REPAIR_MAINT OF INTERNAL WIRING AND ALLIED WORKS AT NE ZONE AT RMS

Amount

Taking down carefully copper/ aluminium point wiring (light, fan, socket or power) complete including fitting & fixtures such as switches with board ceiling roses, pendents, bell/ buzzer, bell push, lamp holders, regulators, sockets, light fittings etc removing material from site and making good tothe disturbed surfaces of walls, ceiling, floors etc including making good the disturbed surfaces and paint touch up to match with the existing surface complete all as specified and as directed

Point wiring complete with two runs of 1.5 sqmm single core PVC insulated FR-LSH cable 1100 volts grade with multi stranded copper conductors, drawn through and including PVC double locked Caseing & caping including provision of 1.5 sqmm, FR-LSH PVC insulated copper cable as earth continuity conductor connected to common earth dolly, including PVC rectangular box for mounting switches/ sockets/ regulators etc with 3mm thick plastic laminated sheet cover of suitable size as required at site and 50mm deep complete all as specifed and as directed Make : Finolex/ Havells /RR Kabel Make of caping/ casing & PVC boxes - Prestoplast/ Finolex / supreme

One light point controlled by one, one way switch

One ceiling /exhaust fan point controlled by one, one way switch

One light point controlled by two way switches

One 3 pin socket outlet 5 Amps on the same board with other switches

One 3 pin socket outlet 5 Amps on the independent board

M&L for one bell/ buzzer point controlled be one push button on the same board with other switches or independent

All as per item No 2 here-in-before but with 2.5 sqmm for 3 pin 15 Amps socket point controlled by one switch on independent board and 2.5 sqmm copper ocnductor green in colour as earth continuity conductor connected to common earth dolly complete all as specifed and as directed

M&L for switch piano flush type single pole, one way 5A Make : Anchor/ Plaza/SSK Hager

M&L for socket outlet 2 in 1, 5 pin 5A flush type Make : Anchor/ Plaza/SSK/ Hager

M&L switch socket combination 2 in 1, 5A/16A, 5 in 1 flush type. Make : Anchor/ plaza/ SSK / Hager

M&L for bell push switch 5 amps piano type flush type. Make Anchor/ plaza/ SSK/ Hager

M&L for ceiling rose 3 terminal PVC/Polycarbonate isolated body completed all as specified and directed. Make : Anchor/ Plaza/ SSK/ Hager

M&L for modular switch 1 way 6A, 1 module. Make : Havells/ Anchor/ Legrand

M&L for modular switch 2 way 6A, 1 module. Make : Havells/ Anchor/ Legrand

M&L for modular switch 1 way 16A, 1 module. Make : Havells/ Anchor/ Legrand

M&L for modular bell push 6A, 1 module Make : Havells/ Anchor/ Legrand

M&L for modular socket 6A2/3 pin combined 2 module. Make : Havells/ Anchor/ Legrand

M&L for modular socket 6A/16A-2/3 pin combined 2 module. Make : Havells/ Anchor/ Legrand

M&L for Electric bell, AC 230 volts, single pole Make : Havells/ Anchor/ Legrand

Replacement of piano switch single pole 5A, one way complete as in position specified and as directed. Make : Anchor/ ABB/ Havells

Replacement of piano switch single pole 15A one way complete as in position specified and as directed Make : Anchor/ ABB/ Havells

Replacement of socket outlet 5 pin 6A, 230 volt flush type complete all as in position specified and as directed Make : Anchor/ ABB/ Havells

Replacement of socket outlet 2 in 1, 5 pin 6/16A, 230 volt flush type complete as in position specified and as directed Make : Anchor/ ABB/ Havells

Replacement of fan regulator 100/120 wall step type AC 220 volt complete as in position specified and as directed Make : Anchor/ ABB/Havells

Replacement of lamp holder suitable for batten fittings complete as specified and as directed Make : Anchor/ ABB/ Havells

Replacement of PVC switch board 10"x12" suitable for switch socket complete as specified and as directed Make : Anchor/ ABB/ Presto Plast

Replacement of PVC switch board 8" x 6" suitable for switch socket complete as specified and as directed Make : Anchor/ ABB/ Presto Plast

Replacement of PVC switch board 7"x4" suitable for switch socket complete as specified and as directed Make : Anchor/ ABB/ Presto Plast

Replacement of PVC switch board 4" x 4" suitable for switch socket complete as specified and as directed Make : Anchor/ ABB/ Presto Plast

Replacement of MCB SP 6 to 32 Amps 230 volt complete as specified and as directed Make : ABB/ Siemens/Legrand

Replacement of MCB SP 16 to 32 Amps 230 volt complete as specified and as directed Make : ABB/ Siemens/Legrand

Replacement of MCCB 125 Amps 4 pole 16 KA complete as specified and as directed Make : ABB/ Siemens/ Legrand

M&L for replacement of PVC casting & caping 20mm one length 3meter complete as specified and as directed

M&L for replacement of PVC casting & caping 25mm one length 3meter complete as specified and as directed

M&L for replacement of PVC flexible conduit 20mm one length 5 meter complete as specified and as directed

M&L for replacement of PVC confuit 25mm one length 5 meter complete as specified and as directed

Replacement of engagement light red, green, blue & yellow

M&L for replacement of twin core round 2.5sqmm cable copper conductor

Replacement of thread bulb 15 watt (Small)

Replacement of thread bulb 15 watt (Big)

Replacement of Tube rod 36 watt (Warm/white)

Replacement of flexible pipe size 15mm (Colour : White/ Grey)

Replacement of flexible pipe size 20mm (Colour : White/ Grey)

Replacement of flexible pipe size 25mm (Colour : White/ Grey)

Replacement of flexible pipe size 50mm (Colour : White/ Grey)

Taking down existing burnt aluminium/ copper sub main wiring and M&L for sub main wiring with four runs of 6.00 sqmm and one run of 4 sqmm for earth wire with multi standard copper conductors, 1100 volts grade, drawn through including PVC double locked Casing & caping including complete all as specified and as directed NOTE: Four runs of 6 sqmm + one run of 4 sqmm and one run of PVC casing & capping and its accessories of suitable size shall be measured as one unit length. Make : Finolex/ Havells/ RR Kable. Make for caping/casing : Prestoplast/ Finolex/ Supreme

All as per Ser item No 42.00 here-in-before but with two runs of 10 sqmm and one run of 6 sqmm for earth wire

All as per Ser item No 42.00 here-in-before but with two runs of 10 sqmm and one run of 4 sqmm for earth wire

All as per Ser item No 42.00 here-in-before but with two runs of 4 sqmm and one run of 2.5 sqmm for earth wire

Taking down carefully any type light fittings complete, including fitting & fixtures such as tubelight fittings, decorative lights, ceiling lights, bldg security lights fittings etc, removing material from site and making good to the distrubed surfaces of walls, ceiling, floors etc including making good the disturbed surfaces and paint touch up to match with the existing surface complete all as specified and as directed

M&L for replacement of 42 watt LED 2x2 recess mounte ceiling light fitting extruded aluminium heat sink propvided for efficient heat dissipation & integrated electronic drive etc with all accessories internally pre wired Make CG Cat No LCTLRN-36-FO-CDL or equivalent in Bajaj/ Philips/ Havells

M&L for replacement of 1x20W LED security light fitting, drawn through including connecting up to from ceiling rose to the light fitting incl taking down old unsv light fitting complete all as specified and directed Make : Havells Cat Part No LHETAXU7PAS020 or equivalent in Bajaj/ Philips

M&L for20W LED 4"tube with double side connection for LED retro lamps wall mounted extruded dissipation & integrated etc with all accessories internally pre-wired and fixing the same on and including two Nos PVC blocks and connecting up ceiling rose to the light fitting complete all as specified and directed Make : Havells (LED Rod) or equivalent in Philips/ Bajaj

Supply and fixing as in replacement for LED light fitting 1 x 10 Watt LED (Lamp), 230V, decorative, wall mounting, champagne gold finish fixture with plastic body including all accessories and connecting to ceiling rose complete all as specified and as directed Make: Havells STYLO series Cat Part No LHFOECE1TZ1O014 or equivalent approved make of Philips/ Bajaj/ Surya Roshni Ltd/ Wipro

M&L for 10W LED 2" wall mounted polycarbonate batten internally pre-wired with electronic driver and polycarbonate diffuser and fixing the same on ceilig rose to the light fitting incl taking down old unsv light fitting complete all as specified and as directed

M&L for MCB distribution board double door type (for incoming MCCB & out going MCBs) TPN 4 way, sheet steel, powder painted with bus bar neutral link & earth bar etc and fixing only incoming MCCB and MCBs of various rating capacity including taking down old unsv DB of any capacity complete all as specified and as directed. Make : Legrand Cat Part No 607750 or equivalent in Havells/ Indoasian

M&L for MCB distribution board double door type SPN 8 way sheet steel powder painted with bus bar neutral link & earth bar etc and fixing MCBs of various rating capacity including taking down old unsv DB of any capacity complete all as specified and as directed. Make : Legrand Cat Part No 507611 or equivalent in ABB/ Seimans/ Legrand

All as per item No 53 here-in-before but SPN 4 way distribution board Make : Legrand Cat Part No 507610 or equivalent in ABB/Havells/ Siemens

All as per item No 53 here-in-before but SPN 2 way distribution board Make : Legrand Cat Part No 507791 or equivalent in ABB/Havells/ Siemens

M&L for MCCV FP, 415 Volts adjustable type, 160 Amps 4 Pole with breaking capacity 36KA , suitable for fixing in MCB DB complete all as specified and as directed Make : Legrand Cat Part No 420097 or equivalent to ABB/ Siemens

M&L for MCB TPN 63 Amps, 415 Volts, 50 Hz suitable for fixing in MCB DB 'C' series complete all as specified and as directed Make : Legrand Cat Part No 408683 or equivalent to ABB/ Siemens

S&F sheet metal encloser with two pin and earth plug and socket complete with one single pole MCB 20 Amps 240 V all as per specified and as directed Make : ABB/ Siemens/ Legrand

M&L for MCB SPN 30 Amps, 230 Volts, 50 Hz suitable for fixing in MCB DB 'C' series incl taking down old unsv MCB complete all as specified and as directed Make : Legrand Cat Part No 408617 or equivalent in ABB/ Siemens

M&L for MCB SP 5-40 Amps 240 Volts, 50 Hz suitable for fixing in MCB DB 'C' series complete all as specified and as directed Make : Legrand Cat Part No 408587 to 408595 or equivalent to ABB/ Siemens

S&F globe light PVC off sizes incl base holder bracket complete with 11 Watt LED Bulb and all accessories complete all as specified and as directed Make : Philips/CG/Bajaja

S&F Bed light with 9 Watt LED lamp and all accessories complete all as specified and as directed Make : Philips/ Wipro/Syska LED/ CG/ Bajaj)

S&F for decorative wall/ ceiling light fixtures complete with 1x15watt LED lamp connecting up with ceiling rose with suitable size new flexible copper cable incl taking down existing unserviceable one complete all as specified and directed Make : Havells/ CG/Bajaj/ Philips

M&L for18 watt Fazer LED panel, cutout size 21.0 x 21.0 cm recess mounte ceiling light round fitting extruded for efficient heat dissipation & integral non replaceable driver ultra slim body suitable for high ceiling height electronic drive etc with all accessories internally pre wired HAVELLS Cat Part No LHEBMCP7UZ1W018 or equivalent in CG/ Bajaj/ Philips

M&L for earthing complete with galvanised steel earth plate electrode of size 600x600x6mm thick buried directly in ground (earth pit not less than 2.25m deep below the normal ground level) with top edge of the earth plate not less than 1.5mtr below normal ground level connected to galvanised earth lead wire 4mm dia as earth lead connected by means of bolts, nuts, washers and check nuts all as shown in electrical plate No 3 of MES SSR Part-I including testing on completion complete all as specifed and as directed. NOTE : (i) The unit rate shall also included for earth work in hard/ dense soil, PCC (1:3:6) type C1 chamber, C1 cover 10 mm thick funnel with GI watering pipe 20mm bore medium grade , GI protection pipe light grade 15mm bore and wire mesh complete in addition to item No 1 (a) to (e) of preamble (notes) under sub heading earthing specfied on Ser Page No 389 of MES SSR Part-II. (ii) Earthing lead and GI protection pipe beyond 7.5m will be measured and paid separately. (iii) Test points shall be made of GI strip 32x6mm bridge type mounted on insulators, where ever applicable

VIHUTO YEPTHO

M/S RAHUL TRADING CO.

sanjay kumar

M/S MUNGA LAL PRASAD

SK SINGH

Rameshwar Prasad