REPAIR MAINTENANCE TO JOINERY, INTERNAL AND EXTERNAL WALL, CEILING PLASTER, INTERNAL WATER SUPPLY PLUMBING WORK, SOIL WASTE, VENT PIPES, AREA DRAINAGE, ETC. AND CONNECTED ITEMS OF NSBI CHANAKYA BAGH INCLUDING NAVY CHILDREN SCHOOL AT CHANAKYA BAGH

Amount

S&F in repairs 150mm long aluminium anodised, barrel tower bolts of extruded section and fixed, complete all as specified and directed.

S&F in repairs 300mm long aluminium alloy anodised sliding door bolt with hasp & stapple (bolt type) and fixed clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast- aluminium alloy and fixed complete all as specified and directed.

S&F in repairs, 100mm long butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 complete all as specified and directed.

S&F in repairs, 75mm long butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed type C-21 complete all as specified and directed.

S&F in repairs, continuous piano hinges, mild steel, bright finish or electro galvanised 30mm width of flaps (when open) complete all as specified and directed.

S&F in repairs, 150mm size extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S&F in repairs, 100mm size extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S&F in repairs, aluminium mortice lock vertical type 100 mm size, 4 levers complete all as specified and directed.

S&F in repairs, mild steel mortice lock vertical type 65 mm size, 2 levers complete all as specified and directed.

S&F in repairs, brass polished 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished complete all as specified and directed.

S&F in repairs, 75 mm hasp & staple, safety type, aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.

S&F in repairs, stainless steel chromium plated, tubular curtain rod 25mm dia complete all as specified and directed

S&F in repairs, brass chromium plated tubular towel rail, 20 mm dia, D type, 60 cm long between flanges fixed with brass screws complete all as specified and directed.

S&F in repairs, Stainless steel end bracket with Doom brackets for curtain rod 25 mm dia fixed complete all as specified and directed

S&F in repairs, brass chromium plated towel ring 200mm dia complete all as specified and directed.

S&F in repairs, 140 mm long cover plate door stopper aluminum alloy body and tongue, anodized, with hard drawn steel spring, complete all as specified and directed.

S&F in repairs, ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed complete all as specified and directed.

S&F in repairs, aluminium (extruded section) body door closer hydraulically regulated, designation No 3, universal type, suitable for door shutters 851 mm to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed.

S&F in repairs, galvanised steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 0.91 mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.

M&L for running welding in repairs exc 2.5 cm length but n.exc 5 cm (thickness of metal to be welded exc 6 mm but not exc 9mm) complete all as specified and directed.

S&F in repairs, 18/19 mm thick celluca board fixed in cupboard, drawer, shelf or partition fixed with screws to timber frame work or wall complete all as specified and directed.

S&F in repairs, 2mm thick fibre sheet glass, ordinary quality and glazing with oil putty, in squares not exc 0.5 sqm in each pane complete all as specified and directed.

S&F in repairs, 4.8mm thick sheet glass, ordinary quality and glazing with oil putty, in squares exc 0.5 sqm in each pane complete all as specified and directed.

S&F in repairs, 1000 to 1400 mm long and 20 mm wide door seal incl 10 mm wide cotton complete all as specified and directed .

S&F in repairs, looking mirror with plastic moulded frame of size 630 X 450mm, 3mm thickness complete all as specified and directed

S&F in repairs, elegant PVC mirror cabinet with towel rails of size 475mm X 500mm X 150mm complete all as specified and directed .

Repairing, Easing & adjusting of aluminium door including replacement of small article like rubber gaskets, aluminium beadings, screws, etc complete all as specified and directed .

S&F in repairs, small fittings galvanised iron medium grade such as socket, dead plug, elbow, nipple, Tee, union, tank nipple, extension nipple etc for 15 mm bore pipe (ISI marked) complete all as specified and directed.

S&F in repairs, small fittings galvanised iron medium grade such as socket, dead plug, elbow, nipple, Tee, union, tank nipple, extension nipple etc for 20 mm bore pipe (ISI marked) complete all as specified and directed.

S&F in repairs, small fittings galvanised iron medium grade such as socket, dead plug, elbow, nipple, Tee, union, tank nipple etc for 25 mm bore pipe (ISI marked) complete all as specified and directed.

S&F in repairs, 15mm bore brass head, phase, spindle etc of any size for bib cock/pillar cock/ stop cock/WHB or Wall mixture etc any type complete all as specified and directed.

S&F in repairs, 15 mm bore chromium plated fancy type angle valve with elegant knob screwed down high pressure screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F in repairs, 15 mm bore chromium plated fancy type two way angle valve with elegant knob screwed down high pressure screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F in repairs, 15 mm bore chromium plated fancy type long body bib taps with elegant knob screwed down high pressure complete all as specified and directed.

S&F in repairs, 15 mm bore chromium plated fancy type two way bib taps with elegant knob screwed down high pressure complete all as specified and directed.

Taking up or down steel tubing 15 mm bore and connections, including cleaning for refixing or removal to store complete all as specified and directed.

Taking up or down steel tubing 20 mm bore and connections, including cleaning for refixing or removal to store complete all as specified and directed.

Taking up or down steel tubing 25 mm bore and connections, including cleaning for refixing or removal to store complete all as specified and directed.

S&F 15mm bore of medium grade galvanised steel water tubing, with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S&F 20mm bore of medium grade galvanised steel water tubing, with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S&F 25mm bore of medium grade galvanised steel water tubing, with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

Disconnecting existing tanks of capacity not exc 500 litres, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position (Note :- Cleaning, repairing, etc. shall be measured and paid separately) complete all as specified and directed

Disconnecting existing tanks of capacity exc 500 & not exc 1000 litres, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position (Note :- Cleaning repairing,, etc. shall be measured and paid separately) complete all as specified and directed

Dismantling exc 250 and not exc 500 ltrs capacity water tanks and removing to store complete all as specified and directed

Dismantling exc 500 and not exc 1000 ltrs capacity water tanks and removing to store complete all as specified and directed

Cleaning and removing all scales and dirt etc from tanks and from mouths of circulating pipes etc for 500 Ltrs capacity of tanks complete all as specified and directed.

Cleaning and removing all scales and dirt etc from tanks and from mouths of circulating pipes etc for 1000 Ltrs capacity of tanks complete all as specified and directed.

S&F 500 litres capacity Rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) triple layer (ISI marked) hoisted and fixed in position complete all as specified and directed.

S&F 1000 litres capacity Rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) triple layer (ISI marked) hoisted and fixed in position complete all as specified and directed.

S&F in repairs, PVC tank covers suitable for 500 litres to 1000 litres capacity tanks complete all as specified and directed

S&F in repairs, 15 mm bore chromium plated fancy type pillar tap for WHBs with capstan heads, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F in repairs, 15mm bore swan neck mixture type pillar tap, cast copper alloy with capstan head, chromium plated, fancy type, screwed down, high pressure, for hot and cold water complete all as specified and directed.

S&F in repairs, 15mm bore Gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe or union and fixed complete all as specified and directed

S&F in repairs, 20mm bore Gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe or union and fixed complete all as specified and directed

S&F in repairs, 25mm bore Gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe or union and fixed complete all as specified and directed

S&F in repairs, 32mm bore waste fittings, brass, chromium plated for glazed ware sinks, basins, etc with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed.

S&F in repairs, 40mm bore waste fittings, brass, chromium plated for glazed ware sinks, basins, etc with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed.

S&F in repairs, 32 mm bore PVC waste pipe for WHB/urinals 1000mm long with union etc complete all as specified and directed.

S&F in repairs, 15mm bore Bib tap standard of PTMT (Minimum weight 90 gms) any colour high pressure screwed for iron pipe and fixed complete all as specified and directed.

S&F in repairs, ball valve 15mm, high pressure, of PTMT with epoxy coated aluminium rod & high density plastic ball complete all as specified and directed. (Minimum weight 15mm-142gms)

S&F in repairs, ball valve 20mm high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball complete all as specified and directed. (Minimum weight 20 mm - 210 gms)

S&F in repairs, ball valve 25mm high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball complete all as specified and directed. (Minimum weight 25mm-455gms)

S&F in repairs, glass corner shelf fixed with and including chromium plated brass screws and wooden/plastic cleats complete all as specified and directed.

S&F in repairs, PVC connection 15mm dia and 450 mm long with 2 Nos PTMT nuts with washers complete all as specified and directed.

S&F in repairs, PVC connection 15mm dia and 600 mm long with 2 Nos PTMT nuts with washers complete all as specified and directed.

S&F in repairs, CI bracket for WHB or kitchen Sink etc complete all as specified and directed.

S&F in repairs, 125 mm dia CP grating complete all as specified and directed.

S&F in repairs, stack clamps for 100mm bore pipe made out of 50mm x 5mm flat iron and 16mm dia round stays, including bolts and nuts and securing ends of stays to walls or roof complete all as specified and directed.

S&F in repairs, 75mm dia PVC (SWR) pipes, with all fittings like bend and joint, etc single socketed, in any length, with rubber ring joints, fixed to walls complete all as specified and directed.

S&F in repairs, 110mm dia PVC (SWR) pipes, with all fittings like bent and joints etc single socketed, in any length, with rubber rings joints, fixed to walls complete all as specified and directed.

S&F in repairs, stainless steel sink, 1.00mm thick for kitchen or laboratory, with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, over all size 495mm x 420mm with bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F in repairs, stainless steel sink with draining board, made out of 1.00mm thick sheet for kitchen or laboratory, with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, over all size 915mm x 460mm with bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F in repairs, vitreous china wash down water closet pan (pedestal pattern) white including connection to drain (or outgoing pipe) and to flush pipe, antisyphonage pipe etc complete all as specified and directed.

S&F in repairs, vitreous china water closet squatting pan 'Orissa' pattern size 580 X 440 mm white integral foot rests including provision of cement concrete bedding, connection to flush pipe and making good the disturbed portion of floor to match with the existing surface complete all as directed.

S&F in repairs, Cascade type european water closet, coloured, floor mounted, with seat cover, seat cover hanging devices complete all as specified and directed.

S&F in repair vitreous china ware urinal half stall type white/coloured connection to inlet and outgoing pipe (waste coupling) complete fixed to walls with steel screws and PVC rawl plug and making good the surface by white cement to match the wall shade complete all as specified and directed.

S&F in repairs, brass chromium plated spreader suitable for urinal complete all as specified and directed.

S&F in repairs, 10 Ltrs capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed.

S&F in repairs, 125mm size brass chromium plated shower roses with or without swivel joints, including fixing to steel pipe or unions complete all as specified and directed.

S&F in repairs, flush pipe of polyethylene of low or high density or PVC 32mm dia, for low level flushing cistern complete all as specified and directed.

S&F in repairs, handle for PVC low level flushing complete all as specified and directed .

S&F in repairs, ball valve for PVC low level flushing cistern complete all as specified and directed

S&F in repairs, syphon kit complete for PVC low level flushing cistern complete all as specified and directed.

S&F in repairs, syphon kit complete for cascade type WC any type complete all as specified and directed.

S&F in repairs, plastic water closet seat cover white/coloured closed pattern with flat bottom and cover and mild steel chromium plated hinging device complete all as specified and directed.

S&F in repairs, wash hand basin vitreous china white, (flat back or angle back type) of size 550X400 mm including cutting for and pinning in ends of brackets or erecting stand complete all as directed.

S&F in repairs, Sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed .

S&F in repairs, 15 mm bore chromium plated health faucet brass of first quality with flexible tube of size 1.0 mtr long and wall hooks, complete all as specified and directed.

S&F in repairs, brass chromium plated toilet paper holder with CP brass screws, complete all as specified and directed.

S&F in repairs, brass chromium plated soap dish with CP brass screws complete all as specified and directed.

Easing and adjusting of wooden door/windows/cupboard shutters of any number of panels for easy closing/opening, tightening of hinges or changing the position of hinges, adjustment of tower bolts, sliding bolts complete as in petty repair work complete all as directed.

Repairing of water supply items/ fittings fixtures like leaking of biptap, stop cock, shower rose, gate valve, GI tubing, cistern, syphon, bottle trap, PVC connection, inlet/outlet of water tanks etc including provision for small articles like washers, threads, white lead and clamps etc for day to day maintenance / complaints complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick ( square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15 mm thick screed in Cement mortar 1:6 as in floor complete all as specified and directed.

M&L for glazed ceramic coloured tiles in vertical surface 350 x 250 x 7 mm or 450 x 350 x 7 mm thick over and including 10 mm thick rendering 1:4 CM set and jointed in neat cement slurry and pointed in white or colour cement to match coloured tiles complete all as specified and directed.

Demolition of brickwork built in Cement mortar or cement lime mortar incl all quoins, arches , pillar etc complete all as specified and directed.

M&L for Brick work with sub-class `B' bricks, straight or curved on plan exceeding 6 m mean radius built in cement mortar 1:6 complete all as specified and directed.

Taking down cement plaster on brick wall surfaces including racking out joints, hacking for key, scrubbing down with water etc and removing the rubbish out of Mod Land complete all as specified and directed.

M&L for 10mm thick rendering on ceiling surfaces in Cement mortar 1:3 finished even and smooth without using extra cement complete all as specified and directed.

M&L for three coats of white wash on newly plastered surfaces of ceiling including preparation complete all as specified and directed.

M&L 15mm thick rendering on fair or other than fair faces of brickwork or concrete surfaces in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of new or untreated plastered wall surfaces and applying two coats of oil bound distemper over 1.5mm thick wall care putty over a coat of alkali resistant primer complete all as specified and directed.

M&L 15mm thick rendering on fair or other than fair faces of brickwork or concrete surfaces in cement mortar1:4 with water proofing compound @ 200 ml per bag of cement, finished even and smooth without using extra cement complete all as specified and directed. Note : WPC shall be measured and paid separately.

Supply only water proofing compound liquid @ 200 ml per bag of cement complete all as specified and directed.

M&L for preparation of new plastered wall surfaces and applying 1.5 mm thick wall putty as per manufacturer's instructions, surfaces to be finished even and smooth over a coat of alkali resistant primer and applying two coats of exterior emulsion first quality of approved colour complete all as specified and directed.

M&L for complete removal of existing surface and applying 1.5 mm thick wall putty as per manufacturer's instructions, surfaces to be finished even and smooth over a coat of alkali resistant primer and two coats of exterior emulsion first quality of approved colour including preparation complete all as specified and directed.

Demolition of cement concrete unreinforced in any description and in any position not otherwise provided for complete all as specified and directed.

M&L for providing cement concrete type B-0 1:2:4 (using 12.5 mm graded stone aggregate) as in roof kerbs or mud stops rounded or chamfered on edges complete all as specified and directed.

Demolition of RCC manhole/Drain cover slabs and similar suspended work incl (reinforcement cut as required to facilitate demolition) complete all as specified and directed.

M&L for precast reinforced cement concrete type B-1 (1:2:4) (using 20 mm graded granite stone aggregate) for Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M&L for Mild steel TMT bars 10mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete all as specified and directed.

Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar complete all as specified and directed.

M&L for 20mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like including pointing with admixture of pigment to match with shade of granite, complete all as specified and directed.

M&L for rounding the edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed.

Taking down chowkhats or frame with shutters (without taking off shutters from frames) exc 1.5 Sqm but not exc 4.00 sqm each & removing form site incl making good disturbed portion complete all as specified and directed.

Taking down chowkhats or frame with shutters (without taking off shutters from frames) not exc 1.5 Sqm each & removing form site incl making good disturbed portion complete all as specified and directed.

S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed.

S&F Powder coated aluminium door shutters, aluinium section weighing 0.55 Kg/m including necessary jointing cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, snap beading screws etc complete all as specified and directed.

S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) window and ventilator shutters, side hung type without sash bars, aluminium sections weighing not less than 0.55kg/m including necessary joining cleats, glazing clips, rubber packing, powder coated aluminium snap beading, screws, powder coated aluminium fittings such as peg stays 150mm long - 01 Nos, hinges type B-21 100mm long - 02 Nos, suitable handle - 01 Nos etc in each shutter complete all as specified and directed.

Supply and fix 5.0mm thick heat absorbing glass any size complete all as specified and directed.

S&F stainless steel wire cloth, 0.54mm nominal dia of wire and 0.95mm average width of aperture and fixed with tinned tacks or galvanised wire staple etc complete all as specified and as directed.

S&F Powder coated aluminium ornamental grill 10 mm dia, 75 X 95 mm aperture fixed in powder coated aluminium snap beading complete all as specified and directed.

Demolition/Dismantling of Mud in roofs/Drain/vegetation/PCC layer in any thickness removed out of defence land complete all as specified and directed

SANJEEV ENTERPRISES

M/S SONU ENTERPRISES

A N BUILDERS