Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Admitted-Finance | Admitted-Finance |
| 3 | Admitted-Finance N A | FARIDABAD | HARYANA | 121004 | Admitted-Finance |
Tender Value
Refer Docs
EMD Value
₹75,820
Closing Date
15 Sept 2023, 12:30 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
PROJECT MANAGER SICOP KATHUA
OFFICE OF THE PROJECT MANAGER SICOP GOVINDSAR KATHUA
UPGRADATION OF EXISTING HANDICRAFTS HANDLOOM BUILDING NEAR RAMLEELA GROUND KATHUA INTO RURAL HAAT
2023_SICOP_226353_1
eNITNo.SICOPPMIIDK24 Dated 14.08.2023
Open Tender
Civil Works
Item Rate
150 days
KATHUA
Please refer Tender documents.
2 documents required · 2 mandatory
₹1,000
Yes
Account No. 0144010100000064 IFSC Code JAKA0GOVIND
₹75,820
Yes
21 Sept 2023
14 Aug 2023
15 Sept 2023
14 Aug 2023
15 Sept 2023
14 Aug 2023
Amount
Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material to the disposal site as per direction of Engineer-in-charge in cement mortar.
Demolishing cement concrete manually/by mechanical means including disposal of material to the disposal site as per direction of Engineer-incharge 1:3:6 or richer mix (i/c equivalent design mix)
Demolishing cement concrete manually/by mechanical means including disposal of material to the disposal site as per direction of Engineer-incharge 1:4:8 or leaner mix (i/c equivalent design mix)
Demolishing brick tile covering in terracing including stacking of serviceable material and disposal of unserviceable material to the disposal site as per direction of Engineer-in-charge.
Demolishing mud phaska in terracing and disposal of material to the disposal site as per direction of Engineer-in-charge.
Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground as per direction of Engineer-in-charge.
Earth work in bulk excavation by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth as directed by Engineer-in-Charge. All kinds of soil
Providing and laying in position cement concrete of specified grade including curing, centring and shuttering. All work upto plinth level with 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) including all carriages complete job.
Providing and laying in position cement concrete of specified grade including curing, centring and shuttering. All work upto plinth level with 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) including all carriages complete job.
Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but including cost of centering shuttering, finishing and reinforcement 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) all carriages complete job.
Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level excluding steel reinforcement but including curing, centring, shuttering, finishing and all carriages complete job with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size).
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto Thermo-Mechanically Treated bars of grade Fe-500D or more Make (jindal, Panther, Tata Tiscon, SAIL)
Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in Cement mortar 1:6 ( 1 cement : 6 coarse sand including all carriages complete job.
Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level
Half brick masonry with common burnt clay (non-modular) bricks of class designation 7.5 in foundations and plinth including curing in Cement mortar 1:4 ( 1 cement : 4 coarse sand) including all carriages complete job.
Extra for half Brick masonry in superstructure above plinth level upto floor V level
12mm Cement plaster of mix 1 : 6 ( 1 cement : 6 fine sand) including all carriages complete job.
15mm Cement plaster on the rough side of single or half brick wall of mix 1 : 6 ( 1 cement : 6 fine sand) including all carriages complete job.
Neat cement punning
Providing and laying flooring 50 mm thick with cement concrete 1:2:4 (1cement:2 coarse sand: 4 graded stone aggregate 20 mm nominal size) and curing all carriages complete job
Supplying and filling in plinth with fine sand under floors including, watering, ramming, consolidating and dressing complete under floor
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, Complete job.
Banking excavated earth in layers not exceeding 20cm in depth, breaking clods, watering, rolling each layer with 1/2 tonne roller, or wooden or steel rammers, and rolling every 3rd and top-most layer with power roller of minimum 8 tonnes and dressing up, in embankments for roads, flood banks, marginal banks, and guide banks etc., lead upto 50 m and lift upto 1.5 m in All kinds of soil. Underfloor
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 600x600 mm including all carriages complete job.
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete including all carriages complete job.
Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete including all carriages complete job.
Providing and fixing of Toughened glass of 12 mm thick with all necessary fitting for hasting of glass with complete job.
Providing and fixing of Glass Shelves/ rack 8 mm thick supported on vetrified steel section including all sitting for placing of glass complete job, 2ft deep width.
Providing and fixing of hydraulic floor machine
Providing and fixing of stainless steel long handles (inside & outisde) on doors
Providing and fixing of 6'' long lock of good quality make (Godrej/ harrison/ Link)
Providing wood work in frames of cup board second class deodar wood & fixing of 25 mm thick shutter for cup board etc. MDF board shutters including ISI marked nickel plated bright finished M.S piano hinges IS: 3818 marked with necessary screws all accessories complete job.
Supply of furniture items
Wooden executive table size 1500x900x750mm with 3 drawers on one side with 3 in 1 locking arrangement having 3' extension table & having key biard mounted on durable channels provision for keeping CPU & UPS. The top & side panels of the table as well as the side extension shall be made of 17mm thick pre-laminated board fitted with necessary hardware items. Double border top shade/ 25mm thick borderin shape.
Visitors Chairs stainless steel frame made of pipe 1'' 16 gauge with custom seat & back alongwith heavy cushioned arm on PVC arm.
Executive revolving chair high back with wooden base of five wheel with wooden handles & a small cushion is given on handles. Seat & back of chair is covered with superior type of leatherite & deluxe shape is given to its back & high density of foam is used. A good quality of torsion bar & hydraulic system is used for adjusting height. A wooden piece is given on both sides which gives beautiful look to the chair.
Multifunctional Garment stand cloth rack freestanding storage organizer with bottom shelves single pole coat hanger size 150x110x40 cm.
Wall Drope hanger, hooks for hanging clothes, dress display in showroom.
Providing and fixing of decorative sign board 8' X 4' size including lettering 9'' , 60 letters and 2 Nos logo with lighting and all accessories complete job.
Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete
Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface
Distempering with 1st quality Acrylic/oil bound washable distemper (ready-made) having VOC content less than 50 grams/litre of approved manufacturer and of required shade and colour complete as per manufacturers’ specifications, one or more coats on old work
Finishing walls with textured exterior paint of required shade Old work (one or more coats) applied @1.82 ltr/10sqm
Providing and fixing of polythene sheets on roof.
10cm thick (average) mud phaska of damped brick earth on roofs laid to slope consolidated and plastered with 25 mm thick mud mortar mixed with bhusa at 35kg per cum of earth and gobri leaping with mix 1:1 (1 clay: 1 cow dung) and covered with specified tile bricks grouted with cement mortar 1:3 (1 cement: 3 fine sand) mixed with 2% of integral water proofing compound by weight of cement and finishing neat With common burnt clay (non modular) brick tiles of class designation 10.0
Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement: 3 fine sand) as per standard design. In 75x75 mm deep chase.
Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement: 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete.
Applying priming coat with ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood)
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade Two or more coats on new work
Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 meters lead of area of 3 sqm. and below
Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 meters lead of area beyond 3 sqm
Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge Second class teak wood
Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately) Second class deodar wood
Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws Second class deodar wood
Providing and fixing on wall face un-plasticized Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion (i) Single socketed pipes 110 mm diametre
Providing and fixing un-plasticised -PVC pipe clips of approved design to un-plasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 110 mm
Engaging labours/ Gang Coolies for removing/ plucking of small trees bushes
Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests
Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per I.S. 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required Kitchen sink with drain board 510x1040mm bowl depth 250mm
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C waste fittings complete Semi rigid pipe 32 mm dia
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. Internal work-Exposed on wall 15 mm dia. nominal bore
Providing and fixing 15 mm nominal bore C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms
Providing and fixing 15 mm nominal bore C.P. stop cock (concealed) of standard design and of approved make conforming to IS : 8931
Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable size G.I box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required. Wire Make: Anchor/ Havells/ Vguard/ Polycab Conduit Make: AKG/ Anchor/ Finolex/Polypack
Group A
Rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable and 1.5 sq.mm FRLS PVC insulated copper conductor single core cable as earth wire in existing surface/recessed steel/ PVC conduit including dismentaling as required. Wire Make: Anchor/Havells/Vguard/Polycab Conduit Make: AKG/Anchor/Finolex/Polypack
Group A
Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point ( without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required.Group A Wire Make: Anchor/Havells/Vguard/Polycab Conduit Make: AKG /Anchor /Finolex /Polypack
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.(Make: Havells/ABB/Legrand/Anchor/vguard/L&T/Schneider)
5/6 amps switch
3 pin 5/6 A socket
15/16 A switch
6 pin 15/16 A socket
Telephone socket outlet
Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required.(Make: Havells/ ABB/ Legrand/ Anchor/ L&T/Schneider)
3 Module
4 Module
6 Module
8 Module
12 Module
Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.(Make: Havells /ABB /Legrand/Anchor/Schneider/Vguard)
supply of pre-wired, fluorescent fitting / compact fluorescent fitting of T5 batten (20 watt) complete with all accessories. as required.(Make: Havells/ Wipro/ Crompton/ Philips/ Panasonic)
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. (Make: AKG/ polycab/ Anchor/ Polypack)
Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. (Make: VGuard/ Havells/ ABB/ anchor)
SINGLE POLE
SINGLE POLE AND NEUTRAL
Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.(Make: VGuard/ Havells/ABB/Anchor/L&T/Schneider)
Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. ( Make: Finolex/ anchor/ Vguard/ Havells)
2 x 2.5 sq. mm
2 x 4 sqmm
1 x 1.5 sq. mm
2 x 1.5 sqmm
2 x 6 sqmm
Supplying and fixing PVC batten/ angle holder including connections etc. as required( Make: ISI)
Supply & fixing of LED Bulb of 9/10 watt.(Make: Wipro /orient /panasonic /philips)
Supply & fixing of Pvc type 2pole MCB cover complete with all accessories as required. ( Make: ISI)
supply,Installation, testing and commissioning of 1200 mm sweep ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required.( Make: Panasonic/crompton/bajaj/havells)
Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.
Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 4 way Double Door
supply, Installation, testing and commissioning of exhaust fan with louvers of folowing size including connection,fitting complete erected in position etc as required.(250 mm sweep)(Make: VGuard/ Havells /Crompton /Usha /Anchor)
Supplying, Installation, Testing and commissioning of 1.5 TR Split Type Air conditioner ( Hot and cold type) of rating 3 star and above including connection, fitting complete job including indoor and outdoor unit. The item is inclusive of outdoor unit wall bracket /stand for mounting of outdoor unit & suitable size drain piping complete job .( Make: Bluestar/Lloyd/LG/Voltas/Hitachi)
1.5 Ton rating
Supplying, Installation, Testing and commissioning of 5Kva Voltage Stabilizer with wide working range ( 90/100 v to 290v ) for air conditioning system.( Make: Vguard/Luminous/Microtek/Voltas)
Capacity: 5 Kva
Supplying, Installation, Testing and commissioning of recessed/ surface/ concealed LED Light of 18 watt.( Make: Panasonic/ Philips/ Crompton /Wipro /Havells)
Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. 6way Double Door (But without MCB/ RCCB/I solator) Make: Schneider/Anchor/Havells/ABB)
Supplying, Installation, Testing and commissioning of LED Light of following wattage complete with drivers, track and other accessories as required. (Make: Panasonic/ Philips/ Crompton/Wipro/Havells/Jaguar)
12 watt- Recessed COB/focus light
6 watt- Recessed COB/focus light
6 watt- focus light/Track light
12 watt- focus light/Track light
LED Strip light 5mtr
Supply, installation,testing and commissioning of Inverter 1200/1250 va with 01 no battery 180ah including trolley complete with all accessorries as required.( Inverter Make: Microtek/Luminous/Exide/APC) ( Battery make: Amaron/ Luminous/ Exide/APC/Microtek)
Supplying and laying of 50 sqmm twin(2) core aluminium armoured cable/ service line including connection etc as required.( Make: KEI/Havells/Finolex/RR Kabel/Polycab)
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.( Wire Make: Finolex/ anchor/ Vguard/Havells) Conduit make: AKG/Anchor/Finolex/Polypack)
2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire
2 X 4 sq. mm + 1 X 4 sq. mm earth wire
2 X 6 sq. mm + 1 X 6 sq. mm earth wire
Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.( Hot dipped Galvanized type)
Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required.
Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 6.00, Air delivery minimum 210 Cum/Min , 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required.( Make: Orient/ Crompton/ Atomberg/ Havells/ Panasonic)
Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required.01 Run of cable (Make: Dlink/ Delton/ molex/ panasonic)
Supply, installation, testing and commissioning of 4 megapixel Full HD Weather proof & smart detection networkable bullet camerawith min 4 mm Lens Size complete with all accessories as required.(Make: Honeywell/ Panasonic/ Hikvision/ TP link)
Supply, installation, testing and commissioning of I/O Module Complete with box RJ-45 socket Front Plate as per the satisfaction of the Engineer (Make:Schneider/ Dlink/ Havells/ Panasonic)
Supply, installation, testing and commissioning of Semi managed 08 port POE, Complete as per specification and as desired by EIC.(Make: DLINK/ TP LINK/ Hikvision)
Supply and erection of Lockable 9/12 u rack with 5 A strip and two fan for distribution mounting of patch panels, hubs, switches etc complete as per specifications and as desired by EIC (Make: DLINK/ TP LINK/ CP PLUS)
Supply and erection of CAT 6 , 8 Port Jack Panel for termination of CAT 6 Cable, testing and certification of the network with omni/penta scanner of each cable. (Make: DLINK/ TP LINK/ Hikvision)
Supply and erection of CAT 6 , 1 Mtr Patch cords complete as per the specification and as desired by EIC (Make: Dlink/ Delton/ molex/ panasonic)
Supplying, instalaltion, Testing and commissioning of 08 channel Network Video recorder (NVR) with a hard disk memory of 5 TB Capacity complete with accessories as required. (Make: DLINK/TP LINK/Hikvision/honeywell)
Supplying, Installation,Testing & Commissioning of 32 " LED Full HD LCD TV Resolution 1920 x 1080 , with Remote control, USB Plug & play, HDMI X 2 , USB Port wall mount complete with all accessories as required.. Approved Make-Sony/Samsung/Panasonic /LG
Supplying and connection of HDMI Cable patch cord 5 mtrs. ( Make: Dlink/ Tplink/ Terabyte/ Zebronics)
M/S DEEPAK KUMAR GUPTA
M/S NARESH KUMAR
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .