Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹27.7 LAccepted-AOC UNIT NO 7 MOUNT VIEW CO OP HOUSING SOCIETY LIMITED MUMBAI MANKHURD 400 088 | MUMBAI SUBURBAN | MAHARASHTRA | 400088 | L1 | Accepted-AOC Lowest | |
| 2 | L2₹27.9 L+₹16,743.82 (0.60%)Rejected-AOC TULSI ASTHA FLAT NO 1 PLOT NO 54 SECTOR 12 VASHI NAVI MUMBAI THANE 400 703 | THANE | MAHARASHTRA | 400703 | L2 | Rejected-AOC Not Lowest | |
| 3 | L3₹28.7 L+₹98,783 (3.56%)Rejected-AOC FLAT NO 302 BUILDING NO 3 SAI SUNITA APARTMENT PASAVALI KALYAN MUMBAI 421306 | MUMBAI | MUMBAI | MAHARASHTRA | 421306 | L3 | Rejected-AOC Not Lowest | |
| 4 | L4₹29.2 L+₹1.5 L (5.41%)Rejected-AOC ROOM NO 220 2ND FLOOR DEVGIRI BUILDING NO 65 B LALLU BHAI COMPOUND MANKHURD MUMBAI 400043 | MUMBAI SUBURBAN | MAHARASHTRA | 400043 | L4 | Rejected-AOC Not Lowest | |
| 5 | L5₹29.3 L+₹1.6 L (5.60%)Rejected-AOC | L5 | Rejected-AOC Not Lowest |
Tender Value
₹49 L
EMD Value
₹98,000
Closing Date
15 Oct 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (NW) MANKHURD
GE (NW) MANKHURD,MUMBAI-400088
ADDITION/ALTERATION AND SPECIAL REPAIR TO MAIN GATE WATCH TOWER, TATA WATCH TOWER AND P-135 BLDG AT TS MAHUL AND PROVISION OF HARDSTANDING WITH TWO FEET RAISE PLATFORM FOR CONICAL HF ANTEENA D5 AT NTS MAHUL UNDER GE (NW) MANKHURD
2022_MES_552678_1
8171/E8
Open Tender
Civil Works
Item Rate
180 days
GE (NW) MANKHURD
AS PER NIT TENDER DOCUMENTS
9 documents required · 9 mandatory
₹500
GE (NW) MANKHURD
₹98,000
Yes
10 Jan 2023
17 Sept 2022
17 Oct 2022
17 Sept 2022
15 Oct 2022
1 Oct 2022
Amount
Dismantling completely existing roof treatment (excluding cement screed bed ) including loosened cement plaster and exposing the top surface of RCC slab and making good the same in CM 1:4 and removing rubbish, etc to a distance exceeding 500m and not exceeding 1.0km complete all as specified and directed by the Engineer-in-charge
M & L for APP modified roof treatment over existing roof slab etc to be executed through approved authorised applicator of the membrane manufacturer with the following specifications complete all as specified and directed:- (a) Applying oil bound bitumen primer @ 0.40 litre/ Sqm manufactured by the same manufacturer as that of APP with a density 0.87-0.89 Kg per litre at 25 degree centigrade on the prepared dry surface. (b) Laying APP modified water proofing membrane reinforced with non woven polyester fibre weight not less than 160gm/Sqcm using butane torch by torch application with 10cm side lap and 15cm end lap. (c) Physical properties of membrane shall be as under:- (i) Membrane weight not less than 3.50 Kg/Sqm. (ii) Non woven polyester weight not less than 160gm /sqm. (iii) Softening point of membrane not less than 150 degree Celsius. (iv) Joint tensile strength-longitudinal not less than 650N/Sqcm and transverse not less than 450 N/Sqcm (v) Tear strength-longitudinal not less than 300 N & transverse not less than 250 N. (vi) Elongation : > 20% in both directions. (vii) Impermeability/water tightness at 2 Kgf/cm2. (viii) Water absorption - Not more than 1% on mass within 24 hours. (ix) Cold flexibility - Minimum (-) 20C. (x) Dimentional stability % change = Maximum 1%.
M&L for applying two coat of solar reflective bituminous aluminium paint @ 0.10 Kg/Sqm over APP membrane surfaces, complete all as specified and directed.
M&L 10 mm thick cm layer of (1:3) with WPC when the concrete is still green complete all as speicified and directed.
Taking down cement or cement lime plaster on brick or stone walls etc including raking out joints, hacking for keys, scrubbing down with water complete all as specified including necessary scaffolding and safety arrangement
Taking down chowkats or frames with shutters (without taking off shutters from the frame) not exceeding 1.5 sqm each.incl taking down grill and stacking for issued under Sch of Credit.
All as per item No 6 above but exc 1.5 Sqm but n.exc 4 Sqm each
Taking down the grill not exceeding 2sqm each.incl taking down grill and refixing the same in the same opening after complete cleaning and when the repair work is complete or as and when directed by the Engr in Charge.
Taking down chowkats or frames, not exc 1.5 sqm each with wooden/ flush/ PVC shutters (Without taking off shutters from the frame) including taking down of hold-fasts by cutting/chasing etc from existing surfaces and also taking down of MS Grills (where exists), refixing the same after proper cleaning and when repairs to plaster etc, complete all as specified and directed.
Demolition of slabs and tiles of any description or thickness in floors, aprons, Dados and Skirting including cement mortar bedding / backing, removing rubbish off the premises outside MD Land, complete all as specified and directed.
S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS:733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge
S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supply and fixing in opening as per specification given under SSR Part II 2010 including making good the disturbed surface. Make: Rajashree or equivalent.
M&L for factory made solid PVC panel type PVC door shutter 30mm thick consisting of frame madeout of MS tubes for top and bottom rails MS frame shall be covered with moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rails, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent supplying and fixing in the frame at site as per specifications and drawing given under SSR Part II 2004 complete as as specified.Make : Rajashree or equivalent.
S&F 2nd class hard wood plain, solid straight chowkats and frame, wrought framed rebated on the solid, rounded or chamfered, put together with glue, pinned at joints including good the disturbed surfaces of walls complete all as specified.
S&F 2nd class hard wood 35mm thick, plain, framed panelled shutters (any number of panels), with panels of timber flat on both sides (Feather edged) or of veneered particle board medium density, wood particle board with commercial face veneers, fitted to chowkats complete.
S&F 2nd class hardwood 35mm thick glazed and skeleton shutters open and prepared to rceive glass ,gauze etc (with sash bars) edges of plain, chamferred or rounded, fitted with cut and mitred beads for securing gauzes etc, sizes of members of sizes of shutters as specified in SSR part -I sec 8,cluse 8.24(a).
M&L for preparation of new or previously untreated wood based surfaces of any description not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as directed.
S&F MS hold fasts and similar small articles complete all as specified.
S&F aluminium anodised sliding door bolts with hasp and staple (Bolt type) and fixing clip of lsheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy, length of bolt 300mm
S & F stainless steel butt hinges with extruded aluminium alloy with galvanised mile steel hinges pins 100mm size.
S & F aluminium anodised barrel tower bolt of extruded section of size 150 mm length.
S/F aluminium, anodised, barrel tower bolts of extruded section and fixed 200 mm
S & F 150 mm long extruded aluminium alloy handles, fabricated type anodised complete all as specified and directed by Engr-in-Charge.
Supply only 5 mm thick plain sheet glass, ordinary quality, complete all as specified and directed.
Supply and fixing 5 mm thick plain sheet glass, ordinary quality with and including provision of new rubber gasket after hacking out old broken glass (any size, quality or description) for existing aluminium joinery, complete all as specified and directed.
Supply only aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm for new aluminium joinery, complete all as specified and directed.
S& F in repair Wire netting of stainless steel wire 1.4mm dia fixed with tinned tacks of stainless steel wire staples and sIze of mesh 20mm complete all as specified and as directed
M&L for 12 mm thick polymer modified ready mix cement based plaster on the wall surfaces including finishing surfaces even and smooth, complete all as specified and diected Make: Easy Plast from M/s wall plast or chemplast or readyplast from Ultratech Note: The thickness of plaster specified above is the minimum thickness and the quoted rates shall also be deemed to include for provision of dubbing of the surfaces with ready mix plaster and nothing extra shall be payable on this account.
M&L for rendering 05 mm thick in cement mortar (1:3) to ceiling, finishing the surfaces even and smooth without using extra cement, complete all as specified and directed.
M&L for Material & Labour for applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces
M&L for 1 mm thick (minimum) white cement based wall care putty in two coats on new or old surfaces of walls/ceilings etc, finished even and smooth, complete all as specified and directed.
M & L for preparation of new plastered surfaces of wall and applying two coats of oil bound distemper with roller over one coat of primer, complete all as specified and directed.
M & L for preparation of new plastered surfaces of ceiling and applying two coats of oil bound distemper with roller over one coat of primer, complete all as specified and directed.
M&L for coloured 450x300x6mm thick glazed ceramic tiles on vertical surfaces such as skirting,dado etc, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match with the colour of tiles, over and including 10mm thick cement mortar backing coat in CM 1:4, complete all as specified and directed.
M&L for coloured Non-skid ceramic tiles 7 to 8 mm thick (square/ rectangular) of approved size, area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm in floors etc, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match with nthe colour of tiles, over and including 15mm thick cement mortar screed bed in CM 1:6, complete all as specified and directed.
Non Skid ceramic tiles 7 to 8 mm thick, coloured (squares/rectangular) area of each tile exceeding 0.18sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match
M/LScreed bed or bedding layer or mortar 15mm thick for laying floor finishes in CM 1:6
M&L for 20 to 25 mm thick machine cut pre-polished cuddappa stone Slabs (table rubbed and polished) as in cills, jambs, soffits, cooking platform etc, pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of stone slab etc, including moulding/rounding to edges of the slab and also including provision of 15mm thick screed bed in CM 1:4, complete all as specified and directed.
S&F in repairs, white, vitreous China, wash down water closet pan (pedestal pattern), Ist quality, inlcuding plastic water closet seat white, closed pattern with flat bottom and cover and Mild Steel CP or aluminised hinging device, complete all as specified and directed. Note: Flushing cistern, flush pipe will be measured and paid for separately.
M&L Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified complete all as speicified
S & F flushing cistern, 10 Ltrs. Capacity, PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including bracketscomplete all as specified and directed.
S&F in PVC connections 15mm size with PTMT nuts of length 450mm, complete all as specified and as directed.
S&F two way Bib cock of Pryag make Cat No SQT-512 ANKN or of ESSCO or equivalent of Marko ,Parko as approved by the GE complete all as specified and directed.
S&F in repairs Vitreous China white, 1st quality, wash hand basin, flat back, size 550mm x 400mm including mild steel angle brackets,CP brass fittings, waste, union, 32mm dia PVC waste pipe, cutting for and pinning ends of brackets, complete all as specified and directed .
M&L 32 mm dia Low density polyethylene (LDPE) pipes of pressure rating 6kgf/sq. cm all as specified and directed.
S&F 15mm bore brass CP pillar tap, Make ESSCO Cat No MQT-507 or equivalent of make Parko as approved by the GE, complete all as specified and directed.
S&F 15mm bore brass CP Stop Valve, Make ESSCO Cat No MQT-513 A or equivalent of make Parko/ ZOLOTO as approved by the GE, complete all as specified and directed.
S&F 15mm bore brass CP Bib Tap, Make ESSCO Cat No MQT-511 or equivalent of make parko as approved by the GE, complete all as specified and directed.
S&F in repairs brass chromium plated, shower rose, 125mm size with and including 195mm long 15mm bore brass chromium plated shower arm with bend of 45 degree, complete all as specified and directed.
S&F in repair Grating doom 125 mm dia with waste hole of PTMT (Minimum Weight 25 gram), complete all as specified and directed.
Taking up or down steel water tubing and connections of size 15mm bore, complete all as specified and directed.
Taking up or down steel water tubing and connections of size 20mm bore, complete all as specified and directed.
Taking up or down steel water tubing and connections of size 25mm bore, complete all as specified and directed.
Supply & fixing 15mm bore GI tubing, medium grade with and including all fittings and fixed to walls and ceilings or laid in floors, complete all as specified and as directed.
Supply & fixing 20mm bore GI tubing, medium grade with and including all fittings and fixed to walls and ceilings or laid in floors complete all as specified and as directed.
Supplying and laying 16mm bore of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. and as directed.
Supply & fixing 25mm bore GI tubing, medium grade with and including all fittings and fixed to walls and ceilings or laid in floors complete all as specified and as directed.
S & F of 75 mm bore PVC (SWR) soil, waste, ventilating rain water pipe type 'A', single socketed, (ISI Marked) in any length with and including ruber ring joints, complete fixed to wall with necessary PVC standard stay clamps etc, including taking down existing SWR pipes(including fittings) of any description, complete all as specified and directed.
S & F 110 mm bore PVC (SWR) soil, waste, ventilating, rain water pipe type 'A', single socketed, (ISI Marked) in any length with and including ruber ring joints, complete fixed to wall with necessary PVC standard stay clamps etc, including taking down existing SWR pipes(including fittings) of any description, complete all as specified and directed.
S&F 75mm bore PVC (SWR) branch piece single (Single Y), equal or unequal with and including rubber ring joints, complete all as specified and directed.
S&F 110mm bore PVC (SWR) branch piece, single (single Y), equal or unequal with and including rubber ring joints, complete all as specified and directed.
S&F 75 mm bore PVC (SWR) Bends with and including oval access door and also including rubber ring joints, complete all as specified and directed.
S&F 110 mm bore PVC (SWR) Bends with and including oval access door and also including rubber ring joints, complete all as specified and directed.
S&F cast iron Nahani trap with 75mm dia out let including grating, connecting, jointing to waste pipe with lead joints, also including embedding the same in PCC 1:2:4 type B-1 (using 20mm graded stone aggregates) mixed with water proofing compound in the proportion as recommanded by the manufacturer(s), taking out existing unserviceable traps by hacking out concrete joints and making good of surfaces, complete all as specified and as directed .
M & L for filling of lean concrete 1:5:10 type E2 (using 40 mm graded stone aggregates ) for filling in sunken portion, as per requirement, complete all as specified and directed.
M&L for PCC 1:2:4, type -B-1, using 20mm graded stone aggregated as in sub base of sunkun floor mixed with WPC in the proportion as recommanded by the manufacturer(s), complete all as specified and directed, (Note : WPC will be measured and paid separately as supply only).
Material and labour for rendering 15 mm thick rendering in CM 1:4 mixed with WPC in the proportion as recommanded by the manufacturer(s), over top of sunken floor, roof surfaces etc, finished even and fair, complete all as specified and as directed Note: WPC shall be measured and paid as "supply only" separately.
M&L for applying evenly a tack coat of industrial bitumen 85/25 grade @ 1.20 Kg/Sqm including cleaning the surfaces over newly plastered surfaces of sunken portion, complete all as specified and directed.
Supply only intergal water proofing compound, complete all as specified and directed.
S&F 20 mm dia brass chromium plated tubular towel rail 'D' type 600 mm long between flanges, complete all as specified and directed.
Dismantling existing water tanks of capacity exc 250 ltrs and not exc 500 ltrs, complete all as specified and directed
Supplying and fixing rotational moulded polythylene water storage tanks, double layered (ISI marked) of 500 litres capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I, including provision of necessary fittings for connecting the overflow, drain out, inlet and outlet pipes, complete all as specified and as directed.
S&F in repairs gunmetal gate valve, ISI marked with iron wheel head, screwed at both ends for iron pipe or ferrule of 25mm bore and provision of necessary fittings like unions, check nuts, etc, complete all as specified and as directed.
S&F in repairs 20mm dia Harrison rails, mild steel, chromium plated, curtain rails with and including fixing brackets, stops, rollers etc, complete all as specified and directed.
Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortor of any dia, complete all as specified and directed.
M&L for Salt Glazed, Stoneware, Drain pipes of 150mm bore, grade 'A', laid in trenches and jointed, complete all as specified and directed, Note: Excavation & earth work and PCC for bedding & haunching shall be measured and paid for separately.
M&L for 100mm thick concrete bed in cement concrete 1:3:6 type C-2 (using 40mm graded stone aggregate) for 150mm bore pipes including packing under and haunching against the sides of pipes after they are laid and tested etc, complete all as specified and directed.
Excavation in trenches not exc 1.5m wide and not exc 1.5m in depth for pipes, foundation etc and 10 Sqm on plan and not exc1.5 metre in depth for pits, independent holes etc, including getting out in any type of soil, complete all as specified and directed.
Returning, filling in with approved earth including spreading, levelling, watering, well ramming in layers n exc 25 cm thick, complete all as specified and directed.
Removing excavated material/soil to a distance not exceeting 50 metre and depositing where directed at a level not exc 1.5 metre above the starting point, complete all as specified and directed.
Chipping, removing carefully loose/damaged concrete including plastering (total thickness upto 40mm ) from surfaces of RCC members, in any location by low impact Hammer/Breakar without damaging the structure & cleaning the surfaces with wire brush etc and disposal of debris out side MOD land complete all as specified and directed. Note : 1) Hard concrete shall not be removed by force
M&L for cleaning existing reinforcement with wire/ rotary wire brush to a shining bright finish, making the surfaces free from loose material, dirt etc complete and applying two coats of alkaline rust converting primer conforming to ASTM-B-117 of make. "Feovert" of "Krishna Conchem" OR "Roff Rust Cleaner' of 'Pidilite' OR 'Shali Rustoff' of 'STP Ltd', on rebars with time interval of 1 hour between the coats, complete all as specified and directed. (Note :- Mode of measurement: superficial area of concrete will be measured.)
M&L for Anticorrosive Treatment to Reinforcement using Corroseal - ZR of M/s Krishna Conchem or Epoxy Zinc Primer of M/s. Dr. Fixit by application on exposed reinforcement in two coats with time interval of minimum 4 hours between each coat. The application shall be done by brush after cleaning/wire brushing to the exposed steel surfaces complete all as specified and directed . Note :- Mode of measurement: superficial area of concrete will be measured.
M&L for providing additional mild steel TMT bars in various structural RCC members like column, beams and Slab etc. including cutting, bending, fixing the bars, tying with and including binding wire etc., complete all as specified and directed.
M&L for shear connectors of 8mm dia TMT bars including anchoring of the reinforcement bars in existing RCC member by providing holes of minimum 10d depth and grouting in position with locfix (fosroc), including drilling of holes, cleaning and other relevant works, complete all as specified and directed.
M&L for Epoxy bond coat of Make Fosroc (NITOBOND-EP) OR EPOXY BONDING AGENT of Dr. Fixit OR equivalent of M/s. Krishna Conchem as approved by GE over exposed concrete surfaces prior to application of any type of mortar to ensure bond between old concrete & new concrete / mortar by brush application, complete all as specified and directed.
M&L for casting & repairing of excessively damaged distressedRCC members with prebatched, prepacked, single component ready to use microconcrete from M/s. Krishna Conchem Molith MC) or equivalent of Dr. Fixit as approved by GE at any level and at any lead or lift as directed including scaffolding , also including mixing , laying, levelling, finishing, curing etc as per manufacturer's specifications complete all as specified and directed.(Note : Reinforcement & formwork shall be only shall be measured and paid separately).
M&L for building up the profile of structural members using polymer modified mortar from M/s. Krishna Conchem (Molith PMM) OR Polymer mortar HB of Dr Fixit, while the bonding agent is still tacking upto 20mm thickness, including levelling, profiling , formworking ,scaffolding etc, complete all as specified and directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for etc, complete all as specified and directed.
S/F framed work such as grills, gratings, etc. with ends of bars shouldered and / or riveted or forged into spikes: framed guard bars : barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290-0 Gde E -165
M/L preparing new steel surfaces of any description exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zink chrome
Demolition of cement concrete of any description and in any position not otherwise specifically provided for and removing the retreived debris out side MD land, complete all as specified and directed.
M&L Hardcore of gauge not exc. 63mm, deposited, spread and levelling in layers not exc. 15 cm thick, watered and rammed to true surface with broken stone or boulder:
M&L100 mm thick Cement Concrete in sub base of floors type D-2, PCC 1:4:8 ( 40mmgraded aggregate) complete all as specified and directed
M/L75 mm thick Cement Concrete in sub base of floors type D-2, PCC 1:4:8 ( 40mmgraded aggregate )
M&L for coloured Parking tiles, heavy duty of size 300x300x10 mm thick, set and jointed in neat cement slurry and pointed in white cement mixed with pigments to match the colour of the tiles, over and including 15mm thick cement mortar screed bed in CM 1:6, complete all as specified and directed. Make : JOHNSON /SOMANI/ORIENT BELL/KAJARIA.
M & L for PCC 1:3:6 type C2 using 40mm graded stone aggregate as in foundation filling .
M&L Pre-cast cement concrete block masonry with solid blocks, exc. 10 cm in width and setting CM 1:6 in mortar ,Type B1,1:3:6,(20mm graded aggregate) complete all as specified and directed.
Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering
M&L for Reinforced Cement concrete work in pavement/hard-standing of flexural strength 40kg/per square centimetre in field using minimum cement content as 320 kg of cement per cubic metre, thickness of concrete 100mm
Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 5cm but n exc 10cm wide
M&L for TMT bars 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips
M&L rendering 15 mm thick on fair faces of brick/concrete surfaces in CM(1:6) finished even and smooth with out using extra cement
M&L mild steel bolts , purpose made with hexagonal or square head one end and screwed the other , or screwed both ends each screwed end to be fitted with washer and one hexagonal or squrare nut , exc 30 cm long 700 mm long GR 8.8 hexagonal head black bolt with two nut and washers for each bolt complete all as directed and specified . (make Hilti or equivalent )
Fixing only of MS stays over the hardstanding floor , supplied by User all as specified and directed by Engr in charge.
Taking down copper/ aluminum point wiring surface type, concealed/ casing caping type, (Light/Fan/Socket or power) complete including fixtures and fittings such as switches, ceiling roses, pendants, regulators, socket, light fitting etc. Removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces to walls floors etc complete all as specified and directed.
Taking down of Old u/s worn out MCB DB of any size with its components complete all as specified and directed.
Taking down u/s worn out wiring any size complete all as specified and directed.
M & L for point wiring complete with proper colour coding using, 1100 Volts grade, 1.5 Sqmm, PVC insulated HR-FRLS, unsheathed wire with multi stranded copper conductor confirming to IS-694, Part II, ISI marked drawn in and including pvc casing caping (minimum 20mm width) etc with all accessories, fittings, PVC junction boxes etc, sunk pressed steel boxes not less than 1.6 mm thick, 50 mm deep terminal boxes covered with 3mm thick plastic laminated sheet top cover fastended with chromium plated brass screws, also including 1.5 Sqmm, PVC insulated, FRLS, unsheathed, 1100 Volts multistranded copper conductor green colour as continuous earth wire connected to common earth dolly all as specified and directed for one light point /fan/bell point controlled by one one way switch, complete all as specified and directed.
-Ditto- all as per item No 110 above but for one 5A 2pin/3pin socket out let multipurpose on the same board with other switches.
-Ditto- all as per item No110 here-in-before but for one 5A 2pin/3pin switch socket out let multipurpose on independent Board.
All as per item No. 110 here in before but wiring complete with 2.5 Sqmm for 3 pin 15A socket multipurpose on independent board
S&F Switch Piano 5 Amps, 230 Volts, one way, flush type, ISI marked, conforming to IS-3854 complete all as specified and directed.
S & F Bell push flush type 5 amp, 230 Volts, conforming to ISI duly markedcomplete all as specified and directed.
S&F Switch Socket combination 2 in 1 , 5 Amps, flush type, 5 Pin, 230 Volts, ISI marked, conforming to IS-3854 complete all as specified and directed.
S&F Switch Socket combination 2 in 1 , 5/15 Amps, flush type, 6 Pin, ISI marked, conforming to IS-3854 complete all as specified and directed.
S&F ceiling rose three terminal, 230 Volts PVC / Polycarbonate body, conforming to ISI duly marked complete all as specified and directed.
S&F fan regulator, electronic stepped (5 step), 230 volts, 100 watt, flush type and connecting-up,ISI marked complete all as specified and directed.
Supply and fix bell ding dong AC 230 V single pole conforming to ISI duly marked, complete all as specified and directed.
S & F in repair 20-22 Watts capacity surface/wall mounted LED batten having high efficiency long life LED chips with luminous efficacy of > 100 lumen/W, CCT 4000K to 6500K, independent isolated SMPS based constant current electronic LED driver with THD < 20%, CRI > 80,Lamp burning capacity not less than 50,000 hrs and other safety tests as per IS: 15885 (Part-2/Sec-13): 2012, polycarbonate diffuser, housed in powder coated white extruded aluminium channel housing and white coloured ABS end caps having input voltage 220- 240 V, input frequency 50- 60 Hz, PF > 0.95, including electrical connection with 3 core flexible Cu conductor PVC insulated cable of appropriate size from ceiling rose to the fixture complete all as specified and directed.Make : BAJAJ/JAQUAR/WIPRO Note : "LM 79 & LM 80 Test certificate from NABL certified Lab shall be submitted by the contractor for LED luminaire along with warranty certificate for 3 years
S & F in repair 10-12 Watts capacity surface/wall mounted LED batten having high efficiency long life LED chips with luminous efficacy of > 100 lumen/W, CCT 4000K to 6500K, independent isolated SMPS based constant current electronic LED driver with THD < 20%, CRI > 80,Lamp burning capacity not less than 50,000 hrs and other safety tests as per IS: 15885 (Part-2/Sec-13): 2012, polycarbonate diffuser, housed in powder coated white extruded aluminium channel housing and white coloured ABS end caps having input voltage 220- 240 V, input frequency 50- 60 Hz, PF > 0.95, including electrical connection with 3 core flexible Cu conductor PVC insulated cable of appropriate size from ceiling rose to the fixture complete all as specified and directed. Make : BAJAJ/ JAQUAR/ WIPRO Note : "LM 79 & LM 80 Test certificate from NABL certified Lab shall be submitted by the contractor for LED luminaire along with warranty certificate for 3 years
Supply & fix Heavy Duty metallic Exhaust fan high speed type of sweep 300 mm, speed 1400 RPM, air delivery 1300CMH, power 70W (approx) comprising of double ball bearing, blades,louvers complete mounting anchor fasteners, aluminium louvers made of aluminium sheet of 0.5 mm thickness, provision of three core 1.5 Sqmm PVC insulated copper cable from ceiling rose to fan etc complete all as specified and directed. Make-:Crompton/ Orient/ Almonard/ Bajaj Note -: The Contractor shall submit 1 years warranty certificate from OEM of exhaust fan.
Taking down old unserviceable ceiling fan 1200 mm sweep by disconnecting the electric power supply, unscrewing the bolts and nuts, removing the blades and transporting to workshop to undertake repairs by rewinding of burnt out winding using suitable gauge copper wire, replalcement of worn out capacitor 2.5 mfd - 01 No., PVC canopy - 02 No's and bearing including scrapping of old paint and applying two coats of synthetic enamelled white paint over a coat of red oxide primer complete and refixing back at site complete all as directed.
S & F in repairs MCB DB 8 way SPN, double door, IP - 53 with 200 Amps rated bus bar, AC and connecting up complete all as specified.
S & F MCB, SPN, 40 Amps, 240 Volts, 10 KA Breaking capacity, C-series, conforming to IS duly marked complete all as specified and directed.
S & F MCB, SP, 05 to 32 Amps, 240 Volts, 10 KA Breaking capacity, C-series, conforming to IS duly marked complete all as specified and directed.
Supply and fixing in reapir LED street light fitting 60-65 Watt 230 V AC outdoor type with high pressure die cast aluminum housing along with prismatic polycarbonate modular secondary lens optic with IP66 ingress protection having 4 kv in built and 10 kv external surge protection with top opening driver cover for easy maintenance, efficacy not less than or equal to 110 lm/W, CCT 5700K/ 6500K THD <10%, CRI >80, Lamp burning capacity not less than 50,000 hrs, lamp bracket with impact and corrosion resistant including thermal management in multiple optics including MS clamps,bolts, nuts, washers, anchor fastners etc suitable for fixing security light of Cat No -: ENXT P 72L WH PO PC SD of Bajaj or equivalent from philips/Jaguar/ wipro/ CG, complete all as specifed and as directed.
S & F in replacement of GI steel tubing medium grade 40 mm dia and length up to 1.5 meter bent to shape of offset angle upto 45degree for fixing of security /street light fittings including MS clamps made of 32mm x5mm flat iron, nuts , bolts, etc all as directed by Engineer in charge
Supply and Laying or fixing or passing through pipe, XLPE/PVC insulated, armoured heavy duty electric cable with aluminium conductor 1100 volts grade cross sectional area 10 Sqmm 4 core including necessary connection and providing cable lugs as required including disconnection/taking down of existing cable all as specified. Make-: Havells/ Gloster/ KEI
M & L in repair for earthing complete with galvanised steel earth plate electrode size 60cm x 60cmx 6mm thick burried directly in ground vertically to a depth not less than 2.25 metres below ground level with top edge of earth plate at a depth not less than 1.5 metre below ground level, connected to galvanised iron or steel, earth lead 4mm size by means of nuts, bolts check nuts and washers made of galvanised iron or steel, earth wire protected by galvanised iron pipe 15mm bore, medium grade and connected to main switch board or main control board as directed and including concrete pit in PCC 1:3:6 type C-1(using 20 mm graded stone aggregate), pre-cast RCC cover slab 30 cm x 30 cm x 10 cm with one lifting handle made of 8 mm dia MS bar funnel wire mesh, 20 mm bore galvanised iron or steel pipe medium grade for watering charcoal or coke and salt in alternate layers, necessary excavation and earth work in any type of soil complete all as shown in electrical Plate No 5 of MES Schedule Part- I and testing on completion. Note : A sum of Rs 18,917.50 towards sch of credit shall be deducted to arrive the contract sum.
sahajanand const co.
ORIENT ELECTRIC CO
mp construction co
AM ENTERPRISES
Parmatma Enterprises
M/s Mohd Altaf Hanif Qureshi
HINDUSTAN BUILDERS
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .