SPECIAL REPAIR TO ROOF SHEET, FALSE CEILING, RENDERING ON WALL, FLOORING, TILING, REPLACEMENT OF DOORS AND WINDOWS AND INTERNAL ELECTRIFICATION TO BLDG NO T-95, T-96 AND T-97 AT MAMUN MILITARY STATION

Amount

Taking down chowkhats or frames of any description not exc 1.50 Sqm each with shutters, (without taking off shutters from the frame) including builders hardware , complete all as specified and directed.

Taking down chowkhats or frames of any description exc. 1.50 Sqm and n.exc 4.00 Sqm each with shutters, (without taking off shutters from the frame) including builders hardware complete all as specified and directed.

M&L for pressed steel frames 125mmx60mm for door, made out of 1.25 mm thick MS sheet with one or more rebates including necessary fixing lugs, hinges, lock strike plate and back filling for chowkats in PCC (1:3:6) type C-0 (using 12.5mm graded crushed stone aggregate) tarring ends incl 02 coats of synthetic enamel paint over a coat of red oxide primer on exposed surface complete all as specified and directed.

M&L for 35mm thick, 2nd class hard wood plain framed, panelled (factory made) shutters (two panels) with lock rail and panel 12mm veneered particle board with commercial veneering on both faces ,The size of rail and stile as per IS-1003 (Part-I) (Larger size to be provided) kiln seasoned and chemically pressure treated, fitted to chowkhats incl 02 coats of synthetic enamel paint over a coat of pink primer after preparation of surfaces complete all as specified and directed.

M&L for 35mm thick glazed and skeleton shutters (Factory made) of 2nd class hard wood and prepared to receive glass or gauge etc with rounded, chamfered or mitred sash bars edges of framing plain chamfered or rounded fitted with cut and mitred beads and fitted to chowkats for securing glass/gauge, size of stiles rails and other parts as per clause 8.24 (a) of SSR Part-I 2009 (Larger size to be provided) incl 02 coats of synthetic enamel paint over a coat of pink primer after preparation of surfaces complete all as specified and directed.

Taking down cement plaster on brick or stone walls,etc including racking out joints , hacjking for keys,scrubing down with water etc, and removal of rubbish out off the permises complete all as specified.

Demolition of plain cement concrete (unreinforced) as in ground floors & pavings not exceeding 15 cms thickness below or above grounds levels complete all as specified and directed.

M&L for Box type Steel windows and ventilators comprised of tubular frame and shutters made out of 1.25mm thick M S sheet tube factory made with double side hung wire gauged shutter & glass/glazed shutter (wire cloth and glass panes only shall be measured and paid separately) with steel handle and steel peg stay dovetailed or welded incl 2 Nos. tower bolts 150mm long for each leaf and 10mm square bar grills at spacing as shown on drg, welded to F I frame work, including other fittings; hinges, handles, tarred hold fasts fixed in PCC blocks all as shown on drg No CEPZ/TD-354/09 sheet 1/3 to 3/3 including two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S&F Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm fixed with tinned tacks, orstainless steel wire staples complete all as specified and directed.

M&L for 3mm thick sheet glass ordinary quality and glazing with oil putty or fixed with beads/ glazing pins not .exc 0.5sqm in each pane complete all as specified and directed.

M&L for 300mm MS Rat tail door spring for door closer, complete all as specified and directed

M&L for 300mm aluminium sliding door bolt with hasp & staple (bolt type) and fixing clip of sheets cast or extruded section and fixing sliding bolt of extruded section etc complete all as specified and directed.

M&L for aluminium anodized barrel tower bolts 200 mm of extruded section and fixed. complete all as specified and directed.

M&L for Aluminium anodised handle, extruded section of size 150mm complete all as specified and directed.

M&L for 150 mm long aluminium floor door stopper of aluminum aloy body and tongue anodized with hard drawn steel spring complete all as specified and directed.

M&L for Rolled sections as in framing FOR COOLER STAND for cladding, glazing and the like fixed with angle cleats and connecting plates, etc conforming to Fe 410 -W (Gde- E- 250) quality - A, complete all as specified & directed.

S&F in repair for curtain rails, anodised aluminium alloy with bracket end bulbs, fancy type fixed in position as approved by Engineer-in-Charge complete all as specified and directed.

M&L for Brick work with Fly Ash Brick (Non-Modular) Class 7.5, straight or curved on plan exceeding 6m mean radius built in CM (1:6) including dismantling of existing brick work complete all as specified and directed.

M&L for preparation of newly plastered surface of wall and applying two coat of exterior weather coat over a coat of primer as per manufacture recommendation complete all as specified and as directed.

M&L for rendering 10mm thick on fair faces of brick work or concrete surface in CM (1:6) on wall surfaces finished even and smooth without using extra cement complete all as specified & directed.

M&L for Rendering 15mm thick in two layers [base layer 10mm in CM 1:6 & finishing layer 5mm thick in cement mortar (1:4)] using liquid water proofing compound in IInd layer only on brick work or concrete surfaces of wall, surfaces finished even and smooth using extra cement complete all as specified & directed. (Note : WPC shall be measured and paid separately)

M&L for preparation of newly plastered surfaces of wall & applying two coats of oil bound distemper (OBD) over a coat of primer as per manufacturer instructions (from same manufacturer of OBD) over and including a layer of wall care putty 2mm thick complete all as specified and directed.

M&L broken stone aggregate of hard core gauge n.exc 63mm in plinth protection deposited, spreaded and levelled in layers n.exc 15cm thick watered and rammered to true surface all as spd and directed

M&L for 75mm thick PCC (1:3:6) type C-1 (using 20mm graded crushed stone aggregate) as in plinth protection laid in panels and joints filled with mix of bitumen 85/25 grade and sand (1:2) by weight, finished the surface even and smooth using extra cement etc complete all as specified and directed.

M&L for PCC (1:2:4) type B-0 (using 12.5mm graded crushed stone aggregate) as in coping, benching etc and like including weathering, slightly rounded or chamfered angles and throating, as directed finished the surface even and smooth without using extra cement etc complete all as specified and directed.

M&L for 25 mm thick floor in PCC 1:2:4 type B-0 (12.5mm graded crushed aggregate) as in sub base of floor, complete all as specified and directed.

M&L for Non-skid ceramic coloured rectified edges tiles (joint free) 8mm thick area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm in floors etc, set & jointed in neat cement slurry and pointed in coloured epoxy grout to match laid over and including 15mm thick screed bed or bedding layer of cement mortar (1:6), including dismantling existing floor tiles of any type and pattern including cement mortar bedding and removing debris/tiles out off the premises, etc complete all as specified and directed.

M&L for Non-skid ceramic coloured rectified edges tiles (joint free) 8mm thick area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm in skirting/dado/riser of steps etc, set & jointed in neat cement slurry and pointed in coloured epoxy grout to match laid over and including 10mm thick screed bed or bedding layer of cement mortar (1:4), including dismantling existing floor tiles of any type and pattern including cement mortar bedding and removing debris/tiles out off the premises, etc complete all as specified and directed.

M&L for coloured machine pressed ruber moulded precast concrete interlocking (red/yellow) paver block, any shape and size having glossy finish of 60mm thickness M-35 grade grey cement and pigment over and including 75mm thick PCC 1:4:8 type D-2 (using 40mm aggregate) over and including 50mm sand sushioning complete all as specified and directed including demolition of existing paver blocks complete all as specified and directed.

M&L for 20mm thick Machine cut kota stone slab flooring over and including 20mm thick screed bed in CM 1:4 base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete complete all as specified and directed.

Dismantling of existing framed trusses of span n.exc 10mtr and refixing of trusses on base plate anchore with holding down screw including two coats of synthetic enamel paint complete all as specified and directed. Note : Screw bolts shall be measured and paid separately under relevant item of this schedule.

Dismantling of rolled mild steel as in tubular purlins, rafters etc and refixing of purlins, rafters on trusses including necessary cleats etc. including two coats of synthetic enamel paint after preparation of old steel surface complete all as specified and as directed.

S&F steel works in tubular truss special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS-1161-1979 GRADE st-240 incl to coats of synthetic enamel paint over one coat of red oxide, complete all as specified and directed.

Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 45.0cm long, 16mm diameter of shank, complete all as specified and directed.

M&L steel iron base plate plugs, bolts and screws of Fe-410-W(Gde-E-250 Quality-A) complete all as specified and directed

Dismantling of Asbestus cement sheet (Corrugate, semi corrugated) as in roof covering complete all as specified as directed

M&L for Pre-painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling of existing sheets of any type and description complete all as specified and directed [Note : The colour of sheet shall be as approved by GE].

M&L for Pre-painted galvatume aluminum zinc coating GI based plain steel sheet 0.50mm thick having tensile strength of 550 Mpa as in ridge fixed with self tapping screws including dismantling of existing sheets of any type and description complete all as specified and directed [Note : The colour of sheet shall be as approved by GE].

M&L for false ceiling of 9.5mm thick gypsum tiles (600x600mm) laminated with PVC film on the face side & metalised polyester film on the back side with all four edges sealed with PVC film (shade either plain white or crack) in a grid size of 605x605mm from manufacturer M/s Saint Gobain or equivalent of Armstong/Everest including taking down existing ceiling board of any type/pattern with GI frame work with grid size of 605 x 605mm for seamless ceiling comprising of GI perimeter channel 0.5mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre with GI Hangers 4mm dia (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3 mm size 60mm long and expansion hold fasteners 12.5mm ida, 40mm long incl taking down existing grid complete all as specified and directed. Note : Invoice from company's authorised dealer shall be submitted with material by the contractor along with dealership certificate. Certificate of genuineness from the manufacturer shall also be submitted by the contractor before getting the materials passed from the department

M&Lfor 20mm thick Machine cut kota stone slab as in steps, riser of staircase, skirting, dado and including 10mm thick screed bed in CM 1:3 base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete complete all as specified and directed.

M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for Mild steel TMT bars 6mm to 8mm dia, cut to length, bent to shape required, including cranking, bending, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed

M&L for providing precast reinforced cement concrete (1:1.5:3) type A-1 (using 20mm graded crushed stone aggregate) as in beams, cantilevers, bressummers, lintel over 1.5m span and the like including demolition of existing reinforced cement concrete complete all as specified and as directed.

Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, opening in concrete walls, floor and roofs n exc 20cm wide and sides of RCC/PCC bands in walls, harizontal or sloping and similar work exc 10cm but n exc

Taking down carefully unserviciable/ damaged copper/aluminium surface (batten/coduit or casing caping) point wiring any length for light/fan/socket or power including unscrewing from board (fitting and fixture such as switches, sockets, ceiling rose, lamp holders, brackets, pendent, regulators, sockets, Bracket /sketch fitting etc ) and removing material from site and making good to the disturbed surface to match with existing finish complete all as specified and directed.

M&L for Modular Point wiring using FRLS PVC insulated unsheathed /multi stranded copper conductor cable 1.5 sqmm including 1.5 Sqmm FRLS PVC insulated unsheathed copper conductor earth wire drawn through and including concealed PVC conduit of appropriate size not less than 20 mm dia and 1.8 mm thick including all fittings viz tees, bends, junctions box and approved make sunken modular metal flush gang box and suitable support frame and cover plate (inner/outer) of required modules for mounting modular switches/ sockets etc, connecting earth including cutting groove for concealed wiring, making good to disturb surface of wall/floor with cement mortar and finishes to match existing including connection of cable with MCBs or bus bar shall be done through proper size copper/brass thimble of pin/u type etc (conduit shall be fixed on surface of ceiling with necessary saddles where concealing of conduit is not feasible), for light/fan/bell point complete all as specified and directed. (Note : Modular switch/bell push/fan regulator etc shall be measured and paid separately under respective items.)

All as per Srl item No. 47 above but for one socket (3 pin) controlled by one switch, single pole, 5 Amp, 240 volts on the same board complete all as specified and directed.

All as per Srl item No. 47 above but for one switch socket (3 pin) controlled by one switch, single pole, 5 Amp, 240 volts on independent board complete all as specified and directed.

M&L for Modular point wiring using FRLS PVC insulated unsheathed /multi stranded copper conductor cable 2.5 sqmm including 2.5 Sqmm FRLS PVC insulated unsheathed copper conductor earth wire drawn through and including concealed PVC conduit of appropriate size not less than 20 mm dia and 1.8 mm thick including all fittings viz tees, bends, junctions box and approved make sunken metal flush gang box and suitable support frame and cover plate (inner/outer) of required modules for mounting modular switches/ sockets etc, for one 6 pin socket outlet 15 amps, Modular multi purpose independent point controlled by 15 Amp switch Single pole , one way , 240 volts connecting earth including cutting groove for concealed wiring, making good to disturb surface of wall/floor with cement mortar and finishes to match existing including connection of cable with MCBs or bus bar shall be done through proper size copper/brass thimble of pin/u type etc (conduit shall be fixed on surface of ceiling with necessary saddles where concealing of conduit is not feasible), for light/fan/bell point complete all as specified and directed. (Note : Modular switch/bell push/fan regulator etc shall be measured and paid separately under respective items.)

S & F modular switch piano type flush button one way, single pole 5 Amp one module complete all as specified and directed. Make : Legrand Cat Part No 673000/Crabtree Cat Part No ACMSXXW101/Anchor Roma Cat Part No 66111.

S&F modular switch Socket outlet, 2 in 1, 3 pin, 5 Amps, flush type (ISI Marked ) AC 230 volts, etc complete all as specified and directed. Make : Crabtree /Legrand / Schneider /Siemens/Anchor Roma

S&F modular switch Socket outlet, 2 in 1, 5 pin, 5/15 Amps, flush type (ISI Marked ) AC 230 volts, etc complete all as specified and directed. Make : Crabtree /Legrand / Schneider /Siemens/Anchor Roma

S&F modular Switch piono flush button single pole one way 15 Amp (ISI Marked ) AC 230 volts, etc complete all as specified and directed. Make : Crabtree /Legrand / Schneider /Siemens/Anchor Roma

S&F Ceiling rose polycarbonate isolated body surface Bakelite, not less than 65 x 50 mm, three terminals, AC 230 volts etc, complete all as specified and directed. Make : Havells Cat Part No Reo/Cona Cat Part No 9246/GM Cat Part No 8224

S & F Fan regulator modular step type suitable for 1200/1400mm sweep ceiling fan hum free, 120W- 2 module including necessary connections complete all as specified and directed. Make : Legrand Cat Part No 673028/Crabtree Cat Part No ACARFHW005/Anchor Roma Cat Part No 66502.

S&F Lamp holder insulated body with back plate suitable for batten fitting including 14W LED lamp of approved make and cat part and PVC Round/Square block etc complete all as specifeid and directed.

S &F in replacement the Bulk head light fitting LED type 10 watt complete with 10 watt LED and having IP-63 protection and fixing on wall/ceiling complete with all accessories and including connecting up with ceiling rose with & including PVC insulated and overall sheathed flexible copper conductor cable and including 3 core 0.50 Sqmm complete all as specified and directed.

S&F in replacement white poder coated CRCA box with decorative end cap batten alongwith LED T8 tubular lamp 20W linear with extruded aluminium/pc body and PC diffuser and inbuilt driver, 230 volts wall mounted complete with all accessories internally pre wired and including connecting up with three core twisted flexible copper conductor cable of suitable size including taking down old UNSV tubelight fitting any type. Make of batten-Crompton batten Cat Part No DMLN1LT8-16 and LED tube Rod Cat Part No LTT8-20 or Make - Equivalent in Wipro, Halonix

Notes : for Srl item No 57 to 59:- 1. Driver shall be potted antivibration type. 2. LM-79 and LM-80 test report with 1 Lakh burning hours LED life from NABL lab shall be povided. 3. CRI (Colou Rendring Index) of fixture shall be > 70. 4. CCT (Colout Correlated Temprature of fixture shall be 5700K ± 300 K. 5. System Lumen Efficacy shall be > 100Lm/W 6. 10 KV separate Surge Protection shall be provided as a part of fitting. 7. 5 years gurantee shall be provided by contractor suppoted by OEM covering all parts of luminaire. 8. Lenses shall be Modular Type. 9. PCB used shall be MC PCB type 10. The defect liability period of LED light shall be 05 years from the certified date of completion & the Contractor shall replace / repair the defective fitting within 07 Days after handing over to Contractor for replacement / repair 11. CA No shall be written on each fitting before installation. 12. The name of manufacturer to be embossed on the fitting. 13. The fittings shall have arrangement so that maintaince required, if any can be carried out from Top cover.

Supply, laying, testing and commissioning for 1100 volt grade XLPE insulated heavy duty cable, 16 sqmm 2 core, strip armoured with aluminium stranded conductor overall PVC sheathed laid in trenches including taking down existing cable & bricks complete all as specified and directed. Note : Excavation & Earthwork shall be measured and paid separately.

Excavation in trenches n exc 1.5m wide and n exc 1.5m in depth for foundation etc (for cable, pole stay manhole etc), in any type of soil and getting out, complete all as specified and directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc. 25cm thick, etc complete all as specified and directed.

Removing excavation material n exc. 50m & deposited where directed at a level n exc. 1.5m above the starting point etc complete all as specified and directed.

M&L for well burnt bricks, laid flat (old size) sub class B designation 75 for cable protection complete all as specified and directed

M&L for tube, light grade galvanised with all fittings laid in trenches/through wall/under road or floor of 40 mm bore. Make : TATA/Jindal/Ravindra

Taking down ceiling fan of any sweep & size and refix in same position after overhauling including minor repairs by replacement of capacitor, safety pin, cap, nuts & bolts etc and making connection using 3 core, 0.50 Sqmm PVC insulated and overall sheathed flexible copper conductor cable from ceiling rose to fan, including testing to ensure efficient functioning including application of one coat of synthetic enamel paint by spray painting & rewriting number complete all as specified and directed.

M&L for sand filling in trenches dry and clean sand unwashed including punning around cable for protection of under ground cable complete all as specified and directed (Note : Pannel thickness shall be measured & paid)

S&F MCB single pole (SP) 240 volts, 6 to 32 Amps, 10KA (C-series) , complete all as specified and directed. Make : Legrand/Schneider/Hager

S&F MCB single pole neutral (SPN) 240 volts, 63 Amps, 10KA (C-series) complete all as specified and directed. Make : Legrand/Schneider/Hager

S&F sheet metal enclosures for SPN DB's with double glazed door for incorporating MCB's, IP-43, 12 way with 200 amps rated busbar, 240 volts, as per IS-8623 all as specified and as directed. Make : Legend, Hanger, Anchor.

M&L for earthing complete with galvanised steel earth plate electrode, 600mm x 600mm x 6mm thick, buried directly in the ground (earth pit not less than 2.25m deep below normal (ground level) with top edge of the plate not less than 1.50m below ground level connected to galvanized iron wire 4mm dia as earth lead by means of bolts, nuts and washers of GI up to test point, HDPE pipe 15mm bore as protection pipe, GI watering pipe 20mm bore light grade with funnel and wire mesh, charcoal and salt, 40mm thick pre-cast RCC (1:2:4) type B-0 (Nominal mix) cover reinforced with XPM (weighing n.less than 4 Kg/Sqm) with suitable steel handle, and angle iron 40X40X3mm frame and chamber of PCC (1:3:6) type C-0 (including earth work in any type of soil, removal of surplus soil to a distance n.exc.50m) and connecting, testing on completion, all as shown on electric plate No. 03 of SSR-2009 Part-I, complete all as directed. Notes: 1. Earth lead & protection pipes length upto & including 7.50 metre is deemed included in unit rate quoted by the contractor. 2. Earth filling shall be done by vegitable soil. 3. Soil shall be free from stone, boulders, aggregate, gravels .

M/S J N TRADERS

M/S INDIAN ELECTRICAL

Ms Dalip Kumar and Co.

M/S CANTILEVER ENGINEERS

KULBHUSHAN AGGARWAL