Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹31.5 LAccepted-AOC H NO 02 BALLUPUR ROAD DEHRADUN UK PIN 248001 | DEHRADUN | DEHRADUN | UTTARAKHAND | 248001 | L1 | Accepted-AOC BEING L1 | |
| 2 | L2₹34.2 L+₹2.5 L (7.83%)Rejected-Finance | L2 | Rejected-Finance OTHER THAN L1 | |
| 3 | L3₹36.1 L+₹4.3 L (13.7%)Rejected-Finance FLAT NO B 401 4TH FLOOR NAVADURGA CO OP HSG SOCIETY LTD PLOT NO 7 SECTOR 19A NERUR EAST NAVI MUMBAI THANE MAHARASHTRA 400 706 | NAVI MUMBAI | THANE | MAHARASHTRA | 400706 | L3 | Rejected-Finance OTHER THAN L1 | |
| 4 | L4₹36.2 L+₹4.4 L (14.0%)Rejected-Finance 22B HEMILTAN ROAD GEORGE TOWN PRAYAGRAJ UP 211001 | PRAYAGRAJ | UTTAR PRADESH | 211001 | L4 | Rejected-Finance OTHER THAN L1 | |
| 5 | L5₹36.5 L+₹4.7 L (14.9%)Rejected-Finance 139 11 104 MUTTHIGANJ ALLAHABAD UTTAR PRADESH 211003 | PRAYAGRAJ | UTTAR PRADESH | 211003 | L5 | Rejected-Finance OTHER THAN L1 |
| Sl No | Description | Qty | Unit | creative construction co. L6 | DK Builders L5 | Comnet technologies L7 | M/s VIJAY TRADERS L1 | M/S VIVEK DUBEY L4 | ROHIT CONSTRUCTION L3 | M/S AVANI TRADERS L8 | M/s Meena Engineering Enterprises L9 | aiecro engineering works and consultants L2 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Demolition of brick work built in cement mortar of any description including all quions arches, pillars, etc complete all as specified and directed. | 5 | Cum | 300 ₹1,500 | 150 ₹750 | 5 ₹25 Lowest | 200 ₹1,000 | 836 ₹4,180 | 250 ₹1,250 | 250 ₹1,250 | 450 ₹2,250 | 441.94 ₹2,209.7 |
| 2.00 | Taking down cement plaster on brick or stone walls incl wall tiles etc. with raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed | 350 | Sqm | 10 ₹3,500 | 15 ₹5,250 | 5 ₹1,750 Lowest | 20 ₹7,000 | 40 ₹14,000 | 50 ₹17,500 | 50 ₹17,500 | 45 ₹15,750 | 54.94 ₹19,229 |
| 3.00 | M&L for brickwork with sub class 'B' bricks (old size), straight or curved on plan exc 6 m mean radius, built in CM 1:6 complete all as specified and directed. | 3 | Cum | 4,300 ₹12,900 | 4,000 ₹12,000 | 4,200 ₹12,600 | 4,200 ₹12,600 | 4,500 ₹13,500 | 4,200 ₹12,600 | 4,500 ₹13,500 | 4,500 ₹13,500 | 3,875 ₹11,625 Lowest |
| 4.00 | M&L for half brick work with sub class 'B' bricks (old size) straight or curved on any radius built in CM 1:4 complete all as specified and directed. | 10 | Sqm | 400 ₹4,000 | 550 ₹5,500 | 540 ₹5,400 | 650 ₹6,500 | 500 ₹5,000 | 1,100 ₹11,000 | 1,050 ₹10,500 | 550 ₹5,500 | 372.59 ₹3,725.9 Lowest |
| 5.00 | M&L for rendering 15mm thick in CM 1:6 on fair faces of brick work or concrete surfaces complete all as specified and directed | 100 | Sqm | 210 ₹21,000 | 150 ₹15,000 | 175 ₹17,500 | 160 ₹16,000 | 170 ₹17,000 | 201 ₹20,100 | 195 ₹19,500 | 160 ₹16,000 | 143.37 ₹14,337 Lowest |
| 6.00 | M&L for rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces complete all as specified and directed | 200 | Sqm | 220 ₹44,000 | 140 ₹28,000 Lowest | 175 ₹35,000 | 170 ₹34,000 | 180 ₹36,000 | 210 ₹42,000 | 205 ₹41,000 | 170 ₹34,000 | 163.12 ₹32,624 |
| 7.00 | M&L for rendering 10mm thick in CM 1:3 on ceiling surfaces of RCC or brick complete all as specified and directed. | 50 | Sqm | 180 ₹9,000 | 150 ₹7,500 | 175 ₹8,750 | 120 ₹6,000 | 180 ₹9,000 | 195 ₹9,750 | 190 ₹9,500 | 150 ₹7,500 | 107.87 ₹5,393.5 Lowest |
| 8.00 | M&L for preparing of newly plastered ceiling surface and applying three coats of white wash complete all as specified and directed. | 100 | Sqm | 15 ₹1,500 | 9 ₹900 | 18 ₹1,800 | 8 ₹800 Lowest | 20 ₹2,000 | 35 ₹3,500 | 32 ₹3,200 | 12 ₹1,200 | 19.7 ₹1,970 |
| 9.00 | M&L for preparing of newly plastered wall surface and applying two coats of cement base paint over a coat of cement wash complete all as specified and directed. | 100 | Sqm | 35 ₹3,500 | 18 ₹1,800 Lowest | 25 ₹2,500 | 20 ₹2,000 | 40 ₹4,000 | 40 ₹4,000 | 42 ₹4,200 | 28 ₹2,800 | 53.7 ₹5,370 |
| 10.00 | M&L for Preparing new wall surface and applying two coats of OBD over a coat of primer and over 3 mm wall care putty complete all as specified and directed. | 100 | Sqm | 90 ₹9,000 | 85 ₹8,500 | 90 ₹9,000 | 60 ₹6,000 | 60 ₹6,000 | 54 ₹5,400 Lowest | 58 ₹5,800 | 200 ₹20,000 | 184.94 ₹18,494 |
Tender Value
₹50 L
EMD Value
₹1 L
Closing Date
2 Sept 2025, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE WEST PRAYAGRAJ
Garrison Engineer (West), New Canttt, Prayagraj- 211001
MULTIFARIOUS WORK INCLUDNG WELCOME MAINTENANCE IN CHHEOKI MIL STN PRAYAGRAJ
2025_MES_725752_1
8844/E8
Open Tender
Civil Works
Item Rate
180 days
NEW CANTT PRAYAGRAJ
As per Tender Documents
7 documents required · 7 mandatory
₹500
GE WEST PRAYAGRAJ
₹1 L
Yes
16 Oct 2025
12 Aug 2025
9 Sept 2025
12 Aug 2025
2 Sept 2025
26 Aug 2025
Amount
Demolition of brick work built in cement mortar of any description including all quions arches, pillars, etc complete all as specified and directed.
Taking down cement plaster on brick or stone walls incl wall tiles etc. with raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed
M&L for brickwork with sub class 'B' bricks (old size), straight or curved on plan exc 6 m mean radius, built in CM 1:6 complete all as specified and directed.
M&L for half brick work with sub class 'B' bricks (old size) straight or curved on any radius built in CM 1:4 complete all as specified and directed.
M&L for rendering 15mm thick in CM 1:6 on fair faces of brick work or concrete surfaces complete all as specified and directed
M&L for rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces complete all as specified and directed
M&L for rendering 10mm thick in CM 1:3 on ceiling surfaces of RCC or brick complete all as specified and directed.
M&L for preparing of newly plastered ceiling surface and applying three coats of white wash complete all as specified and directed.
M&L for preparing of newly plastered wall surface and applying two coats of cement base paint over a coat of cement wash complete all as specified and directed.
M&L for Preparing new wall surface and applying two coats of OBD over a coat of primer and over 3 mm wall care putty complete all as specified and directed.
M&L for preparation of new surface and providing and applying and painting one coat of super coat acrylic exterior paint of approved make in required shade over a coat of primer and even finish over a coat of 3 mm thick putty existing on cleaned/primered surface by Mechanical spraying/painting machines) as per manufacturer,s specifacation etc. all complete including all tools,plants scaffolding, safety belts complete all as specified and directed
M&L for preparation of old existing surface by scrapping smoke soot, moulds and efflorescent salt and trading oil and greasy spots washing , rubbing down and stopping of distempered and painted by scrapping machine tool/electric hand grinder and cleaning the surface etc. and providing and applying and painting two coat of super coat acrylic exterior paint of approved make in required shade over a coat of primer and even finish over a coat of 1-2 mm thick putty existing on cleaned/primered surface by mechanical paint sprayers on exposed brick wall/ plain wall surface) as per manufacturer,s specifacation etc. all complete including all tools,plants scaffolding, safety belts complete all as specified and directed
M&L for removing, scrapping & cleaning the existing plastered unplastered painted/ old painted surface by scrapping machine tool/electric hand grinder or removal of paint from wall surface completely from exposed brick/ plasterd surfaces and providing and applying and painting two coat of oil emulsion distemper over a coat of coat 1-2 mm thick putty in required shade and even finish on over existing cleaned/primered surface by Mechanical paint sprayers on exposed brick wall/ plain wall, ceiling surface) as per manufacturer,s specifacation etc. including all tools,plants scaffolding, safety belts complete all as specified and directed
M&L for preparation of old wooden surface of any description not other wise described over 10 cm width or girth and applying two coat synthetic enamal paint over a coat of primer all as specified and directed
M&L for preparation of old decorated surface of ceiling and applying one coat of white wash complete all as specified and directed
M&L for preparation of old surface of steel and iron materials by brooming down or steel wire brushing ,scrapping downsmoke soot, moulds and efflorescent salt and trading oil and greasy spots of any description , not otherwise described over 10cm in width or girth and applying one coat of synthetic enamel paint, white or tinted by Mechanical paint sprayers complete all as specified and directed
M&L for Preparation of newly plaster surface of ceiling and applying two coats of white wash complete all as specified and directed.
Dismantling of floor hearth or wall tling including cement mortar bedding (but not backing), removing servicesable tiles to store and rubbish off the premises complete all as specified and directed.
M&L for 25 mm thick plain cement concrete type B0 1:2:4 (12.5mm graded aggregate) as in levelling course of floor and other similar works complete all as specified and directed.
M&L for non skid coloured ceramic floor tiles 7 to 8 mm thick (square/ rectangular) area of each tile exc 0.06 sqm but n exc 0.11 sqm,in floor ,wall etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the surface with 15mm thick screed bed or bedding layer in CM (1:6) complete all as specified and directed.
M&L for non skid joint free coloured Non-skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface with 15mm thick screed bed or bedding layer in CM (1:6) complete all as specified and directed.
M&L for glazed ceramic coloured wall tiles in vertical surface 450X300X7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick rendering in 1:4 CM complete all as specified.
M&L for joint free vitrified ceramic coloured tiles of 7 to 8mm thick area of each tile exceeding 0.18 and n.exc 0.36 Sqm in floor, shelves etc, set and jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 complete of item all as directed.
M&L for Vitrified Ceramic coloured tiles 10 mm thick (square/ rectangular) polished, area of each tiles exc 0.18 and n.exc 0.36sqm , in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:4 complete all as specified and directed.
M&L for Glazed ceramic coloured tiles 7 to 8mm thick area of tile exceeding 0.13 and n.exc 0.18 Sqm in skirting, dados, risers to steps, etc se and jointed in neat cement slurry, and pointed in coloured cement to match tiles over and including 10mm thick rendering or backing layer in cement mortar 1:4 complete all as specified and directed.
M&L for Endura floor tile size 300mmx300mm and 25 mm thick laying in floor jointed in neat cement slurry and pointed in white or coloured cement to match the surface with 15mm thick screed bed or bedding layer in CM (1:6) complete all as specified and directed.as per manufacturer instruction all as specified and directed.
Demolition of cement concrete in grond floor and paving not exc 15cm thickness (below or above ground level)
M&L for 75 mm thick cement concrete 1:3:6 type C2 using 20 mm graded stone aggregate in plinth protection finished even and fair including necessary form work and cutting of joints using extra cement etc complete all as specified.
M&L for preparation of old plastered or unplastered surface of wall including cornices etc. by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots and removal of vegetation and applying one coat of Cement Base Paint white or tinted of approved shade complete all as specified and directed.
S&F in repair 20 mm dia Stainless steel curtain rod of wall thickness not less than 1mm with both side decorative brakets and fixing brakets complete all as specified and specified.
Taking down chowkat with shutter (without taking off shutters from the frame) area not exc 1.5 Sqm each and removing from site complete all as specified and directed.
Taking down chowkat with shutter (without taking off shutters from the frame) exc 1.5 Sqm but not exc 4.0 Sqm each and removing from site complete all as specified and directed.
S&F in repair stainless steel acessories suitable for kitchen cabinets as under:-
(a) Stainless steel basket (plain) of size 15x20x4 inch made of 4mm th S.S.wire approved quality with suitable arrangement for fixing Telescope basket (channel) 18'/20' length two way extruded MS galvanised over rollers of approved make Make: Home care or equivalent approved
(b) Stainless steel thali basket of size 15x20x8 inch made of 4mm th S.S.wire approved quality with suitable arrangement for fixing Telescope basket (channel) 18'/20' length two way extruded MS galvanised over rollers of approved Make: Home care or equivalent approved
(c) Stainless steel Plate basket of size 15x20x6 inch made of 4mm th S.S.wire approved quality with suitable arrangement for fixing Telescope basket (channel) 18'/20' length two way extruded MS galvanised over rollers of approved complete all as specified and directed. Make: Home care or equivalent approved
(d) Stainless steel Partition basket of size 15x20x4 inch made of 4mm th S.S.wire approved quality with suitable arrangement for fixing Telescope basket (channel) 18'/20' length two way extruded MS galvanised over rollers of approved make complete all as specified and directed. Make: Home care or equivalent approved
(e) Stainless steel Cutlary wire box of size 15x20x4 inch made of 4mm th S.S.wire and bottom of S S perforated sheet approved quality with suitable arrangement for fixing Telescope basket (channel) 18'/20' length two way extruded MS galvanised over rollers of approved, Make: Home care or equivalent approved
(f) Stainless steel partiton bottol of size 20x6 inch made of 4mm th S.S.wire approved quality with suitable arrangement for fixing Telescope basket (channel) 18'/20' length two way extruded MS galvanised over rollers of approved make complete all as specified and directed. Make: Home care or equivalent approved
(g) Stainless steel basket (plain) of size 21x26 inch made of 4mm th S.S.wire approved quality with suitable arrangement for fixing Telescope basket (channel) 18'/20' length two way extruded MS galvanised over rollers of approved make complete all as specified and directed. Make: Home care or equivalent approved
S&F Telescope basket (channel) 18/20inch length extruded MS galvanised over rollers of approved make complete all as specified and directed.
S&F for magnetic catches with steel body ‘H’ type, fixed to shutter complete all as specified and directed.
S&F for 75 mm dia brass handle fancy type polished bright finish ccomplete all as specified and directed.
S&F for 100 mm dia brass handle fancy type polished bright finish complete all as specified and directed.
S&F for Continuous (Piano) hinges, mild steel , bright finish, 30 mm width of flaps (when open) complete all as specified and directed.
Supply and fix/fabrication in repair kitchen cabinet & wardrobe/ cupboard made out of 16 to 18 mm thick PVC board plain sheet complete.Make : Rajshree or equivalent all as specified and approved by Accepting Officer. Note: Kitchen accessories ie baskets, cutlery baskets, fittings and fixture will be measured and paid separately as supply only Note: Kitchen accessories ie baskets, cutlery baskets, fittings and fixture will be measured and paid separately as supply only
S&F for Anodised aluminium frame powder coated for doors, windows, ventilators, partition, posts to sustain curtain rail etc with one or more rebates including joining cleat for fixing etc complete all as specified and directed.
S&F for Anodised aluminium powder coated window and ventilator shuttrs, side hung type, without sash,aluminium sectioin weighing 0.55 kg/m including necessary joinin cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long(1no), hinges type B-21 100mm long( 2no) suitable handle (1no) complete all as specified and directed.
S&F for anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineerin-charge.
S&F for stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.4mm fixed with screw are galvanised wire staple complete all as specified and directed.
M&L for 4mm thick sheet glass ordinary quality and glazing with oil putty in square n-exc 0.5 sqm in each pane complete all as specified & directed.
Dismantling wall and ceiling boards or insulation boards, any thickness, any description, including cover fillets complete all as specified and directed.
S&F 4mm thick E-boards tiles (Make: Everest) false ceiling with powder coated GI snap grid frame work (Make: Armstrong/Saint Gobain or equivalent as approved) including cutting holes in brick wall built in cement mortar & making good in cement concrete 1:2:4 type BO/Cement mortar 1:3 complete all as specified and directed including all necessary drilling and necessary arrangement to fix electrical items as under:- (a) 25x25x1.6mm thick GI angle powder coated duly plugged @ 600mm centre to centre along perimeter of wall. (b) 25x25x1.5mm thick GI tee powder coated as main and cross runners suspended with 1.6mm dia GI wire suspenders with adjustable clamps and dash free fastners plugging in RCC slab placed @ 600mm centre to centre from perimeter of wall. (c) Fixing of 4mm thick E-boards tiles of size 595x595mm of approved texure and finished complete with two coats of oil emulsion distemper on ceiling. NOTE: The complete ceiling work shall be done as per manufactures instruction and as directed.
S&F for solid PVC wall lining consisting of 5mm thick single side prelam PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications complete all as specified and directed.
S&F in repair 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing with solvent on to wall to make PVC frame as per specifications complete all as specified and directed.
Demolition of cement concrete (unreinforced) in ground floors and pavings not exc. 15 cm thickness (below or above ground level) complete all as specified and directed.
M&L for PCC 1:4:8 type D-2, using (40 mm graded crushed stone agg), 75 mm thick as in sub base of flooring complete all as specified and directed.
M&L for 100mm thick cement concrete 1:2:4 type B-2 using 40mm graded crushed stone aggregate as in flooring complete all as specified and directed.
Demolition of Stone slabs and tiles laid dry and dry or pointed of any description or thickness infloors, aprons etc complete all as specified and directed.
M&L for 80mm thick M-40 grade factory made rubber moulded vaibratory cement concrete coloured interlocking paver block any shape and size conforming to IS 15658-2006 with grey cement and pigment all as specified and directed.
M&L for chequered cement concrete coloured tile 30cm X 30cm X 25 mm thick with grey cement and pigment set jointed and pointed in neat cement siurry over screed bed or bedding layer 15 mm thick in CM (1:6) in floor all as specified including dismantling of tiles
M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.
Schedule of Credit (MINUS) Rs. 20,750.00 B/F from Serial Page No. [Note : Details of items for schedule of credit is given on Srl Page No. ] This amount shall be automatically deducted to arrive at tendered sum
aiecro engineering works and consultants (BID ID -3414493)
ROHIT CONSTRUCTION (BID ID -3414128)
M/S VIVEK DUBEY (BID ID -3414282)
DK Builders (BID ID -3413972)
creative construction co. (BID ID -3411844)
Comnet technologies (BID ID -3414538)
M/S AVANI TRADERS (BID ID -3412307)
M/s Meena Engineering Enterprises (BID ID -3410928)
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .