Special Repair of ITI Building at Jubbal in The Jubbal Distt. Shimla H.P

Amount

11.16 ) Precast terrazo tiles 22 mm thick with graded marble chips of size upto 12 mm, laid in floors, and landings, jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing and polishing complete, on 20 mm thick bed of cement mortar 1:4 (1 cement:4 coarse sand) :edium shade pigment using 50% white cement and 50% ordinary cement with in all leads and lifts as per direction of engineer in Charge

11.18) Precast terrazo tiles 22 mm thick with graded marble chips of sizes upto 12 mm, in skirting and risers of steps not exceeding 30 cm in height, on 12 mm thick cement plaster 1:3 (1 cement : 3 coarse sand), jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing and polishing complete with tiles of :Medium shades pigment using 50% white cement and 50% ordinary cement with in all leads and lifts as per direction of engineer in Charge

11.22 ) Tile work in skirting, risers of steps and dado up to 2 m height over 12 mm thick bed of cement mortar 1:3 (1 cement :3 coarse sand) and jointed with grey cement slurry @ 3.3 kg/sqm, including pointing in white cement mixed with pigment of matching shade complete.1 8 mm thick with in all leads and lifts as per direction of engineer in Charge

15.56) Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground with in all leads and lifts as per direction of engineer in Charge

13.3) 20 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix :1:4(1 cement:4 fine sand) with in all leads and lifts as per direction of engineer in Charge

9.1) Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately) second class teak wood with in all leads and lifts as per direction of engineer in Charge

9.5 )Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in?charge.Second class teak wood 30 mm thick shutters with in all leads and lifts as per direction of engineer in Charge

4.17) Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone - III) : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth with in all leads and lifts as per direction of engineer in Charge

4.1) Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:3:6 (1 Cement : 3 coarse sand): 6 graded stone aggregate 40 mm nominal size) with in all leads and lifts as per direction of engineer in Charge

12.25 )Providing and fixing insulating board ceiling of approved quality with necessary nails etc. complete (frame work to be paid separately) :Flame retardant face insulating board 12 mm thick

12.1 )Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.0.63 mm thick with zinc coating not less than 275 gm/ m² (for ceiling) with in all leads and lifts as per direction of engineer in Charge

17.10 )Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :Kitchen sink with drain board 510x1040 mm bowl depth 250 with in all leads and lifts as per direction of engineer in Charge

17.7 a) Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mix with in all leads and lifts as per direction of engineer in Charge

17.8 ) Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings with in all leads and lifts as per direction of engineer in Charge

Providing and fixing vitreous china wash down water closet (European type W.C. pan) with integral P or S trap including jointing the trap with soil pipe in cement mortar 1:1( 1 cement : 1 sand) (seat and cover to be measured and paid for separately) Angle Indian Universal closet with in all leads and lifts as per direction of engineer in Charge

Providing and fixing 10.00/12.50/15.00 litres vitecous china low level flushing cistern with a pair of C.I or mild steel brackets, complete with fittings such as lead valve less syphon 15mm nominal size bras ball valve with polythene float, C,P brass handle, unions and couplings for connections with inlet, outlet and over flow pipes 40mm dia C.P flush band including cutting holes in walls and making good the same and connectiong the flush band with cistern and closet (overflow pipe to be measured and paid for separately). C.P. Connection pipe 45cm. Long:- 15 mm bore: with in all leads and lifts as per direction of engineer in Charge

Providing and fixing plastic seat (solid / Holow type) and cover for wash down water closet with C.P. Brass hinges and rubber buffers. (i) Hollow type : (b) coloured plastic seat and cover with in all leads and lifts as per direction of engineer in Charge

providing and fixing PVC pipe 110mm dia with in all leads and lifts as per direction of engineer in Charge

2)75 mm dia with in all leads and lifts as per direction of engineer in Charge

Providing and fixing PTMT jet spray with 1.5m tube with in all leads and lifts as per direction of engineer in Charge

Providing and fixing C.P brass bib taps with capstan head weigth 400 gms . 15mm dia with in all leads and lifts as per direction of engineer in Charge

Piller tap 15 mm dia with in all leads and lifts as per direction of engineer in Charge

Providing and fixing Brass top stop cocks 15mm dia with in all leads and lifts as per direction of engineer in Charge

Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete with in all leads and lifts as per direction of engineer in Charge

Applying priming coat on new concrete/masonry/asbestos cement/plastered surfaces after and including preparing the surface by thoroughly cleaning oil,grease,dirt and other foreign matter and sand papering as required with in all leads and lifts as per direction of engineer in Charge

Finishing wall with weather proof exterior grade emulsion of approved design (Apexultima) or its equarlied on undecorated wall surfaces (two coats) to give an even shade and final finish after throughly cleaning the surface to remove all dirt, dust and other foreign matter etc including sand paper smooth complete. with in all leads and lifts as per direction of engineer in Charge

Applying priming coat over new wood and wood based surfaces after and including prepering the surface by thoroughly cleaning oil,grease,dirt and other foreign matter) sand papering and knotting.Readymixed paint brushing with white lead for priming with in all leads and lifts as per direction of engineer in Charge

Painting two coats (excluding priming coat)on new wood and wood based surfaces,with readymixed paint,brushing to give an even shade including cleaning of all dirt,dust and other foreign matter sand papering and stopping Readymixed paint other then white with in all leads and lifts as per direction of engineer in Charge

Providing and fixing particle board lining with butt jointing and nails (frame work and cover fillets to be measured and paid separtely (12 mm thick ) with in all leads and lifts as per direction of engineer in Charge

Distempering (two coats) with oil bound washable distemper of approved brand and manufacture and of required shade on undecorated wall surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand papered smooth. Priming coat with distemper primer with in all leads and lifts as per direction of engineer in Charge

Partap Singh Umta

RASHPAL SINGH GOVT CONTRACTOR