ZPP/Edu/sakhariopen02

Item No. 1 :- Removing cement or lime plaster including disposing of the spoils as directed with all leads, lifts, complete. Spec. No.: As directed by Engineer in charge.

Item No. 2 :-Excavation for foundation in earth,soils of all types, sand gravel and softmurum,including removing the excavated material up to a distance of 50 meters beyond the building area and lift as Specified, stacking and spreading necessary dewatering etc complete.

Item No. 3:-Providing dry trap/rubble stone soling 15 cm to 20 cm thick including hand packing and compacting etc. complete.

Item No.4 :- Providing and laying in situ 1:4:8 cement concrete of trap/granite /quartzite /gneiss metal for haunch filling including compacting, curing, mixing etc. complete. (with fully automaticmicro processor based PLC with SCADA enabled with reversible drum type mixer with natural sand)

Item No. 5 :-Providing structural steel work in trusses, other similar trussed purlins and members with all bracing, gusset plates etc. as per detailed designs and drawings or as directed including cutting, fabricating, hoisting, erecting fixing in position, Making riveted/ bolted/ welded connection and one coat of anticorrosive paint and over it 2 coats of oil painting approved quality and shade etc. complete

Item No.6:-Providing and fixing of colour coated Zincaluminium( R ) AZ150 ( min 150 gms/sq.mt. total on each side ) profiled sheets for roofing. The feed material is manufactured out of nominal 0.45 mm Base Metal Thickness ( BMT ) (0.5 mm TCT ), Hi-strength steel with min.550 MPa yield strength, metallic hot dip coated withAluminium-Zinc alloy (55% aluminiumm 43.4% zinc 1.6% silicon) with COLORBOND ( R ) steel quality super durable polyster paint coat (with inorganic pigment). The paint shall have a total coating thickness of nominal 35 mm, comprising of nominal 25mmexterior coat on top surface and nominal 10 um reverse coat on back surface. Profile sheet shall have nom. 950-1050 mm effective cover width and nominal 25-30 mm deep ribs with sublet square fluting in the five pan at nominal 180-250 mmcenterto-center. The end rib shall be designed for anti-capacity groove. and return leg. The feed material should have coil manufacturers product details marked a regular interval. including fasteners with min. fastened with min. 25 um Zinc-Tin alloy coated, Hex head, self-drilling screw etc. complete. (weight of profile 4.52 Kilogram/Square Metre) 600 mm girth (SurfaceWidth).

Item No.7 :-Providing and Siporex block of sizes 200 x 240 x 650 mm for fixing etc. complete.

Item No.8 :- Providing and fixing in position Mild Steel angle Door frame of size 1000x2100 mm with door shutter including holdfast ……….etc complete.

Item No.9 :- Providing and fixing in position Mild Steel Window frame with shutter 20 gauge sheet without ventilator of size 900x1200 mm including……….etc complete.

Item No.10:-Providing rough cast cement plaster externally in two coats to concrete, brick or stone masonry surfaces in all positions with base coat of 12 to 15 mm thick in C.M. 1:4 and rough cast treatment 12mm thick in proportion 1:1 1/2:3 including scaffolding and fourteen days curing complete.

Item No.11:-Providing and applying plaster / wall punning with plaster of paris ( with plaster of paris material) in 10 to 13 millimeter thickness to previously plastered surface / or on newly brick surface ( Excluding rough cast plaster ) in all position including preparing and Finishing the surface scaffolding etc.complete

Item No.12:-Providing and applying washable oil-bound distemper of approved colour and shade to old and new surfaces in two coats including scaffolding, preparing the surfaces. (excluding the primer coat.) etc. complete.

Item No.13 :-Providing and applying two coats of exterior acraylic emulsion paint confirming to corresponding I.S. of approved manufacture and of approved colour to the plastered surfaces including cleaning ,preparing the plaster surface, applying primer coat ,scaffolding if necessary , and watering the surface for two days etc complete.

Item No.14 :- Providing uncoursed rubble masonry of trap / granite / quartzite / gneiss stones in cement mortar 1:6 in foundation and plinth of inner walls / in plinth of external walls including bailing out water manually , striking joints on un exposed faces and watering etc.complete..

Item no.15:-Filling in plinth and floors with approved excavated material in 15cm. to 20cm. layers including watering and compacting etc. complete.

Please Enable Macros to View BoQ information