Internal electrical repair/maintenance of partial rewiring with switch board,switches, socket outlet, MCB board,main switch and earth continuity etc at Qtr no B/5,SPL 3A/2,SPL 3B/1,SPL 3A/3,2A-2,WB-52 under G M Unit Kathara.

Amount

Wiring for light point/fan point/exhaust fan point/call bell point with 1.5 sq.mm FR PVC insulated copper Conductor single core cable in surface/Recessed PVC conduit, with Modular type Switch, phenolic laminated sheet, Suitable size M.S box and earthing the Point with 1.5sqmm. FR PVCinsulated Copper conductor single core cable etc. as required. (Group –“C”)

Wiring for circuit/sub main wiring along with earth wire with the following sizes of PVC insulated copper conductor, single Core cable in surface/recessed PVCConduit as required (2x1.5Sq.mm+ 1.5sq.mm earth wire)

Wiring for circuit/sub main wiring along with earth wire with the following sizes of PVC insulated copper conductor, single Core cable in surface/recessed PVCConduit as required (2x2.5Sq.mm+ 2.5sq.mm earth wire)

Wiring for circuit/sub main wiring along with earth wire with the following sizes of PVC insulated copper conductor, single Core cable in surface/recessed PVCConduit as required (2x4Sq.mm+ 4sq.mm earth wire) for main service connection

Supplying and fixing following modular switch/Socket on the existing modular plate switch box/cover including connections but excluding modular plate etc. as required. (5/6 Amp Switch).

…………Do…………….5/6Amps. Socket outlet

…………Do…………...15/16 Amps Switch

………..Do…………… 15/16 Amps Socket

Supplying and fixing of modular type electronic regulator Supplying & fixing stepped type electronic fan type regulator on the existing modular plate switch box including connection but excluding modular plate etc. as required.

Supplying and fixing metal /PVC box of 150mm X 75mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in FRLSont including providing and fixing 3 pin 5/6 amps socket outlet and 5/6 amps modular type switch, connection, painting etc. as required. (For light plugs to be used in non residential buildings).COST FOR EACH

Supplying and fixing metal /PVC box of 180mm X 100mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in FRLSont including providing and fixing 6 pin 5/6 & 15/16 amps socket outlet and 15/16 amps modular type switch, connection, painting etc. as required.COST for EACH

Supplying and fixing of following sizes of medium class PVC conduit/ cashing along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.(20mm dia PVC conduit/ cashing )

Supplying and laying 6 SWG G.I. wire at 0.50 metre below ground level for conductor earth electrode, including connection/ termination with GI thimble etc. as required. Details of cost for 1 Metres

Earthing with G.I. earth plate 600mm x 600mm x 6mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7mtr. long etc. with charcoal/coke and salt asrequired.

Supplying, installation, testing and commissioning of following capacity overhead distribution bus trunking with aluminium bus bars having current density of 130 A/ sq cm at nominal current rating in 1.6mm thick IP 42 sheet steel enclosure in convenient sections with provision of tapping points for use on, 3 phase, 4 wire, 415 volts, 50 Hz, A.C. supply including jointing of sections, bends, earthing with 2 runs of galvanised iron strips, all installation accessories etc. as required.

Supplying and fixing brass batten/ angle holder including connection etc. as required

Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required.32 A TP&N Details of cost for one each

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 6 way, Double door . Details of cost for one

Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden block including connection etc as required.

Providing of PVCboard 8''x10''

Providing of PVC board 4''x6''

Total impact of GST for the purpose of CTC

M/S SHYAM ELECTRICALS

M/S S K ELECTRICAL