Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹2.3 LAccepted-Finance | 1 | Accepted-Finance Ok | |
| 2 | 2₹2.3 L+₹1,000 (0.44%)Accepted-Finance | 2 | Accepted-Finance Ok | |
| 3 | 3₹2.3 L+₹2,800 (1.23%)Accepted-Finance | 3 | Accepted-Finance Ok |
Tender Value
₹2.3 L
EMD Value
₹4,607
Closing Date
4 Feb 2025, 4:00 pmClosed
AE Electrical SHQ BSF Raipur
SHQ BSF Raipur Sector 3 Naya Raipur
CO UG SUMP FOR RAIN WATER HARVESTING AROUND 120 MEN BARRACK and 14 NOS TEMP BARRACK AT BSF CAMP NAYA RAIPUR UNDER SHQ BSF RAIPUR SUB HEAD PROVIDING AND INSTALLATION OF OPEN SUBMERSIBLE MOTOR PUMP INCLUDING SERVICE CONNECTION
2025_BSF_846112_1
Elect/Tender/KLP Raipur/2024-25/04
Open Tender
Electrical Works
Works
SHQ BSF Raipur Sector 3 Naya Raipur
Please refer Tender documents
2 documents required · 2 mandatory
₹0
₹4,607
18 Feb 2025
25 Jan 2025
5 Feb 2025
25 Jan 2025
4 Feb 2025
25 Jan 2025
Amount
Supplying and Lowering of 5 HP (3.70 KW), 440 V Submersible motor for open well, 4 stage pump having outlet 65 mm x 50 mm capable of discharge 580 to 200 ltr per minute water at head upto 17 m to 45 Mtr ,suitable for openwell as required in all respect Make Havells or equivalent to Kirlosker/CG/KSB
Supplying and lowering of GI Pipes (Class B) of size 2 inches/50 mm including welding both side flange of suitable size for coupling of column pipes ISI marked having length upto 10 Feet including two nos of clamps for holding the column pipes and different size nut bolts with washers and gasket complete as required. Jindal make or eqivalent to ravindra/maharstra seamless/TATA/make
Supplying and laying of Flat three core and 4 sqm PVC insulated copper conductor and PVC sheathed 1.1 KV grade in the existing RCC/ HUME/ METAL / DWC for submersible motor pumps as required. Havells Make or equivalent to Polycab/RR/Finolex
Supplying, installation, testing and commissioning of outdoor type cement concrete & brick base mounted CPRI approved Fabrication, size 1000 MM X 800 MM X 400 MM cubical type, fabricated with 2 mm thick MS sheet, totally compartmentallised, dust and vermin proof with front openable lockable doors i/c 100 Amp 4 BUS strip PVC insulated aluminium busbar and suitable arrangement for mounting of switchgears mentioned below alongwith supplying and fixing, making inter connection for switchgear i/c painting with one coat of redoxide and two coat of enamel paint etc. as required with following accessories.
1) Incomer:-100 Amp, 4 Pole 15 KA MCCB - 01 Nos
2) Automatic star Delta Starter suitable for 5 HP pump Motor -01 Nos
5) Phase indicating lamps with toggle switch -03 sets
Fabrication, Supply, installation, testing and commissioning of cubicle type feeder pillar (joint box) of size 600mm x 400 mm x 400 mm made out of 16 SWG thick CRCA sheet, floor mounted with 600 mm long 04 nos. legs made out of 35 mm x 35 mm x 5 mm thick angle, out door type, dust proof, water proof, front door openable, having hinged cover , lockable gate and rain protection canopy cover at top complete with 04 nos. bus-bars of 100 amps capacity, feeder pillar shall be suitable for 3 phase, 415 volt AC supply including 1:3:6 cement concrete & trench (Bricks, Cement, Sand and concete etc. for making foundation & trench) etc. as required.
Suppling and laying of one number 4C X 35 Sqmm A2XWY XLPE insulated and PVC sheated aluminium power cable of 1.1 KV grade, in the existing RCC/Hume/DWC/HDPE pipe/open masonary duct/ panel cable ally including connection ,testing etc as required, make Havells/ Polycab/ RR.
Earthing with G.I. earth pipe 4.5 meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/coke and salt as required.
Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt,spring, washer excavation and re-filling etc. as required.
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required.for (4C X 35 sqmm)- (32 mm)
Supplying and fixing cable route marker with Cable route marker with 10CM X 10 CM X 5 MM thick G.I plate with inscription there on,bolted/welded to 35 mm x 35 mm x 6 mm angle iron, 60 cm long and fixing the same in ground as required.
Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc,conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioningand protective covering etc,complete as required. 63 mm dia (63 mm & ID-51 normal)
Supplying of 5 HP (3.70 KW), 440 V Submersible motor for open well, 4 stage pump having outlet 65 mm x 50 mm capable of discharge 580 to 200 ltr per minute water at head upto 17 m to 45 Mtr ,suitable for openwell as required in all respect Make Havells or equivalent to Kirlosker/CG/KSB
UNI TECH SOLUTIONS (BID ID -3166348)
M/S Sanjeev Kumar Contractor (BID ID -3165741)
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .