GE I R AND D/CHD-55/2026-27 REPAIR TO ROADS, PATHS, CULVERT AND HARDSTANDING AT RCMA (3BRD) AND VARIOUS SECTORS OF CHANDIGARH UNDER AOR OF AGE B/R CHANDIGARH

Material and labour for PCC, 1:3:6 C-1 (20mm graded stone aggregate) as in sub base ,under floor and mass concrete complete all as specified and directed.

Material and labour for 400x400x10 mm thick premium quality tiles hi-traffic range of endura full body vitrified with anti skid finish,square in shape, laid in floor/pavings set and jointed on screed bed of 40mm thick in cement mortar 1:4 complete fixed in repair with and including demolition of existing tiles of any description incld bedding layer /PCC etc as ordered as per site requirement and disposal of debries from site complete all as specified and directed. Make : Johnson, Kajaria, Somany, oreintbell

Material and labour for hot applied thermoplastic road marking compound minimum 2.5mm thick, using indigenous modern propeller road marking machine including reflectorising glass beads @ 250gms per sqm area, thickness of 2.5mm is exclusive of surface applied glass beads, as per the code of practice for road marking paints, white with hot thermoplastic road marking compound all as directed including applying one coat of sealing primer including all materials and labour, brushes, tools, equipment, fuel etc complete including applying paints in lines, dashes, arrows etc complete all as specified and directed. Note:- Road marking paint shall be carried out in accordance with manufacturere's instructions and as specified in particular specifications.

Supply and fixing for metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed.

Providing and laying at or near ground level factory made kerb stone in repair of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed.

Dismantling of wrought iron mild steel work of any description or from any position complete all as specified and directed.

Supply and fixing of framed work such as gates, grills, gratings,ladders etc with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred ,iron doors, MS plain sheet, XPM, ladders, framed balusters, walk way, railings, framedwork of water tanks and similar work confirming to Fe 290 Gde-E-165 complete all as specified and directed.

Preparation of old steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed.

Preparation of new steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

Dismantiling plain or corrugated steel sheeting/ AC sheets or of any pattern, any gauge, thickness, including Nainital or similar pattern roof coverings in (G+3) bldgs complete all as specified and directed.