Providing Special Repair works for the existing 38 Nos. of PC/HC quarters, 2 Nos. of SI quarters at Mettupalayam in Coimbatore District.

Amount

37.1 : White washing 3 coats (slaked)

51.Supply and fixing of HDPE water tank 700 liters capacity

52 : PVC Water supply (ASTM) a. 32 mm dia

b. 25 mm dia

ANNEXURE 2.1.3 : Filling CS sand (using crushed stone sand)

6.2.1.1 : Brick work in C.M. 1:5 (F& B) using Fly ash bricks of size 230x110x70mm (using crushed stone sand) with admixture

10.2.1.1 : Brick partition work in C.M. 1:4 using Fly ash bricks of size 230x110x70mm (using crushed stone sand) 110 mm tk (B.P.) with Admixture f) In Forth floor

14.1.1.II : Precast cupboard slab 40 mm tk using standardised concrete mix M20 grade.(using crushed stone sand) a) In Foundation and basement

23.2.1 : 4mm thick pin headed Glass panels with Aluminium beedings

26.1 : Flooring in C.C.1:5:10 (using crushed stone sand)

32.1.1 : Finshing the top of Terrace floor with Pressed tiles (23cmx23cmx20mm) mixed with Water proofing compound (using crushed stone sand)

33.1 : Plastering in C.M. 1:5, 12 mm tk. (using crushed stone sand) Mixed with Super Plasticiser

35.1.2: Spl. Ceiling plastering in C.M. 1:3,10 mm tk.(using crushed stone sand) Mixed with Super Plasticiser

43.1 : Fabrication of Mild steel / RTS grills (without cement slurry) for all sizes of rods.

44.6 : PVC SWR 110 mm dia with ISI mark type- A for Rain water down fall pipe

50.6.1 : Precast slab 50 mm tk.in C.C. 1:3:6 with fibre (using crushed stone sand)

54.1.1 : S & F of 15mm dia half turn CP long body tap

54.2.1 : S & F of 15mm dia half turn CP short body tap

56.4.2 : S&F of Indian Water Closet white glazed (Oriya type) of size 580 x 440mm with PVC SWR grade P' or "S' trap - Other than G.F. (using crushed stone sand)

58.3 : PVC SWR pipe (Soil line) with ISI mark - type 'B'. a. 110 mm dia.

b. 75 mm dia.

ANNEXURE II A1: Clean removal of the old cement plastering both inside and outside from the existing walls of brick masonry and racking out joints to 20mm deep without damaging the existing structure and surroundings and clearing the debris away from the site

A2: Painting two coats with Plastic Emulsion PAINT over the existing scrapped wall including thorough scrapping the old wall surface

A3: Painting the old walls with two coats of Oil Bound Distemper of approved brand over existing thorough scrapped wall surfaces

A4: White washing two coats using clean shell lime slaked including cost of lime, gum, blue, brushes, including scaffolding etc.

A5: Dismantling the damaged Pressed Tiles without affecting the adjacent structures including the cost of required tools and plants and scaffolding, if necessary and clearing the debris away from the site etc., all complete and as directed by the departmental officers

A6: Pointing with CM 1:3 (One of cement and three of CS sand) 12mm thick mixed with water proofing compound at 2% by weight of cement used and pointed neatly with the same cement mortar mixed with water proofing compound including curing etc.

A7: Supplying and fixing of water tight bulk head fittings with guard, suitable for LED lamp including necessary connections, cost of materials etc., complete

A8 : Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming to ISI 694/1990, (open wiring) a) Light Point with Ceiling rose

b) Light Point without ceilling rose

A9: Supply and fixing of 4 feet long 18 watts LED tube light fitting

A10: Supply, delivery and fixing of 48" (1200 mm) Fan with ISI mark with Eletronic Dimmer including labour charges for fixing

M K SARAVANAN (BID ID -1140180)

SRI SABARI ASSOCIATES (BID ID -1138131)

M/s.V.S.D CONSTRUCTION (BID ID -1141581)