Ward No. 44, Mohalla Murli Nagar (Suhag Nagar) Construction of a CC road and drain from the boundary of Sindoor Factory to Diwan Singh house.

Earth work in cutting or in embankment in ordinary soil, excavation to be in the form of regular pits not exceeding 1/2 M (20") depth & earth work in embankment to be in 20 cm layers including ramming & dressing the surface to required levels & solpes & also including 1.50 M (5ft) lift & 30 M (100ft) lead all complete i/c cartage upto 8km. SI No. 231(a)+253

Construction of granular sub-base by providing well graded material, spreading in uniform layers with Mortar grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per technical specification clause-401

Providing & Laying Cement Concrete 1:6:12 in cement C-sand and 40mm stone ballast including supply of material and labour etc. SI No.273

M 150 Class B W in 1:4 cement, coarse sand mortar in foundation and up to plinth in drain. SI No 6.1.1

CEMENT CONCRETE PAVEMENT(C.C ROAD) construction of un-reinforced plain cement concrete pavement thickness as per design, over a prepared sub base with 43 grade cement or any other type as per clause 1501.2.2 M 30 (grade) coarse and fine aggregates conforming to IS 383 maximun size of coarse aggregate not exceeding 25mm mixed in a concrete mixer of not less then 0.2 cum capacity and appropriate weight batcher using approved mix design, laid in approved fixed side fromwork (steel channel laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, admixtures as approved curing concrete slabs for 14 days, curing compound (where specified) and water finishing to lines and grade as per drawing and Technical Specification Clause 1501 (approved Quarri grit) (S.I. No.23 New Item)

Plaster 12mm thick in 1:4 in cement coarse sand mortar including supply of material labour etc S.I.No. 13.4.1

Providing and laying cement concrete in 1:2:4 in cement coarse sand and 20mm stone grit including all as per S.I. No 4.1.3

Supply & Fixing a Road Sign Board or inauguration stone including Writing, Painting & Cartage etc.