REPAIR TO GALVALUME SHEETS ROLLING SLIDING SHUTTER ALUMINIUM UPVC DOOR WINDOW OTHER MISC BR WORKS IN OTM ACCN OF 505 ABW UNDER AGE BR I OF GE NORTH DELHI CANTT 10

Amount

Removing of existing water proofing membrane, damage plaster, vegitation/plants, PCC, Tar-felt, loose particles and all foreign materials over the roof and shifting the debris from site to out-side area as directed. Cleaning the surface & removing of dust, existing paints from wall & roof surface, finding visible crack, Making V-Groove by machine on crack area, providing & applying polymer bonding agent (1:2) & filling those grooves by modified cement & sand mortar (1:4) with WPM liquid (5% by wt. of cement) complete all as specified and directed.

Waterproofing coating-Providing & applying 1st coat WPM with brush/roller after mixing with cement at 1:1.5 (1 part of WPM and 1.5 part of cement & 2nd coat with an interval of 10 to 12 hrs by brush or roller to get average thickness of 1.5mm. The system will be allowed to air cure for 7 days covering including parapet both side wall. Note - The work is to be executed through authorised applicator.

Hacking out old broken glass ( any thickness , size, quality, or description) from metal frame glazed with putty or fixed with beads/ clips

S&F rough cast, wired fibre glass sheet exc 6mm thick but n.exc 6.40mm thick fixed with flat iron and nut bolts in squre/rectangle & as required exc 0.75sqm but n.exc 1.00sqm in each pane fixed with necessary securing arragement as previons at height upto 15m complete all as speccified and direccted.

S&F 3mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqm in each pane complete(steel or wooden metal) all as specified.

Dismantling wrought iron or mild steel work of any description not otherwise provided complete all as speccified and direccted.

Dismantling timber scantlings 40 sq. cm and over in section, in frame work at any position complete all as specified and directed.

S&F structural steel work for rolled sections as in main and cross beams, hips, jacks, rafters, purlins, runnings, rails and guides for sliding doors fixed with angles, cleats or other conneccting plates grade FE-410-W at working height 15m complete all as specified and directed.

M&L for two coats of synthetic enamel paint on old steel surfaces of any description, exc 10cms in width or girth, including preparation of surfaces, complete all as specified and directed.

M&L for preparing new surfaces of steel of any description, over 10cm width or girth not other wise described and appliying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome primer, complete all as specified and directed.

Dismantling of Asbestos cement (corrugated, semicorrugated, etc) sheets as in roof coverings complete all as speccified and direccted.

S&F prepainted galvalume aluminium zinc coating GI based corrugated steel 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screw as in roof complete all as spd .

Dismantling of plain or corrugated steel/ fibre sheeting of any guage as in roof covering including ridges/gutters etc of any description straight or curved at height upto 15 mtr complete all as specified and directed.

S&F 0.50mm plain, pre-painted galvalume aluminum zinc coating GI based Plain steel sheet galvanised, mild steel sheeting, in ridges, hips, valley gutter, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 and welded or soldered joints are provided as requried complete all as specified and directed.

S&F 2mm thick PGI sheet having 275gm of zink coating per sqm both sides in valley gutter, dripper, or as rain water pipe, straight flashing with 100mm overlap made to required shape & size incl welding or revetting and fixed in position and working height upto 15m complete all as specified and directed.

Taking down eaves gutters and rain water pipes (any size or pattern), including all fitting, head, shoes, bend, swan-nacks etc., including cleaning or refixing or removal to store complete all as specified and directed.

S&F steel rolling shutters in repair, gear operated type with bevel gear box and crank shaft and handle, ball bearing, helical spring as specified including top covers anchoring rod, hasp & staple errected in position make it functional complete thickness of laths 1.25mm complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from frames) area not exceeding 1.50 Sqm each, including cutting holes for taking out holdfasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out holdfasts shall be finished identical to existing finish without any extra cost to Govt ), complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from frames) area exceeding 1.50 square metre and not exceeding 4.0 square metre each, including cutting holes for taking out holdfasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt.), compete all as specified and directed.

S&F powder coated aluminium window made of aluminium tubular frame and double shutter (glazed and gauzed shutter) of section 63.50 x 38.10 x 1.60mm and style fixed or openable horizontal and vertical member including aluminium beading rubber gasket of aluminium fittings such as tower bolts, handle stay and rod and hinges 5mm thick glass etc complete all as specified and directed. Note :- Fixtures / fittings of window shutter including glass and wire mesh is deemed to be included in quoted rate against this item.

S&F in repairs powder coated aluminium anodised hollow section door frame and shutter (swing type) openable and top rail, style of section 47.62 x 44.45 x 1.60mm and lock rail, bottom rail of size 101 x 44.5 x 1.6mm including jointing cleats, snap beading, glass/ novapan board, gasket for fixing glass/board in panel including 1 door closer (hardwyn), 2 Nos dish type handle, hinges, tower bolts -02 Nos of size 150mm in each leaf and screws complete all as specified. Note :- Fixtures / fittings of window shutter including glass and wire mesh is deemed to be included in quoted rate against this item.

S&F anodised aluminum alloy powder coated standard hollow section for window two tracks including aluminum frame/ chowkhat with following specification including anodised aluminum snap beading, channels, 5mm thick tinted glass, glazing clips, joint cleats, rubber gasket etc and other accessories complete all as specified and directed. (a) Frame of section :- 83.50mm x 44.50mm x 1.60mm thickness. (b) Sliding window section (channel):-40mm x18mm of 1.20mm thickness with locking arrangement. Note:- (1) The rate also included the cost of cutting, waste and making good disturbed surface matching with existing surface and finish as directed. (2) Minimum thickness of powder coating shall be 50 micron. (3) Make for PVC sheet :- Sintex, Rajshree & Tata.

S&F casement windows with net & MS grill single or multi shutter turn window are made out of UPVC multi-cavity frames sections of 60 x 60 x 2.5mm suitably reinforced and double mult-shutters division are made by using sash mullion having 50 x 64 x 2.5mm multi-cavity UPVC section, suitably reinforced with GI and shutters are made out of 50 x 85 x 2.5mm UPVC section, reinforced and welded in corners with EDPM gaskets provision for glass and for air tight at frames and outer side of shutter with single glaze window shutters using suitable glass bead with perfect hardware like hinges handles, stays etc complete. Mosquito mesh shutter is made out of UPC extruded section of 61 x 27 x 2mm with GI channel of 1.2mm thick, welded in corners. Stainless steel wire mesh (Mosquito net) to be fitted in shutter with proper required accessories like hinges, MS grill of 12mm round or square bar are inserted in main frame as guard bar & screwed by hidden screwing system with powder coating and filled the gap between wall and frame with weather proof silicon sealant over backer rod of required size and of approved quality etc complete all as specified and directed. Note:- The cost of float glass for glazed shutter of thickness not less than 4.00mm and wiremesh for gauge shutter with stainless steel wire mesh 0.36mm dia with aparature 1.4 mm is deemed to be included in quoted rate against this item. No extra payment will be made separately. Make/Manufactruer:- Fenesta/ Winkraft/ Yashpoly/ Duraplast/ Accura (Accucel).

S&F UPVC ventilators made out of UPVC multi-cavity frames sections of 60 x 60 x 2.5mm UPVC section, reinforced and welded in corners with TPE gaskets provision for glass and for air tight at frames and outer side of shutter with single glaze window shutters using suitable glass bead with perfect hardware like hinges, handles, stays etc complete. with MS grill of 12mm thick round/square shape bar duly painted with oil paint over a coat of red oxide are fabricated as per manufactruer and installed in UPVC frame section of 35 x 35 x 2mm by drilling and surveying system filled the gap between wall and frame with weather proof silicon sealant over backer rod of required size and of approved quality complete all as specified and directed Note - The cost of glass panes and stainless steel wire mesh, and MS Grill etc is deemed to be included in quoted rate against this item. No extra payment will be made separately. Make/Manufactruer:- Fenesta/ Winkraft/ Yashpoly/ Duraplast/ Accura (Accucel).

Removing foreign materials i.e silt, sludge, soil from valley gutters, in any pipe of any dia in any position without disturbing the structure of valley gutter & sheets, working height upto 15m and thrown away from MOD land complete all as directed

M&L for WPC acoustic wall paneling for indoor/outdoor wall 100% nontoxic, non feraldelyers, water proof, termite proof, anti UV using necessary SS clip/fixing arrangement/including taking down old prelaminated particle board complete all as directed

Taking down cement or cement lime plaster on brick or stone walls/ceiling etc including raking out joints, hacking for key, scrubing down with water etc complete all as specified and directed.

Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stone work and precast articles, complete all as specified and directed.

M&L for brick work with sub class 'B' bricks, straight or curved on plan on exceeding 6m mean radius, using old size brick, built in cement mortar 1:6, complete all as specified and directed.

M&L for rendering 15mm thick on brick work or concrete surface in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15mm thick on brick work or concrete surface in cement mortar 1:4 including water proofing compound finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 10mm thick on brick or concrete surface as in ceiling in cement mortar 1:3 finished even and smooth without using extra complete all as specified and directed.

M&L preparation of newly plastered surface on walls and applying two coat of oil bound distemper over 2mm thick wall care putty complete all as specified and directed.

M&L preparation of newly plastered surfaces of walls and applying two coats of cement base paint complete all as specified .

M&L for preparing newly plastered surfaces of ceilling and applying three coats of white wash complete all as specified and directed.

M&L for 3D block/river rock/cliff stone or as approved by Engr-in-charge as in dado/vertical surface of size 300mm x 600mm x 8 to10mm thick set and jointed in neat cement slurry and pointed in coloured cement to match the surface over and including backing coat of cement plaster in CM 1:4 etc including dismantling floor, hearth or wall tiling including cement mortar bedding but not backing, removing serviceable tiles to store and rubbish off the premisescomplete all as specified and directed.

Providing and fixing 4mm thick aluminium composite panel (ACP) exterior grade (0.5mm PVDF coated Aluminium skin on top & bottom plus 3mm thick polyethylene core) on/all-round RCC/Brick column/ wall/ Fascia's/ M.S. section/ Aluminium section structure/ dead walls/under side sky light upto all height in required colour/pattern & panel size as (Area of panel shall not more than 0.60Sqm as per drawing fixed on aluminium extruded standard tubular section of size 38 x 25 x 1.6mm of approved make (Jindal/ Hindalco/ Indalco) conforming to IS;733 and IS; 1285, fixed at 600m center to center with rawl plugs and screws or with fixing clips or with expansion hold fasteners Aluminium sections shall be smooth rust free straight mitred and jointed mechanically wherever required including cleat angle CP brass/stainless steel screws, with 12mm (wide) x 20mm (deep) groove in joints or panels including filling the joints with weather silicon sealant of Dow coming 789 or equivalent of approved colour inacp ACP, weather sealant structural sealant/adhesive tape, masking tap, primer/ gasket/ foam/ scaffolding/ cluding 10mm dia backer rod, The rate shall include cost of ACP Panel, subframe of aluminium section for fixing of ACP, weather sealant structural sealant/adhesive tape, masking tape primer/ gasket/ foam/ scaffolding/ Aluminium cleats with screws complete including making openings as required at site like electical fittings, recess for pipe etc, all necessary tools and plants, scaffolding and as per manufacturer's technical specifications, including dismantling of old sheet complete and as per the direction of the Engr-in-Charge (Surface area of aluminium composite panel shall be measured for payment.

M/S AADI ENTERPRISES

DEEP ASSOCIATES

ANSH VANSH CONSTRUCTION COMPANY

Paradise Interior

Rohan Construction Company

V M CONSTRUCTION

M/s Durga Traders

Keshav Brothers