Dismantling and Erection of 3.3 KV HT Overhead Line at Penganga OCM,Wani Area.

Amount

The bidder to quote rates excluding GST and including PF. The bidders may note this while bidding for this tender.

16-3-4 Making cement concrete foundation including excavation (60 x 60) cm x deep 1/6 of pole length in 1:3:6 cement concrete 20 x 25 mm stone metal, 45 cm x 45 cm x 45 cm /45 cm dia. x 45 cm. height plinth duly plastered, with necessary curing and finishing complete. (for above 9 m poles)(Material +Labour)

16-3-6 Making cement concrete foundation including excavation (60 x 60x 150) cm deep in 1:3:6 cement concrete, (20 to 25) mm stone metal with necessary curing and finishing complete.(for stay).(Material +Labour)

8-1-10 Erecting rolled steel joist (girder) pole 200 x 100 mm. (25.9 kg/m) with provided base plate in provided foundation as per specification no. OH-PL/RSJ(Labour only)

8-7-2 Supplying and erecting G.I. stay set for poles, including loop insulators at inaccessible height complete with anchor plate 300 x 300 x 6 mm., straining screws, G.I. stay wire 7/8 SWG, G.l. stay rod 20 mm x 1.8 m length and pole clamps duly erected in provided cement concrete foundation.(Material +Labour)

8-4-11 Erecting 100 x 50x6 mm with 4.7 mm thick web and 7.5 mm thick flange channel iron cross arm of suitable length for 2.4m wide DP structure and erecting on DP with 50x6 mm clamp as per approved method of construction and complete as per specification no. OH-PL/BKT.(Labour only)

8-4-12 Erecting vee cross arm with ISM channel of 75x40x6mm, for 11kV HTOH line with arrangement to fix insulator at 45mm from the end & horizontal distance between insulators 1220 mm bent at angle of 60 degree keeping base 305 mm and the total vertical height of V cross arm as 460mm, and fixed on pole with MS clamp of 80x10 mm, nut bolts,washers complete as per specification no. OH-PL/VCA. (Labour only)

8-4-14 Supplying and erecting 75x40x6 mm with 4.4 mm thick web and 7.3 mm thick flange channel (top pin) with clamp of suitable length so as to maintain vertical clearance of 1065 mm for 11 kV,1320 mm for 22 kV between insulators for erection of top pin insulators complete as per specification no. OH-PL/VCA .(Material +Labour)

8-4-16 Supplying and Erecting bracket for guarding of HT OH Line, made from channel iron 1600 mm in length and 65 x 65 x 6mm thick, V bend 7.3mm thick flange erected on pole as per specification no. OH-PL/VCA. (Material +Labour)

8-5-11 Erecting ACSR conductor of size - 6/1-4.72 mm (Dog) complete. (394 kg/km) as per specification no. OHCON/ ACSR. (Labour only)

8-5-12( PWD CSR 2017-18) Supplying and erecting hard drawn G.I. wire 8 SWG complete erected for overhead line with proper size of G.I. Wire for binding with jumpering etc.(Material +Labour)

8-6-6 Supplying and erecting porcelain disc type insulator suitable for 11kV line, complete as per specification no.OH-INS/DI(Material +Labour)

8-6-9 Supplying and erecting porcelain pin type insulator with G.I. pin suitable for 11kV line, complete as per specification no. OHINS/ PN(Material +Labour)

8-7-18 Supplying and erecting guarding lace for H.T.O.H. line with 8 SWG G.I. wire to protect the H.T. overhead line with binding wire of 20 SWG G.I. wire for 75 mm section on either side.(Material +Labour)

8-8-2 Dismantling the existing pole above 6 m height with brackets, clamps, insulators, stay from the cement concrete foundation and making the site clear by refilling the pits with excavated materials and bringing it to the ground level..(Labour only)

8-8-3 Dismantling the existing overhead line including G.I. wires of all sizes without damaging & making the coils in suitable sizes.(Labour only)

Total impact of GST for the purpose of CTC