REPAIR/MAINT TO CERTAIN ROAD AND CONNECTED ITEMS AT CERTAIN AREA OF ZONE C AND D UNDER AGE B/R-I AT GE JHANSI

Amount

Repair to pot holes any depth, not exc 1.0 sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads , paths etc. cutting around edges to at least 25mm in depth making good by filling in screened & graded road metal, watered and well ramming (including supply of road metal) complete all as specified and directed.

M& L for Scarifying or picking gravelled,macadam or btuminous macadam surfaces exc 50 mm and n exc 100 mm deep, and area n exc 400 sqm complete all as specified and directed.

M& L for 75mm thick (compacted thickness) water bound macadam complete laid in one layer compacted thickness with coarse aggregate of grading 3 (50 to 20 mm size) and surfaces of layer will be blinded with screening and moorum, spread ,watered, consolidated and compacted , rolled and consolidated to required gradient and camber using sand or lime stone with 8 to 10 tone power roller complete all as specified and directed.

M&L for preparing WBM surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surfaces with gunny gags to remove all loose dirt etc, applying evenly a priming/tack coat with bituminous primer at 10 kg per 10 sqm using paving bitumen VG 10 complete all as specified and directed.

M&L for laying premix bituminous, macadam with paving bitumen VG 30 @ binder content of 4% by weight of total mix laid/rolled and compacted to required gradient and camber (consolidated thickness 75mm or less) complete all as specified and directed.

M&L for providing bituminous premixed asphaltic semi dense concrete (design mix) 40mm consolidated thickness with 5.5% binder content by weight of total mix, using paving bitumen VG30 of any penetration laid/spread uniformly by means of mechanical pavers over primed WBM surfaces rolled and compacted to required camber and gradient, complete 10 to 12 ton power roller, complete all as specified and directed.

M&L for preparing black top surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surfaces with gunny gags to remove all loose dirt etc and applying evenly a priming/tack coat with bituminous primer at 5 kg per 10 sqm using paving bitumen VG 10 complete all as specified and directed.

M&L for providing bituminous premixed asphaltic semi dense concrete (design mix) 30mm consolidated thickness with 5.5% binder content by weight of total mix, using paving bitumen VG30 of any penetration laid/spread uniformly by means of mechanical pavers over primed WBM surfaces rolled and compacted to required camber and gradient, complete 10 to 12 ton power roller, complete all as specified and directed complete all as specified and as directed.

S&F in repair for cat eye reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions complete all as specified and directed.

M & L for preparing bituminous surfaces of road and marking 2.5mm thick centre lines, stop lines, dashes, arrows etc. and the like n. exc 10cm wide on roads pavements with hot applied thermo plastic road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufacturers instruction complete all as specified and directed.

S&F in repair for solar stud (Cat eye) aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/0.3 watt one NI-ed rechargeable battery (1.2V/1600MA) consisting of super bright LED with10,000 to 18,000 mcd completed as per manufactures instructions etc complete all as specified and directed.

S&F in repair of metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed completed as per manufactures instructions etc complete all as specified and directed.

Dismantling of Stone slabs and tiles of any description or thickness in floors , aprons etc laid dry and pointed in CM. complete all as specified and directed.

M&L for factory made kerb stone of size 300 x 150 x 450mm , M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed. Note : Rate for the necessary form work included in the same item.

M&L for preparation of newly concrete wall surfaces of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of priming paint plaster coat complete all as specified and directed.

Providing and fixing of Saucer Drain of size 450x300x100 mm (along the sides) in PCC (1:1½:3) completeand provide proper slopes to drain of rain water on the top of drain including all lead lifts etc complete for the finished item of work as per the directions of Bank. Note: No separate measurements will be considered for the excavation.

M&L for 75 mm thick cement concrete type C2 1:3:6 (using 40 mm graded stone agg) in sub base of flooring/ hard standing complete all as specified and directed.

Providing and laying 60mm thick factorymade chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed.

HARNAM SINGH ANIL SINGH (BID ID -3171838)

M/S A.R BUILDERS (BID ID -3173842)