Maintenance of Motors and associated works in Anupuram Township during the year 2026-2027.

Amount

Maintenance of Motor Control centres/Distribution Centres, LT panels/TPN switch Fuse Units (Refer Sec VI (MNC), Clause No.17.2).

Cubicle switch boards having number of vertical sections up to 3

Cubicle switch boards having number of vertical sections more than 3

Combination Switch fuse Units from 250A to 400A / Motor starters

Maintenance of Control Panel of Sewage Lift Pump / Siren Control Panel/ Submersible Pump Panel

Preventive maintenance of 1Ph / 3Ph LT Motors.( 1HP to 20 HP motor)

Preventive maintenance of 1Ph / 3Ph LT Motors.( 22.5 HP to 100 HP motor)

Preventive maintenance of Sewage liquid level probes Junction boxes

Cleaning of Motor Control Centres / Distribution Centres, LT Panels / TPN Switch Fuse Units / Squirrel Cage Induction Motors / Motor Starters as per the Specification and as directed by Engineer-in-charge

MCC Panel & Panel room

Control Panel & Panel room

Motor Starters units fixed on wall

Cleaning of Squirrel Cage Induction Motors

Motor Junction boxes ( Monobloc Motors)

Motor Junction boxes ( Submersible Motors)

Junction boxes ( Motorised operated Valves)

Cleaning of Sewage liquid level probes

Attending to break down calls for following types of Motors as per the scope of work . (Refer Sec VI (MNC), Clause No.15).

Single Phase Motors up to 2 HP

3 Phase Motors from 3 HP to 12.5 HP

3 Phase Motors from 15 HP to 35 HP

3 Phase Motors from 40 HP to 75 HP

Overhauling, Painting and test running of the following single/three phase motors as per the scope of work. (Refer Sec VI (MNC), Clause No.14.1).

Fractional HP Motors upto 0.5 HP

Above 0.5 HP to 2.0 HP Motor

3.0 HP / 5.0 HP Motor

7.5 HP / 10.0 HP Motor

12.5 HP / 15.0 HP Motor

20.0 HP / 25.0 HP Motor

30.0 HP/35.0/40.0 HP Motor

50.0/60.0 HP/75.0 HP Motor

More than 75.0 HP up to 100.0 H.P Motor

Rewinding of the following 415 Volts, LT Motors as per the scope of work (Refer Sec VI (MNC), Clause No.11.2)

Fractional HP Motor upto 0.5HP

Above 0.5 HP and up to 2.0 HP Motor

3.0 HP Motor

5.0 HP Motor

7.5 HP Motor

10.0 HP Motor

12.5 H.P. Motor

15.0 HP Motor

20.0 HP Motor

22.5 HP / 25.0 HP Motor

Complete Overhauling, Painting, Rewinding, Machining, Replacement of Bush Bearings, Thrust Bearings, Oil Seals, Dismantling & Assembling, Testing and Commissioning of following 415 Volts Submersible Motors as per the Specification and as directed by Engineer-in-charge

1.0 HP Submersible Motor

2.0 HP Submersible Motor

5.0 HP Submersible Motor

7.5 HP Submersible Motor

10.0 HP Submersible Motor

25.0 HP Submersible Motor

45.0 HP Submersible Motor

Synthetic enamel painting of the Fractional HP to 25 HP Induction Motor as per the detailed Specification and as directed by the Engineer - in - Charge

Fractional HP to 2 HP Motor

3 HP to 7.5 HP Motor

10 HP to 25 HP Motor

Supply and painting One coat on metallic surfaces of electrical equipment and other required surface at all levels with primer and following paint (Asian or approved brand, colour and manufacturer) to give an even shade including preparation of the surfaces, scaffolding complete all as per specifications and as directed by the Engineer-in-Charge. (Refer Sec VI (MNC), Clause No.3).

Synthetic enamel Paint

Machining and building up of damaged / worn-out Motor Shaft and Bearing housing in end cover as per the detailed specification.

From 3.0 to 10.0 HP Motor

From 12.5 to 25.0 HP Motor

Supply, replacement and testing of following HRC fuse links and Indication lamps as per the detailed specification and as directed by Engineer-in-charge.

HRC Fuse Link 16 A to 32 A Cylindrical Type HF Size 14 x 51 or Equivalent

HRC Fuse Link 63 A to 125 A DIN Type HN Size 00 or Equivalent

ON Push button with NO Element ( GREEN)

OFF Push button with NC Element ( RED)

10-25 mfd, 240/440V PVC polypropylene industrial type Capacitor for single phase motor

125A ,1000V Connector ( CSTSN6U)

Supply and replacement of Push button and panel LED indication lamp Dia '22.5'mm, various colours suitable for various operating voltages from 24 V up to 240 V AC/DC. (Refer sec VI (MNC), Clause No. 12)

Colour : Red/ Yellow/ Green/ Amber

Colour : White

Colour: Blue

Supply and replacement of the following contactors and accessories (Refer Sec VI (MNC), Clause No. 4) .

Control Contactor, AC-15 Rating MX0 - 22E ( 2 NO + 2 NC )

Power Contactors, AC3 Rating MNX 3Pole 18A

Power Contactors, AC3 Rating MNX 3Pole 32A

Power Contactors, AC3 Rating MNX 3Pole 40A

3pole Power Contactor (AC3) type ML1.5, 25A

3pole Power Contactor (AC3) type ML2, 32A

Bimetal over load relay (9-14)A for direct mounting on ML type contactor.

Bimetal over load relay (13-21)A for direct mounting on ML type contactor.

Bimetal over load relay (6-10)A for direct mounting on MNX type contactor.

Bimetal over load relay (9-15)A for direct mounting on MNX type contactor.

Bimetal over load relay (14-23)A for direct mounting on MNX type contactor.

Bimetal over load relay (20-33)A for direct mounting on MNX type contactor.

Type: MPR 300 or equivalent of range (32-88) A standrad range or equivalent.

Auxiliary Contact (2NC + 2 NO) for 3 phase, 415 Volt Motor Starter

Supply and replacement of Electronic Timer suitable for Automatic Star Delta Starter with Timing Range: 3 sec to 120 sec, Voltage: 240 - 415 V AC with 1 NO (Star) + 1 NO (Delta) as per the detailed specification and as directed by Engineer-in-charge

Supply and Installation of LT panel accessories as per the detailed specification

Lock type panel knob

Screw type panel knob

Supply, cleaning the floor, proper pasting and installation of following insulating mat as per specification. (Refer Sec VI, Clause No.25).

2.0 mm thickness, Max useable voltage 3.3kV, AC Proof voltage 10kV for 3 minutes, AC dielectric strength 30kV RMS Insulating Mat confirming to IS:15652

Supply and replacement of following Motor Bearings during overhauling (Refer Sec VI (MNC), Clause No.14

Bearing Model No:6203 2Z

Bearing Model No:6204 2Z

Bearing Model No:6205 2Z

Bearing Model No:6206 2Z

Bearing Model No:6208 2Z

Bearing Model No:6306 2Z

Bearing Model No:6308 2Z

Bearing Model No:6311 2Z

Bearing Model No:6312 2Z

Supply, Replacement / Installation, testing and commissioning of following 3 Core Flat Type Cable as per the detailed specification and as directed by Engineer-in-charge.

3 Core 2.5 Sqmm Cu.Cable

3 Core 6 Sqmm Cu.Cable

3 Core 10 Sqmm Cu.Cable

3 Core 16 Sqmm Cu.Cable

Supply and replacement of junction box as per the detailed specification and as directed by Engineer-in-charge

Three Phase Submersible Junction Box with Connectors

250 x 250 x 120 mm MS Junction Boxes

Supply, installation, testing and commissioning of the following Push Button Stations with FRP Junction Boxes (IP 65) including all required accessories as per the detailed pecification.

Supply and replacement of Switch Disconnector fuse ,125A, 690V, AC-23A with Three Nos of 125A HRC Fuse as per the detailed specification and as directed by Engineer-in-charge

Connection of 3 phase Pump Motors at various locations as per the Specification and as directed by Engineer-in-charge

Disconnection of 3 phase Pump Motors at various locations as per the Specification and as directed by Engineer-in-charge

Maintenance of Earth Pits including supply of Sodium Bentonite, and measurement of Earth Pit Resistance as per the specification. (Refer Sec VI (MNC), Clause No.2).

Maintenance of Earth Pits and measurement of Earth Pit Resistance as per the specification. (Refer Sec VI (MNC), Clause No.2).

Repair of Earth pit

Repair of earth pit chamber after removing and disposing old/damaged chambers supply and installing new chamber as per drawing No. IGC/ESD/5060/1008/1. (Refer Sec VI (mnc) clause no.2)

Supply, installation and testing of GI Pipe Earth Electrode as per IS: 3043 including RCC Chamber and RCC cover slab as per Drawing Nos. IGC/ESD/5060/1007/1 & IGC/ESD/5060/1008/1 are enclosed. (50 Kg. Each Bentonite & Charcoal shall be provided for each earth pit). (Refer Sec VI, Clause No.12.4).

Supply, fabrication and installation of the following size of Hot dip Galvanised GI Flats including excavation and refilling as per the detailed specification. No cutting or drilling permitted after galvanisation.Refer Sec VI, Clause No.12.9).

25 x 6 mm GI flat

Supply, fabrication and installation of the following size of Hot dip Galvanised GI Flats in Built in trenches on walls, poles, RCC Concrete and through embedded pipes as per the detailed specification. No cutting or drilling permitted after galvanisation. (Refer Sec VI, Clause No.12.9).

25 x 6 mm GI flat

Loading, Transportation, Unloading at site, Laying, Testing and Commissioning of one number PVC/HRPVC/XLPE insulated and PVC sheathed Stranded Aluminium/copper conductor power cable of 1.1 KV grade of following sizes direct in ground including excavation, sand/m-sand cushioning, protective covering with chamber burnt/cement bricks on sides & top, refilling the trench and providing RCC route indicator etc as required (Note: Cable will be issued free of cost by the department).(Refer Sec VI, Clause No.3)

3/3.5/4 Core x upto 25 Sqmm

3/3.5/4 Core x above 25 to 3/3.5/4 Core X up to 120 sqmm

Loading, Transportation, Unloading at site, installation, Testing and Commissioning of 1100 Volts Grade PVC/HRPVC/XLPE insulated, Stranded Aluminium/copper conductor cables of following sizes in built-in trenches, on walls, poles and through embedded pipes including supply of GI spacer, clamps etc and as per the detailed specification (Note: Cable will be issued free of cost by the department).(Refer Sec VI, Clause No.3)

3/3.5/4core x Upto 25 sqmm

3/3.5/4Core x above 25 & up to 120 sqmm

Retrieval of the existing one number PVC/HRPVC/XLPE insulated and PVC sheathed power cable of 1.1 KV grade of following sizes laid direct in ground including Removal of end termination, excavation of trenches, retrieving of bricks and back filling as per the detailed specification.(Refer Sec VI, Clause No.5)

3/3.5/4 Core Upto 25 Sqmm

3/3.5/4 Core Above 25sqmm & upto120 sqmm

Retrieval of the already laid one number 1100 Volts Grade XLPE/HRPVC insulated, Stranded Aluminium conductor cables of following sizes in built-in trenches, on walls, poles and from embedded pipes including removal of end termination GI spacer, clamps etc as per the detailed specification. (Refer Sec VI, Clause No.5)

3/3.5/4 Core Upto 25 Sqmm

3/3.5/4 Core Above 25sqmm & upto120 sqmm

Retrieval of the already laid one number PVC insulated & Sheathed 1.1kV grade copper Conductor, armoured control Cables of following sizes laid direct in ground including retrieval of end termination, excavation of trenches, retrieving of bricks and back filling of soil etc as per the detailed specification .(Refer Sec VI, Clause No.5)

Upto 14 C x 2.5 Sqmm

End Termination of the following sizes of Aluminium Conductor PVC Insulated and sheathed armoured UG Cable using Single Compression, Heavy Duty, Gland connecting the cable to the equipment such as Switches/Panel Boards etc. using Comet or equivalent make Aluminium crimping lugs as directed by Engineer-in-Charge. The rate shall include the cost of supply of Cable Gland and Lugs. The Contractor shall arrange for making holes wherever necessary for fixing cable gland. (Refer Sec VI, Clause No.10.1).

4 Core x10 Sqmm

4 Core x 16 Sqmm

3.5/4 C x 35 sq.mm

3.5/4C x 50/70 sq.mm

Excavation in hard soil including refilling with excavated earth and disposing surplus earth at places as directed with in a lead of 10 Mtrs. and initial lift upto 1.5 Mtrs. including neat banking as per detailed specification. (Refer Sec VI, Clause No.2)

MSE CONTRACTOR (BID ID -3302563)

A.P.B ELECTRICALS (BID ID -3300548)

Bidder Name

SAS ENTERPRISES

MSE CONTRACTOR

A.P.B ELECTRICALS