REPAIRS REPLACEMENT OF FLOORING PLUMBING SANITARY FITTINGS PERIODICAL SERVICES TO OTM ACCN INCLUDING WELCOME MAINT FOR SH 2 and

Amount

Taking down Chowkats or frames with shutters (without taking off shutters from the frames) area of opening not exceeding 1.5 sq m each all as specified and as directed.

Taking down Chowkats or frames with shutters (without taking off shutters from the frames) area of opening exceeding 1.5 sq m, but not exceeding 4 sq m each all as specified and as directed.

.Taking down shutters of any description of area exceeding 1 sq m and not exceeding 2 Sq m each complete all as specified and as directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening as per specification & drawing as per specifications and drawing complete or as directed by Engineer-In-Charge.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing.

Repair / Re-securing, easing, adjusting & re-fixing door shutters of any description in the same opening after laying of tiles, area of shutter exceeding 1 sq m but not exceeding 2 sq m each, including making good the disturbed surfaces to match the existing, complete all as specified and directed.

Repairs to steel windows / ventilators (area of each shutter not exceeding 0.6 Sq m) of any description, replacing unserviceable handles, hinges, peg stay, etc, of any type / pattern and making window / ventilator shutter absolutely working condition, including necessary welding if required, complete all as specified and as directed.

Supply and fix, Pressed steel door frame of size 105 x 60 mm using 1.25 mm thick sheet with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc. complete all as specified and as directed.

Supply and fix, Pressed steel door frame of size 125 x 60 mm using 1.25 mm thick sheet with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc. complete all as specified and as directed.

M & L PCC 1:3:6 type C0 using 12.5mm graded stone aggregated as in filling the chowkats/frames complete all as specified and as directed.

Supply and fix 35 mm thick plain framed paneled factory made shutters (two panel) with II nd class hardwood rail and style with lock rail and panel of 12 mm BWP commercial ply with commercial veneer on both faces. The size of rail and style as per IS - 1003 Part - I , kiln seasoned and chemically pressure treated complete all as specified and as directed.

Supply and fix, 35 mm thick Factory made Second class hardwood Glazed, gauged and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a); supplied and fitted to Chowkats all as specified and as directed.

Taking down boards of any description and any size as in shelves complete all as specified and directed.

18/19mm thick one side prelaminated particle board, interior grade, with decorative choice laminate as in shelves,cupboards etc and fixed with screws to steel/timber frame work including provision of 6mm thick teakwood edging etc complete all as specified and directed

S&F in repair Continuous (piano) hinges, mild steel, bright finish or electrogalvanised with width of flaps (When open) 30 mm

S&F Stainless steel handle 100mm size complete all as specified and directed

S & F Magnetic ball catches of standard type fixed complete all as specified and as directed

Taking down unserviceable steel windows/ventilators with frame and shutters (double leaf/triple leaf shutter with frame i.e. fly proof and glazed) except grill/guard bars but including glass panes, mosquito proof mesh etc complete all as specified and as directed. Note:- Area of over all opening of window/ventilator shall not exceed 0.35 Sq m each.

Taking down unserviceable steel windows with frame and shutter (double leaf/triple leaf shutter with frame i.e. fly proof and glazed) area of each shutter exceeding 0.5 Sq m and not exceeding 3 sq m except grill/guard bars but including glass panes, mosquito proof mesh complete all as specified and as directed.

Dismantling of wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

S&F Framed works such as grills, gratings, etc and hung as gates including pintle hinges,stops hand made sliding bolts etc with end bars shouldered and /or riveted, or forged into spikes,framed guard bars, barred iron doors, ladders,framed balusters,walk ways,railings,frame work of water tanks and similar work con-forming to Fe-290 Gde -E-165 complete all as specified and as directed.

S & F Powder coated aluminium frame/shutter for doors, windows, ventilators with one or more rebates including joining cleat for fixing, rubber neoprene packing for fixing, including minor fitting like lock, handle, roller for sliding etc. complete all as specified Note :-1. For payment purpose weight of aluminium section shall be only measured. 2. Cost of aluminum mongry, lock, rubber packing, roller for sliding are included in the quoted rate. 3. Sheet glass and wire gauge shall be measured and paid separately

Hacking out old broken glass (any thicknesss, size,quality or description) from metal frame inlcuding punching or drilling out old glazing pins/spring clips & providing & fixing new ones

S & F 4mm thick pin head glass and glazing with oil putty, or beading and necessary clips as square n exc. 0.5 Sqm in each pane complete all as specified and directed.

S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F in repair Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

M & L for applying two coats of synthetic enamel paint over a coat of pink primer including preparation of previously untreated or new wooden surfaces exc 10 cm in width or girth complete all as specified and as directed.

M&L two coats of synthetic enamel paint on new steel surfaces of any description over 10 cm width or girth including preparation of surfaces all as specified and as directed..

S & F Aluminium anodised barrel tower bolts of extruded section, 150 mm long all as specified and as directed.

Supply and fix 150 mm Aluminium extruded alloy anodized handles, cast type complete all as specified and as directed.

Supply and fix 100 mm Aluminium extruded alloy anodized handles, cast type complete all as specified and as directed.

Supply and fix Butt hinges, medium weight, cold rolled mild steel of size 100 mm complete all as specified and directed.

S&F stainless steel Butt hinges, medium weight, of size 100 mm complete all as specified and directed.

S & F aluminium alloy, anodised, sliding door bolt with hasp, staple bolt type and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections 300 mm long all as specified and as directed.

S & F in repair door stopper of rubber and aluminium alloy body, 150 mm size fixed all as specified and as directed.

S&F in repair Single action spring hinges, mild steel with steel wire spring, stove enameled black, 100mm size including necessary welding fixed in repair to steel door frame complete all as specified and directed.

Tubular drapery rods, decorative type, made of 25mm bore mild steel powder coated (wall thickness not less than 0.63mm thick) bright finish, colour and pattern approved by GE including taking down existing curtain/drapery rods of any size/description/pattern, complete all as specified and directed.

S&F in repair mild steel prepainted brackets suitable to hold the drapery rod/ curtain rod 25mm dia and fixed to wall (concrete/ brick masonary) with the help of 2Nos 50mm long steel screws and rawl plug including drilling with electric drill and making good the disturbed surface complete all as specified and directed.

Demolition of brick work or stone/boulder PCC black masonry, built in cement mortar etc and removing debris outside MD Land complete all as specified.

M&L precast cement concrete block masonry with solid block, type C-1,1:3:6 mix ( using 20mm graded aggregate ), exc 10cm in width and setting in cement mortar 1:6 complete all as specified and directed.

M&L precast cement concrete solid building blocks or slabs, type C-1,1:3:6 mix ( using 20mm graded aggregate ), 10cm thick ( with plain or interlocking joints as directed) setting in cement mortar 1:4 complete all as specified and directed.

Taking down cement plastering of any thickness on brick, concrete or stone walls, partitions, ceilings etc including raking out joints, hacking for key, scrubbing down with water etc, removal of rubbish off the premises.

M&L for 5mm thick rendering on ceilings in cement mortar 1:3 and finishing the surface with even and smooth without using extra cement all as specified and as dire

M&L for 10mm thick rendering on brick or concrete surface in cement mortar 1:6 and finishing the surface with even and smooth without using extra cement all as specified and as directed.

M&L for 15mm thick rendering on brick or concrete surface in cement mortar 1:4 and finishing the surface with even and smooth without using extra cement all as specified and as directed.

Preparing the newly plastered surfaces of walls and applying two coat of oil bound distemper over a coat of alkali reistant primer over 1.00mm thick wall are cputy complete all as specified and directed.

Preparing the newly plastered surfaces of ceilings and applying two coats of oil bound distemper over alkali-resistant primer and 1.00mm thick wall putty complete all as specified and directed.

Taking down unserviceable GI tubing, supply and fixing new 15 mm bore Galvanized Iron tubing, medium grade, with all fittings, such as Tee, elbows, sockets, unions, short pieces and application of bituminous paint in concealed portion, fixed to wall/ ceiling or laid on floors, complete all as specified and as directed. Notes: i) Taps, valves in any shall be removed before taking down pipe, ii) Cutting chases for concealed piping shall be measured and paid separately under respective item.

Taking down unserviceable GI tubing, supply and fixing new 20 mm bore Galvanized Iron tubing, medium grade, with all fittings, such as Tee, elbows, sockets, unions, short pieces and application of bituminous paint in concealed portion, fixed to wall/ ceiling or laid on floors, complete all as specified and as directed. Notes: i) Taps, valves in any shall be removed before taking down pipe, ii) Cutting chases for concealed piping shall be measured and paid separately under respective item.

Taking up or down 15 mm dia, GI tubing and connections, cleaning, re-fixing old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.), after cleaning and application of bituminous paint in concealed portion of tubing, including cutting and threading pipe and provision of additional fittings such as sockets, tee, elbows, unions, (if required) complete all as specified and as directed. Notes: i) Taps, valves in any shall be removed before taking down pipe, ii) Cutting chases for concealed piping shall be measured and paid separately under respective item.

Taking up or down 20 mm dia, GI tubing and connections, cleaning, re-fixing old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.), after cleaning and application of bituminous paint in concealed portion of tubing, including cutting and threading pipe and provision of additional fittings such as sockets, tee, elbows, unions, (if required) complete all as specified and as directed. Notes: i) Taps, valves in any shall be removed before taking down pipe, ii) Cutting chases for concealed piping shall be measured and paid separately under respective item.

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exceeding 10 cm girth, all as specified and as directed.

Supply and fix in repair, Chromium plated Wall mixer with bend pipe for overhead shower with built-in non return valve with CP wall flanges,Make Cat part No F280018 of Hind ware or equivalent fixed in repair complete all as specified and directed by GE

S & F in repair 15 mm CP cast copper alloy bib taps fancy type screwed down, screwed for iron pipe or for brass ferrule Make Cat part No F28002 of Hind ware or equivalent including taking down old bib taps complete all as specified and as directed.

S & F in repair 15mm CP cast copper alloy bib taps fancy type screw down ,screwed for iron pipe or for brass ferrule Make Cat part No F28004 of Hind ware or equivalent including taking down old bib taps complete all as specified and as directed.

S & F 15 mm pillar taps, cast copper alloy fancy type , chromium plated screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe including taking down old pillar taps Make Cat part No F28001 of Hind ware or equivalent complete all as specified and as directed.

S & F in repairs CP fancy type angle cock, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed Make Cat part No F280004 of Hind ware or equivalent complete all as specified and as directed.

M & L Gun metal Gate valves 20 mm dia with iron wheel head, screwed both ends for iron pipe and fixed including cutting the old pipes as in repair complete all as specified and directed

Supply and fix in repair chromium plated overhead shower rose 125mm dia with swivel joints with and including overhead shower arm 230mm with wall flange ,Make Cat part No F160025 of Hind ware or Techno equivalent complete all as specified and directed by GE.

S & F in repair Chromium plated fancy type brass soap dish with wall hook complete ,Make Cat part No F840006 of Hind ware or Techno equivalent all as specified and as directed.

Supply and fix in repair Stainless steel toilet paper holder with flap guard, fixed to wall with CP brass screws and PVC cleat,Make Cat part No F840009 of Hind ware or Techno equivalent complete all as specified and directed by GE.

S&F in repair CP towel ring 200mm dia Fixed with chromium plated screw and PVC cleat fixed in repair etc complete ,Make Cat part No F160023 of Hind ware or Techno equivalent all as specified and directed.

Hand shower (Health Faucet) with 8mm dia, 1.2m long flexible tube in chrome finish and wall hook with NRV (Back flow preventer) fixed in position to wall, fixed in repair complete ,Make Cat part No F160023 of Hind ware or Techno equivalent all as specified and directed by GE

Supply and fixed in repair Single towel rail brass chromium plated 600mm long fixed with chromium plated screw and PVC cleat etc complete all as specified and directed.

S & F in repair PVC connecting pipe 600mm long 15 mm dia both end having brass coupling nut and PVC washer all as specified and as directed.

S&F Vitreous china white wash down water closet pan (pedestal pattern) with PP soft closing seat cover, hinges, fixing accessories set (excluding flushing cistern and flush pipe), including UPVC (SWR) ‘P’ or ‘S’ trap and connection to drain (or outgoing pipe) and to flush pipe, antisyphonic pipe fixed in repair including dismantling existing water closet etc Make Cat part No S1050105 of Cera or Techno equivalent complete all as specified and directed by GE”

S&F Vitreous china White Squatting Orissa Pattern pan of size 580x440mm, including UPVC ‘P’ or ‘S’ trap, front or back inlet and integral foot rests and making connection to trap and to flushing pipe, anti syphonic pipe, fixed in repair including dismantling existing squatting pan and making good to disturbed floor, complete all as specified and directed. Make : Cat part No CALINA S3010102 of CERA or techno-commercial equivalent model in other makes as approved

S&F in repairs 10 ltrs capacity (PVC), valve less, syphonic action type, fluhsing cistern, low level, white, with inlet, ball valve, float and handle including brackets, Make Cat part No B1010102 of Cera or Techno equivalent complete all as specified and directed.

S&F Vitreous China wash basin, white, flat back, size 550x400mm excluding waste, chain and plug and porcelain stopper but including brackets, with inlet and outlet screwed for pipe or connections including 32mm CP waste Coupling necessary packing, union and cap and fixed in repairs Make Cat part No S2040103 of Cera or Techno equivalent complete all as specified and as directed.

S&F sinks made of stainless steel 1mm thick kitchen or laboratory /without laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe,overall size 495mm x 420mm and bowl size 410mm x 330mm x 160mm complete all as specified and as directed.

S&F in repairs stainless steel plate rack of 0.63mm thick sheet, size 600mm x 750mm complete all as specified and as directed. Make: Blue star or equivalent

S & F rotational moulded polyethylene water storage tanks three layered (cylindrical, vertical with closed top ) hoisted and fixed in position of 500 Ltrs capacity including taking down old one all as specified and as directed.

Uprooting scrubs/plant/flora & fauna on wall girth not exceeding 100mm from brick wall by cutting holes into masonry/walls for digging out roots and dosing Sulfuric/Phenolic Acid as per manufacturer's instruction to burn deep rooted tree roots and making good the disturbed area with cement mortar in CM 1:3 using water proofing compound including necessary scaffolding upto a height of 16 metre complete all as specified and directed.

Cleaning of roof top surfaces of any type/description, up to 15m height in accessible roof by removing tree leaves or any other waste material carefully to avoid damage to existing roof treatment including cleaning of rainwater pipes of any description and any size for smooth flowing of rain water and removing the debris outside MD land complete all as specified and as directed. Note: (i) The quoted rate shall deemed to be included for cleaning the same roof area twice in current contract period. (ii) If cleaning is done once in a location ,payment for the same will be made at half the rate quoted by the contractor.

.S&F in repair Corner glass self assembly consisting of 5.5mm thick sheet glass self 25cm wide with chromium plated bracket guard and fixed with CP screws and wood cleats with wall Make Cat part No F 5005102 of CERA or equivalent complete all as specified and directed.

S&F in repair glass self assembly consisting of 5.5mm thick sheet glass self 12cm wide with chromium plated bracket guard and rail 60cm long and fixed with CP screws and wood cleats with wall Make Cat part No -CAN-CHR-1171N of cera or equivalent complete all as specified and directed.

S & F (SWR) UPVC pipes 110 mm dia single socketed in any length with solvent cement joints laid under floor or on walls fixed as soil waste/vent pipes including taking up or down existing PVC pipes and connections complete all as specified and as directed..

S & F (SWR) UPVC pipes 75mm dia single socketed in any length with solvent cement joints laid under floor or on walls fixed as soil waste/vent pipes including taking up or down existing PVC pipes and connections complete all as specified and as directed..

S & F (SWR) UPVC pipes 160mm dia single socketed in any length with solvent cement joints laid under floor or on walls fixed as rainwater pipes including taking up or down existing PVC pipes and connections complete all as specified and as directed..

S & F (SWR) UPVC pipes 40mm dia single socketed in any length with solvent cement joints laid under floor or on walls fixed as waste pipes including taking up or down existing PVC pipes and connections complete all as specified and as directed..

Supply and fix in repair PVC waste pipe 32mm bore not less than 800mm long complete all as specified and direceted

Supply and fix in repair PVC waste pipe 40mm bore not less than 800mm long complete all as specified and direceted

Supply and fix in repair 100mm dia CP garting usnig white cement complete all as specified and direceted

S&F in repair PVC floor trap/Nanhi Trap with plain/single hole CP grating including jointing to waste pipe in cement joint, of outlet 75 mm.dia

S & F 75mm dia outlet PVC multi floor trap with CP grating including dismantling the damaged trap all as specified and as directed.

S & F PVC (SWR) bends any radius 75 mm dia of bore, including taking down old bends all as specified and as directed.

S & F PVC (SWR) bends any radius 160 mm dia of bore, including taking down old bends all as specified and as directed.

S & F PVC (SWR) bends any radius 40 mm dia of bore, including taking down old bends all as specified and as directed.

S & F PVC (SWR) branch piece single (single T)equal of bore 75 mm dia with access door in repairs all as specified and as directed

S & F PVC (SWR) branch piece single (single T) equal or unequal of bore 110 mm dia, with access door in repairs all as specified and as directed

S & F PVC (SWR) vent cowl of bore 110 mm dia, including taking down old PVC vent cowl all as specified and as directed.

Demolition of cement concrete (un-reinforced) in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) and disposing of debris outside MD land complete all as specified and as directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for; and disposing of debris outside MD land complete all as specified and as directed.

Material and labour for Plain Cement Concrete (1:5:10) type E2, using 40 mm graded stone aggregate as in sunken slab filling, mass concrete etc., complete all as specified and as directed.

M&L 75mm thick PCC type D-2, (1:4:8) using 40mm graded stone aggregate as in sub base of floor/ paving

M&L 25 mm thick PCC 1 : 2 : 4 type B0 (using 12.50 mm graded stone aggregate) as floor rough to received tile screed/bedding layer complete all as specified and directed

Material and labour, for padding concrete / leveling course over slabs with Plain cement concrete (1:2:4), type B1 (using 20 mm graded stone aggregate), laid to achieve proper slope as per site conditions, surfaces finished fair to receive screed bed including mixing water proofing treatment, complete all as specified and directed. Note : - Supply only water proofing compound will be measured and paid for separately under respected item.

M&L 75mm thick PCC type C-1, (1:3:6) using 20mm graded stone aggregate as in,Plinth protection/Paving finished surfaces even and fair Incling Joints complete all as specifiedand as directed..

Demolition of floor, hearth or wall tiling including cement mortar bedding (including backing), removing serviceable tiles to store and rubbish off the premises and disposing of debris outside MD land complete all as specified and as directed

M & L Rendering 15mm thick in CM 1 : 3 on brick/concrete surface finished even and smooth without using extra cement and mixed with water proofing liquid complete all as specified and directed. NOTE:- Water proofing compound shall be measured and paid separately under respective item of this Schedule.

M&L for Providing 1.00mm thick BRUSHBOND RFX GREY (which is a two component acrylic polymer modified cementitious coating which shall consists of Brushbond RFX powder and Brushbond RFX liquid acrylic emulsion), grey in colour, of M/s FOSROC, applied using stiff brush, roller or trowel to obtain the desired thickness on plastered surface in sunken floor, all as per manufacturers instructions, complete all as specified and directed.

Supply only liquid water proofing compound

M&L Non-skid joint free coloured ceramic tiles 7 to 8 mm thick, area of each tile exceeding 0.06 sqm but not exceeding 0.11sqm, as in floor set and jointed in neat cement slurry and pointed in white cement mixed with colouring pigment to match colour of tiles over and including 15mm thick screed bed of CM 1:6 complete all as specified and as directed.

S & F glazed ceramic coloured printed tiles of size 450 x 300X 7mm as in dado set and jointed in neat cement slurry & pointed in white cement mixed with pigment to match with color of tiles over and including 10 mm thick rendering in cement motor 1:3 all as specified and as directed.

Material and labour, for Vitrified tiles flooring with Light shade 10 mm thick (Square / rectangular), tiles, area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of tiles over and including 15 mm thick screed bed in CM (1:6) complete all as specified and as directed.

Material and labour, for Vitrified tile, skirting/dado, light shade with 10 mm thick tiles of area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, on vertical rates as in skirting, dado, etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of tiles over and including backing coat of 10 mm thick CM 1:3 complete all as specified and as directed.

Demolition of Stone slabs & tiles of any description or thickness in floors, aprons etc. Laid, bedded & pointed in any mortar and removing debris outside MD land omplete all as specified.

M&L for 20mm thick Granite work (of any type) (table rubbed and premirror polished) in single piece in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in cement white (1:2) using marble dust with admixture of pigment to match the shade of granite, including making hole for gas pipe including half rounding the edges of granite, laid over and including 15mm thick screed bed in CM 1:4 complete all as specified and directed.

Renewing tiles of any type and size in patches area not exceeding 5 Sqm including removing and cleaning old tiles, preparing the beds and laying of new tiles of same size/type/description, setting, jointing, pointing etc matching with the existing surface over and including 10mm thick backing coat in CM 1:3 complete all as specified and directed

S&F in repairs mortice lock 100mm size Mortice lock (four levers), vertical type, brass body including handles”doors including screwing and fixing all as specified and as directed.

Disconnecting existing PVC water tank of capacity exc 250 ltr but n.exc 500 ltr fixed on roof by setting aside (or lowering, if required) for cleaning and removing all scale and dirt from tanks and from mouths of circulating pipes etc and hoisting/refixing/reconnecting in same/new position including writing date of cleaning on each tank with white paint, height/size of letters/figures not less than 10cm in height, and refixing existing serviceable ball valves complete all as specified and directed.”

M&L Complete removal of existing treatment and preparing the surfaces of walls plastered or unplastered and applying two coat of distemper oil emulsion over a coat of alkali resistent primer over 1mm putty. complete all as specified and directed

M&L Complete removal of existing treatment and preparing the surfaces of ceilings plastered or unplastered and applying two coat of distemper oil emulsion over a coat of alkali resistent primer over 1mm putty. complete all as specified and directed

M&L Preparing the surfaces of old wall surfaces and applying one coat of distemper oil emulsion complete all as specified and directed

M&L Preparing the old plastered ceiling surfacesor and applying one coat of distemper oil emulsion complete all as specified and directed

M&L Preparing the surfaces of old plastered wall/concrete surfaces and applying one coats of weather-proof exterior emulsion paint hight of the building uptp 15.0 Mtr rate including including scaffolding complete all as specified and directed.

M&L Preparation of old wooden surfaces and applying a coat of synthetic enamel paint over 10 cm width or girth complete all as specified and as directed.

M & L for painting of old steel surfaces of any description not otherwise described over 10 cm width or grith with one coats of synthetic enamel paint including preparation of surfaces etc complete all as specified and as directed.

Grinding and polishing to existing terrazzo flooring including wax polishing complete all as specified and as directed.

Preparing the newly plastered surfaces of walls and applying two coat of oil bound distemper over a coat of alkali reistant primer over 2 mm thick wall are putty complete all as specified and directed.

Demolition and M&L for providing Chequered cement tiles 25cm x25cm x22mm /30 cm x30cm x20 to 22 mm thick of grey cement cement and pigment set jointed and pointed in neat cement slurry in floors, laid over 15 mm screed in CM 1:4 all as speficied and as directed.

R R Constructions

S.R.V.Builders

SAI CONSTRUCTIONS

Gurudut Builders

Solar Electricals and Electronics

GKR and CO

G K CONSTRUCTIONS

Bikarma Enterprise