Annual Maintenance Plan for the Year 2020-2021 of Rural roads under Hamirpur Sub-Division. C/O V-Shape and thermoplastic compound on Link road Nijar to Rada km 1/00 to 1/800

Amount

Providing and laying of hot applied thermoplastic compound 2.5 mm ( two point five milimetre ) thick including reflectorising glass beads @ 250 gms per sqm ( two hundred fifty gram per square metre ) area, thickness of 2.5 mm ( two point five milimetre ) is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes as per direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, malakana, toll tax, sale tax, GST or other taxes imposed by the Government.

Construction of V-Shape drain of size 45x25cm (Forty five into twenty five centimetres) with thickness of concrete 10cm (Ten centimetres) by providing and laying plain cement concrete 1:3:6 (One cement : Three sand : Six graded/crushed stone aggregate) 20mm (Twenty milimetres) M-10 (M-Ten) nominal mix in foundation complete including form work with steel plates and curing complete as per drawing and technical specification clause 802, 803, 1202 & 1203 and as per direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, malakana, toll tax, sale tax, GST or other taxes imposed by the Government.

Terms and Conditions:- The work will be strictly executed as per HPPWD specifications, The contractor will precure cement at their own level from Civil Supply Depott. After the approval of permit from the competent authority and other material from market as per Department specification issued by the Addition Chief Secretary PW to the Govt. of HP vide No. PBW (B) C (17) 2/2012 dated 07 August 2018 and all other condition are liable & carriage will be born by the contractor, he bills of all materials precured by the concractor M-form of mining materials used for excution of work must be submitted to the authority concerned alongwith concractor bill, All the relevant tests are to be got conducted by the contractor at their own cost from the approved Govt. Laboratory and the tests report are to be submitted to Engineer-In-Charge, The mixing of material shall be done with hot mix plant and job mix formula shall got approved from the Engineer-in-Charge before the start of the work & The laying of BC shall be done with the paver finisher.

Japan Singh