Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹19.4 LAccepted-AOC C O GENERAL DAIRY VILLAGE BARAGAON SRI GANGANAGAR 335 001 | GANGANAGAR | RAJASTHAN | 335001 | L1 | Accepted-AOC Being First Lowest | |
| 2 | L2₹20.0 L+₹8,684 (0.44%)Rejected-Finance | L2 | Rejected-Finance Other Than First Lowest | |
| 3 | L3₹20.3 L+₹45,465 (2.29%)Rejected-Finance | L3 | Rejected-Finance Other Than First Lowest | |
| 4 | L4₹21.2 L+₹1.3 L (6.74%)Rejected-Finance RM 01 RIDHISIDHI I SRI GANGANAGAR 335001 RAJ | SRI GANGANAGAR | SRI GANGANAGAR | RAJASTHAN | 335001 | L4 | Rejected-Finance Other Than First Lowest | |
| 5 | L5₹23.1 L+₹3.2 L (16.2%)Rejected-Finance | L5 | Rejected-Finance Other Than First Lowest |
Tender Value
Refer Docs
EMD Value
₹52,500
Closing Date
5 Jul 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Lalgarh Jattan
GE Lalgarh Jattan
SPL REPAIR TO BLDG NO P-19 AT LGJ MIL STN
2023_MES_601351_1
8934-14/GE/23-24/
Open Tender
Civil Works
Item Rate
180 days
GE Lalgarh Jattan
As per Tender Documents
8 documents required · 8 mandatory
₹500
GE Lalgarh Jattan
₹52,500
Yes
4 Sept 2023
6 Jun 2023
7 Jul 2023
6 Jun 2023
5 Jul 2023
21 Jun 2023
Amount
Demolition of cement concrete of any description (unreinforcement concrete) and in any position not otherwise specifically provided for complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises all as specified and as directed.
Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone work and precast concrete articles all as specified and directed by Engineer-in-Charge.
M&L for brick work with fly ash bricks straight or curved on plan exc. 6 metre mean radius built in cement mortar (1:6) all as specified & directed.
Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc. complete all as specified and directed by Engineer-in-Charge.
Demolition of reinforced cement concrete of any description (reinforcement cut as required to facilitate) demolition and in any position not otherwise specifically provided for complete all as specified and directed.
Formwork to chajjas, troughs and similar items including edges , for rough surface of concrete, complete all as specified and directed by Engineer-in-charge
M&L for reinforced cement concrete 1:1.5:3 type A-1 using 20mm graded stone aggregrate in Chajjas; complete all as specified and directed by Engr-in-charge. Note : Reinforcement shall be measured and paid seperately.
S&F for TMT bars (Fe-500D) 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and directed.
Taking down cement plaster on brick / stone walls including raking out joints, hacking for key, scrubbing down with water all as directed
M&L for rendering 15mm thick on brickwork or concrete surfaces in cement mortar 1:6 on wall and finished fair even and smooth without using extra cemnt all as specified and directed.
M&L for rendering 15mm thick on brickwork or concrete surfaces in cement mortar 1:4 on wall and finished fair even and smooth without using extra cemnt all as specified and directed.
M & L rendering 5 mm thick in cement mortar (1:3) on fair faces of concrete surfaces of ceiling finishedeven and smooth without using extra cement complete all as specified & directed.
M&L for Virified Ceramic tiles 8 to10 mm thick (square/ rectangular) light shade polished, area of each tiles not exceeding 0.36 sqm, 13086 etc. over and including 15 mm thick screed bedding in cement mortar 1:6, set and jointed in neat cement slurry and pointed in white or coloured cement to match the floor all as specified and directed.
M&L for Vitrified Ceramic tiles 8 to10 mm thick (square/ rectangular) light shade polished, area of each tiles not exceeding 0.36 sqm, on vertical surface such as skirting/dados over and including 10 mm thick backing coat in cement mortar 1:4, set and jointed in neat cement slurry and pointed in white or coloured cement to match the floor complete all as specified and directed by Engneer -in-Charge
M&L for joint free non skid ceramic coloured tiles 7 to 8 mm thick (square/ rectengular) area of each tile exc 0.18 Sqm but not exc 0.38 Sqm in floor over and including 15 mm thick screed bedding in cement mortar 1:6, set and jointed in neat cement slurry and pointed in coloured cement to match the floor all as specified and directed.
M&L glazed ceramic coloured tiles 450 x 300 x 7 mm thick joint less tiles as in skirting, dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile laid over and including 10mm thick rendering in cement mortar (1:4) including necessary cutting as per site requirement complete all as specified and directed
Dismantling Stone slabs and tiles of any description or thickness in floors, aprons etc and laided, bedded and pointed in any mortar complete all as specified and directed.
M&L for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 15 mm thick screed bed in CM 1:6 complete all as specified and directed.
M & L Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over and including 15 mm thick screed bedding in cement mortar 1:6, all as specified and directed.
M & L Machine cut kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over and including 10 mm thick rendering in cement mortar 1:4, complete all as specified and directed
Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations all as specified and directed
M&L for two coats of acrylic distemper on newly plastered surfaces of walls paint over 3mm thick wall care putty including preparation of surfaces complete all as specified and directed by Engr-in-Charge.
M&L for complete removal of existing treatment and applying two coats of acrylic distemper over and including 3 mm thick wall care putty on plastered surfaces of walls including preparation of surfaces complete all as specified and directed by Engineer-in-Charge.
M & L for complete removal of existing treatment from wall and applying two coats of cement base paint complete all as specified and directed
M&L for preparation of old plastered or pointed surfaces of wall and applying two coats of white wash complete on wall all as specified and directed by Engineer-in-charge.
M&L preparing newly plastered surface of ceiling and applying three coats of white wash on wall complete all as specified & directed by Engr-in-charge
M & L for one coat of white wash on old plastered surface incl preparatio etc complete on ceiling
M&L for preparation of new plastered or pointed surface of walls and applying two coats of cement base paint complete all as specified & directed by Engr-in-charge.
M&L for 75 mm thick PCC 1:3:6 type C-2 using 40 mm graded mechanically crushed stone aggregate as in plinth protection finished even and smooth without using extra cement with & including 10 mm wide, 30 mm deep joints at the rate of 3.00 mtr centre to centre and at every turning & filling the joints with bitumen & sand mixture complete all as directed.
Dismantling of brick tiles in floor or roof laid dry and pointed in cement morter complete all as specified and as directed by engineer-in-Charge.
Demolition mud in roofs, any thickness, including plastering and leeping complete all as specified and directed.
M&L 40mm thick brick tiles laid flat & joints grouted flush in cement mortar (1:3) bedded over 15mm thick cement morter (1:6)mixed with 5% of crude oil by weight of cement on complete all as specified and directed by Engr-in-Charge.
,---ditto-- all as per item No.33 above except tiles
M&L for PCC (1:5:10) using 40mm graded stone aggregate as filling of sunken floors/bottom and side of drain complete all as specified & directed by Engr-in-charge.
M&L for water proofing treatment to RCC sunken slab as specified below and directed (a) Cleaning the surface with wire brush/coir brush, removing all loose materials like dust particles, dirt etc (b) Applying 15 mm thick plaster in CM 1:3 with WPC on vertical surfaces(c) Creating fillet coving of 50X50mm size with polymer modified mortar on the junction of slab and vertical surfaces (d) Apply first coat of two component modified polymer coating on the horizontal and vertical surfaces (e) Provn of glass fiber mesh of 2X2mm immediately on above coating (f) Apply second coat of two component modified polymer coating as per requirement (g) Cement concrete 1:5:10 over the coating as per requirement (h) Joining the sanitary pipes with the water proofing tape having ability of more than 1.5mm (i) Filling the gap between wall opening and sanitary pipe with non shrink cementanious grout complete all as specified Note : (i) The treatment shall be carried out as per the manufacturers instructions and as directed by Engr-in-charge. The name of firm shall be got approved from GE before carrying out the work. (ii) The plan area of floor and vertical surfaces shall be considered for payment (iii) PCC filling in sunken area will be measured and paid seperately
M&L for Roof treatment to RCC roof as follows:- (a) Cleaning the roof surfaces thoroughly using wire brusehes to remove sharp projections, cleaning joints, washing, drying and removing all dirt/dust to receive concrete padding/plaster etc. (b) Providing 15 mm thick screed bed or bedding layer of cement mortar (1:4) with WPC, finished even and smooth without using extra cement. (c) Providing one coat of approved bituminous primer @100 gms per sqm, over dried plastered surface. (d) Laying 3 mm thick APP membrane,(mineral finish) reinforced with non woven polyster fabric, by torch application. The overlapping while torching shall be 75 mm on longitudinal direction and 100 mm on the transverse direction complete all as specified and directed by E-in-Charge. Make : STP Dr Fixit/Pidilite, Texsa India Ltd/Tikitar Dansona/Bengal Bitumen/ M/S TORCHTAR MEMBRANE Notes : (i) All joints and change in directions should be covered wih cement mortar (1:3) mixed with SBR latex @ 200 ml/bag of cement/as per site reqmt and cured well before laying membrane by torching. (ii) All angles and abuttments should be sealed well with extra care to ensure full bondage. (iii) Water proofing treatment shall be got carried out by approved authorised applicator of manufacturer only. The name of firm shall be got approved from GE before carrying out the wk. (iv) The independent testing of membrane for technical parameters given in particular specifications shall be carried out from Govt approved labs having fascilities for testing of membrane. (v) The guarnatee of treatment shall be for min 10 yrs reckoned from date of completion of whole wk.
M&L PCC 1:2:4 type B-1, using (20mm graded stone aggregate) as in roof kerbs or mud stops, rounded or chamfered on edges including necessary form work etc complete all as specified & directed
Taking down chowkhats or frames n.exc 1.5 sq. m each with shutters (without taking off shutters from the frame) complete all as specified and directed by Engr-in-Charge.
Taking down chowkhats or frames with shutters (without taking off shutters from the frames) area exceeding 1.50 sqm but not exceeding 4.00 sqm each and removing from site all as specified & directed
Taking down shutters of any description exc 1.00 sqm but not 2.00 sqm each including removing to store complete all as specified and directed.
Taking down existing shutter and refixing in same opening shutters of any description exc 1.0 Sqm but not exc 2.0 Sqm each all as specified and directed. (Note:- 'Refixing' includes taking down, easing and adjusting and also refixing builders hardware as required including renewal of unserviceable screws, etc.)
S&F for powder coated aluminium frame for doors, windows, ventilators with one or more rebates including jointing cleats, screws etc complete with powder coating on aluminium sections, minimum thickness of poweder coating shall be 50 micron as per the specification. The horizontal members and vertical members adjacent to wall shall be fixed with floor, ceiling, walls and cills where required with the help of rawl plugs and screws or with fixing clips or with expansion hold plate fastners. Aluminium section shall be smooth, rust free, straight, mitred and jointed mechanically whereever required complete in all respect all as specified & directed by Engr-in-Charge. Make of Al Section : Jindal / Hindalco / NALCO
S&F for powder coated anodised aluminium window and ventilator shutters, side hung type without sash, aluminium sections weighing exc 0.55 Kg/m (1.50 to1.80mm th) including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150 mm long (01 No) hinges type B-21 100 mm long (2 Nos) suitable handle (01 No) in each window shutter and necessary accessary as required complete all as specified and directed by Engineer-in-charge (Note : Glass will measured and paid separately)
S&F for 4.8 mm thick sheet glass, ordinary quality and glazing with aluminium snap beading of any size of glass in each pane with solar control film 25 micron reflective type sticked to glass panes as per instructions of manufactuers complete all as specified & directed.
S & F powder coated standard aluminium anodised grill size of mesh 75 mm x 75 mm and 8 mm thick section using U channel 25 x 12 mm all as specified and directed.
Supply and fixing of Fibre glass Reinforced plastic (FRP) door frame of required built in colour in three legged of cross-section 90mm x 45mm having single rebate of 32mm x 15mm to recieve shutter of 30mm thick including laminated door frame moulded with fire retardant grade unsaturated polyster resin and chopped strand mat(CSM) also door frame laminated shall be 2mm thick and shall be filled with suitable wooden block of 2nd class hard wood in all three legs frame shall be covered with fibreglass from all sides MS stay flat iron 25mm x 3mm shall be provided at the bottom to steady the frame complete all as specified and as directed by Engineer-in- charge.
Supply and fixing of 30 mm thick glass fibre reinforced plastic (FRP) paneled door shutter conferming to IS:14856-2000 of required colour and made with fire retardant grade unsaturated polyster resin,moulded to 3mm thick FRP laminated for forming hollow rails and style with suitable second class hardwood timber block inside at required places for fixing of fittings,cast molithically with 5mm thick FRP laminated for panels including fixing to frames,complete all as specified and as directed by Engineer-in- charge.
S & F framed work as in chowkats of doors of angle iron confirming to Gde Fe 410-0 or Fe 310-0 complete all as specified and directed by Engineer-in-Charge
Supply & fixing 35mm thick 2nd class hard wood factory made plain framed panelled shutters (Two panels) with lock rail and panel inserts of comercial veneered particle board with commercial veneering on both faces. The size of rails and styles as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated all as specified & directed
S&F 35 mm thick 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) all as directed.
S&F 100 mm long butt hinges stainless steel complete all as specified & directed by Engr-in-charge.
S&F aluminium anodised barrel tower bolt of extruded section 200mm long all as specified & directed by Engr-in-charge.
S & F 125 mm long aluminium handle, cast type all as directed by Engr-in-Charge
S & F 150 mm long extruded aluminium alloy handle fabricated type anodised all as directed
S&F 100 mm long butt hinge, medium weight, cold rolled mild steel complete all as specified and directed.
S&F 300 mm long mild steel sliding door bolts,, stove enamelled black, with bright bolt not less than 12 mm dia with 6 bolts and nuts, four on bolt clips and two on staple Clips all as directed.
S & F 300 mm, aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specidied and directed.
S&F as 300mm ordinary rat tail rod pattern springs including roller and roller plate complete mild steel fixed complete all as specified and directed by Engr-in-Charge.
M & L in repairs providing kitchen cabinet in required sizes at site made out of 18 mm thick one side decoative laminated sheet and shutters made out of 18 mm thick one side decoative laminated PVC sheet fixed with required brackets screws etc. The Cabinet andpanels shall be fabricated using adhesive and screws where ever required. All the edges shall be covered with 2 mm thick edge bonding tape or 90 degree edge bent finish as per make and specification approved by Engineer-in- Charge. Work shall be measured and paid for following items only :-
(a) PVC 18 mm Celluca Ply (Prelam) for shutters
(b) PVC sheet 18 mm prelam for frame, partition Shelves etc
S & F telescopic 45 cm long drawer slides channel-Zink plated complete all as specified and directed Make : Godrej or equivalent
S & F stainless steel soft colse crank hinges 100 mm size and shape as required all as specified and directed
S & F PVC 40 mm Magnetic catcher fixed with nut, screw and washer complete all as specified and as directed by Engineer-in-Charge
S & F 40 mm dia Cupboard/drawers knobs with nut, screw and washer or brass polished complete all as specified and directed by Engineer-in-Charge
S & F 100 mm size extuded, brass handles, fabricated type polished for cabinet shutter complete all as specified and directed.
S&F stainless steel wire cloth 0.63 nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples all as directed.
,---ditto-- all as per item No.66 above but fixed in repairs
S&F for 4 mm thick sheet glass tinted quality and glazing with oil putty/beading in squares exc 0.5 Sqm in each pane complete all as specified & directed.
S&F for 150 mm long floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring all as directed.
M&L for preparation of new or previously untreated wooden surface of any description not otherwise described over 10 cm width or girth and apply two coats of synthetic enamel paint over one coat of pink primer all as specified.
M&L for preparation of old painted wooden surface of any description not otherwise described over 10 cm width or girth and apply one coats of synthetic enamel paint all as specified.
M & L for painting steel and iron surfaces of any discription,over 10 cm width or girth, including preparation of previously untreated surfaces and one coat of red oxide and finish with two coats of synthetic enamel paint ordinary tint all as spefified and directed
M & L for painting steel and iron surfaces of any discription,over 10 cm width or girth, including preparation of new surfaces applying with two coats of synthetic enamel paint over coat of red oxide primer ordinary tint all as spefified and directed
S&F drapery stainless steel drapery rods, standarad quality, not less than 25/28 mm dia with heads, brackets and boths ends stainless caps , etc. all as specified and direced.
S&Fin repair vitreous china wash down water closet pan (pedestral pattern), white (excluding fixing bolts ,flushing cistern and flush pipe), eith seat cover white, including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etccomplete.
S&F in repairs PVC valve less, syphonic action type flushing cistern,10 ltrs capacity low level, white, with inlet ball valve, float, handle and flushing pipe/ bend 32 mm dia pipe and connection to pipe and flush pipe all as directed.
S&F in repair vitreous china wash hand basin of size 550x400mm, with brass chromium plated wase fitting long screwed , MS brackets shank fly nut flange end including cutting for and pinning in ends of brackets in 1:3 CM including 32mm dia chromium plated waste coupling/trap all as specified .
S&F in repair bib tap 15mm bore cast copper alloy chromium plated long body fancy type with capston head and cup screwed down, screwed for iron pipe all as specified.
S&F in repair two way bib cock 15mm bore with flange cast copper alloy chromium plated fancy type screwed for iron pipe brass ferrule etc complete all as specified and directed by Engneer -in-Charge
S & F in repair center hole wash hand basin mixer with 450 mm long braided hoses system, brass (cast copper alloy) chormium plated, mixer for mixing hot & cold water suitable for wash hand basin, screwed down for iron pipe 15 mm bore including taking down old valve any type complete all as specified and as directed by Engineer-in - charge
S & F in repair sink mixer with regular spout (W/M), brass (Cast copper alloy) chromium plated, mixer for mixing hot & cold water suitable for sink, screwed down for iron pipe 15 mm bore complete all as specified and directed by Engineer-in-Charge
S & F in repair 2-way angle cock 15 mm bore fancy type, cast copper alloy, chormium plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union, complete all as specified and directed by Engineer-in-charge
S&F in repair angle valve/stop valve 15 mm bore fancy type, cast copper alloy, chromium plated screwed down high pressure , screwed both ends for iron pipe or for union, complete, all as specified & directed by Engineer-in charge
S&F in repair brass chormium plated overhead shower 70 mm dia round shape single flow (ABS Body chrome plated with gray face plate) with rubit cleaning system with 240 mm arm & flange including fixing to 15 mm bore pipe complete all as specified and as directed by Engineer-in -charge ( Make : JAQUAR) (Shower Model No : Allied Cat No -EOS-491 & Make : JAQUAR, Arm Modle No -ALE-536A)
S & F in repair of wall mixer with "L" bend 115 mm long full system brass cast copper alloy chromium plated, mixer for mixing hot & cold water suitable for bathing, screwed down for iron pipe 15 mm bore complete all as specified and as directed by Engineer-in -charge
S&F in repair brass CP plated f health faucet with 1 mtr tube & hook complete all as specified and directed by Engneer -in-Charge
&F in repair stainless steel chromium plated jet spray (butter fly or ''L'' bend) suitable for EWC including 1m tube and necessary nut bolts complete all as specified and as directed by Engineer-in-charge.
S & F in repair brass chromium plated liquid soap dispenser complete all as specified and as directed by Engineer-in-charge.
Supply and fixing in repair glass corner shelf 200 mm with ABS brackets complete all as specified and directed by Engineer-in-Charge.
S & F in repair brass chromium plated pef Set of 6 complete all as specified and as directed by Engineer-in-charge.
S&F in repair chromium plated fancy type soap dish complete all as specified and directed
S & F in repair stainless steel kitchen plate rack made out with 1 mm thick sheet of size 24"x24"x 10" including taking down existing wooden plate rack complete all as specified and directed by Engineer-in-Charge
S&F in repair sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 485mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed by Engineer-in-Charge.
S&F in repair PVC connections 15 mm size with PTMT nuts of length 450 mm long all as directed.
S&F in repair tubular towel rail stainless steel 20mm dia 'D' type 60cm long between flanges complete all as specified and directed by Engineer - in- charge
Dismantling water tank (any type) 500 or 1000 litre capacity and removeing from site complete all as specified and directed by Engineer-in-Charge.
S&F 500 litre capacity ISI marked rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I complete all as specified and directed by Engineer-in-Charge.
S&F 1000 litre capacity ISI marked rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I complete all as specified and directed by Engineer-in-Charge.
S&F in repair gun metal globe or gate valve 20 mm bore with iron wheel head, screwed both ends for iron pipe all as specified
S&F in repairs 20 mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed. (minimum weight 15mm-142 gms/20mm-210 gms/25mm-455gms)
Taking down 15 mm dia steel GI tubing including all connectious fittings in any position including cleaning for re fixing the serviceable pipe all as directed.
All as per item No 102 above but 20 mm dia pipe
S&F 15 mm dia galvanised steel tubing medium grade including necessary fittings like sockets, tees, elbows, reducers, unions etc fixed to walls / ceiling complete all as directed.
All as per item No 104 above but fixing only
All as per item No 104 above but 20 mm dia pipe
Taking down eaves gutters and rainwater pipes (any size or any pattern), including all fitting, such as heads, shoes ,bends swan-necks etc, complete all as specified and directed by Engr-in -Charge.
S&F 110 mm dia bore PVC SWR pipe, single socketed in any length with rubber ring joints fixed with clamps to walls and including bend as per side requirement, all as directed.
Dismantling of cast iron pipes including fittings, jointed in cement mortar and taking out of trenches/wall if required upto 100mm dia complete all as specified and as directed by engineer-in-Charge.
S & F 100 bore of spun cast, cast iron soil, waste and vent pipes in any length with or without ears, with cement joint and laid in trenches or in floors cast iron complete all as specified and directed.
S & F cast iron 100 mm bore branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and directed.
S & F cast iron 100 mm bore Bends (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and directed.
S & F 75 mm bore of spun cast, cast iron soil, waste and vent pipes in any length with or without ears, with cement joint and laid in trenches or in floors cast iron complete all as specified and directed.
M & L in repairs of outlet 75 mm cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1, (1:2:4) complete all as specified and directed by Engineer-in-Charge.
S & F cast iron 75 mm bore branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and directed.
S & F cast iron 75 mm type plain bends (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and directed.
Supply & fixed Clamp for hanging/ fixing of 75mm/100mm CI pipes complete all as specified and directed by Engineer-in-Charge.
E/M Portion Taking down carefully unserviceable point wiring (light, fan, socket, bell, power etc) complete including (fittings such as switches, ceiling roses, pendants, regulators, sockets etc ), and making good disturbed surfaces of walls, floors etc to match with existing surfaces.
Taking down sheet metal enclosure, main switch, DB any make & type, etc and making good disturbed surfaces to match with existing surfaces.
Taking down sub main wiring for one light point contincluding conduit/casing capping of any size/capacity complete all as specified and making good disturbed surfaces to match with the existing surfaces
M&L for concealed Point wiring One Light point controlled by one, one way switch with two single core PVC insulate, unsheathed multistranded copper conductor cable of size 1.5 sq.mm (FRLS) drawn in and including electrical grade PVC conduit 20 mm dia concealed on wall/ceiling/floor including PVC insulated unsheathed earth wire with multi stranded copper conductor of size 1.5 sq.mm(FRLS) including MS shunken sheet metal box with modular sheet top cover of required module for mounting switches, sockets etc complete all as specified. complete all as specified and directed by Engr-in-Charge. Note - quoted rate shall include making good to the disturbed surfaces including plastering and painting to match with the existing colour for One Light point controlled by one, one way switch complete all as specified and directed by Engr-in-Charge. .
,--ditto--- all as per Serial item No 121 above, but for One ceiling/exhaust fan point controlled by one switch and regulator complete all as specified and directed by Engr-in-Charge.
,--ditto--- all as per Serial item No121 above, but for One 3 pin 5 amps switch socket on same board with other switches complete all as specified and directed by Engr-in-Charge.
,--ditto--- all as per Serial item No 121 above, but for One 3 pin 5 amps switch socket outlet point on independent board complete all as specified and directed by Engr-in-Charge.
,--ditto--- all as per Serial item No 121 above, but for One bell/buzzer point controlled by one bell puch complete all as specified and directed by Engr-in-Charge.
,--ditto--- all as per Serial item No 121 above, but for Two way point controlled by two way switch complete all as specified and directed by Engr-in-Charge.
,---ditto-- all as per item No. 121 above but point wiring with 4 sqmm multi stranded conductor cable and 4 sqmm unsheathed copper conductor earth wire for two in one 5 pin 15 Amp socket outlet on indep board.
Supply and fix Modular switch, 1 Way 6 A, 1 Module, 230 Volts grade all as specified and directed by Engineer-in-Charge
Supply and fix Modular switch, 2 Way 6 A, 1 Module, 230 Volts grade all as specified and directed by Engineer-in-Charge
Supply and fix Modular switch, 1 Way 16 A, 1 Module, including completed all as specified and directed by Engineer-in-Charge
Supply & fixing Modular bell push switch 6A, 1 Module all as specified and directed by Engineer-in- Charge
Supply and fix Modular Socket 1 Way 6 A-2/3 pine combine 2 Module, 230 volts gradecompleted all as specified and as directed by Engineer-in- Charge
Supply and fix Modular socket 6A/16A-2/3 pin combined 2 module including taking down old one complete all as specified and directed by Engineer-in - Charge
Supply & fix batton integrated LED light fitting 1 x20 integral sleek polycarbonate LED channel with white acrylic cover to roof/ceiling/wall with necessary wooden/PVCblocks etc and connecting with 2 core flexible PVC insulated multistranded copper conductor from ceiling rose to fitting complete all as specified and directed including taking down old one. Note : (i) with lumen efficiency in excess of 100 Lumans per watt and driver effeciency >85% (withpf>0.95) (ii) CRI >80 (iii) The warranty of LED fittings is 02 years after completion of the liability period
Supply and fix lamp hold insulated body with back plae for angle/batten fitting with LED of 09 watt complete all as specified and directed by Engr-in-Charge.
Supply and fix ceiling rose surface bakelite two to three terminals/plate 5 amps complete all as specified and directed by Engr-in-Charge.
Supply and fix sheet metal enclosure DB single pole and neutral for 240 volts 8 way with 200 Amps rated busbar flush/surface mounting double door complete all as specified and directed
Supply and fix verticle MCB DB 3 phase TPN 4 ways double door including MCCB 125 Amp 16 KA as incommer with bus barrating 200 Amp vertical type dust and vermin proof complete all as specified and directed
Supply and fix MCB SP 240 volt 6 amp 10KA complete all as specified and as directed.
Supply and fix MCB SP & N 240 volt 32 amp 10KA complete all as specified and as directed.
Supply and fix MCB TP & N 63 Amps 16 KA complete all as specified and as directed
Supply and fix MCB SP 240 volt 32 amp 10KA complete all as specified and as directed.
Supply and fixing PVC Blanking Plates with internal lock complete all as specified and as directed.
Supply & fixing bell AC 230 volt single pole all as specified & directed by Engineer-in- charge.
Material & Labour for Sub Main Wiring with two run single core 4 Sqmm PVC insulated unsheathed (FRLS) cable with stranded copper conductor drawn in PVC conduit & accessories Suitable size with and including 4 Sqmm copper green colour earth wire all as specified and directed by Engineer-in-Charge. NOTE-two run of 6 sq.mm & One run of 4 sq.mm & One run of PVC conduit with accessories shall be measured as One length.
M&L for earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6mm thick burried directly in ground vertically to a depth not less than 2.25 metre below ground level with top edge of earth plate at a depth of not less than 1.5 metre below ground level, earth plate surrounded by 15cm thick and packed layer of charcoal dust and common salt, connected to earth lead of GI wire 4 mm dia (8 SWG) by means of bolts, nuts and washers of the earth wire.galvanised iron or steel and thimbles and other end of the earth wire connected to earthing test point and protected by galvanised iron pipe light grade 15mm dia and water pipe 20mm dia GI light grade with funnel and wire mesh, PCC chamber in cement concrete (1:2:4) type B-1 and CI cover with frame all as shown in electrical plate No. 3 of MES Schedule Part-I of SSR-2009. Notes :- (i) 20 mm dia GI pipe for watering to be provided with a socket and plug and should be 10 cms above ground level. (ii) Outer edge of earth pit will be 1 metre away from the outer edge of PCC chamber. (ii) GI wire upto DBs earth connection is included in this item. (iii) Water pipe shall be provided in slanting position
Supply and fix sheet metal incl single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amp 240 Volts Complete all as specified and directed by Engr-In-Charge
S & F LED building security light fitting 45 watt with epoxy powder coated sheet aluminium housing, with epoxy powder coated CRCA sheet steel gray tray, clear acrylic cover and accessories complete incl street light bracket made out of 25 mm dia GI medium grade pipe 0.6 mtr long complete with 02 seats of FI clamps made out of 30 x 5 MS flat & nuts, bolts & washer including painting to clamp with two coats of aluminum silver paint over a coat of primer after taking down old U/S one complete all as specified and directed by Engineer-in-charge
S & F Modular step type fan regulator 120 watt , 2 module complete all as specified, 2 module complete all as specified and directed.
Supply and fix fresh air fan 23 mm sweep 240 Volt 50 Hz plastic body complete with louvers
Note:- The contract sum shall be calculated by deducting the amount shown in Credit Schedule attached to this tender, from total amount of Schedule 'A'/BOQ
ram rattan dass aggarwal
M/s Tarun Traders
KHANNA CONSTRUCTIONS
M/s Vikas Kumar Doda Contractor
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .