REPAIR TO REPLACEMENT OF WATER TREATMENT PLANT AND OTHER BR AND EM CONNECTED WORK AT SWIMMING POOL AND DIVING TANK UNDER GE EAST AGRA

Amount

Material and Labour for preparation of old plastered or unplastered surfaces of wall including cornices, pillaster etc by brooming down by steel wire brushing, scrapping down smoke Soot, moulds, moss and trading oil and greasy spots etc and apply two coat of white wash complete as specified and directed.

All as per Item No 1.00 here-in-before but two coat of white wash on Ceiling and -ditto- complete all specified and as directed.

Material and Labour for complete removal of exiting treatment of old distembered surfaces of wall including cornices, pillaster etc by washing, rubbing down,scrapping and stopping holes, etc and apply two coat of distember oil emulsion white or tinted complete all specified and as directed.

Material and labour preparation of old plastered or unplastered surfaces of wall including cornices, pilaster etc by brooming down or steel wire brushing, scrapping down smoke Soot, moulds, moss and trading oil and greasy spots etc and apply one coat of cement base paint white or tinted complete all specified and as directed.

Material and Labour preparation of old painted steel surfaces of any description over 10 cm width or girth and apply one coat of synthetic enamel paint white or tinted complete all as specified and as directed.

Taking down of plaster from wall/ ceiling and soffits of chajja etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified & directed.

Taking up or down steel tubing and connections of walls, ceiling, floor etc of 20mm bore complete all as specified & directed.

Ditto as per item No 7.00 but 25 mm bore complete all as specified & directed.

Demolition of un-reinforced cement concrete in any position and in any description including removing the same where directed complete all as directed by Engineer-in-Charge.

Demolition of brick work built in cement mortar or cement lime mortar including all quoins, arches, pillars etc complete all as specified & directed.

Dismantling of floor, hearth or wall tiles / terrazo(floor,dado) including cement mortar bedding (but not backing),removal rubbish off the premises, all as specified and directed..

Material & labour 10mm thick rendering in CM 1:3 on concrete surfaces of ceiling etc, finished surfaced even & smooth complete all as specified & directed.

Material & labour 10mm thick rendering in CM 1:4 on fair faces of brick/ concrete surfaces finished even and fair complete all as specified and directed.

Material & labour for rendering 15 mm thick on other than fair faces of brick work or concrete surfaces in CM (1:6) surfaces finished even and fair complete all as specified and directed.

Material & labour for preparation of newly plastered surface of wall and applying two coats of cement base paint overa coat of alkali resistant primer complete all as specified and directed.

Material & labour for three coats of white wash on newly plastered surfaces of walls including preparation of surface complete all as specified and directed.

Material & labour for preparation of new plastered surfaces of ceiling and applying three coats of white wash to match the existing as required, complete all as specified & directed.

S&F in repairs 3 mm thick sheet glass, ordinary quality, frosted on one side for window/ventilators in square not exceeding 0.50sqm each pane complete all as specified & directed.

Supply and fix 20mm bore, tubes medium grade, galvanized with all fittings and fixed to walls and ceiling or laid in floors including testing complete all as specified & directed.

All as per serial item No. 19 .00 above, but 25mm bore.

Supply & fixing three layered rotational moulded polyethylene water storage tanks 2000 liters capacity, (cylindrical, vertical in closed top) hoisted and fixed in position with all fittings including 20 mm bore ball brass valve high pressure,with polythene float and flynut complete all as specified including dismantling existing water tanks complete all as specified & directed.

S&F in repair stop valve cast copper alloy high pressure fancy type chromium plated with long shank and cup (concealed type) 15mm dia complete all as specified and directed.(Make:- Jaquar/Plumber/Marc

Supply and fixed in repair angular valve , 15mm dia, cast copper alloy,CP fancy type with long shank and cup screwed down, high pressure ,screwed both ends for iron pipes or for unions and fixed in pipe all as specified and directed.(Make:-Jaquar or equivalent approved by GE)

Supply & fixing in repair brass tubular towel rail, 60 cm long, 20mm bore, chromium plated complete all as specified & directed.

S&F in repair C.P. Toilet paper holder complete all as specified & directed..

S&F in repair 20 mm dia Gun -metal,globe or gate valves,with iron wheel head ,screwed both ends for iron pipe and fixed complete all as specified & directed.

Supply & fixing in repair bib taps cast copper alloy chromium plated with long shank, crutch or butterfly handle, screwed down, screwed for iron pipe of 15mm bore, fixed in repair complete all as specified & directed.(Make:-Jaquar or equivalent approved by GE)

Material & labour for brick work in CM 1:6 with sub class B, brick & straight or curved on plan exceeding 6m mean radius complete all as specified & directed.

Material & labour Non skid coloured Jointfree tiles 7 to 8 mm thick ( square/rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm ,in floors etc.set and jointed in neat cement slurry and pointed in white/coloured cement to match in floor over and including 15mm thick cement screed bed of CM (1:6) complete all as specified & directed.

Material & labour glazed ceramic coloured tiles of size 400x400x8-10mm thick, as in skirting/dado set and jointed in neat cement slurry and pointed in white/coloured cement to match over and including 10mm thick rendering in CM (1:4) complete all as specified & directed.

S & F stainless steel (weather proof) work as in gratings/Jali including fabrication,welding etc complete grade SS 304 as in frame work for swimming pool etc complete all as specified and directed. Make- Jindal/TATA

M&L for providing pre-cast RCC 1:2:4 type B1 using 20 mm graded stone aggregate as in cover (for manholes and drains) including necessary form work set in CM 1:4 with and including demolition complete all as specified and directed. (Note :- Reinforcement shall be measured and paid separately)

S&F mild steel TMT bars 10 mm dia and over cut to length, bent to shape required including cranking, bending, hooking ends and binding with and including MS wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

S&F MS Framed work in small articles such as rungs, handles of man hole covers etc., grills,gratings, etc.. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 made to shape and placing in position complete all as specified and directed

M&L prepration of old painted cement concrete surface/plastered surface and applying two coats of acrylic weather proof paint over a coat of priming with alkali resistant primer including necessary base prepration after complete removal of existing treatment (Change of colour Scheme) complete all as specified and as directed.

Material and Labour for preparation of new plastered surfaces of wall, pillasters,cornices etc and applying two coats of coloured acrylic water emulsion paint over a coat of wall primer (X2) complete all as specified and directed Note:- (a) Each stage i.e. preparation of surfaces,application of primer, application of first coat, application of second coat will be got passed from Engr-in -Charge.(b)Written Warranty for four years or as per manufacturer's instructions, whichever is more is required to be given by contractor for entire work under this item.Make of Arcylic water emulsion paint :- Asian (Apex Ultima) / Nerolac (Excel Total)/ ICI Dulux.Make of primer :- Asian (X2) / Nerolac/ICI.

Material & labour for non-skid coloured ceramic tiles of size 300x300x7-8mm thick (design and colour will be approved by GE ) in floor for swimming pool set and jointed in neat cement slurry and pointed in white/coloured cement to match in floor over and including 15mm thick cement screed bed of CM (1:6) complete all as specified & directed.

Material & labour for glazed coloured ceramic tiles of size 300x200x6-7mm thick (design and colour will be approved by GE) on vertical surfaces such as skirting/dado (for swimming pool) etc, set and jointed in neat cement slurry and pointed in white/ coloured cement to match with existing work over and including 10mm thick rendering in CM 1:4 complete all as specified & directed.

Material & labour for 40mm thick PCC floor(1:2:4) type B1, (using 20 mm graded stone aggregate) finished even and smooth with using extra cement complete all as specified.

Supply only 38 mm wide and 3 mm thick glass dividing strips as laid in floor complete all as specified & directed.

M&L for dark Shade Vitrified Heavy duty full body digital Paving tiles 10 mm thick (square / rectangular in shape) polished, area of each tiles not exceeding 0.12 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed bed or bedding layer of mortar 15 mm thick in CM 1:6 for laying floor finishes complete all as specified and directed. Make-Kajaria Pavigres, "Midas Gris" or equivalent of Somany/Johnson as approved by GE.

S&Fin repair harrison rails/curtain rails, mild steel, chromium plated with fixing brackets, stops, rollers etc. complete all as specified.

S&F in repairs CP over head shower rose of dia n. exc 125 mm, fancy type with arm and wall flange complete all as specified & directed.

S & F in repairs Flushing jet(health faucet) for pedestal pattern WC incl. flexible pipe and Brass Chcomium Plated nuts and blots and water pipe of ize 1150 mm long complete all as specified & directed.

S & F in repairs Flushing jet for pedestal pattern WC incl all fittings complete all as specified & directed.

Dismantling/taking out defective pump from swimming pool/diving tank site including transpotation to civil workshop for repairing,overhauling of pumping set including dismantling into parts, and replacement of defective main shaft,impeller of existing size / make , Bush, sleeves , gland packing ,gaskets, Tyre coupling/ coupling seal, air realse valve ,wornout nuts and bolts including repair and lathing to shaft ,greasing and reassembling, testing complete

Horizontal type centrifugal pumping set of capacity 20 HP ( Swimming pool )

Pumping set of capacity 5 HP ( Diving tank )

Dismantling/taking out defective electric motor from swimming pool/diving tank site including transpotation to civil workshop for rewinding with super enamelled copper winding wire of existing size including dismantling into parts, and replacement of defective ball bearings of existing size / make , wornout nuts and bolts including repair and lathing to shaft ,greasing and reassembling, testing complete

Electric Motor of capacity 20 HP ( Swimming Pool )

Electric Motor of capacity 5 HP ( Diving Tank )

Dismantling/taking out defective submerceble pumping set capcity 10 HP from swimming pool including transpotation to civil workshop for repairing,overhauling of pumping set including dismantling into parts, and replacement of unservicable thrust bearings of existing size / make , Bush , gland packing ,gaskets, seal, wornout nuts and bolts including repair and lathing to shaft ,greasing and rewinding to electric motor with copper wire of existing size and reassembling, testing complete

Horizontal Pressure Filter at swimming pool ,Capacity 40000 Gln per hour

Pressure filter for diving tank , Capacity 6000 Gln per hours

Dismantling/taking out carefully defective MS pipe,stainer,supports and base for pumps etc from filter plants/pumping sets for replacement/modification etc and making good existing surfaces including welding, cutting etc complete all as specified and directed.

Supply and fix in fabrication at site MS stainer pipes , MS pipes, channels, arms, bracings, supports, clamps and back plates duly fabricated from structural steel sections including nuts, bolts, washers, welding, bending colt or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive of one primer coat, complete all as specified and directed .

Removal of foreign material, cleaning & washing properly , screening and grading of old gravels (Filteration Media) of size 10 mm to 50 mm complete all as specified and directed. Note:- Old serviceable gravels (Filtration Media) obtained from Serial Item No.49.00 Here in Before Shall be prepared for re use.

Supply Only, Filtration Media Gravel , size 40 mm to 50 mm,consisting of hard,rounded stones with average specific gravity of not less than 2.5 and free from clay, sand, loam and organic impurities of any kind, conforming to IS 8419 , Part-I, complete all as specified.

Supply Only, Filtration Media Gravel , size 12.1 mm to 20 mm,consisting of hard,rounded stones with average specific gravity of not less than 2.5 and free from clay, sand, loam and organic impurities of any kind, conforming to IS 8419, Part-I, complete all as specified.

Supply Only, Filtration Media Gravel , size 6.1 mm to 12 mm,consisting of hard,rounded stones with average specific gravity of not less than 2.5 and free from clay, sand, loam and organic impurities of any kind, conforming to IS 8419,Part-I, complete all as specified.

Supply Only, Filtration Media Gravel ,size 3.1 to 6 mm,consisting of hard, rounded stones with average specific gravity of not less than 2.5 and free from clay, sand, loam and organic impurities of any kind, conforming to IS 8419,Part-I, complete all as specified.

Supply Only, Filtration Media Gravel/sand ,size 3.0 to 1.5 mm,consisting of hard, rounded stones with average specific gravity of not less than 2.5 and free from clay, sand, loam and organic impurities of any kind, conforming to IS 8419,Part-I, complete all as specified.

Supply and install in replacement automatic chlorine/Alum doser unit having FRP type tank of cap 150 ltrs and 35mmx35mmx3mm angle iron framework in rectangular desgin and FRP linked using isolthatic resin on inside as well as outside and fittted with electronic diphragm pumps with cap of 6 LPH flow rate at an injection pressure 55Kg/sqcm the tank/line using new suitable sizes of pipe connection, fitted with glass tube level indicators as per manufactures design. Type ACD 1550 of M/S UV rich or equivalent of PURA CHLOR by Shree Royala Seema Hi Strength Hypo Ltd make.

M&L in replacement pipe medium grade galvanised with all fittings of make - TATA, Jindal, SAIL laid in trench/wall of size the following sizes :-

50 mm dia

80 mm dia

Supply and fixing in replacement MS/gun metal spindle with check nut and water control sheet to match the existing sluice valve including jointing material such as nuts, bolts, washers and rubber sheet etc all directed by Engr-in-Charge. of size the following sizes :-

300 mm dia

200/250 mm dia

Supply and fixing in replacement butterfly valve flanged confirming to IS including jointing material such as nuts, bolts, washers and rubber sheet etc all directed by Engr-in-Charge. Make - Kirloskar/Leader /L&T/Venus of size the following sizes :-

100 mm dia

80 mm dia

Supply and fixing in replacement PVC insulated copper conductor three core cable flat, 1100 volt grade for submerceble pumping set etc all directed by Engr-in-Charge. Make - Havells/Finolex/Plaza of size the following sizes :-

Supply and fixing on wall/laid in floor, in replacement MS flexible conduit pipe 20 mm dia for insertion PVC three core cable flat, 1100 volt grade for submersible pumping set etc including all fixing material such as saddles, screw etc

M&L for construction of brick masonry valve pit Type ‘B’ of size 90 cm x 90cm x 90cm (internal dimensions of chamber) for 150mm dia pipe depth to be reckoned from the Top of PCC in foundation to top of brick wall including plastering internally and externally flush pointing as the work proceeds complete with 3.15mm thick MS sheet cover , MS handle, locking arrangement and painting complete including dismantling the existing valve pit all as specified and directed by Engineer-In-Charge

Removing of old paint by removers scrubing from filter plant unit complete including pumping sets, pipes, fittings, sluice valves and pump foundation etc for painting and M &L for painting with one coat of superior quality synthetic enamel paint with approved colours on exposed surface of plant etc and writing letters or figures (Block, Roman, Italic or Indian) n exc. 30 cm high and drawing stops, commas, short lines, dashes, hyphens, brackets etc. with synthetic enamel paint [SM/MES No., Capacity, Location etc.] all as directed by Engineer-in-charge:-

Horizontal Pressure Filter Plant complete at swimming pool

Pressure filter Plant for diving tank

Earthing with galvanized steel earth plate electrode 60 Cmx60Cmx6.3mm thick buried in ground (Earth Pit not less than 2.25 meter deep below normal ground level with top edge of the plate not less than 1.5mtr below normal ground level connected to galvanized earth lead strip 32 x 6 mm by means of bolts, nuts, check nut and washer galvanized iron or steel with protection pipe of Gl light grade 40 mm bore up to 3 mtr above ground level along pole fixed with 2 clamp 25 mm x 3mm flat iron and connected to running earth wire at top of poles and watering and watering pipe 20 mm bore medium grade all as shown in electrical plate No 05 of SSR Part –I and connected to Earthing test point all as specified or indicated and testing on completion complete all as specified.

Earthing to pole with GI wire 4 mm dia with galvinised cast iron plate of size 600x600x6 mm buried directly in ground vertically to as depth not less than 2.25 mtr below ground ground level, earth plate shall be packed on all side with charcoal mixed with salt to a thickness of 150 mm connected to GI earth wire 4 mm dia (8SWG) protected by GI pipe 15 mm bore (light grade) and watering pipe 20 mm dia (light grade) 2.5 mtr long with earth work including disposal of surplus soil toa s distance not less than 50 mtr PCC pit RCC cover, flame, funnel, wire mess. The GI earth wire 8SWG under the earth and on the pole upto a height of 1.5 mtr shall also be protected by 15 mm dia GI pipe (light grade) GI pipe to be fixed with pole by the means of 2 Nos flat iron clamp 25x3 size complete with bolts, nuts and washers etc all as specified and shown in electrical plate No 05 of SSR part I-2009

Supply and laying jointing, testing and commissioning cable XLPE/PVC insulated PVC sheathed armoured LT 1100 volt grades heavy duty with aluminium conductor through pipes in duct, on poles, trenches of following size :- Make:- Havells/Polycab/Grandlay

16 sqmm 4 Core

10 Sqmm 2 core

S&F factory made, dust proof, vermin proof , out door type PVC boxs incl MCB SPN 6 Amps,, SPN bus bar, insulator,GI nut, bolts and washers and aluminum lugs etc with and including FI clamp made out of 30 mmx 3 mm , nut and bolts complete all as specified and directed. Make of MCB :- Legrand/ABB/C&S/Schnider/ Siemens

S & F with wall intregral type LED flood light luminaire 70 watt complete make -Philips Cat Pt No BVP120LED70NBFGSIPSUGR or equivalent to Havells Cat Pt No JETANEOFL70WLED757LTG/Wipro

S & F in replacement LED under water light fitting 24 volt DC 15 watt complete with driver to operate with 230 volt AC supply make and type as per existing fitting or as approved by Engineer in Charge.

S & F inreplacement Surface wall mounted LED batten, extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser & integrated electronic driver LED 20 Watt with rod including making connection from ceiling rose/ connector to light fitting with 2 core flexible cable complete all as speecified and directed Make - Cat No ENDURALINEARNEOBS20WLED865SPCWH of Havells or equivalent to Philips /Bajaj

Supplying, installation, commissioning and testing of 415 volts, AC 3 phase 4 wire, 50 Hz LT feeder pillar box (LT panel), indoor type, Pre-wired, made out of CRCA sheet 3mm thick, CPRI approved, Powder coated confirming to Latest IS 8623(CPRI Approved), powder coated RAL-7032 with seven tank Pre-treatmentant and locking arrangement, factory fabricated, weather and vermin proof, both side openable, having two earth terminal, cable glands for all incoming and out going cables, enclosed bus bar chamber ie bus bars should not be appeared while opening of the door from front side and also from back side with and including grouting of LT panel 45 CM above ground level by providing 90 cm long angle iron of size 50 x 50 x 6mm welded on four corners and duly painted the angle iron with two coats of synthetic enameled paint inside and outside over one coat of red oxide primer, embedded in PCC 1 : 2 : 4 type B-1 using 20mm stone aggregate upto 60cm grouted in ground and 15 cm above ground level for coping complete all as specified and directed by Engr-in-charge

04 Nos bus bar of high conductivity aluminium alloy, of 200 Amps of required length mounted on porcelain support including bus bars for all incoming and outgoing MCCBs of suitable current carrying capacity and required length.

ON-OFF indication lamp for phase with toggle switch (RYB) – 03 Nos

Danger notice sticker.

Suitable size aluminium bus bar for incoming and out going connections to MCCB from bus bar.

Incoming :- 160 Amps MCCB, 4 pole, 415 Volts, 36 KA complete - 01 No., Make : Legrand/ABB/C&S/Schnider/Siemens

Out going – (i) Out going – (i) MCCB 40 Amps, four pole, 415 volts, 25 KA complete – 04 Nos, Make – Legrand/ABB/C&S/Schnider/Siemens (ii) Star delta starter of suitable capacity for pump set 20 HP motor -02 Nos and for 7.5 HP submesible pump – 01 No., Make – Legrand/ABB/C&S (iii) MCB 40 Amps, three pole, 415 volts, 10 KA complete – 02 Nos and MCB SPN 32 Amps-02 Nos Make – Legrand/ABB/C&S/Schnider/Siemens (iv) Single phase preventer of suitable capacity – 03 No., Make – Legrand/ABB (v) Time switch Astro type (having longitude and loatitude of Indian cities in memory) 250 volts single phase 20 Amps rating – 01 No., Make – Legrand/ABB/C&S Make for LT Panel/Feeder Pillar box : Havells, Shalab switchgear, Schnider, National Engg works

Taking down monoblock motor with pump complete from the existing foundation/ location and Supply and fixing new one electric monoblock centrifugal type motor with pump set complete 3 phase 440 volt, 3 HP as per existing model/size with required cable connection including duly fixed with existing position of system with the help of any method with suction pipe 40 mm dia, 25 meter long heavy duty including checking and testing on full load complete all as specified and directed

Dismantling/taking out of 7.5 HP blower motor of air compressor from swimming pool for servicing including transpotation to civil workshop for repairing,rewinding and overhauling of motor and servicing to air compressor at site including dismantling into parts, and replacement of unservicable ball bearings of existing size / make , Bush , gland packing ,gaskets, belts, air realse valve, ,greasing and reassembling, testing complete all as specified and as directed.

Supply and errection of steel tubular swaged pole 11 mtr long type 410-SP-55 complete with CI base plate . Finial taper plug, bolts, nuts and screws etc including necessary excavation and earth work, in loose/soft soil of size 600 x 600 x 1900mm, PCC 1:3:6 type C-2 in foundation, PCC 1:2:4 type B-1 in plinth block/coping disposal of surplus soil up to 50 M, Painting inside with black bitumen paint and out side with two coats of aluminum paint over one coat of red oxide Primer and numbering of poles and black & white striping up to 1.5 Mtr height, 300mm wide complete all as specified and as directed.

M/S BEE ESS ENTERPRISES

gul engineers co.