REPAIR REPLACEMENT OF INTERNAL WIRING ELECTRICAL FITTINGS FIXTURES RENEWAL OF BLDG EARTHING AND OTHER CONNECTED E M WORKS IN R O MD OTM ACCN AT BANASWADI AREA AND MD ACCN OF MEG UNDER GE N BANGALORE

Amount

Taking down carefully aluminium / copper wiring / power point wiring (light, fan, call bell socket or power circuits) complete and making good the disturbed surface of walls, ceiling etc incl painting with same colour of the back ground complete all as specified and as directed by Engineer-in-Charge.

Point Wiring complete concealed with 1.5 Sqmm single core PVC insulated unsheathed cable 1100 volts grade multi stranded with FRLS copper conductor conforming to IS 694 drawn through and incl non-metalic rigid PVC conduit medium grade ISI marked incl accessories concelaed type wiring incl GI/ MS branded sunken boxes concealed on walls including plastic/heylam laminated sheet top cover 3 mm thick fixed with cadmium plated iron screws for housing switches, switch socket outlets, fan regulators etc., incl provision of 1.5 Sqmm PVC insulated single core multi stranded copper conductor cable as earth continuity conductor and connecting to common earth dolly, all as specified and as directed.for the following :- One light point controlled by one switch

All as per item No. 2 above but for One fan point controlled by one switch/regulator

All as per item No. 2 above but for One light point controlled by 2 way switch

All as per item No. 2 above but for One 3 pin socket out let 5 Amps on independent board

All as per item No. 2 above but for One bell/buzzer point controlled by bell push

All as per item No. 2 above but for One 3 pin socket out let 5 A on same board

All as per item No 2 but concealed wiring drawn through existing PVC conduit. One light point controlled by one switch

All as per item No. 8 above but for One fan / Exhaust point controlled by one switch / regulator

All as per item No. 8 above but for One light point controlled by 2 way switch

All as per item No. 8 above but for One 3 pin socket out let 5 Amps on independent board

All as per item No. 8 above but for One bell/buzzer point controlled by bell push

All as per item No. 8 above but for One 3 pin socket out let 5 A on same board

Point Wiring concealed type (For modular type wiring) with 1.5 Sqmm single core PVC insulated unsheathed cable 1100 volts grade multi stranded with FRLS copper conductor conforming to IS 694 drawn through and incl non-metalic rigid PVC conduit medium grade ISI marked incl accessories concelaed type wiring incl GI/ MS branded sunken boxes of suitable module concealed on walls including modular frame and cover of suitable module fixed with cadmium plated iron screws for housing modular type switches, switch socket outlets, fan regulators etc., incl provision of 1.5 Sqmm PVC insulated single core multi stranded copper conductor cable as earth continuity conductor and connecting to common earth dolly, all as specified and as directed.for the following:- One light point controlled by one switch

All as per item No. 14 above but for One fan/Exhaust point controlled by one switch/regulator

All as per item No. 14 above but for One light point controlled by 2 way switch

All as per item No. 14 above but for One 3 pin socket out let 5 Amps on independent board

All as per item No. 14 above but for One bell/buzzer point controlled by bell push

All as per item No. 14 above but for One 3 pin socket out let 5 A on same board

Point wiring complete with 1.5 Sqmm single core PVC insulated unsheathed cable 1100 volts grade multi stranded with FRLS copper conductor conforming to IS 694 drawn through and incl PVC Casing & Caping ISI marked incl accessories surface type wiring incl 1.6 mm thick MS sunken boxes concealed on walls including laminated sheet top cover 3 mm thick fixed with cadmium plated iron screws for housing the switches, switch socket outlets, fan regulators etc., incl provision of 1.5 Sqmm PVC insulated single core multi stranded copper conductor cable as earth continuity conductor and connecting to common earth dolly, all as specified and as directed.for the following One light point controlled by one switch

All as per item No. 20 above but for One fan point controlled by one switch/regulator

All as per item No. 20 above but for One light point controlled by 2 way switch

All as per item No. 20 above but for One 3 pin socket out let 5 Amps on independent board

All as per item No. 20 above but for One 3 pin socket out let 5 A on same board

Point wiring complete with 2.5 Sqmm single core PVC insulated unsheathed cable 1100 volts grade multi stranded with FRLS copper conductor conforming to IS 694 drawn through and incl non-metalic PVC conduit medium density ISI marked incl accessories concealed type run on walls/ ceiling incl MS terminal boxes fabricated with 1.6 mm thick MS sheet concealed on walls with plastic laminated sheet top cover 3 mm thick fixed with cadmium plated iron screws for housing the switches, switch socket outlets, fan regulators etc., incl provision of 2.5 Sqmm PVC insulated single core multi stranded copper conductor cable as earth continuity conductor and connecting to common earth dolly, all as specified and as directed.

Point Wiring complete concealed drawn through existing conduit 2.5 Sqmm single core PVC insulated unsheathed cable 1100 volts grade multi stranded with FRLS copper conductor conforming to IS 694 drawn through existing non-metalic rigid PVC conduit medium grade ISI marked incl accessories concealed wiring incl GI/ MS branded sunken boxes of suitable mdodule concealed on walls including modular frame and cover of suitable module fixed with cadmium plated iron screws for housing modular type switches, switch socket outlets, fan regulators etc., incl provision of 1.5 Sqmm PVC insulated single core multi stranded copper conductor cable as earth continuity conductor and connecting to common earth dolly, all as specified and as directed.

Point wiring complete with 2.5 Sqmm single core PVC insulated unsheathed cable 1100 volts grade multi stranded with FRLS copper conductor conforming to IS 694 drawn through and incl PVC casing caping ISI marked incl incl accessories surface type wiring run on walls/ ceiling incl MS terminal boxes fabricated with 1.6 mm thick MS sheet concealed on walls with plastic laminated sheet top cover 3 mm thick fixed with cadmium plated iron screws for housing the switches, switch socket outlets, fan regulators etc., incl provision of 2.5 Sqmm PVC insulated single core multi stranded copper conductor cable as earth continuity conductor and connecting to common earth dolly, all as specified and as directed. Note for Item No 2 to 27 :- (i) The earth wire for the points in the same circuit can be looped from point to point (ii) Earth wire shall be taken inside the conduit (iii) Cost of terminal box is deemed to be included in the item rate quoted for point wiring (iv) Cost of a circuit of any length of cable from DB to any switch/ socket board to be included in point wiring. (v) Cost of cutting chases for conduits and making good to walls, in case of recessed or concealed conduit wiring will be paid separately in other items.

M&L for groove cutting in wall/floor and making good of disturbed wall/floor, painting of existing colour all as specified and directed by Engineer -in-Charge.

S&F LED batten suitable for indoor applications 20 Watts, 4 feet with extruded aluminium housing & integrated LED channel complete with all accessories including taking out old fittings all as specified and directed. Make: Bajaj, Cat No. BCLAB 20 WH LED P or equivalent Makes & model in Havells/Phillips/CG

S&F LED batten suitable for indoor applications 10 Watts, 2 feet with polycarbonate housing & integrated LED channel with white arcylic cover complete with all accessories including taking out old fittings all as specified and directed. Make: Bajaj, Cat No.BCLSB 10 WH or equivalent Makes & model

S&F 2' x 2' Recess mounted LED Luminaire 36 Watts white powder coated CRCA housing with LEDs seamless front frame with flate white high transmission arcylic cover complete with all accessories all including taking out old fittings as specified and directed. Make: Bajaj, Cat No : BZRSQL 36W GZi WH or equivalent Makes & model

S&F LED batten suitable for indoor applications 18/20 Watts,4 feet with polycarbonate housing & integrated LED channel with white arcylic cover complete with all accessories including taking out old fittings all as specified and directed. Make: Bajaj, Cat No.830192 18W CDL or its equivalent in Havells/ C & S, philips/CG

S&F 2' x 2' Recess mounted LED Luminaire 36 Watts white powder coated CRCA housing with LEDs seamless front frame with flate white high transmission arcylic cover complete with all accessories all including taking out old fittings as specified and directed. Make: Bajaj, Cat No : BZRSQL 36L GX D WH SD od BAJAJ / LTCRSLM36WATT2X2 of C & S / HLFPR22-36-CW-R of Halonix

S&F 2' x 2' Recess mounted mounted round LED pane fitting of 12 watt al. die cast body with premium diffuser to ensure glare free & even distribution of light.Make & Model No:BPSLR 12W WH of Bajaj or equivallant in Havells / C & S/ CG

Supply and fix Slim surface mounted round LED down lighter of 12 watt aluminium die cast body with premium diffuser to ensure glare free & even distribution of light.Make & Model No:BGSLO SLEEK SURFACE 12 W WH RD of BAJAJ or equivallant in Havells / Halonix/CG

Supply and Fix Modular switch 1 way 6A,1 module

Supply and fix Modular switch 1 way 16A, 1 module

Supply and fix Modular switch 2 way 6A,1 module

Supply and Fix Modular Bell push 6A 1 module

Supply and fix modular Socket, 6A - 2/3 pin combined 2 module

Supply and fix modular Socket 6A/16A - 2/3 pin combined 2 module,

Supply and fix modular type Fan step regulator, 120W - 2 module

S&F in repairs Switch piano flush button single pole two way 5 Amps all as specified and as directed.

S&F in repairs Angle holder PVC / polycarbonate type all as specified and as directed

S&F in repairs switch piano flush type single pole one way 5 Amps

S&F in repairs switch socket combination 5 pin 2 in 1, 5 A Flush type all as specified and as directed

S&F in repairs switch socket combination 2 in 1, 3 pin 5 and 15 Amps flush type universal all as specified and as directed

S&F in repairs socket outlet 2 in 1, 3 pin 5 A all as specified and as directed

S&F in repairs bell push flush type 5A all as specified and as directed .

S&F in repairs MCB SPN 240 volts 32/40 Amps complete all as specified and as directed

S&F in repairs MCB single pole 240 volts 6 to 32 Amps complete all as specified and as directed

S&F in repairs MCB TPN 415 volts, 10KA 'C' curve 32 to 63 Amps complete all as specified and as directed

S&F in repairs MCB TPN 415 volts, 10KA 'C' curve 100 Amps complete all as specified and as directed

S&F in replacement of MCB DB SPN 4 way double door type 240 volts with 200 Amps rated busbar as specified and as directed.

S&F in repairs MCB DB SPN 8 way double door type 240 volts with 200 Amps rated busbar as specified and as directed.

S&F in repairs MCB DB TPN 4 way with double door type 415 volts with 200 Amps rated busbar for housing MCBs as specified and as directed.

S&F in repairs ceiling rose, surface bakelite type 65 x 50 mm, 2 to 3 terminals all as specified and as directed

S&F in repairs stepped type electronic fan regulator flush Switch/socket type all as specified and as directed

S&F in repairs Ding Dong bell AC 230 volts single pole.

Provision of new sub main wiring 1100 volts grade multistranded FRLS copper conductors, two runs of single core 6 Sqmm along with one run of 6 Sqm PVC insulated single core multistranded copper conductor cable as earth continuity conductor drawn through suitable PVC conduit/ casing caping including taking down unsv submain wiring complete all as specified and as directed. Note:- 3 runs of cable, one run of conduit/casing caping will be measured as unit length.

Provision of new sub main wiring 1100 volts grade multistranded FRLS copper conductors, two runs of single core 4 Sqmm along with one run of 4 Sqm PVC insulated single core multistranded copper conductor cable as earth continuity conductor drawn through suitable PVC conduit/ casing caping including taking down unsv submain wiring complete all as specified and as directed. Note:- 3 runs of cable, one run of conduit/casing caping will be measured as unit length.

Provision of new sub main wiring 1100 volts grade multistranded copper conductors,four runs of single core 16 Sqmm along with 16 Sqmm PVC insulated two runs single core multistranded copper conductor cable as earth continuity conductor run along with suitable size of PVC casing caping including taking down unsv submain wiring complete all as specified and as directed. Note:- 6 runs of cable, one run of casing caping will be measured as unit length.

Provision of new three phase sub main wiring 1100 volts grade multistranded FRLS copper conductors, four runs of single core 6 Sqmm along with one run of 6 Sqm PVC insulated single core multistranded copper conductor cable as earth continuity conductor run through and including rigid PVC conduit pipe medium grade of suitable size conceled in walls including taking down unsv submain wiring complete all as specified and as directed. Note:- 5 runs of cable, one run of conduit will be measured as unit length.

M&L for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6mm thick buried directly in ground vertically to a depth not less than 2.25 mtr below ground level with top edge of earth plate at a depth not less than 1.5 mtr connected to galvanized earth lead wire 4 mm dia as earth lead up to 7.5 mtr long by means of nuts, bolts, thimbles,check nuts and washers etc made of galvanized iron connected to earthing test point all as shown in electrical plate No 3 of SSR Part-I 2010 and as specified or indicated and testing on completion incl earth work and excavation in any type of soil PCC (1:3:6) type C1 chamber, pre cost slab 40mm thick in cement concrete (1:2:4) type B1 with 8 mm dia MS bars reinforced at 10 cm centre to centre both ways incl funnel with watering pipe wire mesh and lugs, incl test point complete all as specified and as directed.

Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics including taking out old fittings. Make:- Bajaj, Cat No.:- BREP 25 W LED WH or Equivalent/ HLSLD -09- 36-CWL- R / LTESS36WlED/LS of C & S

Supply and fixing 30 W LED bldg security light fitting with pressure die cast housing along with prismatic polycarbonate difuser with IP 66 protection including taking out old fittings. Make:- Bajaj, Cat No.:- ENXT P 30L WH SY PC SD or equivalent Makes & model in Havells/ CG

S&F in Bracket made out of GI tubing medium grade 25 mm bore , approx length 1.5 m long including MS clamps made out of MS flat iron 25 x 6 mm , nuts, bolts, washers etc and including before fixing applying two coats of aluminum paint over a coat of red oxide primer including removing the old existing GI bracket from bldg complete all as specified and directed.

S&F ceiling fans complete with complete accessories, 230V, SP 1200 mm Sweep with BEE rating complete with all accessories and fixing the fan from ceiling rose with 3 core flexible copper wire 24/0.20 sqmm, etc all as specified and as directed Make :- Havells/CG/ Bajaj.

S&F in replacement PVC Fresh air fan of 250/ 300mm sweep 1200/1400 RPM with louver. Make CG / Usha / Orient / Phillips / Bajaj.

S&F in repairs Single pole & neutral enclosure 20 Amps & 240 V with two pin and earth plug and socket complete with one single pole MCB 20 Amps.

S&F MCCB 4 pole 415 volts 200 Amps 36 KA, Adjustable type including taking out old unserviceable MCCB complete all as specified and as directed

S&F MCCB 4 pole 415 volts 100 Amps 16 KA, Adjustable type including taking out old unserviceable MCCB complete all as specified and as directed

S&F in replacement of Vertical DB TPN 12 way suitable for MCCB upto 250 Amps as I/C, double door type 415 volts, IP :54 protection, door earthing, isolated neutral bar, mechanical impact strength IK 09 with insulated bus bar assembly, pre punched knockout with a detachable gland plate for better termination knockout , wire set with 16 sqmm phase and 10 sqmm neutral cable independent shield along with 200 Amps Ammeter and 500 Amps voltmeter including RYB lamp Make:- INDOASIAN Cat No. 812048. or its equivalent in makes given in PS

S&F in replacement of Vertical DB TPN 8 way suitable for MCCB upto 125 Amps as I/C, double door type 415 volts, IP :54 protection, door earthing, isolated neutral bar, mechanical impact strength IK 09 with insulated bus bar assembly, pre punched knockout with a detachable gland plate for better termination knockout , wire set with 16 sqmm phase and 10 sqmm neutral cable independent shield along with 200 Amps Ammeter and 500 Amps voltmeter including RYB lamp Make:- INDOASIAN Cat No. 812042. or its equivalent in makes given in PS

Disconnecting and taking down the ceiling fan wall mounted fan 1200mm / 1400mm sweep, preparing the surfaces, filling cavities with filler, after cleaning all dust, spray painting with one finishing coat of synthetic enamel paint including writing MES NO and replacing the split pin, rubber pully etc., including refixing and connecting the same complete all as specified and as directed.

Dismantling /opening the ceiling fan of 1200 mm sweep of any make and type, removing the old defective winding carefully, cleaning the inner parts and rewinding with the same gauge supper enamelled copper conductor of good insulation, varnishing, drying and reassembling complete all as specified and as directed.

Dismantling /opening the ceiling fan of 1400 mm sweep of any make and type, removing the old defective winding carefully, cleaning the inner parts and rewinding with the same gauge supper enamelled copper conductor of good insulation, varnishing, drying and reassembling complete all as specified and as directed.

Dismantling /opening the wall mounted fan of 300 mm sweep of any make and type, removing the old defective winding carefully, cleaning the inner parts and rewinding with the same gauge supper enamelled copper conductor of good insulation, varnishing, drying and reassembling complete all as specified and as directed.

Taking down exhaust fans 300mm / 450mm sweep from position by duly disconnecting electric lines, preparing the surfaces, filling cavities with filler, after cleaning all dust, spray painting with one finishing coat of synthetic enamel paint including writing MES NO and replacing the split pin, rubber pully etc., including refixing and connecting the same complete all as specified and as directed.

Dismantling /opening the exhaust fan of 300 mm sweep of any make and type, removing the old defective winding carefully, cleaning the inner parts and rewinding with the same gauge supper enamelled copper conductor of good insulation, varnishing, drying and reassembling complete all as specified and as directed.

Dismantling /opening the exhaust fan of 450 mm sweep of any make and type, removing the old defective winding carefully, cleaning the inner parts and rewinding with the same gauge supper enamelled copper conductor of good insulation, varnishing, drying and reassembling complete all as specified and as directed. Note for Sl item No. 75 to 81 :- Cost of spares such as bearing/capacitor/bush/flexible cable/plastic cup etc will be measured and paid separately. Labour element is included in quoted rate.

Supply only ball bearing of various sizes / make as required for ceiling fans / wall mounting / exhaust fan including greasing complete all as specified and as directed.

Supply only Gun metal bush of any size/make suitable for ceiling fans all as specified and as directed.

Supply only capacitor 2.5 Mfd suitable for ceiling / exhaust /wall mounting fans complete all as specified and as directed.

Supply only capacitor 4.0 Mfd suitable for ceiling / exhaust/wall mounting fans complete all as specified and as directed.

Supply only PVC flexible cable twin twisted core of 23/0.0076 size multi stranded copper conductor suitable for connecting ceiling fans / exhaust /wall mounting fans complete all as specified and as directed.

Supply only Rubber bush with MS bolts, nuts & washers with 'U' clamps for ceiling fans complete all as specified and as directed.

Supply only plastic cup with screw for ceiling fans complete all as specified and as directed.

Inspection, taking down, dismantling of geysers of any type/capacity, cleaning, descaling, reassembling & reinstallation on the old place incl hydraulic pressure testing of HPRV & container with hand operated hydraulic pump complete after necessary repair/replacement of spare parts, brazing inner tank all as specified & as directed. Note : spare parts shall be measured & paid separately.

Supply only 1.5 KW type push/thread.

Supply only 2.0 KW type push/thread.

Supply only Thermostat suitable for 25/50 Ltrs capacity.

Supply only Indicator lamp square/round./washers /bushes

Supply only Safety valve/high pressure valve ISI marked.

Preparation old painted surface of geyser any capacity & painting the geyser completely after cleaning & applying the same one coat of spray paint of white enamel complete all as specified & as directed.

GS TRADERS

Vasavi Electricals

EMPEROR ARCHITECT

M.G. Enterprises