Repairing and Replacement of various work in Canteen of Dr. R. N. Cooper Mun.

Amount

Repairing & Replacement of various work in Canteen of Dr. R. N. Cooper Mun. Gen. Hospital.

Manufacture, Supply and Installation of SS Open table ofsize 1500 L x900 D x900 H mm. which is made up of 1.2 mmthick S.S. 304 ERW pipe Which has 4 vertical legs withlevellers. Horizontal members provided for the support ontop and at bottom. Bottom horizontal members provided 150mm above the floor level with Pipe section 50X50X1.2mmthick Unit has front cover panels unit with semi mat finishetc. Above table is provided with 15 to 19 mm thickCeramic/Granite work top. Complete as per approved andshade approved from user department and as directed bythe Engineer In-charge.

Steel Rack of size 1800mm high X 900mm wide X 450mm deep

VENEER FINISHED Add for 4mm thick decorative veneer (Type- I) conformingto IS 1328 BWP Grade with 3 coats of matching French polishas directed.

DOOR SHUTTER IN PARTITION Providing and fixing block board door shutter of 35 mmthick and 2100mm in ht. with laminate finish on bothsides of approved shade Including fixing the same usingbest adhesive mortise lock tw beading all around to theshutter all fixtures fastening with consealed door closerand two coats of approvedsynthetic enamel. paint to allremaining sides of wood work etc. complete as per detaileddrawings and as per the instructions of the engineer incharge.

DOOR FRAME Frame Type F2 Providing and fixing 1st quality Burma T.W.door frame ofsize 75 x 150mm with required groove andchamfer IncludingM.S.hold-fast of size and make. Door Type D5-ED as per architects detailed drg. And design and asinstructed by the Engineer- In-charge.

DINNING TABLE-6 Seater 1600mm (L) x 800mm(W) x 750mm (H))Dining table ofOverall S.S Structure top to be Of s.s 18 SWG 304, Grit. Under Structure to be Verticle poles of 50 mm Dia and topsupporting frame and Bottom Structure to be 50 x 50 mmSquare tube.

DINNING TABLE - 4 Seater Providing and supplying 4 Seater table Membrane size shallbe 900 x 900 x 750 LxBxD Height mm. Top shall be 25 mmthick base material shall be 25mm MDF board PVCMembrane foil on top 8 x 2 mm deep groove on centre of thetable as graphics Specially profiled edge to prevent stripingof foil & comfortable touch, Brown laminate on bottomsurface. The Understructure shall be having bend pipestructure of MS powder coated. Pipe dia 38 mm Dia, 2mmthick and it shall be fitted with top by SS machine screws Legs shall be of SS and 38 mm dia. pipe legs are fixed withinderstructure and table top. Glide shall be of Plastic foxedat the understructure to prevent the damage of table topduring stacking

Manufacture, Supply and Installation of "A" Type module as per approved drawing, of size is 1200mm x 600mm x872mm. Which is completely made of 1 mm thick GI(Galvanized iron) Material with Minimum 120 gsm of Zinkcoat on raw sheet. The Module has two vertical Flask shapeside connected with horizontal members for the support atthe bottom of storage cabinets. 40mm x 40mm C channelworktop supporting frame is placed on top. The storage unitis provided below the worktop with frame of sizes as 550mmW x 400mm D x 600mm H (Qty 2nos). Storage unit has adjustable shelf inside. The complete unit is pre-treated with 7 tank procedure. Coated with Epoxy based powder has Anti bacterial and Antivirus property with 50 to 70 micron filmthickness. Also anti corrosion coat applied at welded cornerafter pre-treatment Installation as an additional corrosionprotection. All hardware's like hinges and handle provided of "Polyamide" non rusting material. Doors provided withLock and keys etc. Above table is provided with 15 to 19 mmthick Ceramic/Granite work top. complete as per approvedand shade approved from user department and as directedby the Engineer In-charge.

Manufacture, Supply and Installation of Storage unit in between in betn Units with SS sink and laboratory grade single way tap. Made Of size 600mm x 600mm x 872mm, Which is completely made of 1 mm thickG (Galvanized iron) Material with Minimum 120 gsm ofZink coat on raw sheet. The Module has two vertical Flaskshape side of existing A/B type modules connected withhorizontal members for the support at the bottom of storagecabinets 600mmx600mmx400 D (gty 1). with 40x40 mm "C"Channels for supporting of granite and cabinets. Andprovided with SS 304 sink of size 450mm x 385mm with bowl size 410mm x330 mm x 150 (Sink size may vary as persite conditions). Laboratory brass faucet provided withsingle neck etc. Complete unit is pre- treated with 7 tankprocedure. Coated with Epoxy based powder has Anti bacterial and Antivirus property with 50 to 70 micron filmthickness. Also anti corrosion coat applied at welded cornerafter pre-treatment as an additional corrosion protection. Allhardware's like hinges and handle provided of "Polyamide non rusting material. Doors provided with Lock and keysetc. Above table is provided with 15 to 19 mm thick Ceramic/Granite work top. Complete as per approved and shade approved from user department and as directed bythe Engineer In-charge.

Manufacture, Supply and Installation of Reagent rack unit of Size 1200 x 300x600 mm.is consisting of shelf systemabove worktop with 1mm thick G.I steel. 2 Nos Side supportare made of 50 mm thick box type construction. The shelfhas cavity to hold worktop and avoided metal to chemicalcontact. Provided with Electrical switch socket (15/5 AMPsocket and plano switch with approved make) on any oneside etc. Complete unit is pre-treated with 7 tank procedure.Coated with Epoxy based powder has Anti-bacterial andAntivirus property with 50 to 70 micron film thickness. Alsoanti corrosion coat applied at welded corner after pre treatment installation as an additional corrosion protection. Every shelf has 15 to 19 mm thick Ceramic/Granite worktop. Complete as per approved and shade approved fromuser department and as directed by the Engineer In-charge.

Manufacture, Supply and Installation of Open table with sink. Size of table is size 1500 L x900 D x900 H mm, made upof 1.2 mm thick GI (Galvanized iron) ERW pipe. Which has 4vertical legs with levellers. Horizontal members providedfor the support on top and bottom. Bottom horizontalmembers provided at 150 mm above floor level with Pipesection Size 50X50X1.2mm thick. It has removable coverpanel at front. The Unit is carrying sink with overall size460mm x 385mm and bowl size 410mm x 330 x150mm madeof SS 304 (Sink size may vary as per site conditions). Laboratory brass faucet provided with single neck etc. Complete G.1. unit is pre- treated with 7 tank procedure.Coated with Epoxy based powder has Anti-bacterial andAntivirus property with 50 to 70 micron film thickness. Alsoanti corrosion coat applied at welded corner after pre treatment as an additional corrosion protection. Above tableis provided with 15 to 19 mm thick Ceramic/Granite worktop Complete as per approved and shade approved fromuser department and as directed by the Engineer In-charge.

Manufacture, Supply and Installation of SS Open table ofsize 1500 L x900 D x900 H mm. which is made up of 1.2 mm thick S.S. 304 ERW pipe Which has 4 vertical legs withlevellers. Horizontal members provided for the support ontop and at bottom. Bottom horizontal members provided 150mm above the floor level with Pipe section 50X50X1.2mmthick Unit has front cover panels unit with semi mat finishetc. Above table is provided with 15 to 19 mm thickCeramic/Granite work top. Complete as per approved andshade approved from user department and as directed bythe Engineer In-charge.

Providing and fixing in position two track aluminum window of extruded modular andanodized aluminum sections of approved make and of size 61.85 mm x 45.5 mm x 1.3mm thk (wt 1.055 kg/Rm) for bottom, 61.85 mm x 31.75 mm x 1.3 mm thk. (wt 0.659kg/Rm) for top & sides, mounted on anodized aluminum rectangular frame of size 63mm x38mm x 2.0mm(1.054). The shutter comprising of bearing bottom and top of size 40mm x18 mm x 1.25 mm thk (wt. 0.417 Kg/Rm) Interlocking section of size 40mm x 26,7 mm x1.10 mm thk. (Wt. 0469 kg./Rm) and hand sides of 40mm x 18mm x 1.25 mm thk (wt.0.417kg/Rm) with 5 mm thick plain / frosted tinted glass fixed in shutter includingapproved quality neoprene gasket, fixtures, fastenings and accessories like PVC rollers, approved quality neoprene gasket, fixtures, fastenings and accessories like PVC rollers, PVC weep holes, locks, handles etc. complete as directed by Engineer In Charge

Light/Fan/Ex. fan Points

2/3 Pin Independent Plug (IP)

WASTE COUPLING: JAQUAR: NO. 705

P/f Hindustan make white glazed earthen ware, wash basin constellation

Providing and fixing stainless steel sink 600 mm x 450 mm and 200mmdeep including 32mm dia. galvanised iron waste pipe, 3 dia. C.P.brass waste coupling, one C.P. brass screw down tap, caste ironbrackets, rubber plugs with chain etc. complete.

For plastered wall surface

Providing & fixing FULL HEIGHT BOTH SIDE 19.80 Sam LAMINATED PARTITION at required location having height more than 2.8 meter & minimum 77 mm thick made by using 50 x 50 mm (finished size) approved quality seasoned TW section framing at 600 mm center to center, covered with 12 mm marine ply generally confirming to 1.5.303/1.5.710- 1980 on both sides. The partitions shall be finished with 1.5 mm thk.approvequality laminate matt/suede/fine line finished lamination pattern

Removing and refixing existing door or window with frames and shutters, making good the damaged brick work and applying 3coats of Syn. Ena, paint

SHREE HERAMB CORPORATION (BID ID -5996186)