PROVN OF FLAG STAFF FUEL DEPOT AND PROVN OF JEFFERY WALL AND CONCRETE STAIR CASE AT CGDHQ-9 DIGLIPUR UNDER GE (SOUTH) DIGLIPUR

Amount

Excavation in trenches not exceeding 1.50M wide and not exceeding 1.50M depth for foundation etc not exceeding 10 Sqm on plan and not exceeding 1.50M in depth and getting out in any type of soil complete all as specified and as directed.

Surface excavation not exceeding 30cm deep averaging 15cm deep and getting out in any type of soil complete all as specified and as directed.

Excavation over area not exceeding 1.5 m deep and getting out soft and loose soil complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm complete all as specified and as directed.

Removing excavated material not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point in soil complete all as specified and as directed.

M&L for hardcore of broken stones of gauge not exceeding 63mm deposited, spread and levelled in layers not exceeding 15 cm thick watered and rammed to a true surface including rolling with power roller complete all as specified and directed.

M&L for plain cement concrete (1:4:8) type D2 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed.

M&L for precast cement concrete (1:3:6) type C1 (using 20mm graded stone aggregate) in block masonary with solid blocks exceeding 10 cm width set in cement mortar (1:4) complete all as specified and as directed.

M&L for RCC (1:2:4) type-B1, (using 20 mm graded stone aggregate) as in coping and similar work with & including necessary form work to receive fair finish complete all as specified and directed

S&F for mild steel TMT bars 6mm dia and over upto and including 10mm dia, cut to length, bent to shape required, including cranking, bending spirally for columns hooking for columns hooking ends and binding with and including mild steel wire ( annealed ) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

Use and waste for Form work rough finished, flat to sides and soffits of floor or roof beams as in copings etc complete all as specified and as directed.

Use and waste for Form work rough finished to edges of concrete, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizon tal or sloping and similar work exc 10cm but not exceeding 20cm complete all as specified and as directed.

M&L for providing precast cement concrete (1:2:4) type B0 set in cement mortar (1:4), louvres and jallies, 25mm thick (measured solid) including all mouldings complete all as specified and as directed.

M&L for chequered designer tiles 300mm x300mmx 25mm size set and pointed in neat cement slurry and pointed in coloured cement to match over and including 20 mm thick cement mortar (1:4) Screed bed complete all as specified and as directed.

M&L for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, incl fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc of required size, on the top of floor or the side of waist slab with suitable arrangement as in sides of steps complete all as specified and as directed.

M&L for rendering 10mm thick in cement mortar (1:4) on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed.

M&L for preparation of new plastered surfaces on walls and applying two coats of cement based paint over primer coat paint complete all as specified and as directed.

M&L 75 mm thick Cement concrete (1:4:8) Type D-2 (using 40 mm graded stone aggregate) in foundation and mass concrete complete all as specified and as directed.

M&L for PCC (1:2:4) Type B1 (using 20mm graded stone aggregate) 40mm thick in floors finishing surface even and smooth without using extra cement complete all as specified and as directed.

M&L for PCC (1:3:6) type C-2 (using 40mm graded stone aggregate) as in foundation etc complete as specified and as directed.

S&F for 80 mm dia GI pipes Heavy Class in flag post or poles including pulleys/Hooks for flag hoisting etc complete all as specified and as directed

S&F for 65 mm dia GI pipes Heavy Class in flag post or poles including pulleys/Hooks for flag hoisting etc complete all as specified and as directed

S&F for 50 mm dia GI pipes Heavy Class in flag post or poles including pulleys/Hooks for flag hoisting etc complete all as specified and as directed

M&L for 20mm thick Granite (of any type) tiles machine cut, in skirting/ dado laid over cement screed and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and as directed.

SUMAN (BID ID -3113187)

Binod Hawlader (BID ID -3125194)