Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹33.1 LAccepted-AOC 21 JHAMRI 151 JHAMRI JHAMRI ROHTAK HARYANA 124142 UDYAM HR 07 0030314 | JHAJJAR | HARYANA | 124142 | L1 | Accepted-AOC Accepted being L1 | |
| 2 | L2₹36.0 L+₹1.9 L (5.59%)Rejected-AOC | L2 | Rejected-AOC Rejected due to not being L1 | |
| 3 | L3₹37.7 L+₹3.6 L (10.5%)Rejected-AOC | L3 | Rejected-AOC Rejected due to not being L1 | |
| 4 | L4₹38.4 L+₹4.3 L (12.6%)Rejected-AOC | L4 | Rejected-AOC Rejected due to not being L1 | |
| 5 | L5₹39.4 L+₹5.4 L (15.8%)Rejected-AOC | L5 | Rejected-AOC Rejected due to not being L1 |
Tender Value
Refer Docs
EMD Value
₹80,320
Closing Date
18 Jan 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE NORTH UDHAMPUR
Garrison Engineer (North) Udhampur (J and K)
GE/U(N)-63/2023-24 ADDN ALTN TO MI ROOM BLDG NO P-49 AT JNE COMPLEX UNDER GE (NORTH) UDHAMPUR
2023_MES_633676_1
GE/U(N)-63/ 2023-24
Open Tender
Civil Works
Item Rate
180 days
GE NORTH UDHAMPUR
Please refer tender documents
7 documents required · 7 mandatory
₹500
Yes
GE NORTH UDHAMPUR
₹80,320
Yes
7 Feb 2024
21 Dec 2023
20 Jan 2024
21 Dec 2023
18 Jan 2024
4 Jan 2024
Amount
Taking down chowkhats or frames with shutters (without taking off shutters from the frame) not exc 1.5 square metre each complete all as specified and as directed by Engr-in-Charge.
Taking down chowkhats or frame exc 1.5 sq.m but n.exc 4 sq.m with shutter (without taking off shutters from the frame) and removing from site complete all as specified and as directed by Engr-in-Charge.
S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, as per specification & drawing complete all as specified and as directed by Engr-in-Charge.
S&F in the frame factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails M.S. frames shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and as gap insert for top rail on either side and as gap insert for top rail and bottom rail; paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading, and joined together with solvent cement, complete all as specified and as directed by Engr-in-Charge.
S&F Pressed steel frames of size 125 X 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, (thickness of sheet shall be 1.25mm) and making good the wall with plaster in CM 1:6 complete all as specified and as directed by Engr-in-Charge.
S&F for pressed steel frames of size 105 X 60 mm for doors with one or more rebates including necessary fixing lugs hinges, locks strike plate etc, (thickness of sheet shall be 1.25mm) and making good the wall with plaster in CM 1:6 complete all as specified and as directed by Engr-in-Charge.
M&L PCC 1:3:6 type C-1 using 20 mm graded stone aggregate for filling in back of pressed steel door frame/chowkhat and fixing of bed block of hold fast etc. complete all as specified and directed.
S&F Factory Made 2nd class hard wood 35mm thick flush door shutters, solid core with particle board exterior grade as per IS-22002 of 1983 (Part-I). Flush door shutters shall be internally lipped as per clause 8.21 of SSR-1919 Part-I. flush shutter solid panel construction with both commercial type plywood face on both sides complete all as specified and directed.
S&F factory made solid PVC wire gauged shutter 30mm thick width & including Stainless steel wire cloth shall be of 0.36 mm nominal dia SS wire with average width of aperture as 1.40 mm for mosquito proofing. i.e panel will be of wire gauge in lieu of sheet panel. The wire gauge shall be wrapped on an additional square 8 mm MS solid tube and this tube shall be welded to MS tube. The wire gauge shall be stretched to tighten firmly, complete all as specified and as directed by Engr-in-Charge.
S&F Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed etc, as specified and as directed by Engr-in-Charge.
S&F 150mm Helical Double action door spring, mild steel with steel wire spring, stove enameled, black complete all as specified and as directed.
S&F butt hinges 75mm medium weight cold rolled mild steel and fixed as specified and as directed.
S&F 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed by Engr-in-Charge.
S&F 250 mm long aluminuim alloy, anodised , sliding bolt with hasp staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed by Engr-in-Charge.
S&F 200mm long Aluminium, anodised, barrel tower bolts of extruded section and fixed, complete all as specified and as directed by Engr-in-Charge.
S&F 150 mm long Aluminium, anodised, barrel tower bolts of extruded section and fixed, complete all as specified and as directed by Engr-in-Charge.
S&F 100 mm long aluminium handles cast type anodised all complete all as specified and as directed by Engr-in-Charge.
S&F 150mm long aluminium handles cast type anodised all complete all as specified and as directed by Engr-in-Charge.
S&F floor door stopper of alumium body and tongue anodised with land drawn steel spring overall length of cover plate 150mm fixed with screw, complete all as specified and as directed.
S & F Powder coated (not less than 50 micron) aluminium frames for door/ windows/ ventilators of approved design with one or more rebated including jointing cleats with all fixing arrangement in repair, complete all as specified and directed by Engr-in-Charge.
S & F powder coated (of approved colour) aluminium (minimum thickness of powder coated 50 micron) as in shutter of windows, ventilators openable/ louvers fixed/sliding type without sash bars, aluminium section not less than 0.55 kg/m including nessery jointing, cleats, glazing clips, rubber, neoprene packing, aluminium snap beding, screws , rolling for smooth moving & locking arrangement, etc fixed to wall including, preparation of disturbed portion both side (internal & external surfaces of wall) match with existing surface treatment and all sides of aluminium frame shall be sealed with silicon sealent (inner/outer face) complete all as specified as directed by Engr-In-Charge.
M&L powder coated Anodised aluminium door shutters,aluminium section weighing 0.55 kg/m including necessary jointing cleats,glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges,anodised aluminum snap beading screws etc. complete all as specified as directed by Engr-In-Charge.
S &F Aluminium deco grill of 5 to 6mm dia size of mesh not exe 7.5cm in either direction includingAnodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainlesssteel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixingapproved anodised aluminium standard section around the opening, complete all as specified as directed by Engr-In-Charge.
S&F Aluminium die cast Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete as per specified as directed
M&L Sheet glass 4mm thick ordinary quality and glazing with beading/oil putty in square n/exc 0.50 Sqm each pane fixed to steel, metal frames,complete all as specified and as directed by Engr-in-Charge.
All as per item 25 above but pin head type, figured glass as specified and as directed by Engr-in-Charge.
Cutting holes in brick walls in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required exc half brick but n.exc one brick complete all as specified and as directed.
M&L for preparation of new wooden painted surface of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and as directed by Engr-in-Charge.
Demolition of cement concrete (un reinforced) as in ground floor and paving area of any type and any thickness, complete all as specified and as directed by Engr-in-Charge.
M&L 25mm thick PCC 1:2:4 type B0 (using 12.5mm graded stone aggregate) as in floor sub base of tiles complete all as specified and as directed by Engr-in-Charge.
M&L for Rendering 10 mm thick cement plaster in CM 1:4 on concrete surface of roof slab and parapets mixed with WPC @ 3% by weight of cement as in roof padding finised even and smooth without useing extra cement. Note WPC will mesure and paid seperately .
M & L for roughing surfaces of old concrete surfaces by picking up, sweeping, cleaning and washing down with water to remove dust etc for local depressions RCC surface and brushing neat cement slurry with 3.0 Kg of cement per Sqm complete all as specified and directedby Engr-in-Charge.
M & L for apply bituminous primer conforming to IS -3384 @ 0.40 Kgs/ Sqm on prepared surface on sunny day. After the primed surface has dried and apply a coat of hot blown 85/25 penetration grade blown bitumen, conforming to IS -702@ 1.20kg/ Sqm on the surfaces. Provide APP (Atactiic Polypropylene) modified polymeric five layered membrane with central core of 100 micron high molecular high density firm. Minimum weight of membrance will be 3 kg/Sqm. APP membrance will be laid across the slope from lowest line sloping roof towards ridge with minimum end lap of 150 mm & side lap of 75mm bonded with hot blown bitumen. Over the APP membrance apply semi hot blown 85/25 penetration grade bitumen @ 1.20kg/ Sqm and blinded with fine sand in dry condition @ 0.50 kg/Sqm dusted over the bitumen coat. WITH two coates of ALUMINIUM PAINT Note :- The laying of the membrane shall be got done by authorized applicator of the membrane manufacturer. No payment shall be made without documentry evidence.
Dismantling floors hearth and tiling or wall tiling including cement mortor bedding (but not backing) removing rubbish of Premises of any description or thickness in floor/dado, apron, etc laid bedded and pointed in any mortar,complete all as specified and as directed by Engr-in-Charge.
M&L for vitrified ceramic tiles light shade 8 to 10mm thick (square/rectangular) polished, area of each tiles not exc 0.36sqm in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick screed bed in CM (1:4) for laying floor finishes complete all as specified and as directed by Engr-in-Charge.
M&L for vitrified ceramic tiles 8 to10mm thick light shade (square/rectangular) polished, area of each tiles not exc 0.36sqm in vertical surfaces such as skirting/dados, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick rendering in CM (1:3) on brick or concrete surfaces of finished rough to receive wall tiles complete all as specified and as directed by Engr-in-Charge.
M&L Non skid ceramic cololured tiles 7 to 8 mm thick (square/rectangular) area of each tile exc 0.11 Sqm but n.exc 0.18 Sqm. in floors etc set and jointed in neat cement slurry and pointed in white or coloured to match over 15mm thick screed bed or bedding layer with cement mortar 1:4 for laying floor finished complete all as specified and as directed by Engr-in-Charge.
M&L Glazed ceramic coloured digital tiles in vertical surfaces of wall of size 450mm x 300mm x 7mm or 350mm x 250mm x 7mm thick as approved pattern approved by GE, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick rendering in Cement mortar 1:4 as in skirting, dado, etc, complete all as specified and as directed by Engr-in-Charge.
Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) .
M&L PCC (1:3:6) type C-2 using 40mm graded crushed stone aggregate 75mm thick as in plinth protection laid in bays and filled with bitumen mastic filling.
M&L providing cement concrete in roof kerb or mud stops, rounded or chamfered on edges complete all as specified and directed.
Taking down cement plaster of any description on brick or stone walls etc including racking out joints hacking for key scrubbing down with water etc complete all as specified and directed.
M&L rendering 15mm thick on external surfaces of wall in two layers (first layer 10mm thick and second layer 5mm thick) on fair faces of brick work or concrete surfaces, Cement plaster as in CM 1:4 using WPC finishing even & fair w/o using extra cement complete all as specified and directed Not WPC shall be measured and paid for seperately.
M&L rendering 10 mm thick plaster in cement mortar 1:6 on fair face of brick work or concrete surfaces, finished even and smooth w/o using extra cement, complete all as specified and as directed.
M&L rendering 5 mm thick plaster in CM 1:3 on ceiling surface finished even and smooth without using extra cement complete all as specified and directed.
M & L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance asper IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade(Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including primingcoat of exterior primer applied @ 0.90 litre/ 10sqm over new surfaces after applying 1 to 2mm (in two coats) thick wall care putty coat prepared and rubed with emery paper complete all as specified and as directed by Engr-in-Charge.
Preparation of new plastered surfaces of wall by applying 1 to 2 mm thick wall care putty after preparing of surface with emery paper and applying two coat of OBD on new plasterd surface over a coat of primer of any description complete all as specified and directed.
Preparation of new plastered surfaces of ceiling applying two coat of white wash complete all as specified and directed.
M & L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance asper IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade(Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including primingcoat of exterior primer applied @ 0.90 litre/ 10sqm over old surfaces, complete all as specified and as directed by Engr-in-Charge.
M&L complete removal of existing treatment, preparation of surface and applying two coats of oil bound destemper over one coat of 1mm thick wall care putty complete all as specified and as directed.
M&L for preparation and brooming down of old decorated plastered or unplastered surfaces of walls including cornice etc and applying one coat of white wash on celing complete all as specified and directed.
S & F in repair 15 mm bore fancy type chromium plated stop valve of cast copper alloy screwed down high pressure with crutch butter fly handle screwed both ends for iron pipe or for unions and fixed.
S&F in repair brass chromium plated shower rose 125 mm of size with arm and with or without swivel joints to steel pipe or union.
S & F in repairs 15 mm dia bore fancy type chromium plated concealed stop valves of cast copper alloy with long shank & cup etc.
S&F in repair brass chromium plated tubular towel rail, 20 mm dia, D type, 60 cm long between flanges.
S&F Soap dish with stain less steel of size 160x160x90mm fixed to plugs on wall with chromium plated brass screws .
S&F in repair 15 mm dia bore fancy type chromium plated bib taps cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe, or for brass ferrule.
S&F in repair sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm incl 32mm waste fittings brass chromium plated etc .
M&L Galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18 mm fixing with wooden/steel beads, complete all as specified and as directed.
Dismantling of CGI/AC/ any others sheet of any description incl ridges etc all as specified & directed by Engr-In-Charge.
S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified & directed by Engr-in-Charge.
S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified & directed by Engr-in-Charge.
S&F Brass CP mixer 15mm bore for mixing hot & cold water screwed down for iron pipe for Wash Hand Basin with wall flange .
Dismantling water tanks of 1000 ltrs and removing to store, complete all as specified and as directed.
S&F rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) of 1000 litres capacity (Tripple layer) any colour including water tank cover (internaly/interlocking arrangment for water tank cover), hoisted and fixed in position including tank nipple inlet & outlet and connecting up pipes complete all as specified and directed.(fixed in repair)
Taking up or down GI tubing 15 mm bore pipe including removal to store.
Taking up or down GI tubing 20 mm bore pipe including removal to store.
M&L for 25mm dia Stainless Steel curtain rod fixed in repair with brackets and knobs at both ends as per site requirement including taking down old existing PVC conduit pipes with accessories . Note : The cost of brackets and knobs is deemed to be including in the quoted rate. Nothing extra shall be paid on this account.
S&F GI tubing 15 mm bore medium grade galvanised with all fitting and fixed to walls & ceilings or laid in floors
S&F GI tubing 20 mm bore medium grade galvanised with all fitting and fixed to walls & ceilings or laid in floors.
Taking down rain water pipe and eaves gutters (any size and pattern) including all fittings heads shoes bends swan necks etc including cleaning or refixing or removal to store(measured overall as fixed along the centre line over fittings and accessories)
S & F in repairs vitreous China squatting pan of Orissa pattern of approved make of size 580 mm X 440mm white with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe incl cement concrete bedding and connection to antisyphonage pipe etc including making good to floor.
S&F vitreous china wash down water closet (pedestal pattern) snow white suitable for p or s trap complete, including connection to drain pipe and to flushing pipe antisyphonage pipe etc, fixed in repair.
Supply and fixing in repairs PVC low level cistern of 10 ltrs capacity with top push button inclusive of brackets and PVC bend long type and connecting to flush pipe of any size and pattern with inlet ball valve float and handle complete of approved make .
Supply only water proofing compound
S&F glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated brackets, guard and railing 60cm long fixed in repair complete all as specified and as directed.
Taking down carefully alu./copper point wiring ,light fan socket, or power complete with (fittings such as old rusted steel conduit switches ceiling rose pendants, regulators, socket etc to be measured separately ) removing material to store for disposal by credit and making good to disturbed surfaces of walls floors etc and all as specified.
Dismantling and taking down fluorescent tube light single/double of any wattage or size street light fittings for repair or replacement of burnt/worn out accessories or carrying to MES store for reuse or takeing in schedule of credit (Accessories or components to be provided free for replacement by department)
Taking down unserviceable / serviciable MCB DB's/AC's box to deposit in store for keeping in safe custody for reuse or takeing in schedule of credit of any size/rating complete all as specified and directed by Engr-in-charge.
M&L for point wring for one light/ceiling fan/bell controlled by one switch with 1.5 sqmm (nominal area) PVC insulated and PVC unsheathed multi stranded copper conductor cable FRLS in and including concealed PVC conduit 20 mm dia medium duty ISI marked, including sutiable new annealed sunken boxes,modular frame and cover plate for fixing of modular switches as per required point in that board, flush to surface for one light point/ fan point/ Bell point controlled by one switch including PVC insulated unsheathed 1.5 sqmm copper conductor cable FRLS connected to common earth dooly complete including cutting,chasing the surface and then making good the same in CM 1:3 complete all as specified and directed. (a) All as per item No 81 One light Point controlled by one,one way switch.
(b) All as per item No 81 One fan/exhaust fan/Air ciculator /bell point controlled by one way switch.
(c) All as per item No 81 above but 3 Pin 5 Amp modular Socket on the same board, complete all as specified.
(d) All as per item No 81 above but 3 Pin 5 Amp modular Socket on independent board complete all as specified and directed.
All as per item No 81 above but M & L for point wiring with two runs of FRLS PVC insulated unsheathed, 1100 V grade cable multi stranded copper conductor of size 2.5 sqmm drawn through in and including PVC conduit size not less than 25mm concecled in wall / surface including provn of pressed steel terminal box of suitable size with 3mm thick plastic laminated sheet cover for mounting switch, socket and regulator along with earth wire of PVC insulated, unseathed, 1100 V grade cable multi stranded copper conductor of size 2.5 sqmm and for one 6 pin modular socket outlet two in one 16/6 amps on an indeendent board including colour coding of cable shall be Phase- Red, Neutral- Black and Earth- Green and making good, disturb surface as it is complete all as specified and directed by for the following.
S&F modular socket 6 amps 5 pin flush type, 240 volts. with polycarbonate body. complete all as specified and directed.
S&F modular socket out let, 6 pin 6 and 16 amps multi purpose 2 in 1 flush type, 230 volts with polycarbonate body.complete all as specified and directed.
S&F modular switch single pole one way 6 amps 240 volts with polycarbonate body complete all as specified and directed..
M&L for modular switch single pole one way 16 amps 240 volts with polycarbonate body complete all as specified and directed..
Supply and fixing modular electronic fan regulator, step type, two module 120 watt 230 volt and making all necessary connections complete all as specified and directed.
S&Fof decorative ultra slim linear LED lighting fixture 18/20 watt LED complete making all connection using 1.5 sqmm copper conductor multistranded PVC insulated twin core flexible cable from ceiling rose to fitting drawn through in PVC flexible conduit of same colour to match with fittings/wall surface complete all as per directed by Engr-in-charge. Make C & G OR equivalent model of wipro and havells.
S&Fof decorative ultra slim linear LED lighting fixture 10/12 watt LED complete making all connection using 1.5 sqmm copper conductor multistranded PVC insulated 2 core flexible cable from ceiling rose to fitting by using extra length flexible cable 2 core other than provided by manufacture complete all as per directed by Engr-in-charge.Make : Make C&G OR equivalent model of wipro and havells.
S&F of decorative ultra slim linear LED lighting fixture 5/6 watt LED complete making all connection using 1.5 sqmm copper conductor multistranded PVC insulated 2 core flexible cable from ceiling rose to fitting drawn through in PVC flexible conduit complete all as per directed by Engr-in-charge Make C&G OR equivalent model of wipro and havells.
S&F new generation energy saving LED bulk head 9/10 Watt with opal diffuser suitable for 600 LUMEN complete. Make C&G OR equivalent model of wipro and havells.
M&L for conceald sub main wiring with two runs of 4 Sqmm ( 2x4 sqmm ) 1100 volts grade single core FR PVC insulated unsheathed multistranded copper conductor confirming to IS-694 drawn through and including non-metalic PVC rigid conduit 25 mm dia ISI marked with all conduit accessories mounting on suface of walls /roofs / ceiling including cutting chasing and with one run of 4 Sqmm (1x4sqmm ) single core FR PVC insulated unsheathed copper conductor cable as earth wire complete all as specified and directed.
S&F LED street light fitting 35 watt 230 V AC outdoor type with high pressure die cast aluminium hosing and heat resistant compete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optic complete with IP 65/66protection completed. All as specified and directed
S & F sheet metal VTPN DBs - 160 Amp bouble door 04 way (optimum F2+12) with metal door 415 volts grade IP 43 Protection Grade fixed flush to wall complete including connections should be provide with necessary reducer lugs all as specified and directed by Engr-in-charge.Make Legrand Cat part No : 5077 50 or equivalent to Shnieder
S&F MCCB adjustable type, 160 Amps with breaking capacity 36 KA , 4 pole, 415V
S & F in replacement single pole and neutral sheet steel powder coated Distribution board for MCBs fitted with bus bar , Neutral link ,Earth Bar and Din rail suitable for use on 240 V, 50 Hz double door SP&N DB system 12 ways complete all as specified
S&F 'C' series SPN MCB 40 to 63 Amps 240V ,50Hz,10kA suitable for lighting and other domestic loads incl all termnials, fitting etc.
Supply fixing connection and testing MCB SP 6-32 Amps 'B' Curve all as specified and as directed by engineer incharge. Make Legrand/Schnieder/L&T Hegger
S&F ceiling rose surface bakelite type 65x50mm three terminals.
M&L for single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of 16 to 32 Amps 240 volt capacity complete all as directed.
M&L in replacement for wiring with two single core 6 sqmm stranded copper conductor PVC insulated and unsheathed cable ISI marked in 25 mm dia, medium grade, PVC conduit concealed in wall for sub main connection including 6 Sqmm PVC insulated unsheathed copper conductor ISI marked as earth wire complete all as specified and directed by Engr-in-charge.
Taking down ceiling fan /exhaust fan complete including overhauling, cleaning with soft solution and painting of the same with white enameled paint including painting of MES number as existing, or rehanging ceiling fan / exhaust fan and connecting up including provision of three core copper conductor cable 1.5 sqmm nominal cross sectional area and length not less than 0.5 mtr from ceiling rose to fan complete all as specified and directed
M&L for earthing in repair complete with galvanized steel earth electrode 60cmX60cmx6 mm thick buried directly in ground (earth pit not less than 2.25m deep below ground level ) with top edge of the plate not less than 1.5m below normal ground level connected to earth lead by means of bolts nuts and washers of GI steel and including earthing pit charcoal, common salt, GI 25X4mm strip as earthing lead 20mm GI medium grade watering pipe 15mm bore light grade protection pipe 5 Mtr length with wire mesh and funnel PCC pit in PCC 1:2:4 type B-1 using 20mm graded stone aggregate, angle iron frame and RCC cover and earth work complete all as shown in electrical plate No.3 of SSR -2009(Part-1).
SupplyIing, laying / fixing and testing in replacement XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 sq mm 4 core in trenches/floor/pole/GI pipe complete including cutting/chasing to any surface and making good to the disturbed surface to match the existing.
Excavation in trenches insoft/loose soil n exc 1.5m deep and not exc 1.5m wide for laying of under ground cable, electric pole and getting out complete all as directed.
Returning filling in including spreading leveling watering and well ramming 25cm in thickness in any type of soil.
Removing excavated material n exc 50m and depositing where directed at a level n exc 1.5m above the starting point.
M&L for dry sand cushioning to under ground cables provided with a layer of sand 8 cm deep before laying the cable, 15 cm depth after laying cable & stretching the cable all as specified and directed.
Supply and lay brick class ‘B’ covering as mechanical protection to cable with well burnt all as spec.
M&L GI tubing light grade with all fitting and fixed in wall and floor or fixed to pole of size 40mm dia.
S K BROTHERS
jyoti parkash sharma
M/S IMTESH BHAT
M/S VINAY KUMAR SHARMA
RAMAN KUMAR
joginder singh and sons
DURGA CONSTRUCTION CO
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .