REPAIR TO EXTERNAL PLASTER RCC CHAJJAS FACIA BANDS ETC AND WEATHER PROOF EXTERIOR PAINTING IN TECH AREA AT AFS CHAKERI KANPUR

Amount

Taking down existing loose cement plaster including unsound weaken cement concrete at any position on existing RCC roof projection, ceiling, beam, column and chhajja and cleaning of exposed reinforcement with wire/rotary wire brush , making the surface free from loose material, dirt etc and applying two coats of alkaline rust converting primer (i.e rust remover) confirming to ASTM-B-117,on the rebars (measurement shall be on the basis of exposed concrete) (Make : Feovert of Krishana Conchem,roff rust cleaner of Pidilite, Dr Fixit rust remover, shaliRustOff of STP Ltd).

M & L for providing and applying two coats of anti-rust protective coating in the form of acrylic polymer with cement in 1 : 1.5 proportion ( 01 part polymer and 1.5 parts cement ) on rebars after cleaning of rust scales as per manufacturers instructions ( measurment on the basis of exposed concrete area ). (make IPNET of Krishana Conchem, new coat from Dr Fixit or equivalent of STP Ltd).

M & L for providing and applying stuctural grade EPIBOND-21-LP of Krishna conchem or equivalent of Dr. Fixit / STP Ltd prior to application of any type of mortar plaster or micro concreting confirming to ASTM -C-882-91 (Arizona stant shear test) to ensure bonding between old concrete and new concrete complete all as specified and as directed.

M & L sand faced cement plaster 20 mm thick in two coats using factory manufactured premix/redymix of 'Roofit mix' of Primer floor to Roof materials pvt Ltd / "Easy plast of M/S wall plaste products pvt Ltd , 'Readyplast' of m/s Ultratech cement Ltd Sound plaste PMC -1 of M/s Sound buildcare pvt Ltd having minimum composion of CM 1 : 4 using fully treated dry, well graded natural sand confirming to IS 383 suitable for external entering, having low rebound properties, low water demand for curing properies, mechanical mixing with water in a metalic only to make good concistency as per the specification for the manufacturer and applying over exterior masonry and concrete surfaces with base coat of 12 mm thick and finishing coat of 8 mm thick final rendering including using richer mix making corners if necessary, at all floors and level, including making grooves of exsisting size wherever required, including cleaning the surfaces, curing etc complete all as specified and directed.

M & L for preparation of old decorated surfaces and applying one coat of white wash on walls,complete all as specified and directed.

All as per sl item No 5, here-in-before but applying two coat of white wash on walls ,complete all as specified and directed.

All as per sl item No 5, above but one coat of white wash on ceiling , complete all as specified.

M & L for preparation of old painted steel and iron surfaces of any description over 10cm girth or width not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed.

M & L for preparation of old painted surfaces of wood and wood based materials of any description over 10cm girth or width not otherwise described and applying one coat of synthetic enamel paint all as specified and as directed.

M&L for preparation of old painted steel and iron surfaces surfaces of any description, not otherwise described over 10cm width or girth not otherwise described and applying one coat of Aluminium paint all as specified and as directed.

M & L for preparation of old distempered surfaces of walls including corinces, pillars etc and applying one coat of Oil Bound Distemper complete all as specified and directed.

All as per sl item No 11 here-in-before but on ceiling ,complete all as specified and directed..

All as per item no. 11 but two coat two coat of oil bound distemper, complete all as specified and directed.

M&L for preparation of old decorated surfaces of walls and applying one coat of cement based paint complete all as specified and directed.

All as per sl item No 14 but applying two coat of cement based paint, complete all as specified and directed.

M & L for writing letters or figures (Block, Roman, Italic or Indian) with synthetic enamel paint n.exc. 30 cm high, all as specified and as directed by Engineer-in-Charge.

M&L for complete removing of external treatment including Washing, rubbing down and stopping of distempered and painted surfaces on wall, complete all as specified and directed.

M&L 1mm thick wall care putty on wall complete all as specified and directed.

Taking down cement plaster on bricks or stone walls etc., including raking out joints, hacking for key scrubing down with water etc. complete all as specified and directed.

M&L rendering 10mm thick in CM (1:6) on fair faces of brick work or concrete surfaces, finished even & smooth without using extra cement complete all as specified and directed.

M&L rendering 15mm thick in CM (1:4) on fair faces of brick work or concrete surfaces, finished even & smooth without using extra cement complete all as specified and directed.

M & L for preparation of new undecorated surfaces of walls and applying two coat of Oil Bound Distemper over and including a coat of primer and 1mm thick wall care putty complete all as specified and directed.

M & L for preparation of new undecorated surfaces of walls and applying two coat of cement based paint over a coat of prime rcomplete all as specified and directed.

M&L for complete removal of existing surface finish of wall and ceiling and applying two coats of Exterior Weather Emulsion paint over a coat of exterior wall primer all as specified and directed.

M&L preparation of old surface of wall or ceiling and application of one coat of exterior weather emulsion paint complete all as specified and directed.

Demolition of cement concrete unreinforced in ground floor and any thickness ,description and in any position not otherwise described , complete all as specified and directed.

M&L 75mm thick cement concrete type C-2 1:3:6 mix (40 mm graded aggregate) as in flooring/paving/plinth protection,including finishing even & smooth w/o using extra cement, complete all as specified and directed

M&L for preparation of surfaces of roads, bituminous rigid, pavement, flexible pavings, aprons, kerbs and the like exceeding 10 cm width or girth as in lines dashes, arrows, letters etc and applying one coat of aqua based road making paint of tint white or golden yellow or Orange or as required at site complete all as specified and directed.

Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover, complete all as specified and directed.

S&F Solid PVC Wall Lining consisting of 5mm thick Plain colour single side prelam PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing, complete all as specified and directed.

S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing,complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed.

M&L for full body Vitrified Ceramic tiles 8-9 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. laid over and including 15 mm thick screed bed in CM 1:6 set and jointed inneat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for full body Vitrified Ceramic tiles 8-9 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in dado/skirting etc. over and including 10 mm thick backing coat in CM 1:4 and jointed in neat cement slurry and pointed in white or coloured cement to match shade of tiles complete all as specified and directed.

M&L 300x450mm, ceramic vertical 3D tiles, matt/gloss, 5mm to 6mm thick tiles with high definition and digitally printed over and including 10 mm thick rendering (1:4) on vertical surface as dado/skirting set and jointed in neat cement slurry and pointed in white or coloured cement complete all as specified and directed

J.B.ENTERPRISES

MISHRA CONSTRUCTION COMPANY

M/S SDS Construction Co.

smc system & services

BVV ENTERPRISES