breather gland. The nominal weight of the luminaire shall be 1.8KG (±10%). The luminaire shall be equipped with high-power Cree, osram, lumiled or equivalent. The fixture shall have 30° beam angle & the lens shall be made of anti-aging & anti UV-PMMA material. The optical cover shall be made of IK06 rated clear tempered glass. The LEDs shall have minimum CRI ≥80 for white light & shall have SDCM≤4. The fixture shall come with power & DMX cable of minimum 100mm length. The fixtures shall be installed with have IP67 connectors. The luminaire shall have system wattage not exceeding 24W and system lumen output of not less than 1780 lumens. Fixture shall operating temperature range of -40°C to 50°C. The fixture shall have an integral driver with input voltage for 220-240 VAC, 50/60Hz. The luminaire shall have declared life of 50,000 burning hours at L70 @ 35deg. The luminaire shall have class I insulation. The successful bidder shall submit the following certifications/reports for approval before supply of materials: product data sheets, LM79 report from NABL accredited lab, illuminance diagram, polar curve & LM80 report issued by LED manufacturer & RoHS Compliance alone with CE certificate. The bidder shall upload the luminaire BIS certificate along with technical bid. The luminaire shall be supplied with necessary connectors for connecting lead/jump cables. Similar to Philips BVP371 or equivalent

Supply of 1000mm long rigid architectural 3000K LED Linear light with non-integral driver & housing made of Extruded aluminium alloy 6063 grade & die-cast aluminium end caps. The luminaire shall have electrostatically applied polyester powder coating finish. The luminaire width shall be 25.4mm & height of 35mm without brackets. The luminaire’s integrated brackets shall be made of extruded aluminium & the same shall be so designed that the luminaire can be tilted from ±95°. The luminaire shall have silicon glue between optical cover & LED chamber to ensure proper IP66 protection. The nominal weight of the luminaire shall be 0.86KG (±10%). The luminaire shall be equipped with high-power Cree, osram, lumiled or equivalent. The fixture shall have 20°X30° beam angle & the lens shall be made of anti-aging & anti UV-PMMA material. The optical cover shall be made of IK06 rated clear tempered glass. The LEDs shall have minimum CRI ≥80 for white light & shall have SDCM≤4. The fixture shall come with power & DMX cable of minimum 100mm length. The fixtures shall be installed with have IP67 connectors. The luminaire shall have system wattage not exceeding 15W and system lumen output of not less than 960 lumens. Fixture shall operating temperature range of -40°C to 50°C. The fixture shall have an Non-integral driver with input voltage for 220-240 VAC, 50/60Hz. The luminaire shall have declared life of 50,000 burning hours at L70 @ 35deg. The luminaire shall have class I insulation. The successful bidder shall submit the following certifications/reports for approval before supply of materials: product data sheets, LM79 report from NABL accredited lab, illuminance diagram, polar curve & LM80 report issued by LED manufacturer & RoHS Compliance alone with CE certificate. The bidder shall upload the luminaire BIS certificate along with technical bid. The luminaire shall be supplied with necessary connectors for connecting lead/jump cables & end plates/covers. Similar to Philips BCP386 or equivalent

Supply of extruded aluminium channel of 1m length with PC cover

Supply of IP Connector for LED strip lights

Supply and Instalaltion of IP65 metal housing power supply 24V output. Power consumption- 300W (±10%)driver featuring the constant power mode. Power supply should operate from100~305VAC and offers models with different rated current ranging between 700mA and 6.66A. High efficiency up to 93%, with the fanless design, must be able to operate at -40°C ~+90°C case temperature under free air convection. The design of metal housing and IP67 ingress protection level should be suitable for theoutdoor applications. Must be designed with the latest version of IEC61347/GB7000.1-2015 and UL8750 international safety regulations. The output and dimming circuit are also completely in accordance with the new regulations with isolation to ensure the user and luminaire system safety dung installation. Installation Charges including of use T&P to Complete the job.as per direction by engineer in charge and Complete in all respect.

Supply of DMX decoder for LED strip light

Supply of content program controller with features of 2 DMX512 Universes & supports upto 2 DMX Universe. Rnage of input voltage 140 to 270V. Works as a stand-alone or computer driven controller, Secure digital (SD) card drive for flexible show storage, USB 2.0 interface for downlodin shows, and configuring from attached PC, flexible, adaptable mounting option, should be provided with light show authorizing software, minimum five pre configuration effects, adjust effect settings such as color, speed, and brightness. Sof copy of atalogues, Test cretificates - Third party tests, BIS R Number, UL/cUL, FCC Class B, CE, C-Tic, ASTM B117 for 5000 hours is mandatory. Similar to Philips iPlayer3 or equivalent

Supply of addressing device for fast and convenient address writing and testing of DMX512 luminaires. The device should supports internal test animation for DMX512 addresses verification. The device should automatically write address to a whole group of interconnecting luminaires within minutes. The device should be compact size and touch screen.

Harsh Electricals

Durga Electricals