SPECIAL REPAIRS TO BLDG NO P 28 OF SMQ IN DC IV AREA AT 23 ED AF STN AVADI

Amount

Taking down wooden chowkats or frames exc. 1.5 sqm but n.exc 4 sqm each along with shutters (without taking off shutters from the frame)etc., complete all as directed.

Taking down wooden shutter only of any description exc 1 and n.exc 2 sqm each all as directed.

Supply and fix second class hard wood plain, solid, straight, chowkats and frames, wrought framed rebated on the solid, rounded or chamfered put together with glue pinned at joints complete all as specified and as directed.

Material and labour for cement concrete type C-1 (1:3:6) 20mm graded granite stone aggregate as in bed blocks for fixing hold fasts, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs (other than roof kerbs), water troughs and the like including weathering, slightly rounded or chamfered angles and throating, etc., complete all as specified and as directed.

Material and labour for MS work as in hold fast, Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required; hooks (stay), heavy, for large gates; hook and pintle hinges; large hasps and staples; chains; hand made sliding bolts; clamps; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 etc., complete all as specified and as directed.

Material and labour for preparing and treating ends of posts, back of chowkats with coal tar black paint, area tarred exc. 0.10 sqm but not exc. 0.50 sqm all as specified and as directed.

Material and labour for preparing and treating small articles such as hold fasts with coal tar black paint, area tarred not exc. 0.10 sqm all as specified or as directed.

Material and labour for Forming jambs, etc. to door/ window openings, including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work in Cement mortar 1:4, complete all as specified or as directed.

Supply and fix 35mm thick, 2nd class hard wood Plain framed factory made Panelled shutter (any number of panels), with panels of timber flat on both sides (feather edged) or of veneered particle board medium density, wood particle board with commercial face veneers complete all as specified and as directed.

Supply and fix 35mm thick, 2nd class hard wood factory made Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed.

Supply and fix 35mm thick, 2nd class hard wood, glazed and skeleton shutters (Partly Panelled and Partly Glazed), open rebated and prepared to receive glass, gauze etc,(without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc size of members of shutters as specified in SSR part I, section 8, clause 8.24(a) complete all as specified and as directed.

Taking down PVC chowkats or frames n.exc. 1.5 sqm each along with shutters (without taking off shutters from the frame)etc., complete all as directed.

Supply and fix solid PVC door frame of size 50mmx47mm made out of 5mm thick plain colour PVC sheet reinforced with 19mm MS square tube of 19 gauge mitre cut at two corners and joined by inserting two Nos of 150mm long brackets of 15mmx15mm MS square tube inside the 19mm MS square tube and suitably screwed complete all as specified and as directed.

Supply and Fix Factory Made Solid PVC Moulded Door Shutter (With Wood free EPS), 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & shown on drawing in SSR Pt II of 2010; etc., complete all as specified and as directed.

Material and labour for Preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer etc., complete all as specified and as directed.

Supply and Fix 300mm long mild steel ordinary rat tail rod pattern spring including roller and roller plate complete all as specified and as directed

Supply and fix 100mm size, butt hinge medium weight cold rolled mild steel & fixed complete all as specified and as directed.

Supply and fix in repairs 100 mm butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised & fixed, type B-21; complete all as specified and as directed.

Supply and fix 300 mm long Aluminium alloy anodised sliding door bolts with hasp and staple(bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium and fixed all as specified and as directed.

Supply and fix for 200mm length aluminum, anodised, barrel tower bolts of extruded section and fixed.

Supply and fix for 100mm length aluminum, anodised, barrel tower bolts of extruded section and fixed.

Supply and Fix 150mm long Extruded aluminium alloy handles, fabricated type, anodised; complete all as specified and as directed.

Supply and Fix 100mm long Extruded aluminium alloy handles, fabricated type, anodised; complete all as specified and as directed.

Supply and fix floor door stopper 150mm size of aluminium alloy body and tongue, anodised, with hard drawn steel spring fixed in floor all as specified and as directed.

Taking down steel/ wooden window/ ventilator chowkats or frames n.exc. 1.5 sqm each along with shutters (without taking off shutters from the frame)etc., complete all as directed.

Supply and fix anodised aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

Supply and fix anodised aluminium door shutters, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading, screws, etc. complete all as specified & directed.

Supply and Fix mild steel work as in window guard/ grill etc confirming to FE-290 grade E-165, complete all as specified and as directed.

Supply and Fix Stainless steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or Stainless steel wire staples; including taking down existing unserviceable GI wire cloth etc., complete all as specified and as directed.

Material and labour for sheet glass 4 mm thick ordinary quality and glazing with clips in squares n.exc 0.50 Sqm each etc., complete all as specified and as directed.

Material and labour for sheet glass 4 mm thick figured glass pinhead type and glazing with clips in squares n.exc 0.50 Sqm each etc., complete all as specified and as directed.

Supply and Fix in repairs, Stainless steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or Stainless steel wire staples; including taking down existing unserviceable GI wire cloth etc., complete all as specified and as directed.

Supply and fix in repairs, floor door stopper 150mm size of aluminium alloy body and tongue, anodised, with hard drawn steel spring fixed in floor all as specified and as directed.

Supply and fix in repairs, Aluminium anodised Tubular towel rail, 20mm dia, D type, 60cm long between flanges all as specified and as directed.

Material and labour for 18/19 mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work, including 6 mm thick teakwood lipping fixed with nails alround edges of particle board as in cup-board shutters; including takingdown the existing unserviceable shutter etc., complete all as specified and as directed.

Material and labour for 18/19 mm thick Particle board, medium density, flat pressed, single layer type or three layer type with BWR type adhesive, fixed with screws to timber frame work, including necessary teakwood lipping of 6 mm thick fixed with nails for edges of particle board as in shelves, drawers; including takingdown the existing unserviceable shelves, drawers etc., complete all as specified and as directed.

Supply and fix in repairs for Harrison Curtain rails, mild steel, chromium plated with fixing brackets, stops, rollers etc., complete all as specified and as directed.

Demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars etc., but excluding ashlar facings, complete all as directed.

Material and labour for Brickwork with fly ash bricks (old size), straight or curved on plan exc 6 m mean radius, built in CM 1:6 etc., complete all as specified and as directed.

Preparing old walls/ ceilings to receive plaster, etc., by taking down cement plaster of any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc., complete all as specified and as directed.

Material and labour for 10 mm thick Rendering on fair faces of brickwork in CM 1:6 to even and smooth without using extra cement all as specified and as directed.

Material and labour for 5 mm thick cement plaster in CM 1:4, mixed with WPC, over 10 mm thick plaster in CM 1:6; finished fair and even etc., complete all as specified and as directed. Note:- Integral waterproofing compound shall be measure and paid separately under appropriate item here-in-after.

Material and labour for 5 mm thick Rendering on fair faces of concrete in CM 1:3; finished fair and even complete all as specified and as directed.

Material and labour for preparing new plastered surface of wall and applying two coats of Oil bound Distemper over a coat of alkali resistant primer complete all as specified and as directed.

Material and labour for preparation new surfaces of wall and applying two coats of cement based paint over a coat of primer on external wall surfaces, complete all as specified and as directed.

Material and labour for preparing newly plastered surfaces of ceilings and applying three coats of white wash, complete all as specified and as directed.

Material and labour for Preparation of old plastered or unplastered surfaces of walls including brooming down, steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots, washing, rubbing down and stopping of distempered surfaces and applying one coat of oil bound distemper all as specified and as directed.

Material and labour for Preparation of old plastered or unplastered surfaces of walls including brooming down, steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots, washing, rubbing down and stopping of painted surfaces and applying one coat of cement base paint all as specified and as directed.

Material and labour for Preparation of old plastered or unplastered surfaces of ceilings including brooming down, steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots, washing, rubbing down and stopping of painted surfaces and applying one coat of cement base paint all as specified and as directed.

Material and labour for Preparation of old wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint etc., complete all as specified and as directed.

Material and labour for Writing letters or figures (Block, Roman, Italic or Indian) n. exc. 30 cm high with synthetic enamel paint of approved colour over plastered surfaces of wall etc., complete all as specified and as directed.

Supply and fix 15 mm bore Unplasticised PVC pipes of pressure rating 10 kgf/Sq.cm fixed complete to walls, ceilings or in floors etc., with all fittings such as bends, elbows, socket, reducer etc., complete all as specified and as directed.

Supply and fix 20 mm bore Unplasticised PVC pipes of pressure rating 10 kgf/Sq.cm fixed complete to walls, ceilings or in floors etc., with all fittings such as bends, elbows, socket, reducer etc., complete all as specified and as directed.

Supply and Fix in repairs, Vitreous china squatting pan of Orissa pattern of size 580 mm x 440mm white with integral foot rests (excluding flushing cistern and flushing pipe) and provision of lime concrete/ lean cement concrete bedding etc., complete all as specified and as directed.

Supply and Fix 110mm bore PVC (SWR) 'P' trap including jointing to waste pipe outlet with solvent cement etc., complete all as specified and as directed.

Supply and Fix 110mm bore PVC (SWR) WC connector with lip ring all as specified and as directed.

Supply and Fix in repairs, PVC (SWR) floor trap plain with grating including jointing to waste pipe 110 mm bore outlet with solvent cement etc., complete all as specified and as directed.

Supply and Fix Bib taps fancy type, cast copper alloy, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed for 15 mm bore dia iron pipe or for unions and fixed; complete all as specified and as directed.

Supply and fix 15 mm dia Pillar taps, cast copper alloy, chromium plated, fancy type, screwed down high pressure with or with out letters HOT or cold with long screwed shanks and fly-nuts, screwed for iron pipe/ PVC connection and fixed; complete all as specified and as directed.

Supply and Fix angle stop valves, cast copper alloy, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for 15 mm bore dia iron pipe or for unions/ PVC connection and fixed; complete all as specified and as directed.

Supply and fix in repairs, PVC valveless syphonic action type, flushing cistern 10 litres capacity low level, white, with inlet, ball valve, float and handle including brackets, flush pipe and all accessories etc., complete all as specified and as directed.

Supply and Fix angle stop valves fancy type, cast copper alloy, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for 15 mm bore dia iron pipe or for unions/ PVC connection and fixed; complete all as specified and as directed.

Supply and Fix in repairs, vitreous china wash basin white flat back size 550 x 400 mm including CI brackets for erecting, porcelain stopper, cutting for and pinning ends of brackets including waste fittings of brass chromium plated 32 mm, including fixing of waste pipe, 300mm long PVC connection with PTMT nuts (excluding taps chain and plug) etc., complete all as specified and as directed. Note:- The quoted rate shall deemed to be inclusive of cost of Waste pipe and PVC connection.

Supply and Fix brass chromium plated shower rose 125mm size, with swivel joint, fixed to steel pipe or unions; complete all as specified and as directed.

Supply and fix in repairs, Stainless steel plate rack of size 750X600X250mm with screws and necessary fittings including necessary cutting/ drilling holes in wall, plugs, screws for fixing etc., complete all as specified and directed.

Supply and fix in repairs, rotational moulded polyethylene water storage tanks 500 Ltr capacity, three layered (cylinderical vertical with closed top) hoisted and fixed in position all as specified in SSR Part 1 and as directed.

Supply and Fix ball brass valves, 20 mm bore dia high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferule and fixed; complete all as specified and as directed.

Supply and fix in repair, sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm all as directed.

Supply and Fix PVC connection 15 mm size consisting of PTMT nuts, at both ends suitable for bore of pipe 15 mm, length 450 mm; complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises etc., complete all as directed.

Material and labour for Non - skid Ceramic Coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement (i.e., white cement mixed with pigment) to match with tile colour over Screed bed or bedding layer of cement mortar 20 mm thick in CM 1:4 etc., complete all as specified and as directed.

Material and labour for Non - skid Ceramic Coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, as in skirtings (by cutting the tiles to required size and of colour/ pattern as that of flooring to match with) etc., set and jointed in neat cement slurry and pointed in white or coloured cement (i.e., white cement mixed with pigment) to match with tile colour over rendering or backing coat of cement mortar 10 mm thick in CM 1:3 etc., complete all as specified and as directed.

Material and labour for Non - skid Ceramic Coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement (i.e., white cement mixed with pigment) to match with tile colour over Screed bed or bedding layer of cement mortar 20 mm thick in CM 1:4 etc., complete all as specified and as directed.

Material and labour for Glazed Ceramic Coloured tiles 300mm x 200mm x 7 mm thick, as in dados etc., set and jointed in neat cement slurry and pointed in white or coloured cement (i.e., white cement mixed with pigment) to match with tile colour over rendering or backing coat of cement mortar 10 mm thick in CM 1:3 etc., complete all as specified and as directed.

Dismantling Stone slabs and tiles of any description or thickness Laid, bedded and pointed in any mortar as in floors, aprons etc., complete all as directed.

Material and labour for Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete, over Screed bed or bedding layer of cement mortar 20 mm thick in CM 1:4 etc., complete all as specified and as directed.

Demolition of Cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) all as specified and as directed.

Material and labour for 75mm thick Plain Cement Concrete (1:3:6) type C-1 (using 20mm graded granite stone aggregate) as in plinth protection and paving, surface finished even & smooth without using extra cement etc., complete all as specified and as directed.

Complete Removal of existing water proofing treatment over roof including PCC of any thickness description in any position including cleaning wire brushing, watering remove of debris up to 1500 mtr distance etc., complete all as specified and as directed.

Material and labour for Providing, cement concrete, 1:2:4, type B-0 (using 12.50mm graded granite stone aggregate) cast-in-situ as in levelling course over roof/ terrace and the like including weathering, slightly rounded or chamfered angles and throating where required, all as specified and as directed.

Material and labour for screed bedding 10mm thick in CM 1:4 on fair faces of brick work or concrete surfaces finished fair and even, duly mixed with water proofing compound etc., complete all as specified and as directed. Note:- Integral waterproofing compound shall be measure and paid separately under appropriate item here-in-after.

Supply only Integral waterproofing compound.

Material and labour for water proofing treatment to existing roof slab using APP membrane as under:- (a) Prepare roof slab top surface, remove all loose materials (a) Apply a uniform coat of blown bitumen grade VG- 30 at 1.20 Kg/ Sqm confirming to IS 702. (b) APP modified pre fabricated membrane mineral finish, 3 mm thick and weighing not less than 3.8 Kg/ Sqm reinforced with non woven polyester matt black finished torch applications for membrane with 100 mm overlap after necessary preparation of surface complete as per manufacturers instructions. (c) Apply a uniform coat of bitumen primer at 0.70 kg/ Sqm (e) Apply aluminium paint on top at 0.1 Kg/ Sqm all as specified and as directed. All the angles, abutments and the drainage outlets shall be sealed with extra care to ensure full bondage, Manufacturers: STP/ SAPL (ARGO-P/ Hydro tech Limited (Hydroflame) or of equivalent (approved) makes as listed hereinafter in tender documents. Note:- The work shall be executed through manufacturer's applicator as approved by GE.

Material and labour for Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling, rodding and plugging holes etc., complete as in apron; all as specified and as directed.

Material and labour for Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment of voids in masonry using chemical emulsion one litre per hole, at 300mm intervals including drilling holes at 45 degree and replugging them with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floors etc., complete all as specified and as directed.

Material and labour for Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same etc., complete all as specified and as directed.

Taking down PVC pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories); complete all as directed.

Supply and Fix 75 mm bore PVC (SWR) pipes single socketed in any length, laid in trenches or in floors and jointing with solvent cement etc., complete all as specified and as directed.

Supply and Fix 110 mm bore PVC (SWR) pipes single socketed in any length, laid in trenches or in floors and jointing with solvent cement etc., complete all as specified and as directed.

Supply and Fix 75 mm bore PVC (SWR) pipes single socketed in any length and jointing with solvent cement, fixed to walls by suitable size of GI clamps, etc., complete all as specified and as directed.

Supply and Fix 110 mm bore PVC (SWR) pipes single socketed in any length and jointing with solvent cement, fixed to walls by suitable size of GI clamps, etc., complete all as specified and as directed.

Supply and Fix 75mm bore PVC (SWR) bend any radius etc., complete all as specified and as directed.

Supply and Fix 110 mm bore PVC (SWR) bend any radius etc., complete all as specified and as directed.

Supply and Fix 75 mm bore PVC (SWR) branch pieces single (Single Y) equal or un-equal etc., complete all as specified and as directed.

Supply and Fix 110 mm bore PVC (SWR) branch pieces single (Single Y) equal or un-equal etc., complete all as specified and as directed.

Supply and Fix 75mm bore PVC (SWR) vent cowl all as specified and as directed.

Supply and Fix 110mm bore PVC (SWR) vent cowl all as specified and as directed.

Material and labour for 10 mm thick Rendering on fair faces of brickwork/ concrete in CM 1:3 to even and smooth without using extra cement as in sunken floors; complete all as specified and as directed.

Material and labour for Priming surfaces and applying normal treatment (for moderate conditions) using glass fibre base bitumen felt, grade 2 as in waterproofing treatment for sunken floors; complete all as specified and as directed.

Supply and fix 20 mm dia galvanized iron tube medium grade as in spout pipe for sunken floors including taking down the existing unserviceable GI spout pipe by necessary cutting and making good with CM 1:3 etc., complete all as specified and as directed.

Excavation in trenches not exc 1.5m wide and not exc 1.5m depth, for foundation, etc. or for shafts, wells, cesspits, manholes, etc. not exc 10 Sqm on plan and not exc 1.5 m in depth and getting out in hard/ dense soil etc., complete all as specified and as directed.

Material and labour for Reinforced concrete pipes, 150mm dia class NP2, laid and jointed complete with collars laid in trenches and set and jointed in CM 1:1 etc., complete all as specified and as directed.

Material and labour for concrete bed to SWG/ Reinforced concrete pipe line of 150mm bore with PCC (1:3:6), type C2 (using 40mm graded granite stone aggregate), including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and as directed.

Returning filling in including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick using soil obtained from excavation all as directed.

Removing excaviated material to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point all as directed.

Material and labour for Cutting into for making alterations, additions, etc. to existing manholes/ drainage for connecting new drains/ pipe of internal dia 150mm, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/ 2 round or 3/ 4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required etc., complete all as specified and as directed.

M&L for precast reniforced Cement concrete 1:2:4, type B1 (20 mm graded granite stone aggregate) set in CM 1:4 as in Cover slabs for drains, manholes etc and similar articles with plain faces etc., including necessary forms and moulds complete all as specified and as directed. Note: Reinforcement shall be measured and paid separately.

Supply and fix of mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia etc., complete all as specified and as directed.

Material and labour for Brickwork with fly ash bricks (old size), straight or curved on plan exc 6 m mean radius, built in CM 1:4 etc., complete all as specified and as directed.

Material and labour for Providing, cement concrete, 1:2:4, type B-1 (using 20mm graded granite stone aggregate) cast-in-situ as in surface channels the like including weathering, slightly rounded or chamfered angles and throating where required, all as specified and as directed.

Material and labour for 10 mm thick cement plaster in CM 1:4 on fair faces of brickwork, cement mortar mixed with WPC; finished even and smooth without using extra cement etc., complete all as specified and as directed. Note:- Integral waterproofing compound shall be measure and paid separately under appropriate item here-in-before.

Demolition of Cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for; complete all as specified and as directed.

Material and labour for Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface; complete all as specified and as directed.

Material and labour for 100 mm thick Plain cement concrete type D-2, 1:4:8 (40mm graded granite stone aggregate) in sub-floors, sub-bases, floors and pavings, etc., complete all as specified and as directed.

Material and labour chequerred tiles 30cm x30cm x25mm thick set and jointed and pointed in neat cement slurry as in floors over and including 20mm thick screed bed in CM 1:4 bedded and jointed in gray cement slurry with pigment all as specified and as directed

Taking down carefully point wiring with PVC aluminium conductors cables in PVC / STEEL conduits/TW Batten complete (for light, fan, sockets or power) removing materials from site, taken as credit, and making good the disturbed surfaces, all as specified and as directed.

Material and labour for point wiring with three runs of single core 1.50 Sq.mm size multistranded copper conductor insulated cables and out of three runs one single core 1.50 Sq.mm size green colour PVC insulated, multistranded copper conductor cable as earth continuity conductor, 1100 volts grade, complete drawn through and including 20mm rigid PVC conduit and conduit accessories, confirming to IS specifications, Concealed in walls, fixing on ceiling/trusses with suitable clamps , screws etc., including provision of 1.22 mm thick MS terminal boxes with provision of 3 mm thick plastic laminated sheet top cover fixed with cadmium plated iron screws for mounting switches, sockets, fan regulators etc., including connecting up and testing , complete all as specified and as directed for the follwing:-

(a) One light point controlled by one switch.

(b) One ceiling fan point controlled by one switch and a regulator.

(c) One exhaust fan point controlled by one switch and a regulator.

(d) One switch socket outlet 3 pin 5 Amps on same board along with other switches.

(e) One switch socket outlet 3 pin 5 Amps on independent board.

(f) One bell/ buzzer point controlled by one bell push.

All as per item No. 118.00 here-in-before but with two single core 4 Sq.mm size cables and one 4 sq.mm green colour cable as earth continuity conductor for one switch socket out let 3 pin 15 Amps on independent board.

Taking down carefully Power/ Sub main wirings with PVC aluminum conductor cables in PVC/ STEEL conduits/ TW battens up to 2 runs of 6 Sq.mm removing materials from site, taken as credit, making good the disturbed surfaces all as specified and as directed.

Material and labour for wiring for circuit / power / sub main with two runs of single core 6 Sqmm size and one run of single core 6.0 Sqmm (green colour as earth continuity conductor) PVC insulated, unsheathed, muilti stranded copper conductor cable drawn through and including 32 mm dia rigid PVC conduit and conduit accessories Note for item No. 118.00 to 119.00 & 121.00:- The portion of the wirings on walls shall be concealed in wall, as directed, by cutting chasis and making good the disturded surfaces with cement plastring to match with the adjucent surface and cost for this is deemed to be inclusive in the rates quoted.

Supply and fix Switch piano flush type, single pole, 5 Amps, 240 volts, on the phenolic laminated sheet as required.

Supply and fix Bell push, flush type, single pole, 5 Amps, 240 volts, on the phenolic laminated sheet as required.

Supply and fix Switch socket 3 pin 5 amps, multi pin, flush type, on the phenolic laminated sheet as required.

Supply and fix Switch socket 3 pin 15 Amps, multipurpose, flush type, on the phenolic laminated sheet as required.

Supply and fix ceiling rose 65 X 50 mm, three terminals, bakelite, surface type.

Supply and fix electronic dimmers, 450W, 250V flush type on the phenolic laminated sheet as required. Note:- Cost of Phenolic laminated sheet shall deemed to be inclusive in point wiring items here-in-before.

Supply and fix MCB single pole 5-30 Amps, 230V, 'C' curve.

Supply and fix MCB single pole nuetral 40 Amps, 230V, 'C' curve.

Material and labour for readily Taken down unserviceable ceiling fan of 1200mm sweep from site, dismantling and opening up to remove burnt-out unserviceable copper winding wire and insulating materials including cleaning and rewinding both rotar & stater with same type of insulation and gauge of super enamelled copper conductor winding wires including necessary insulating materials, sleevs etc., and replacing of ball bearings, bushes and same type of condensers, oiling/ greasing etc. and re-assembling and duly rectifying other minor defects to make the fan serviceable in all respects including painting a coat of synthetic enamel paint (colour as directed ) with spraying machine and writing MES No with synthetic enamel paint (black colour) and testing for proper function etc., complete all as specified and as directed.

Material and labour for HANGING ONLY repaired CEILING FANS, of 1200/1400mm sweep any type / model / make complete with all accessories including provision of 1.5 Sq.mm flexible copper conductor 3 core PVC cable not more than 1.5 mtr long and connecting up ceiling rose / connector to fan and testing for proper function and safety etc., complete all as specified and as directed.

Supply and fix Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings etc., complete all as specified and as directed.

Supply and fix Surface and wall mounted LED tube light fitting batten type, extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser & integrated electronic driver complete with all accessories, suitable for operation on AC, single phase 220/ 230 Volts, 50 Hz supply including taking down old fittings. Model:- ENDURA LINEAR NEO, Make Havells, cat part no- ENDURALINEARNEOBS20WLED865SPCWH or equivalent model of other manufacturers as listed here-in-after in the tender documents.

Supply and fix in repairs, LED bldg security light fitting 30W made up of pressure die cast housing with toughed glass and individual high power LEDs with secondary optics, IP65 protection and impact resistance of IK07, complete pre wired and connecting up with suitable twin core flexible copper wire; including fixing to existing 40mm bore light grade GI pipe bolts/ screws and nuts etc., complete all as specified and as directed. Make: Havells, Model: Endura citylite Platinum, Cat. No: ENDURACITYLITEPLAT PLUSSL30WLED757SASYBOPC, or equivalent model of other manufacturers as listed here-in-after in the tender documents.

Supply & Fix in repairs, LED Mirror light fitting 1x10w, wall mounted extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser & integrated electronic driver complete with all accessories, suitable for operation on AC, single phase 220/ 230 Volts , 50 Hz supply etc., complete all as specified and as directed. Make:-Havells Model ENDURALINEARNEOBS10WLED865SPCWH

Supply & Fix in repairs, Load line vertical distribution Board, TPN 4 way double door, fixed on wall semi flush, loadline DB are fitted with Bus bars, neutral links, blanking plates, including provision of one incommer MCCB 160 Amps and 12 Nos of SP MCBs(40Amps) with all accessories suitable for DB etc., complete all as specified and as directed. Make Legrand Cat no. DHDLVDRWGOFO04 or equivalent model of other manufacturers as listed here-in-after in the tender documents.

Supply and fix in repairs, Distribution boards, sheet metal enclosure with hinged type single door, for housing isolators/ MCB's, fixed on wall semi flush Single Pole and Neutral 8 ways, 240 volts, with 200 Amps rated bus bar complete with all accessories etc., complete all as specified and as directed. Make Legrand Cat no. DHDPSHODRW04 or equivalent model of other manufacturers as listed here-in-after in the tender documents.

Material and labour for Electrical Earthing complete with GI plate Electrode of size 60 Cm X 60 Cm X 6.3 mm thick burried directly in ground vertically at a depth not less than 2.25 mtr. below normal ground level, with top edge of earth plate at a depth not less than 1.50 mtr. below normal ground level, connected to galvanised iron earth lead wire 4 mm dia by means of bolts, nuts and washers of galvanised iron, earth lead wire protected by means of 15 mm bore dia light grade GI pipe up to switch board/ panel board, all as specified and shown in MES schedule Electrical Plate No.3 of SSR Part I 2009, including excavation and earth work in any type of soil (including disposal of surplus soil to a distance 50m as directed), PCC 1:2:4 type B1 in chamber, RCC 1:2:4 type B1 40 mm thick cover slab with 8 mm dia TMT bars at 140 mm centre to centre both ways, with 6 mm dia MS hook, Charcoal dust, salt, 25 mm dia GI pipe medium grade for watering with funnel and GI wire mesh; including taking down old unserviceable exisiting earthing etc., complete all as specified and as directed. Note : - The unit rate quoted shall deemed to have included for GI protection pipe, GI earth wire up to 7.5 mtr, GI water pipe, wire mesh, funnel, excavation, RCC pit cover.

S&F Exhaust fan size 225 sweep (mm) metal body suitable with louver shutter for operating in 230V, 50HZ supply inculding necessary cutting of holes at wall to shape as size of exhust fan and making good all surface of wall to existing matching and colour as dirtected. Make: Crompton greaves, Model: Flux Air 9'' or equivalent in Havells, Bajaj Note: Rate quoted deemed to be inclusive of Cutting of holes at/ PCC hole.

Supply and lay LT UG cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with multistranded aluminium conductor of size 35 sq mm 3.5 core, in trenches/ floors or fixed on walls, including fixing materials like lugs,cable glands etc., complete all as specified and as directed.

Excavation in trenches not exc 1.5m wide and not exc 1.5m depth, not exc 10 Sqm on plan and not exc 1.5 m in depth and getting out in soft/loose soil for laying cable, GI pipe,etc., complete all as specified and as directed.

Supply lay/spread in trenches, river sand, clean, including spreading, levelling, punning as in cushioning of cables complete all as specified in clause 19.75 of SSR Part I and as directed. Note : Punned thickness will be measured and paid.

Supply, lay in trenches fly ash bricks, old size, laid flat and dry, adjacent to each other as cable protection; complete all as specified and as directed. Note:- Bricks shall be laid in such a way that its length is perpendicular to the length of cable.

M/s Omm Muruga Enterprises

bhakthavatsalam builders

RAVI ENTERPRISE