RFP for construction of ICCC FCTSL and FSCL building at Faridabad Haryana India including defect liability period of two years and maintenance for 5 years under Smart City Mission

Amount

Excavation for pipelines running under pressure in trenches and pits, in open areas, where disposal of surplus earth is done alongwith the alignment including trimming & dressing sides, leveling of beds of trenches to correct grade, cutting joint holes, cutting trees and bushes, etc., refilling consolidation and entering of refill, in 15 cm layers and restoration of unmetalled or unpaved surface to its original condition, including the cost of dewatering of rain water, diversion of traffic, night signals, fixing caution boards, watching, fenching etc., and outside the town in ORDINARY SOIL :¬With timbering and shoring --(ii) exceeding 1.5 metress depth, but upto 2.25 metress depth

Excavation for pipelines running under pressure in trenches and pits, in open areas, where disposal of surplus earth is done alongwith the alignment including trimming & dressing sides, leveling of beds of trenches to correct grade, cutting joint holes, cutting trees and bushes, etc., refilling consolidation and entering of refill, in 15 cm layers and restoration of unmetalled or unpaved surface to its original condition, including the cost of dewatering of rain water, diversion of traffic, night signals, fixing caution boards, watching, fenching etc., and outside the town in ORDINARY SOIL :¬With timbering and shoring exceeding 2.25 metress depth, but upto 3.00 metress depth.

Excavation for pipelines running under pressure in trenches and pits, in open areas, where disposal of surplus earth is done alongwith the alignment including trimming & dressing sides, leveling of beds of trenches to correct grade, cutting joint holes, cutting trees and bushes, etc., refilling consolidation and entering of refill, in 15 cm layers and restoration of unmetalled or unpaved surface to its original condition, including the cost of dewatering of rain water, diversion of traffic, night signals, fixing caution boards, watching, fenching etc., and outside the town in ORDINARY SOIL :¬With timbering and shoring exceeding 3.00 metress depth, but upto 4.5 metress depth.

FINISHING WORKS:-Painting new letters and figures of any shade with synthetic enamel paint black or any other approved co lour to give an even shade. (i)Hindi (matras, commas and the like not to be measured or paid for, half letters shall be treated as half)

FINISHING WORKS Painting new letters and figures of any shade with synthetic enamel paint black or any other approved co lour to give an even shade (i) English and Roman (Hyphons and the like not to be measured and paid for)

FINISHING WORKS:-Painting new letters and figures of any shade with synthetic enamel paint black or any other approved co lour to give an even shade:- italic

FINISHING WORKS:-borders and arrows upto 6 cm in width

FINISHING WORKS:-Applying priming coat with metal primer on new steel or iron work including preparation of surface

FINISHING WORKS:-Supply and fixing of Nylon/PP Carpet flooring tiles for reputed company with any colours,pattern and size all complete as per satisfaction of Engineer-in-charge

Supply and errection double pole/four pole isolator suitable for operation on 240/415 volt, 50 HZ AC supply installed in exisiting in sheet enclosoure including making necessary connection and material requried to complete the job in all respect upto the entire satisfaction of engineer in charge ISOLATORS:-40 amps

Supply and errection double pole/four pole isolator suitable for operation on 240/415 volt, 50 HZ AC supply installed in exisiting in sheet enclosoure including making necessary connection and material requried to complete the job in all respect upto the entire satisfaction of engineer in charge ISOLATORS:-63 amps

Electrical Works(Distribution Board):-Providing & erecting prewired meter module suitable for MCCB panel board

LT CABLES:-Supplying of 1.1 kV LT UG cable having aluminium conductor PVC insulated, extruded inner sheathes, galvanized, steed strip (except 2Cx10Sq.mm wire armoured) confirming to IS 3975:1990 (No. of strip indicated in GTP) & extruded PVC outer sheathed armoured cable with specified IS-1554 Part-1:1988 & confirming to GTP of GROUP A 3.5 core 300sq.mm

LT CABLES:-Supplying of 1.1 kV LT UG cable having aluminium conductor PVC insulated, extruded inner sheathes, galvanized, steed strip (except 2Cx10Sq.mm wire armoured) confirming to IS 3975:1990 (No. of strip indicated in GTP) & extruded PVC outer sheathed armoured cable with specified IS-1554 Part-1:1988 & confirming to GTP of GROUP A 3.5 core 240sq.mm

LT CABLES:-Supplying of 1.1 kV LT UG cable having aluminium conductor PVC insulated, extruded inner sheathes, galvanized, steed strip (except 2Cx10Sq.mm wire armoured) confirming to IS 3975:1990 (No. of strip indicated in GTP) & extruded PVC outer sheathed armoured cable with specified IS-1554 Part-1:1988 & confirming to GTP of GROUP A 3.5 core 150sq.mm

LT CABLES:-Supplying of 1.1 kV LT UG cable having aluminium conductor PVC insulated, extruded inner sheathes, galvanized, steed strip (except 2Cx10Sq.mm wire armoured) confirming to IS 3975:1990 (No. of strip indicated in GTP) & extruded PVC outer sheathed armoured cable with specified IS-1554 Part-1:1988 & confirming to GTP of GROUP A 3.5 core 120sq.mm

LT CABLES:-Supplying of 1.1 kV LT UG cable having aluminium conductor PVC insulated, extruded inner sheathes, galvanized, steed strip (except 2Cx10Sq.mm wire armoured) confirming to IS 3975:1990 (No. of strip indicated in GTP) & extruded PVC outer sheathed armoured cable with specified IS-1554 Part-1:1988 & confirming to GTP of GROUP A 3.5 core 95sq.mm

LT CABLES:-Supplying of 1.1 kV LT UG cable having aluminium conductor PVC insulated, extruded inner sheathes, galvanized, steed strip (except 2Cx10Sq.mm wire armoured) confirming to IS 3975:1990 (No. of strip indicated in GTP) & extruded PVC outer sheathed armoured cable with specified IS-1554 Part-1:1988 & confirming to GTP of GROUP A 3.5 core 70sq.mm

LT CABLES:-Supplying of 1.1 kV LT UG cable having aluminium conductor PVC insulated, extruded inner sheathes, galvanized, steed strip (except 2Cx10Sq.mm wire armoured) confirming to IS 3975:1990 (No. of strip indicated in GTP) & extruded PVC outer sheathed armoured cable with specified IS-1554 Part-1:1988 & confirming to GTP of GROUP A 3.5 core 50sq.mm

LT CABLES:-Supplying of 1.1 kV LT UG cable having aluminium conductor PVC insulated, extruded inner sheathes, galvanized, steed strip (except 2Cx10Sq.mm wire armoured) confirming to IS 3975:1990 (No. of strip indicated in GTP) & extruded PVC outer sheathed armoured cable with specified IS-1554 Part-1:1988 & confirming to GTP of GROUP A 3.5 core 35sq.mm

LT CABLES:-Supplying of 1.1 kV LT UG cable having aluminium conductor PVC insulated, extruded inner sheathes, galvanized, steed strip (except 2Cx10Sq.mm wire armoured) confirming to IS 3975:1990 (No. of strip indicated in GTP) & extruded PVC outer sheathed armoured cable with specified IS-1554 Part-1:1988 & confirming to GTP of GROUP A 3 core 35sq.mm

Supplying, erecting & terminating of 1.1 kV LT UG cable having copper conductor PVC insulated, extruded inner sheathes, galvanized, steed strip (except 2Cx10Sq.mm wire armoured) confirming to IS 3975:1990 (No. of strip indicated in GTP) & extruded PVC outer sheathed armoured cable with specified IS-1554 Part-1:1988 & confirming to GTP of GROUP A 4 core 16sq.mm

Supplying, erecting & terminating of 1.1 kV LT UG cable having copper conductor PVC insulated, extruded inner sheathes, galvanized, steed strip (except 2Cx10Sq.mm wire armoured) confirming to IS 3975:1990 (No. of strip indicated in GTP) & extruded PVC outer sheathed armoured cable with specified IS-1554 Part-1:1988 & confirming to GTP of GROUP A 4 core 10sq.mm

Supplying, erecting & terminating of 1.1 kV LT UG cable having copper conductor PVC insulated, extruded inner sheathes, galvanized, steed strip (except 2Cx10Sq.mm wire armoured) confirming to IS 3975:1990 (No. of strip indicated in GTP) & extruded PVC outer sheathed armoured cable with specified IS-1554 Part-1:1988 & confirming to GTP of GROUP A 4 core 6sq.mm

Supplying, erecting & terminating of 1.1 kV LT UG cable having copper conductor PVC insulated, extruded inner sheathes, galvanized, steed strip (except 2Cx10Sq.mm wire armoured) confirming to IS 3975:1990 (No. of strip indicated in GTP) & extruded PVC outer sheathed armoured cable with specified IS-1554 Part-1:1988 & confirming to GTP of GROUP A 4 core 4sq.mm

Supplying, erecting & terminating of 1.1 kV LT UG cable having copper conductor PVC insulated, extruded inner sheathes, galvanized, steed strip (except 2Cx10Sq.mm wire armoured) confirming to IS 3975:1990 (No. of strip indicated in GTP) & extruded PVC outer sheathed armoured cable with specified IS-1554 Part-1:1988 & confirming to GTP of GROUP A 3 core 4sq.mm

CABLE LAYING Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering: 3.5 core 300sq.mm

CABLE LAYING Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering: 3.5 core 240sq.mm

CABLE LAYING Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering: 3.5 core 150sq.mm

CABLE LAYING Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering: 3.5 core 120sq.mm

CABLE LAYING Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering: 3.5 core 95sq.mm

CABLE LAYING Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering: 3.5 core 70sq.mm

CABLE LAYING Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering: 3.5 core 50sq.mm

CABLE LAYING Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering: 3.5 core 35sq.mm

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required 3½ X 300 sq. mm (70mm)

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required 3½ X 240 sq. mm (62mm)

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required 3½ X 150 sq. mm (50mm)

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required 3½ X 95 sq. mm (45mm)

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required 3½ X 70 sq. mm (38mm)

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required 3½ X 50 sq. mm (35mm)

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required 3½ X 35 sq. mm (32mm)

Supplying of recess mounting non integral type ........ LED w luminaire comprising of pressure decast/extruded aluminium housing, with spring loaded false ceiling clamps, Power LEDs with CCT 6500 degree K, CRI> 70%. efficacy > 100 lumen per watt, 120degree beam spread, life> 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The lamp compartment is enclosed with anti glare opal diffuser which enhances the lighting level LEDs are driven by HF electronic driver integrated in a separate control gear assembly., with PF > 0.95, power loss should< 5% of lamp wattage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 volts. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition.LED modular down light 2'x2' /1' X 4' 34 -36watt

Supply of round/square recess/surface mounted rolling type LED Down light with ...... W GU 10 LED Lamp Rib Fabricated from diecast aluminium with white powder coated prewired to mains connector & has swivelling unit of aluminium die cast eye ball & LED Lamp position retained by circular wire spring, with Life of 25000 burning hours & 70% lumen maintenance with CRI > 80. Power Input: 220-240V @50/60Hz & Power factor >0.9 along with CE approved. 2years Warranty against any manufacturing defect working under standard electrical condition LED square or round down light 10-12W

Supplying of .....feet -PVC Batten with integrated LED tube .... W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI > 80. Power Input: 220-240V@ 50/60Hz & Power factor >0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition.- LED light fitting 1 x 4'- 20/22 w

Supplying of .....feet -PVC Batten with integrated LED tube .... W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI > 80. Power Input: 220-240V@ 50/60Hz & Power factor >0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition-LED light fitting 1 x 2' - 9/10W

Supplying & erecting on line UPS pure sine wave of ...kVA capacity complete with standard features, along with necessary SMF batteries for 30 mins battery backup-80kVA

Supplying & erecting on line UPS pure sine wave of ...kVA capacity complete with standard features, along with necessary SMF batteries for 30 mins battery backup-15 kVA

ELECTRICAL LT PANELS --Design, Manufacture, Supplying, Preparation and getting approval on General arrangement drawings from consultants office, Transport to the site, Loading and unloading at site, installation, testing & commissioning of the following Modular cubical type construction, Electrical Panels up to 500Volts ±5%, 3Phase, 4Wire, 50Hz ±5%, are housed in CRCA Sheet of 1.6mm for non-stress members & 2.0mm for all stress bearing members and 3.0mm for Removable Glad Plate & base Frame Materiel, unless specified otherwise, vermin proof hinged lockable doors & door earthed for each compartment provide bus bar interconnections for incoming and outgoing, fixed Type, Single front compartmentalized, totally enclosed, free standing, Floor / Wall mounted type, indoor (IP:52) / outdoor (IP:65) , extendable type, dust and vermin Proof, duly wired up and ready for installation at site. The Bus bars will be as per the IEC 6068-3-247 Standard.Also, refer to General Notes and Specifications for Panels/ Boards.All Switchgear makes shall be from approved List of makes.Only one make of switchgear to be used in a board / Panel.All live accessible parts shall be shrouded and all equipment shall be finger touch proof. The busbars insulation shall be with heat shrinkable sleeves. SMC shrouds busbar supports shall be used.Minimum Air Clearances between bus bars;P-P=25mm, P-N=20mm,P-E=20mm and N-E=20mm--Also, refer to General Notes and Specifications for Panels/ Boards./MCCM's/MCB's/SLD--Minimum Air Clearances between bus bars;--P-P=25mm, P-N=20mm,P-E=20mm and N-E=20mm.Main LT Panel--INCOMER --1 Nos. 800 Amps 4P 36kA EDO, ACB with Microprocessor based Releases--BUSBARS SECTIONS-800 amps TPN, 50kA, 430volts grade busbar chamber of suitable length with Al busbars. All busbars and interconnections shall be of suitable size Al busbar, current density of bus-bars shall not be more than 0.8 Amps/ sq.mm cross sectional area of Bus Bar.OUTGOING SECTION--4 No. of 250 A TPN MCCB--3 No. of 200 A TPN MCCB--1 No. of 160A TPN MCCB--4 No. of 100A TPN MCCB--refr. SLD

DG SYNC PANEL - Supplying, erecting, testing and commissioning of Microprocessor based generator control unit (synchronization panel) panel suitable for diesel generating set of above 500 kVA upto 750 kVA capacity Three phase, 415 Volts, 50Hz A.C. with all standard features and safeties etc as per specification no. GEN-SYNC.

Third Floor Panel--INCOMER--1 Nos. 250 Amps TPN MCCB with Interlocking CT's,indication Lamps etc--BUSBARS SECTIONS--250 amps TPN, 25kA, 430volts grade busbar chamber of suitable length with Al busbars. All busbars and interconnections shall be of suitable size Al busbar, current density of bus-bars shall not be more than 0.8 Amps/ sq.mm cross sectional area of Bus Bar.-OUTGOING SECTION--2 No. of 125 A TPN MCCB--2 No. of 100 A TPN MCCB--4 No. of 63 A TPN pole MCB--1 No. of 40 A TPN pole MCB.--1 No. of 32 A TPN pole MCB. Refr SLD

Third Floor UPS Panel--INCOMER--1 Nos. 125 Amps TPN MCCB with CT's,indication Lamps etc --BUSBARS SECTIONS--125 amps TPN, 25kA, 430volts grade busbar chamber of suitable length with Al busbars. All busbars and interconnections shall be of suitable size Al busbar, current density of bus-bars shall not be more than 0.8 Amps/ sq.mm cross sectional area of Bus Bar.-OUTGOING SECTION--2 No. of 100 A TPN MCCB--3 No. of 63 A TPN pole MCB. Rfr SLD

Third Floor HVAC Panel--INCOMER--1 Nos. 100 Amps TPN MCCB with CT's,indication Lamps etc. --BUSBARS SECTIONS-100 amps TPN, 25kA, 430volts grade busbar chamber of suitable length with Al busbars. All busbars and interconnections shall be of suitable size Al busbar, current density of bus-bars shall not be more than 0.8 Amps/ sq.mm cross sectional area of Bus Bar.---OUTGOING SECTION--3 No. of 100 A TPN pole MCB-2 No. of 63 A TPN pole MCB--2 No. of 32 A TPN pole MCB. Refr SLD

Fourth Floor Panel--INCOMER--1 Nos. 160 Amps TPN MCCB with Interlocking with CT's,indication Lamps etc--BUSBARS SECTIONS--200 amps TPN, 25kA, 430volts grade busbar chamber of suitable length with Al busbars. All busbars and interconnections shall be of suitable size Al busbar, current density of bus-bars shall not be more than 0.8 Amps/ sq.mm cross sectional area of Bus Bar.--OUTGOING SECTION--3 No. of 100 A TPN MCCB--4 No. of 63 A TPN pole MCB--1 No. of 40 A TPN pole MCB.--1 No. of 32 A TPN pole MCB. refr SLD

Fourth Floor HVAC Panel--INCOMER--1 Nos. 100 Amps TPN MCCB with CT's,indication Lamps etc --BUSBARS SECTIONS--100 amps TPN, 25kA, 430volts grade busbar chamber of suitable length with Al busbars. All busbars and interconnections shall be of suitable size Al busbar, current density of bus-bars shall not be more than 0.8 Amps/ sq.mm cross sectional area of Bus Bar.--OUTGOING SECTION--4 No. of 40 A TPN pole MCB.--3 No. of 25 A TPN pole MCB. Rfer SLD

Common Services Panel--INCOMER--1 Nos. 100 Amps TPN MCCB with Interlocking with CT's,indication Lamps etc--BUSBARS SECTIONS--100 amps TPN, 10kA, 430volts grade busbar chamber of suitable length with Al busbars. All busbars and interconnections shall be of suitable size Al busbar, current density of bus-bars shall not be more than 0.8 Amps/ sq.mm cross sectional area of Bus Bar.--OUTGOING SECTION--6 No. of 32 A TPN pole MCB. Refer SLD

Plumbing Panel-INCOMER--1 Nos. 40 Amps TPN MCB --BUSBARS SECTIONS--60 amps TPN, 10kA, 430volts grade busbar chamber of suitable length with Al busbars. All busbars and interconnections shall be of suitable size Al busbar, current density of bus-bars shall not be more than 0.8 Amps/ sq.mm cross sectional area of Bus Bar.---OUTGOING SECTION--6 No. of 32 A TPN pole MCB with DOL Starter--4 No. of 32 A TPN pole MCB. Rfer SLD

Firefighting Panel--INCOMER---1 Nos. 200 Amps TPN MCCB with Interlocking with CT's,indication Lamps etc--BUSBARS SECTIONS--200 amps TPN, 25kA, 430volts grade busbar chamber of suitable length with Al busbars. All busbars and interconnections shall be of suitable size Al busbar, current density of bus-bars shall not be more than 0.8 Amps/ sq.mm cross sectional area of Bus Bar.OUTGOING SECTION--3 No. of 100 A TPN MCCB with Star-Delta Starter--3 No. of 32 A TPN pole MCB with DOL Starter--2 No. of 100 A TPN MCCB --2 No. of 32 A TPN pole MCB. Refer SLD

Supplying and erecting 250 kVAr, 440 V three phase, 50 Hz., thyrister switched micro APFC passive filter panel, consisting of suitable steps of APP type capacitor units with harmonic filter reactors, as per specification no CP-ED/APFC

Providing & erecting Hot dipped galvanized ladder type cable tray manufactured from 16 swg (1.6 mm thick) GI sheet of 300 mm width & 100 mm height comprising all required standard accessories

Providing & erecting Hot dipped galvanized cover suitable for perforated type cable tray manufactured from 18 swg (1.2 mm thick) GI sheet of 300 mm width & 20 mm height complete with necessary hardware in approved manner.

Providing & erecting Hot dipped galvanized cover suitable for perforated type cable tray manufactured from 18 swg (1.2 mm thick) GI sheet of 150 mm width & 20 mm height complete with necessary hardware in approved manner.

Supply and installation of single or multi compartment GI raceway of cross section given below laid in floor complete as specified.(a) Raceway (b) All bends, joints, supports, end plates couplers earth conductivity:-300 x 50 Double compartment

Supply and installation of single or multi compartment GI raceway of cross section given below laid in floor complete as specified.(a) Raceway (b) All bends, joints, supports, end plates couplers earth conductivity:-150 x 50 Single compartment

Providing and fixing of 2 mm thick pregavanised sheet outlet junction box including providing cover with provision to adjust overall height, knock outs on four sides to accept raceways of specified sizes and cutouts to fix required outlets for following size of race ways.:-450 mm wide x 40 mm deep raceway with 3/2/1 compatments

Providing and fixing of 2 mm thick pregavanised sheet outlet junction box including providing cover with provision to adjust overall height, knock outs on four sides to accept raceways of specified sizes and cutouts to fix required outlets for following size of race ways.:-200 mm wide x 40 mm deep single compatment raceway

Supply and erection of copper tape 32mm x 6mm thick from earch electroded directly in ground and surface fixed with suitable copper stapples of same size

Supply and installation of Test link box for down conductor of size 25x6mm G.I strip

TRANSFORMERS:- 630kVA , three phase 11kV/433-255 V, oil immersed naturally coolled copper wound outdoor type Distribution Transformers as per latest Nigam Technical Specification with ammendments relevant ISS with latest amendments

TRANSFORMERS:- Erection of Sub-station complete with accessories. Erection of transformer on plinth above 500kVA to 1000 kVA

TRANSFORMERS:- Erection of Cable Box with fittings

Supplying, erecting and commissioning of diesel generating set with alternator of 500 kVA output continuous rating, 3 Phase, 415 V, 50c/s 0.8 p. f. A.C a totally enclosed air cooled / liquid cooled multi-cylinder diesel engine developing suitable BHP at 1500 rpm with 10% overload for 1 hour in 12 hours, along with standard accessories, self-excited, self-regulated, screen protected alternator with static excitation system running at 1500 RPM as per IS 4722- 2001 with voltage regulation +/- 5 %. Both the engine and alternator direct coupled on a common fabricated steel base frame and mounted on anti-vibrating pads with standard control panel comprising of meters, switchgears, indicators connected with suitable wires/cables, the complete set enclosed in composite Acoustic enclosure as fully assembled integral unit made of 16 SWG CRCA Sheet, sound absorbing material to restrict sound level upto 75 dB at 1.0 m, provided with first filling of oil, diesel etc. and obtaining necessary approval from Electrical Inspector as per specification no. GENDG

The scchedule fo quantities shall be read in conjenction with the technical specification, general and special condition as well as all tender drwaings providing and installating of all conduting and structured cabling for data system including providing and fiixing of the following, all necessary special and fittings, approved covered plat inspection, junction and outlet boxes, 2mm thick outlet boxes and juntion boxes, all fixing accessories such as clips, nails, screws etc. Providing and fixing of approved saddels, hock and grouting the same as required in the case of all expose conded and acessories in wall, floors etc. during construction and /or cutting chassis and making good as accessories in case of all condute work. Supply, installation, testing and commissioning of 4 pair Category 6 cable consisting of 24 AWG solid copper conductors and as per the specification. The cable shall have flexible jacket and ripcord for easy Stripability

Supply, installation, testing and commissioning of 6 pair fibre optic armoured cable as per the specification.

Supply and installation of flush mounted Enhanced Category 6 T 568 A or B) outlet. The plastic shall be high impact, flame-retardant, UL rate thermoplastic. Dust cover / blank shall be provided to protect unused faceplate openings. Termination caps and plastic cover shall be provided to protect jack wiring:-Single outlet faceplate with RJ-45 jack with information outlet

Supply and fixing of 16 guage MS conduits in following sizes including cost of junction boxes, bends, elbows, sockets, tees etc. laying in slab cutting chasis and making good or surface mounted including all fixing hardware.- 25 mm dia

Providing and fixing in position the following 16 gauge PVC conduits concealed or exposed as called for including all acessories i.e. bends, junction boxes, outlet boxes with cover plates of approved make and design-25 mm Dia

Supply of following 19 inch width rack for ethernet switches with A.C. distribution box, wire manager, fan tray, lockable front tinted glass door and two pair angle to support the switch installed in the rack. 12 U Rack

Supply of following 19 inch width rack for ethernet switches with A.C. distribution box, wire manager, fan tray, lockable front tinted glass door and two pair angle to support the switch installed in the rack. 9 U Rack

Supply of following Category 6, IDC patch panel prepackaged with wiring block with legs with legs insert labels, label holders, jumper troughs, metal back panel, duct assembly, screws, washers and an instruction sheet for termination of incoming pairs.:-48 port Network Switch

Supply of following Category 6, IDC patch panel prepackaged with wiring block with legs with legs insert labels, label holders, jumper troughs, metal back panel, duct assembly, screws, washers and an instruction sheet for termination of incoming pairs.:-42 port Network Switch

Supplying and fixing of Cat 6 Patch cord - 1 mtr

Supplying, installation, testing & commissioning of 6 zone, voice alarm controller with USB, MP3 player (including 6 zone button paging station) with seamless integration facility with main fire alarm panel for voice evacuation complete as required.(Note : Power Amplifire shall be 500W for the complete configuration)

Supplying, installation, testing & commissioning of Voice command keypad 6 zone, with microphone assembly complete as required.

Supplying, installation, testing & commissioning of 1.5/3/6W metal box ceiling/wall speakers complete as required.

Supplying & laying of 2x1.5 sqmm fire survival armoured cable, 600/1000V rated with annealed copper conductor having glass mica fire barrier tape covered by an extruded layer of Cross Linkable Ethylene Propylene Rubber (EPR) insulation and LSZH inner bedding, steel wire armouring & LSZH outer sheath complete as required.

Supply, installation, testing and commissioning of MDF patch panel prepackaged with wiring block with legs, insert labels, label holders, jumper troughs, metal back panel duct assembly, screws washers and an instruction sheet for termination of incoming pairs. Rate shall include suitable size of lockable 1.6mm thick CRCA sheet steel enclosure duly powder coated. The cost shall be complete with fixing arrangements, foundations etc as required:- 100 pair Tag Block

Supply, installation, testing and commissioning of MDF patch panel prepackaged with wiring block with legs, insert labels, label holders, jumper troughs, metal back panel duct assembly, screws washers and an instruction sheet for termination of incoming pairs. Rate shall include suitable size of lockable 1.6mm thick CRCA sheet steel enclosure duly powder coated. The cost shall be complete with fixing arrangements, foundations etc as required:- Patch Cord for Voice 1 mtr for rack end

Supply, installation, testing and commissioning of Riser cable consisting of multiple core or solid copper conductors of 24 AWG size insulated with expanded polyethylene covered by a PVC skin and inner shielding for grounding. The core shall be covered by a layer of plastic tape and overlaid with a corrugated PVC plastic. The cable shall be as per the specifications laid down in the tender:-100 Pair

Supply, installation, testing and commissioning of 4 pair Category 6 cable consisting of 23 AWG solid copper conductors and as per the specification. The cable should have flexible jacket and ripcord for easy stripability.:- 4-Pair

Providing and fixing in position the following 16 gauge PVC conduits concealed or exposed as called for including all acessories i.e. bends, junction boxes, outlet boxes with cover plates of approved make and design..:- 25 mm dia conduit

Supply and installation, testing and commissioning following size KRONE make telephone tag block in lockable 16 gauge sheet steel enclosure complete as required completely flushed mounted.:- 50 pair Krone type tag block

Supply and installation, testing and commissioning following size KRONE make telephone tag block in lockable 16 gauge sheet steel enclosure complete as required completely flushed mounted.:- Junction tag Box

Supply and installation of flush mounted Category 6 T 568 A or B outlet with G.I back box of adequate depth for good termination and all required accessories. The plastic shall be high impact, flame-retardant UL rated thermoplastic. Dust cover / Blank shall be provided to protect unused face plate openings. Termination cap and plastic cover shall be provided to protect jack wiring.:- Single outlet face plate with RJ-11 jack

Supply installtion Testing commissioning of 4.0 Megapixel , BULLET Camera with 4 megapixel HD 2.8-12mm Varifocal Lens, 36 IR LED upto 20 meters, Supports Android Apps.including outdoor housing with fixing arrangement etc ( IP66) Protection. POE Based as Required.

Supply installtion Testing commissioning of 2.0 Megapixel , IP Vandal Dome Camera with 2 megapixel HD 2.8-12mm Varifocal Lens, 36 IR LED upto 10 meters, Supports Android Apps IP54 Protection Rating. POE Based as Required.

Supply installtion Testing commissioning of Include NVR Software having Recording Storage System complete for whole system and camaras consisting sufficient nos. of 8 channels video recording on D1 resolution at real time, Support 4 hot-swappable hard disk direct attached. Recording Storage for 30 days at 25 fps H.264 resolution including 16 TB HDD Per NVR, Video survelience series HDD as required. with PC server, capable of managing and controlling recording parameters with high end features as required . License covers 10 video channels,..

Supply installtion Testing commissioning of 40" Wall Mounted LCD for display as required as per specifications and drawing

Supply installtion Testing commissioning of 6U Rack with glass front door, steel rear door, power supply, MCB, cable manager, drawer shelves and wiring channels to accommodate CCTV systems equipment and accessories as mentioned in the BOQ above and including all connections and terminations as required.

Supply installtion Testing commissioning of PoE Ethernet switch with suitable rack with 24 ports RJ45 10 base 1000 T with complete as required -Network Switch

Supply, Laying, termination, Installtion of 2 Core, 1.5 sqmm solid cu. conductor cable as required as per specifications

Supply, Laying, termination, Installtion of UTP CAT6 (A) armoured Cable as required as per specifications & Drawing.

Supply, Installation and Commisioning of dot matric printer.

Supply, Laying, termination, Installtion of 25mm PVC Conduit 1.8 mm thick as required as per specifications

Supplying Installing, testing and commissioning of 63mm mm dia single headed Gun mental Hydrant Valve with flanged inlet, stop valve, spindle and cast iron hand wheel. It has a female instantaneous outlet with Blank Cap and is Hydrostatically tested to 21 Kgf/cm2 pressure having a flow rate of 900 LPM at 5.5 Kgf/cm2 of pressure with blank cap and wheel as per IS 5290 etc. complete Make : WINCO/NEW Age including cost of materials, labour, HOM complete as per specifications.

Supplying and fixing Single headed external yardhydrant valve with 1 No. 63 mm dia instantaneous FMGunmetal/Stainless Steel coupling and cast iron wheel,ISI marked, conforming to IS 5290 (type A) with blankGunmetal/Stainless Steel cap and chain as required :- Single headed Stainless steel

Supplying Installing, testing and commissioning of Reinforced Rubber Lined RRL Fire hose of 63mm dia 15m length as per IS 8423 binded with one set of male and Female lnstantainious Gun metal coupling as per IS 903 WINCO/NEW AGE complete including cost of materials, labour, HOM complete as per specifications.

Supplying Installing, testing and commissioning of 19mm dia 36.50m length hose with rubber lining smooth bore, reinforced of natural/synthetic fibres, a rubber cover finish shall be smooth, fluted or fabric marked with minimum thickness of 1.50mm and to with stand a working pressure of 1OKgf/sqcm confirms & tested as per IS 444 including cost of materials, labour, HOM complete as per specifications..

Supplying Installing, testing and commissioning of Gun metal Branch pipe size of 63mm dia x19mm dia as per IS 903 Make: WINCO/NEW AGE complete including cost of materials, labour, HOM complete as per specifications.

Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required.:- 50mm dia

Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required.:- 65 mm dia

Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required.:- 150mm

Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required.:- 200 mm

Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts,washers etc.as required:- 50mm dia

Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts,washers etc.as required:- 150mm dia

Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts,washers etc.as required:- 200mm dia

Supplying, fixing, testing & commissioning of double flanged sluice valve of rating PN 1.6 with non rising spindle, bronze/gun metal seat, ISI marked complete with nuts, bolts, washers, gaskets and conforming to IS 780 of following sizes as required :- 250mm dia

15.00 Providing, installation, testing and commissioning of stainless steel Y-strainer fabricated out of 1.6 mm thick stainless steel, Grade 304, sheet with 3 mm dia holes with stainless steel flange:- 65mm dia

15.00 Providing, installation, testing and commissioning of stainless steel Y-strainer fabricated out of 1.6 mm thick stainless steel, Grade 304, sheet with 3 mm dia holes with stainless steel flange:- 200mm dia

Supplying and installing pressure gauge of 100 mm dia., 0-300 PSI or 0-14 kg per cm square fitted with 12/15 mm dia. pad cock valve, and G.I. pipe, elbow etc. complete as per specification no. FF-FFA/PG

Providing & fixing of pressure switch in M.S. pipe line Including connection etc. as required

Supplying and fixing orifice plate made out of 6 mm thick stainless steel (Grade 304) with orifice of required size to be fitted between flange & landing valve of external and internal hydrants to reduce pressure at the outlet to the level of 5.5 kg/cm2 complete as required

Supplying and erecting M.S./CRCA cabinet for housing single hydrant valve (size 400 x 400 x 400mm.) made from 16 SWG sheet and angle iron 25 mm. x 25 mm. x 4 mm. having front doors with viewing glass (8"x6") and locking arrangement with necessaryfixing material such as rubber bidding etc. duly painted in post box red colour.

Supplying and erecting M.S./CRCA cabinet for housing FireBrigade / SIEMESE connections (size 1250 x 400 x 300 mm.)made from 16 SWG sheet and angle iron 25 mm. x 25 mm. x 4 mm. having front doors with viewing glass (8" x 6") and locking arrangement with necessary fixing material such as rubber bidding etc. duly painted in post box red colour.

Supplying Installing, testing and commissioning of hydraulicallying operated sprinkler cabit Valve with water meter gong bell and trims as required, pressure gauges drain Valve, ball Valves check valve, strainer etc. including cost of materials, labour, HOM complete as per specifications.do- 150 mm dia.

Providing & fixing flow switch in following sizes M.S.pipe including connection etc as required. 50mm dia.

Providing & fixing flow switch in following sizes M.S.pipe including connection etc as required. 80 mm dia

Providing & fixing flow switch in following sizes M.S.pipe including connection etc as required. 150 mm dia

Providing, fixing, testing & commissioning of installation control valve of cast iron body,brass/bronze working parts comprising of water motoralarm, bronze seat clapper, clapper arm andhydraulically driven mechanical gong bell to soundcontinuous alarm when the wet riser/sprinkler systemactivates, pressure gauges, emergencyreleases, strainer, pressure switch, cock valve complete withdrain valve and bypass, test control box, ball valves,MS pipe of required size, flanges, orifice plate, gasket tetc of follwing sizes as required . 150 mm dia

Supplying, installation, testing & commissioning ofsprinkler flexible pipe (UL Listed) of stainless steelcomplete with 15 NPT on reducer thread withmaximum workingpressure of 175 PSI test pressure of875 PSI (Burst) with branch line (Inlet) 25mm NPTmale thread to sprinkler head (Outlet) 15mm NPTfemale thread with reducer, nipple, 2 side brackets, center bracket, stockbar of following sizes complete asrequired. 150 mm dia

Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required : (It should be factory ready made). 2 way-100 mm dia Pipe

Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required : (It should be factory ready made). 4 way - 150 mm dia Pipe

Supplying and fixing air vessel made of 250 mm dia, 8 mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and paintingwith synthetic enamel paint of approved shade as required

Pressure Switch(PS) Supplying and installing pressure switch with 12/15 mm dia isolation valve, G.I. nipple, elbow, etc complete as per specification no. FF-FFA/PS

25mm Air release valve as per IS:14845 ISI Marked

Supply, Installation testing and commissioning of approved make heavy tubes (Class 'C') confirming to as per IS1239 Part- I (25mm Nominal bore 4.05mm thick@ 2.97 Kg/m, 32mm Nominal bore 4.05mm thick@ 3.84 Kg/m, 40mm Nominal bore 4.05mm thick@ 4.43 Kg/m,50mm Nominal bore 4.47mm thick@ 6.17 Kg/m, 65mm Nominal bore 4.47mm thick @ 7.90 Kg/m, 80mm Nominal bore 4.85mm thick @ 10.10 Kg/m,1OOmm Nominal bore5.40mm thick@ 14.40 Kg/m,150mm Nominal bore 5.40mm thick@ 21. 20 Kg/m, Such as Tees elbows check nuts unions, Flanger, Nipples etc. including cutting welding, Trending fixing on walls, ceiling (Using 41-Tech pipe/M.S.angle supports work includes two coats of metal primer and two coats of Red enamel paint etc. including cost of materials, labour, HOM complete as per specifications. Galvanized Iron pipe 150 mm dia

Supply, Installation testing and commissioning of approved make heavy tubes (Class 'C') confirming to as per IS1239 Part- I (25mm Nominal bore 4.05mm thick@ 2.97 Kg/m, 32mm Nominal bore 4.05mm thick@ 3.84 Kg/m, 40mm Nominal bore 4.05mm thick@ 4.43 Kg/m,50mm Nominal bore 4.47mm thick@ 6.17 Kg/m, 65mm Nominal bore 4.47mm thick @ 7.90 Kg/m, 80mm Nominal bore 4.85mm thick @ 10.10 Kg/m,1OOmm Nominal bore5.40mm thick@ 14.40 Kg/m,150mm Nominal bore 5.40mm thick@ 21. 20 Kg/m, Such as Tees elbows check nuts unions, Flanger, Nipples etc. including cutting welding, Trending fixing on walls, ceiling (Using 41-Tech pipe/M.S.angle supports work includes two coats of metal primer and two coats of Red enamel paint etc. including cost of materials, labour, HOM complete as per specifications. Galvanized Iron pipe 100 mm dia

Supply, Installation testing and commissioning of approved make heavy tubes (Class 'C') confirming to as per IS1239 Part- I (25mm Nominal bore 4.05mm thick@ 2.97 Kg/m, 32mm Nominal bore 4.05mm thick@ 3.84 Kg/m, 40mm Nominal bore 4.05mm thick@ 4.43 Kg/m,50mm Nominal bore 4.47mm thick@ 6.17 Kg/m, 65mm Nominal bore 4.47mm thick @ 7.90 Kg/m, 80mm Nominal bore 4.85mm thick @ 10.10 Kg/m,1OOmm Nominal bore5.40mm thick@ 14.40 Kg/m,150mm Nominal bore 5.40mm thick@ 21. 20 Kg/m, Such as Tees elbows check nuts unions, Flanger, Nipples etc. including cutting welding, Trending fixing on walls, ceiling (Using 41-Tech pipe/M.S.angle supports work includes two coats of metal primer and two coats of Red enamel paint etc. including cost of materials, labour, HOM complete as per specifications. Galvanized Iron pipe 80 mm dia

Supply, Installation testing and commissioning of approved make heavy tubes (Class 'C') confirming to as per IS1239 Part- I (25mm Nominal bore 4.05mm thick@ 2.97 Kg/m, 32mm Nominal bore 4.05mm thick@ 3.84 Kg/m, 40mm Nominal bore 4.05mm thick@ 4.43 Kg/m,50mm Nominal bore 4.47mm thick@ 6.17 Kg/m, 65mm Nominal bore 4.47mm thick @ 7.90 Kg/m, 80mm Nominal bore 4.85mm thick @ 10.10 Kg/m,1OOmm Nominal bore5.40mm thick@ 14.40 Kg/m,150mm Nominal bore 5.40mm thick@ 21. 20 Kg/m, Such as Tees elbows check nuts unions, Flanger, Nipples etc. including cutting welding, Trending fixing on walls, ceiling (Using 41-Tech pipe/M.S.angle supports work includes two coats of metal primer and two coats of Red enamel paint etc. including cost of materials, labour, HOM complete as per specifications. Galvanized Iron pipe 65 mm dia

Supply, Installation testing and commissioning of approved make heavy tubes (Class 'C') confirming to as per IS1239 Part- I (25mm Nominal bore 4.05mm thick@ 2.97 Kg/m, 32mm Nominal bore 4.05mm thick@ 3.84 Kg/m, 40mm Nominal bore 4.05mm thick@ 4.43 Kg/m,50mm Nominal bore 4.47mm thick@ 6.17 Kg/m, 65mm Nominal bore 4.47mm thick @ 7.90 Kg/m, 80mm Nominal bore 4.85mm thick @ 10.10 Kg/m,1OOmm Nominal bore5.40mm thick@ 14.40 Kg/m,150mm Nominal bore 5.40mm thick@ 21. 20 Kg/m, Such as Tees elbows check nuts unions, Flanger, Nipples etc. including cutting welding, Trending fixing on walls, ceiling (Using 41-Tech pipe/M.S.angle supports work includes two coats of metal primer and two coats of Red enamel paint etc. including cost of materials, labour, HOM complete as per specifications. Galvanized Iron pipe 50 mm dia

Supply, Installation testing and commissioning of approved make heavy tubes (Class 'C') confirming to as per IS1239 Part- I (25mm Nominal bore 4.05mm thick@ 2.97 Kg/m, 32mm Nominal bore 4.05mm thick@ 3.84 Kg/m, 40mm Nominal bore 4.05mm thick@ 4.43 Kg/m,50mm Nominal bore 4.47mm thick@ 6.17 Kg/m, 65mm Nominal bore 4.47mm thick @ 7.90 Kg/m, 80mm Nominal bore 4.85mm thick @ 10.10 Kg/m,1OOmm Nominal bore5.40mm thick@ 14.40 Kg/m,150mm Nominal bore 5.40mm thick@ 21. 20 Kg/m, Such as Tees elbows check nuts unions, Flanger, Nipples etc. including cutting welding, Trending fixing on walls, ceiling (Using 41-Tech pipe/M.S.angle supports work includes two coats of metal primer and two coats of Red enamel paint etc. including cost of materials, labour, HOM complete as per specifications. Galvanized Iron pipe 40 mm dia

Supply, Installation testing and commissioning of approved make heavy tubes (Class 'C') confirming to as per IS1239 Part- I (25mm Nominal bore 4.05mm thick@ 2.97 Kg/m, 32mm Nominal bore 4.05mm thick@ 3.84 Kg/m, 40mm Nominal bore 4.05mm thick@ 4.43 Kg/m,50mm Nominal bore 4.47mm thick@ 6.17 Kg/m, 65mm Nominal bore 4.47mm thick @ 7.90 Kg/m, 80mm Nominal bore 4.85mm thick @ 10.10 Kg/m,1OOmm Nominal bore5.40mm thick@ 14.40 Kg/m,150mm Nominal bore 5.40mm thick@ 21. 20 Kg/m, Such as Tees elbows check nuts unions, Flanger, Nipples etc. including cutting welding, Trending fixing on walls, ceiling (Using 41-Tech pipe/M.S.angle supports work includes two coats of metal primer and two coats of Red enamel paint etc. including cost of materials, labour, HOM complete as per specifications. Galvanized Iron pipe 32 mm dia

Supply, Installation testing and commissioning of approved make heavy tubes (Class 'C') confirming to as per IS1239 Part- I (25mm Nominal bore 4.05mm thick@ 2.97 Kg/m, 32mm Nominal bore 4.05mm thick@ 3.84 Kg/m, 40mm Nominal bore 4.05mm thick@ 4.43 Kg/m,50mm Nominal bore 4.47mm thick@ 6.17 Kg/m, 65mm Nominal bore 4.47mm thick @ 7.90 Kg/m, 80mm Nominal bore 4.85mm thick @ 10.10 Kg/m,1OOmm Nominal bore5.40mm thick@ 14.40 Kg/m,150mm Nominal bore 5.40mm thick@ 21. 20 Kg/m, Such as Tees elbows check nuts unions, Flanger, Nipples etc. including cutting welding, Trending fixing on walls, ceiling (Using 41-Tech pipe/M.S.angle supports work includes two coats of metal primer and two coats of Red enamel paint etc. including cost of materials, labour, HOM complete as per specifications. Galvanized Iron pipe 25 mm dia

Supply, Installation testing and commissioning of approved make heavy tubes (Class 'C') confirming to as per IS1239 Part- I (25mm Nominal bore 4.05mm thick@ 2.97 Kg/m, 32mm Nominal bore 4.05mm thick@ 3.84 Kg/m, 40mm Nominal bore 4.05mm thick@ 4.43 Kg/m,50mm Nominal bore 4.47mm thick@ 6.17 Kg/m, 65mm Nominal bore 4.47mm thick @ 7.90 Kg/m, 80mm Nominal bore 4.85mm thick @ 10.10 Kg/m,1OOmm Nominal bore5.40mm thick@ 14.40 Kg/m,150mm Nominal bore5.40mm thick@ 21. 20 Kg/m, Such as Tees elbows check nuts unions, Flanger, Nipples etc. including cutting welding, Trending fixing on walls, ceiling (Using 41-Tech pipe/M.S.angle supports work includes two coats of metal primer and two coats of Red enamel paint etc. including cost of materials, labour, HOM complete as per specifications Galvanized Iron pipe 150 mm dia

Supply, Installation testing and commissioning of approved make heavy tubes (Class 'C') confirming to as per IS1239 Part- I (25mm Nominal bore 4.05mm thick@ 2.97 Kg/m, 32mm Nominal bore 4.05mm thick@ 3.84 Kg/m, 40mm Nominal bore 4.05mm thick@ 4.43 Kg/m,50mm Nominal bore 4.47mm thick@ 6.17 Kg/m, 65mm Nominal bore 4.47mm thick @ 7.90 Kg/m, 80mm Nominal bore 4.85mm thick @ 10.10 Kg/m,1OOmm Nominal bore5.40mm thick@ 14.40 Kg/m,150mm Nominal bore5.40mm thick@ 21. 20 Kg/m, Such as Tees elbows check nuts unions, Flanger, Nipples etc. including cutting welding, Trending fixing on walls, ceiling (Using 41-Tech pipe/M.S.angle supports work includes two coats of metal primer and two coats of Red enamel paint etc. including cost of materials, labour, HOM complete as per specifications Galvanized Iron pipe 100 mm dia

Supplying Installing, testing and commissioning of approved make15mm dia sprinkler bulb pendent/wall mounted type designed to operate68 degrees centegrad Make Tyco/HD FIRE complete (Colour code of bulb liquid inside Glass bulb type Pendents As per IS 9972: 5JOC- Orange,68°C- Red, 79°C -Yellow, 93°C- Green, 141oc - Blue, 182°C - Mauve,227/260°C - Black) including cost of materials, labour, HOM complete as per specifications:- Standard Spray (Upright Type)

Supplying Installing, testing and commissioning of approved make15mm dia sprinkler bulb pendent/wall mounted type designed to operate68 degrees centegrad Make Tyco/HD FIRE complete (Colour code of bulb liquid inside Glass bulb type Pendents As per IS 9972: 5JOC- Orange,68°C- Red, 79°C -Yellow, 93°C- Green, 141oc - Blue, 182°C - Mauve,227/260°C - Black) including cost of materials, labour, HOM complete as per specifications:- Standard Spray (Pendant Type)

Supply, installation, Testing and Commissioning of FM 200 Firesuppression System for DATA CENTER-- 100lit. Seamless Cylinder CCOE Approved, complete with valve assembly arrangement for supervisory switch connection, 24 V solenoid valves, monitoring cylinder pressure, a pressure gauge with a safety burst disc & a safety cap. The vendor shall consider the necessary (if required) interface modules, integrators etc and all module necessary for successful operation and BMS integration of the complete system even if not specified in the BOQ.with FM-200 Gas. Master / Slave cylinder kit with all necessary accessories like electrical control head (solenoid valve), manual actuator, flexible discharge hose, master cylinder adapter, Manifold with check valve,Discharge Nozzles, filed with HFC27ea agent, Bleed valve are designed to provide the proper flow rate & distribution of FM - 200 to total flood a hazard area: 180 deg. / 360 deg. Non Return Valve,Cylinder Straps, Discharge Pressure Switch ( Local) SEAMLESS PIPING: Supply and laying of High quality Seamless pipe schedule 40 with heavy duty socket type fittings and brackets of the following sizes. The Pipe will be duly painted with primer & enamel paint. etc.--Abort Switch --Release Switch--Gas Release Panel --FM-200 SYSTEM--DISCHARGE NOZZLE ,Nos 12--100 LTR Gas Cylinder with all Accessories, Nos 3--EXTINGUISHING CONTROL PANEL, Nos 2--PRESSURE SWITCH, Nos 2--ALARM BELL, Nos 2--HORN / STROBE, Nos 2--SMOKE DETECTOR, Nos 2

Supplying and erecting ABC Dry Chemical Powder type Fire extinguisher 4 kg capacity cartridge tyB with gun metal cap 150 gram CO2 gas cartridge powder and brackets conforming to IS 2171-1985 and complete erected with necessary clamps made from 50x6mm MS flat with nuts and bolts grouted in wall complete

Providing 4.5Kg C0 Wheel Type2 Providing 4.5Kg C02 gas valve type Fire Extinugisher, Tro lley Mounted, Easy Weight Management used Unused Mechanism, Gross Weight 19.1 Kg. empty Weight 14.6 Kg. Can Height 860MMDiameter 140MM, Discharge Time less than13 Sees, Controllable discharge mechanism, Applicable on Class 8&C Fire, 8 Rating 138, Can Constuction : Hot spinning/Forging, Valve Construction : Forging& Machining, Internal Coating of Can : Not Applicable, External coatingof Can : Spray Painting, Sheet metal thickness : 4.5M M lSI Approved,1 YearWarranty.with instalert system with Superior quality EPDM Rubber Hosepipe etc., including cost of materials, labour, HOM complete as per specifications

Supply installation, testing and commissioning of fire alarm Main panel with zone indication alaram etc. as required including cost of materials, labour, HOM complete as per specifications

Supplying, installation, testing and commissioning of Electric driven Main Fire Pump (Sprinkler and Hydrant) suitable for automaticoperation and consisting of following, complete in allrespects, as required :(a) Horizontal type, multistage, centrifugal, split casingpump of cast iron body & bronze impeller with stainlesssteel shaft, mechanical seal conforming to IS 1520.(b) Suitable HP Squirrel cage induction motor, TEFC,synchronous speed 1500 RPM, suitable for operationon 415 volts, 3 phase 50 Hz, AC supply with IP 55protection for enclosure, horizontal foot mounted typewith Class-'F' insulation, conforming to IS-325.(c) M.S. fabricated Common base plate, coupling, couplingguard, foundation bolts etc. as required.(d) Suitable cement concrete foundation duly plasteredwith anti vibration pads.--2280 lpm at 70 m Head

Electric driven terrace pump suitable for automaticoperation and consisting of following, complete in allrespects, as required: (jocki Pump)(a) Horizontal type, multistage, centrifuga pump of cast iron body & bronze impeller with stainlesssteel shaft, mechanical confirming to IS : 1520b) Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase, 50 Hz, ACsupply with IP55 class of protection for enclosure, horiziontal foot mounted type with Class-'F' insulation,conforming to IS-325.(c) M.S.fabricated common base plate, coupling, coupling guard, foundation bolts etc.as required. (d) Suitable cement concrete foundation duly plastered and with anti vibration pads.--180 lpm at 70 m Head

Supplying, installation, testing and commissioning ofelectric driven terrace pump suitable for automaticoperation and consisting of following, complete in allrespects, as required: (Terrace Pump)(a) Horizontal type, multistage, centrifugal, split casingpump of cast iron body & bronze impeller with stainlesssteel shaft, mechanical confirming to IS : 1520b) Suitable HP squirell cage induction motor TEFC typesuitable for operation on 415 volts, 3 phase, 50 Hz, ACsupply with IP55 class of protection forenclosure, horiziontal foot mounted type with Class-'F' insulation,conforming to IS-325.(c) M.S.fabricated common base plate, coupling, couplingguard, foundation bolts etc.as required. (d) Suitablecement concrete foundation duly plasteredand with anti vibration pads.--900 lpm at 35 m Head

Supplying, installation, testing & commissioning of Intelligent Addressable type multisensor detector (Photo + Fixed Tempt. + Rate of Rise Tempt.) with base for use as heat or smoke or combined both automatic electronic addressing, microprocessor type with built in integrated short circuit isolator with operating tempurature from -20⁰C to + 60⁰C. Detector shall have auto learn, drift compensation etc. As per tender specification

Supplying, installation, testing & commissioning of response indicator on surface/recessed MS Box having two LED, metallic cover complete with all connections etc as required

Supply, installation, testing & commissioning of Intelligent Addressable Control module with IP66 casing containing four relay outputs, each containing a potential-free DPDT contact with a fail-safe and in-built short circuit isolator The ambient temperature range shall be -20C to +60C

Supply, installation, testing & commissioning of Intelligent Addressable break glass type Manual Call Point having inbuilt short circuit isolator & LED indicator with back box

Intelligent Addressable loop powered Sounder having integrated short circuit isolator. It shall not required separate interface module/ power cable

Intelligent Addressable loop powered flasher having integrated short circuit isolator. It shall not required separate interface module/ power cable

Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath complete as required

Intelligent Addressable loop powered Flasher having integrated short circuit isolator. It shall not required separate interface module/ power cable

Supply, Installation, Testing & Commisioning of modular type Variable Refrigerant Volume Air Cooled Outdoor Units suitable for cooling and heating, having all hermetically sealed inverter type scroll compressor, minimum two compressors for above 14HP modules , microprocessor based controller , top discharge type condensing units , with R 410A refrigerant , vibration isolators with suitable foundation etc. complete as required. The unit shall deliver the rated capacity at AHRI Conditions & work even at 50 ° C ambient temperature without tripping. The unit shall be suitable to work on 400V +/- 10%, 3 Phase, 50Hz AC power supply. The unit shall be filled with first charge of refrigerant and ready for use as required. The COP at AHRI conditions shall not be less than 3.1 and EER not less than 6.5.:-12 HP outdoor unit

Supply, Installation, Testing & Commisioning of modular type Variable Refrigerant Volume Air Cooled Outdoor Units suitable for cooling and heating, having all hermetically sealed inverter type scroll compressor, minimum two compressors for above 14HP modules , microprocessor based controller , top discharge type condensing units , with R 410A refrigerant , vibration isolators with suitable foundation etc. complete as required. The unit shall deliver the rated capacity at AHRI Conditions & work even at 50 ° C ambient temperature without tripping. The unit shall be suitable to work on 400V +/- 10%, 3 Phase, 50Hz AC power supply. The unit shall be filled with first charge of refrigerant and ready for use as required. The COP at AHRI conditions shall not be less than 3.1 and EER not less than 6.5.:-14 HP outdoor unit

Supply, Installation, Testing & Commisioning of modular type Variable Refrigerant Volume Air Cooled Outdoor Units suitable for cooling and heating, having all hermetically sealed inverter type scroll compressor, minimum two compressors for above 14HP modules , microprocessor based controller , top discharge type condensing units , with R 410A refrigerant , vibration isolators with suitable foundation etc. complete as required. The unit shall deliver the rated capacity at AHRI Conditions & work even at 50 ° C ambient temperature without tripping. The unit shall be suitable to work on 400V +/- 10%, 3 Phase, 50Hz AC power supply. The unit shall be filled with first charge of refrigerant and ready for use as required. The COP at AHRI conditions shall not be less than 3.1 and EER not less than 6.5.:-16 HP outdoor unit

Supply, Installation, Testing & Commisioning of modular type Variable Refrigerant Volume Air Cooled Outdoor Units suitable for cooling and heating, having all hermetically sealed inverter type scroll compressor, minimum two compressors for above 14HP modules , microprocessor based controller , top discharge type condensing units , with R 410A refrigerant , vibration isolators with suitable foundation etc. complete as required. The unit shall deliver the rated capacity at AHRI Conditions & work even at 50 ° C ambient temperature without tripping. The unit shall be suitable to work on 400V +/- 10%, 3 Phase, 50Hz AC power supply. The unit shall be filled with first charge of refrigerant and ready for use as required. The COP at AHRI conditions shall not be less than 3.1 and EER not less than 6.5.:-20 HP outdoor unit

Supply,installation,testing andcommissioning of following minimum capacity 4 way flow VRV/VRF Cassette Type Indoor ceiling mounted unit equipped with synthetic washable media pre-filter, fan section with low noise fan/dynamically balanced blower,multi speed motor, coil section with DX Copper coil, electronic expansion valve,outer cabinet, drain pump,grill, necessary supports, vibration isolation, cordless remote controletc.,suitable for operation on single phase 230V±10%, 50HzAC supply, complete, as required.The units shall have automatic force shutdown provision in case of fire on receiving signal from BMS System. The cooling capacity of indoor unit will be at air inlet conditions of 27Degree C DB and 19 Degree C WB temperature:-3.2 TR

Supply,installation,testing andcommissioning of following minimum capacity 4 way flow VRV/VRF Cassette Type Indoor ceiling mounted unit equipped with synthetic washable media pre-filter, fan section with low noise fan/dynamically balanced blower,multi speed motor, coil section with DX Copper coil, electronic expansion valve,outer cabinet, drain pump,grill, necessary supports, vibration isolation, cordless remote controletc.,suitable for operation on single phase 230V±10%, 50HzAC supply, complete, as required.The units shall have automatic force shutdown provision in case of fire on receiving signal from BMS System. The cooling capacity of indoor unit will be at air inlet conditions of 27Degree C DB and 19 Degree C WB temperature:-2.4 TR

Supply,installation,testing andcommissioning of following minimum capacity 4 way flow VRV/VRF Cassette Type Indoor ceiling mounted unit equipped with synthetic washable media pre-filter, fan section with low noise fan/dynamically balanced blower,multi speed motor, coil section with DX Copper coil, electronic expansion valve,outer cabinet, drain pump,grill, necessary supports, vibration isolation, cordless remote controletc.,suitable for operation on single phase 230V±10%, 50HzAC supply, complete, as required.The units shall have automatic force shutdown provision in case of fire on receiving signal from BMS System. The cooling capacity of indoor unit will be at air inlet conditions of 27Degree C DB and 19 Degree C WB temperature:-2 TR

Supply,installation,testing andcommissioning of following minimum capacity 4 way flow VRV/VRF Cassette Type Indoor ceiling mounted unit equipped with synthetic washable media pre-filter, fan section with low noise fan/dynamically balanced blower,multi speed motor, coil section with DX Copper coil, electronic expansion valve,outer cabinet, drain pump,grill, necessary supports, vibration isolation, cordless remote controletc.,suitable for operation on single phase 230V±10%, 50HzAC supply, complete, as required.The units shall have automatic force shutdown provision in case of fire on receiving signal from BMS System. The cooling capacity of indoor unit will be at air inlet conditions of 27Degree C DB and 19 Degree C WB temperature:-1.6 TR

Supply,installation,testing andcommissioning of following minimum capacity 4 way flow VRV/VRF Cassette Type Indoor ceiling mounted unit equipped with synthetic washable media pre-filter, fan section with low noise fan/dynamically balanced blower,multi speed motor, coil section with DX Copper coil, electronic expansion valve,outer cabinet, drain pump,grill, necessary supports, vibration isolation, cordless remote controletc.,suitable for operation on single phase 230V±10%, 50HzAC supply, complete, as required.The units shall have automatic force shutdown provision in case of fire on receiving signal from BMS System. The cooling capacity of indoor unit will be at air inlet conditions of 27Degree C DB and 19 Degree C WB temperature:-1.25 TR

Supply,installation,testing andcommissioning of following minimum capacity 4 way flow VRV/VRF Cassette Type Indoor ceiling mounted unit equipped with synthetic washable media pre-filter, fan section with low noise fan/dynamically balanced blower,multi speed motor, coil section with DX Copper coil, electronic expansion valve,outer cabinet, drain pump,grill, necessary supports, vibration isolation, cordless remote controletc.,suitable for operation on single phase 230V±10%, 50HzAC supply, complete, as required.The units shall have automatic force shutdown provision in case of fire on receiving signal from BMS System. The cooling capacity of indoor unit will be at air inlet conditions of 27Degree C DB and 19 Degree C WB temperature:-1 TR

Supply, installation, testing and commissioning of micro processor based, Precision Air Conditioning Unit comprising Indoor & outdoor units interconnected with refrigerant piping. The indoor evaporator unit, shall be BOTTOM discharge. The fan section should be below false floor to provide high power savings compared to fans inside the cabinet. The fans should be mounted in a separate cabinet and the cabinet should be located under the false floor. The Indoor fan shall be with centrifugal blowers with latest innovative EC fan technology with “COMPOSITE Blade material ",and other accessories,in all respect. 95% down to 5 micron filters with filter section & minimum 4 row deep slant type copper cooling DX-coil with aluminium fins, SS drain tray duly insulated, high technology fixed speed scroll compressor suitable for R407C refrigerant, Compressor refrigerant circuit (Two compressors with Independent Circuits) shall have vibration absorbers at suction & discharge lines, with strip type reheater & steam electrode humidifier. Compressor EER should not be less then 11.1 Btuh / Watt (COP not less then 3.25 at ARI conditions), electronic expansion valve & electrical control panel, all inside a cabinet. The Indoor cabinet shall be with double skin side panels & front & back panels shall be with 25mm thick accoustic mineral wool insulation. The outdoor air cooled condensing unit shall be oversized to handle high ambient conditions. Condenser shall have copper condensing coil with aluminium fins. The outdoor condenser shall have EC fans which will vary speed depending upon ambient temperature and suitable for vertical or horizontal hot air discharge as per the site conditions. Separate condenser unit shall be provided for each refrigerant circuit.Condensers with AC fan motors are strictly not accepted as EC fan motors are more efficient than AC fan motors.The condenser unit shall suitably design for noise level ≤ 75 dB at a distance of 1 meter away from outdoor unit.The outdoor condenser must be provided with Electronically commutated motors which must include micro-controller with option to set ambient temperatures / system pressure etc. The logic of operation of EC motor must be to maintain a constant discharge pressure in the circuit irrespective of ambient temperatures.The Condenser unit shall be suitable for round-the-clock operation.The body of the condenser unit shall be made out of 16 SWG (1.6mm) corrosion resistant G.I. Sheet. The entire stand shall be supported by epoxy coated frame. The condensers should have anti-corrossive coating from factory. The indoor unit shall also have heater.The external static pressure of fan shall not be less than 10mm Wg. The controller of the unit shall be intelligent. The controller shall also have auto sequential operation of Precision Air Conditioning Units. PAC shall have atleast two dry contacts for remote alarms. The quoted price shall be inclusive of interconnected insulated refrigerant piping, insulated drain piping with in the room & from each machine, vibration isolation pads and associated electrical & control cabling between indoor & outdoor units and MS base frame / MS Platform duly painted with black enamel paint for mounting of condensing units and suitable vibration isolation pads.( Each unit should have a inbuilt card for Bacnet/Modbus output for BMS monitoring).The Unit shall be with Fixed scroll Compressor with refrigerent circuit The unit shall be suitable for 380-415 Volts / 50HZ /3 Phase supply.Note: 1. The refrigerant piping of copper duly insulated with 13/19mm thick nitrile rubber class "O" having K value as 0.032 W/ m Deg. K-- 2. Units shall also be suitable to deliver the desired capacity after deration for such a distance of piping. deration for such a distance of piping.--3. Bidder to include suitable size (dia) extra length of piping in the BOQ along with kit (solenoid valve, NRV, extra oil charge & extra refrigerant charge.--4. Water connection shall be provided at one point with in 5m in the room. The entire onward piping upto the machines shall be done by other agency.--5. Drain piping with insulation and connection upto 10 M the nearest drain point in the room shall be included. The drain piping shall be of 50mm dia pvc duly insulated with 9mm thick nitrile rubber.--6. The interconnecting copper conductor control & power cabling with earthing between indoor & outdoor units of adequate size & quantity to be considered along with GI cable tray.--7. The incoming copper cabling along with earhting from the indoor isolator to AC unit shall also be accounted for in the scope of work.--8. Oudoor Unit's power isolator in weather proof IP66 Plastic enclosure mounted on the outdoor unit it self for power ON/OFF to outdoor.--12. Nitrogen testing, vaccumising and testing and commissioning of the unit complete in all respect.--13. Each unit should have a inbuilt card for Bacnet/Modbus output for BMS monitoring.--14. The unit shall have water leak detection sensing tape with alarm initiation system, on detection of water leakage under the machine in the vicinity.--15. The unit shall have a feature to trip off automaticaly in the event of receiving a fire signal from the fire detection system. The necessary cabling between the fire relay control module with in the space/room and the unit's controller shall be considered.7.5 TR actual capacity (3000 CFM), Floor Discharge Type Precision AC Units for Data centre. (2W + 1S) at 45°C outdoor temperature.Inside design conditions Cold Aisle Condition = 20 +/- 1⁰C---[The cost of (a). Installation, Testing & Commissioning charges for complete Precision Air Conditioning Unit & (b) Handling & Poisitioning of units at site (Without Crane) to be included in the quoted price ADVANCED AIR TERMINAL DISTRIBUTION (Supply Air modulator Grilles) COMPRISING OF : ( 2.a)Top Cover, GI Powder Coated with perforations to deliver airflow , with aerofoil aluminium damper , suitable to take the load of the rack upto 800kgs per tile of size 595mmX595mm, provision for fitment and operation of microprocessor controller with display. (Make : Airmaster / Ravistar / Stulz) nos- 12--(2 .b)Actuator to modulate the vanes from 0 to 100% to take feed back from the sensors. (Make : Danfoss / Belimo) nos- 3--(2.c)Microprocessor controller or PLC based interface with programmable control logic protocol , including two sensors to modulate the airflow from 0 to 100% based on the rack temperature and regulating the right amount of air volume. The average of both sensors to be input for actual conditions to the control logic. Display to be setable for temperature, communication on modbus to be available. (Make : Omron / Mitsubishi / Stulz) nos-3Supply, Installation, testing and commissioning including vaccumiazation and Nitrogen testing of following nominal sizes of soft/hard drawn copper refrigerant piping for VRV/VRF system, complete with fittings, with suitable adjustable ring type hanger supports, jointing/brazing including accessories, insulated with XPLE Class-O tubular insulation/with Class-O closed cell elastometric nitrile rubber tubular sleeves sections of specified thickness as given below for Suction and Liquid lines, all accessories as per specifications etc. as required

SUCTION LINE:-28.58 mm dia (OD) (Soft drawn)with tube thickness 1.2 mm with 19 mm thick insulation

SUCTION LINE:-22.2 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19mm thick insulation

SUCTION LINE Supply and laying :- 19 mm dia (OD) (Soft drawn)with tube thickness 1.2 mm with 19mm thick insulation complete in all respect

SUCTION LINE Supply and laying:- 15.86 mm dia (OD) (Soft drawn)with tube thickness 1.2 mm with 19mm thick insulation complete in all respect

LIQUID LINE Supply and laying:- 12.7 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation complete in all respect

LIQUID LINE Supply and laying:- 19.5 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation complete in all respect

LIQUID LINE Supply and laying:- 6.4 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation complete in all respect

CABLE TRAY:- Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required:- 450 mm width X 50 mm depth X 2.0 mm thickness

CABLE TRAY:- Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required:- 300 mm width X 50 mm depth X 1.6 mm

CABLE TRAY:- Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required:- 200 mm width X 50 mm depth X 1.6 mm thickness

Supply, installation, balancing and commissioning of factory fabricated GSS sheet metal rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required.Thickness 0.63 mm sheet (24 gauge)

Supply, installation, testing and commissioning of copper conductor 2C*1.0 sqmm Control cabling with PVC conduit from indoor to outdoor unit

Refnets for VRV System (To be supplied by unit manufacturer) Vendor is expected to minimise no. of joints that is required for a complete installation. model no. are as follows

Supply, installation, testing and commissioning of drain piping using CPVC pipe SDR11 with CPVC fittings and insulated with 6mm thick nitrile rubber insulation finished with polished. The pipe goes below ground should be rapped with polythene sheet as follows::-50 mm Dia

Supply, installation, testing and commissioning of drain piping using CPVC pipe SDR11 with CPVC fittings and insulated with 6mm thick nitrile rubber insulation finished with polished. The pipe goes below ground should be rapped with polythene sheet as follows::-40 mm Dia

Supply, installation, testing and commissioning of drain piping using CPVC pipe SDR11 with CPVC fittings and insulated with 6mm thick nitrile rubber insulation finished with polished. The pipe goes below ground should be rapped with polythene sheet as follows::-32 mm Dia

Supply, fabrication and installation of MS base frame for outdoor units complete with 2 coat of epoxy painting, vibration isolation pads, supports, hangers, railing, brackets etc. For construction Construction as approved by Architect/ Consultant. Apply 2 coats of epoxy primer 2 coats of epoxy paint and finish painting as approved by Architect. Stand to be made as per site conditions

Supply, installation, testing and commissioning of flexible duct 50 mm dia

Supply, installation, testing and commissioning of the cabinet type centrifugal fans with backward curved inclined type heavy duty class with IP 55 protection and class F insulation complete with base frame to mount fan motor with adjusting brackets, vibration spring isolators, canvas connection and epoxy painted, with filter box (pre and fine filter) all as per specs. All accessories louvers, bird screen, Mounting racket, Stand or Hanging arrangement & electrical cable connection necessary for Fan Units are included. it shoul be AMCA certified:-3000 CFM fan, 30 mm static

Supply, installation, testing and commissioning of the cabinet type centrifugal fans with backward curved inclined type heavy duty class with IP 55 protection and class F insulation complete with base frame to mount fan motor with adjusting brackets, vibration spring isolators, canvas connection and epoxy painted, with filter box (pre and fine filter) all as per specs. All accessories louvers, bird screen, Mounting racket, Stand or Hanging arrangement & electrical cable connection necessary for Fan Units are included. it shoul be AMCA certified:-2000 CFM fan, 30 mm static

Supply, installation, testing and commissioning of GI volumecontrol duct damper complete with neoprene rubber gaskets,nuts, bolts, screws linkages, flanges etc, as per specifications.

Supplying, Fixing,testing and commissioning of fire dampers in supply air duct/main branch and return air path as and where required of required sizes i/c control wiring,the damper shall be motorized and spring return so as to close the damper in the event of power failure automatically and open the same in case of power being restored. The spring return action shall be inbuilt mechanism and not externally mounted. The damper shall also be closed in the event of fire signal complete asrequired and as per specifications.--- Fire damper

Supply and Installation, testing, commissioning of Underdeck Insulation with 25 mm thk Fire retardant Glass wool rigid board covered with R P tissue paper & 30 mm gauge perforated aluminium cladding , density 80 kg/cum sheet all joints for fixing and GI screws

Supply and Installation, testing, commissioning of Propeller type wall mounted Exhaust fan with louver, cowl and bird screen on outside:- 100 CFM.

Supply and Installation, testing, commissioning of Propeller type wall mounted Exhaust fan with louver, cowl and bird screen on outside:- 300 CFM.

Supply and Installation, testing, commissioning of Propeller type wall mounted Exhaust fan with louver, cowl and bird screen on outside:- 800 CFM.

Providing and fixing Hand shower (health faucet) with 8mm dia. 1m long flexible tube having wall hook with approved make including necessary sockets/ union nut etc. complete as directed by Engineer in charge. Supplying and fixing of UPVC WC connector (straight or bend type) with rubber lip ring. Including 110 mm dia UPVC pipe of required length and proper connection complete as required.

Supplying and fixing of UPVC WC connector (straight or bend type) with rubber lip ring. Including 110 mm dia UPVC pipe of required length and proper connection complete as required.

Supplying & Fixing in position 100 mm dia UPVC Multi traps of self cleaning design including 125 mm dia brass C.P. grating, jointing, embedding in concrete etc. complete. Rate to include making of opening in floor, marble / tiles, for fixing C.P gratings ( suitable for pipes)

Supplying and fixing of in position Urinal partition of white glazed vitreous china including cutting and making good the wall where required, including brackets, complete. as per specification and directed by Engineer in charge

Providing and fixing to wall, ceiling and floor unplasticised PVC pipes 10.00 kgs/sqcm working pressure of outside diameter chemp plast I Wavin or equivalent make with pipe fittings, wall clips, making good the wall, ceiling and floor, including cost of all materials, labour charges, HOM and testing complete as per specifications:-25 mm dia

Providing and fixing to wall, ceiling and floor unplasticised PVC pipes 10.00 kgs/sqcm working pressure of outside diameter chemp plast I Wavin or equivalent make with pipe fittings, wall clips, making good the wall, ceiling and floor, including cost of all materials, labour charges, HOM and testing complete as per specifications:-32 mm dia

Providing and fixing to wall, ceiling and floor unplasticised PVC pipes 10.00 kgs/sqcm working pressure of outside diameter chemp plast I Wavin or equivalent make with pipe fittings, wall clips, making good the wall, ceiling and floor, including cost of all materials, labour charges, HOM and testing complete as per specifications:-40 mm dia

Providing and fixing to wall, ceiling and floor unplasticised PVC pipes 10.00 kgs/sqcm working pressure of outside diameter chemp plast I Wavin or equivalent make with pipe fittings, wall clips, making good the wall, ceiling and floor, including cost of all materials, labour charges, HOM and testing complete as per specifications:-50 mm dia

Providing and fixing to wall, ceiling and floor unplasticised PVC pipes 10.00 kgs/sqcm working pressure of outside diameter chemp plast I Wavin or equivalent make with pipe fittings, wall clips, making good the wall, ceiling and floor, including cost of all materials, labour charges, HOM and testing complete as per specifications:-65 mm dia

Providing and fixing to wall, ceiling and floor unplasticised PVC pipes 10.00 kgs/sqcm working pressure of outside diameter chemp plast I Wavin or equivalent make with pipe fittings, wall clips, making good the wall, ceiling and floor, including cost of all materials, labour charges, HOM and testing complete as per specifications:-75 mm dia

Providing and fixing to wall, ceiling and floor unplasticized PVC 6.00 kgs/sq. cm working pressure with pipe fittings, wall clips etc., and making good the wall, ceiling and floor for sanitary pipelines including cost of all materials, labour charges, HOM and testing complete as per specifications:-110 MM dia

Providing and fixing to wall, ceiling and floor unplasticized PVC 6.00 kgs/sq. cm working pressure with pipe fittings, wall clips etc., and making good the wall, ceiling and floor for sanitary pipelines including cost of all materials, labour charges, HOM and testing complete as per specifications:-160 MM dia

Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete

Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms

Supplying and fixing of fully automatic ss "No Touch" Hand drier suitable to operate on 230 volts, single phase 50 Hz, A.C. power supply and directly plugged to power point complete.

Providing and fixing Cleanout plug as per design:- 75 mm dia

Providing and fixing Cleanout plug as per design:- 110 mm dia

providing and fixing including cost of all materials, labour charges, HOM and testing complete as per specifications. CI pipes 100 mm dia of 1.8m length IS 1729:-

providing and fixing including cost of all materials, labour charges, HOM and testing complete as per specifications. CI pipes 32 mm dia of 1.8m length IS 1729:- 32 mm dia nominal

Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required ::- 40 mm dia

Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required ::- 50 mm dia

Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required ::- 65 mm dia

Providing, installation, testing and commissioning of stainless steel Y-strainer fabricated out of 1.6 mm thick stainless steel, Grade 304, sheet with 3 mm dia holes with stainless steel flange:- 50 mm dia

Providing, installation, testing and commissioning of stainless steel Y-strainer fabricated out of 1.6 mm thick stainless steel, Grade 304, sheet with 3 mm dia holes with stainless steel flange:- 65 mm dia

Providing, installation, testing and commissioning of stainless steel Y-strainer fabricated out of 1.6 mm thick stainless steel, Grade 304, sheet with 3 mm dia holes with stainless steel flange:- 80 mm dia

Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts,washers etc.as required :50 mm dia

Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts,washers etc.as required :65 mm dia

Supplying and installing pressure gauge of 100 mm dia., 0-300 PSI or 0-14 kg per cm square fitted with 12/15 mm dia. pad cock valve, and G.I. pipe, elbow etc. complete as per specification no. FF-FFA/PG

Constructing masonry Chamber 60x45x50 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for water meter complete with C.I. double flap surface box 400x200x200 mm (inside) with locking arrangement and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) , i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand:10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design : 18.37.1 With common burnt clay F.P.S.(non modular) bricks of class designation 7.5

Providing and fixing with pipe fittings, support, including cost of all materials, labour charges, HOM of equipment and testing complete as per specifications:-GI pipe as par IS/1239 ISI MARKED C Class (heavy) 20 mm

Providing and fixing with pipe fittings, support, including cost of all materials, labour charges, HOM of equipment and testing complete as per specifications:-GI pipe as par IS/1239 ISI MARKED C Class (heavy) 25 mm

Providing and fixing with pipe fittings, support, including cost of all materials, labour charges, HOM of equipment and testing complete as per specifications:-GI pipe as par IS/1239 ISI MARKED C Class (heavy) 32 mm

Providing and fixing with pipe fittings, support, including cost of all materials, labour charges, HOM of equipment and testing complete as per specifications:-GI pipe as par IS/1239 ISI MARKED C Class (heavy) 40 mm

Providing and fixing with pipe fittings, support, including cost of all materials, labour charges, HOM of equipment and testing complete as per specifications:-GI pipe as par IS/1239 ISI MARKED C Class (heavy) 50 mm

Providing and fixing with pipe fittings, support, including cost of all materials, labour charges, HOM of equipment and testing complete as per specifications:-GI pipe as par IS/1239 ISI MARKED C Class (heavy) 65 mm

Providing and fixing with pipe fittings, support, including cost of all materials, labour charges, HOM of equipment and testing complete as per specifications:-GI pipe as par IS/1239 ISI MARKED C Class (heavy) 80 mm

Providing and fixing with pipe fittings, support, including cost of all materials, labour charges, HOM of equipment and testing complete as per specifications:-GI pipe as par IS/1239 ISI MARKED C Class (heavy) 100 mm

Supply, installation, testing & commissioning of submersible pumps ( 1 working+ 1standby) with . C.I body with built in strainer & SS 304 impeller, coupled to motor suitable for operation on 430 V 3 pH 50 Cycle A/C power supply and lifting arrangement including complete as required. Automatic Electric control panel with sequential change over switch, Ammeter, voltmeter, over load/under load protection with indicator lamp, single phase preventor, relays, electrical wiring, cabling from panel to pumps, level controller complete with all accessories as per manufacturer specifications. Accessories like NRV's valves on discharge and valve and strainer in suction line, header for suction and delivery side, required cut pieces of pipes, fittings, flanges, pressure gauge, base frame and concrete foundation complete as required. Flow rate : 200 LPM (1 Working +1 Standby)--Head : 40 Mts -Purpose : Water Transfer from UGT to OHT (Flushing Tank)--Location : Underground Tank (Flushing tank)

Supply, installation, testing & commissioning of submersible pumps ( 1 working+ 1standby) with . C.I body with built in strainer & SS 304 impeller, coupled to motor suitable for operation on 430 V 3 pH 50 Cycle A/C power supply and lifting arrangement including complete as required. Automatic Electric control panel with sequential change over switch, Ammeter, voltmeter, over load/under load protection with indicator lamp, single phase preventor, relays, electrical wiring, cabling from panel to pumps, level controller complete with all accessories as per manufacturer specifications. Accessories like NRV's valves on discharge and valve and strainer in suction line, header for suction and delivery side, required cut pieces of pipes, fittings, flanges, pressure gauge, base frame and concrete foundation complete as required Sump pump 150 lpm 20 m head Flow rate : 150 LPM (1 Working+ 1standby) Head : 20 MT’s Purpose : Sump pump

Supply, installation, testing & commissioning of submersible pumps ( 1 working+ 1standby) with . C.I body with built in strainer & SS 304 impeller, coupled to motor suitable for operation on 430 V 3 pH 50 Cycle A/C power supply and lifting arrangement including complete as required. Automatic Electric control panel with sequential change over switch, Ammeter, voltmeter, over load/under load protection with indicator lamp, single phase preventor, relays, electrical wiring, cabling from panel to pumps, level controller complete with all accessories as per manufacturer specifications. Accessories like NRV's valves on discharge and valve and strainer in suction line, header for suction and delivery side, required cut pieces of pipes, fittings, flanges, pressure gauge, base frame and concrete foundation complete as required Rain water harvesting tank Flow rate : 150 LPM : 40 Mtr Purpose : Water transfer Location : Rain water harvesting tank

Constructing brick masonry Catch basin internal dimensions 600x600mm, (clear inside dimension) for pipeline with three or more inlets, using table moulded non-modular bricks of class designation 50 in cement mortar 1•5, C. I cover with frame (Heavy duty)total weight of cover with frame to be not less than 125 kg R.C.C. top slab with cement concrete M 15 with 20mm and downsize granite metal , foundation concrete M 5 with 40mm and downsize granite metal inside plastering 12mm thick with cement mortar 1:3, finished smooth with a floating coat of cement on walls and bed concrete complete as per standard design including cost of materials, labour charges, curing complete as per specifications.(Depth up to 600- 1500 mm)

Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 Fine sand : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design:(19.30.2) Inside dimensions 500x700 mm and 45 cm deep for pipe line with one or two inlets :(19.30.2.1) With common burnt clay F.P.S. (non modular)bricks of class designation 7.5

Extra for depth beyond 45 cm of brick masonry chamber :(19.31.2) For 500x700 mm size (19.31.2.1 ) With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone- III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design :(1) Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg(weight of cover 23 kg and weight of frame 15 kg) :-- With Sewer bricks conforming to IS : 4885

Extra for depth for manholes : --- Size 90x80 cm---With Sewer bricks conforming to IS : 4885

Constructing brick masonry circular type manhole 0.91 m internal dia at bottom and 0.56m dia at top in cement mortar 1:4 (1 cement : 4 coarse sand), inside cement plaster 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement, foundation concrete 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size), and making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement, all complete as per standard design :(1) 0.91 m deep with S.F.R.C. cover and frame (heavy duty,HD-20 grade designation) 560 mm internal diameter conforming to I.S. 12592, total weight of cover and frame to be not less than 182 kg., fixed in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including centering, shuttering all complete.(Excavation, foot rests and 12mm thick cement plaster at the external surface shall be paid for separately) :--With Sewer bricks conforming to IS : 4885

Extra depth for circular type manhole 0.91m internal dia (at bottom) beyond 0.91 m to 1.67 m--With Sewer bricks conforming IS : 4885

Providing and installing packaged type MBBR ( Moving Bed Bio-film Reactor) based STP technology with tertiary treatment comprises of MGF (Multi Grade Filter)and ACF (Activated Carbon Filter) complete with in all respect

SITC of Electric Traction Passenger Lift with • Rated capacity :- 8 Passenger/544Kg. For Lift travelling G+4 floors at a speed of 1.0 MPs,

Supplying, installation, testing and commissioning of grid interactive roof top solar photo voltaic power generation system including space frame

Providing and fixing motorized 6 m wide sliding gate with water resistant four channel remote transmitter and flashing light serving safety requirements. The gate shall have 3 station push buttons(IP65) mounted on wall/pillar in the vicinity of the gate with "Open/Emergency Stop/Close" controls. Sensors or photocells to monitor the passageway. Safety edges to protect people from accidental crash or damage. The motorized gate shall have electro-mechanical actuators to maintain a minimum opening and closing speed of 0.13m/sec with Torque 74Nm and power supply requirement of 230V. The system should have obstacle detection mechanism to stop the movement of gate and built-in anti-jerk system to prevent damages to the automation system

An Eagle will be seen about to flying after catches a snake by its nails. will be placed on 6 by 6 feet base. Material - FRP( Fiberglass) with MS framing inside and Stone filling to maintain strength of this FRP Artifact. Finish options :-Antique metal / stone/ marble looks or wooden finish, any colour. FRP work will be done in double layers. Civil works:- Civil foundation will be provided to support the Sculpture with marble stone surface finishing, solid concrete work with 100KG MS frame

Civil work maintenance cost for 5 years:- DLP period for 1st year including 1st year maintenance

Civil work maintenance cost for 5 years:-DLP period for 2nd year including Maintenance for 2nd year

Civil work maintenance cost for 5 years:- Maintenance for 3rd year

Civil work maintenance cost for 5 years:- Maintenance for 4th year

Civil work maintenance cost for 5 years:- Maintenance for 5tth year

Electrical,Mechanical,HVAC,Fire fighing,plumbiing,Sanitary,water supply etc, work maintenance cost for 5 years: DLP period for 1 year including 1 year Maintenance

Electrical,Mechanical,HVAC,Fire fighing,plumbiing,Sanitary,water supply etc, work maintenance cost for 5 years: DLP period for 2nd including maintenance for 2nd year

Electrical,Mechanical,HVAC,Fire fighing,plumbiing,Sanitary,water supply etc, work maintenance cost for 5 years: Maintenance for 3rd year

Electrical,Mechanical,HVAC,Fire fighing,plumbiing,Sanitary,water supply etc, work maintenance cost for 5 years: Maintenance for 4th year

Electrical,Mechanical,HVAC,Fire fighing,plumbiing,Sanitary,water supply etc, work maintenance cost for 5 years: Maintenance for 5th year

Bidder Name

Amount

Krishna Construction Co(GSTN-06AALFK6441Q1ZP)

RK GANDHI(GSTN-06ALIPG1659G1Z7)

LNA INFRAPROJECTS PVT.LTD.(GSTN-NA)

GLOBE CIVIL PERFECT AIR CONSORTIUM(GSTN-NA)

Krishna Construction Co

RK GANDHI

GLOBE CIVIL PERFECT AIR CONSORTIUM

Krishna Construction Co

RK GANDHI

GLOBE CIVIL PERFECT AIR CONSORTIUM