SPECIAL REPAIRS TO BLDG NO P 04 2 AND 4 UNDER AGE I DARJEELING

Amount

Dismantling Plain or Corrugated steel and FRP Sheeting of any gauge and thickness as in Roofing including Ridge, Nainital or Similar Pattern Roof Coverings, complete all as specified and as directed.

Dismantling Wall and Ceiling Boards (Fibre, Pulp, Insulation etc.) or Insulation Board/Slab/Blankets of any thickness, etc. including Cover Fillets of any description, complete all as specified and as directed.

Dismantling Timber Scantlings 40 Sq Cm and Over in Section as in Unframed work, in any position, complete all as specified and as directed

Taking down Chowkat or Frame (without taking off Shutter from the Frame) not exc. 1.50 Square Metre Each, complete all as specified and as directed.

Taking down Chowkat or Frame (without taking off Shutter from the Frame) exc. 1.50 Square Metre but not exc. 4.00 Square Metre Each, complete all as specified and as directed.

Taking down Shutter of any description not exc 1.0 Square Metre Each, complete all as specified and as directed.

Taking down Shutter of any description exc. 1.0 Square Metre and not exc. 2.0 Square Metre Each, complete all as specified and as directed.

Taking down Cement Plaster of any description on Brick Walls, Concrete Surfaces including racking out joints, hacking for key, scrubbing down with Water, remove Dust, debries/ rubbish etc., complete all as specified and as directed.

Taking down old steel tubing 15mm bore (dia) and connections, including cleaning and removing from site of work complete all as specified and as directed.

Taking down old steel tubing 20mm bore (dia) and connections, including cleaning and removing from site of work complete all as specified and as directed.

Dismantling Floor, Hearth or Wall Tiling including Cement Mortar Bedding (but not backing), removing from the Sites and rubbish off the Premises, complete all as specified and as directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and as directed.

S&F Pre-painted Galvalume Aluminum Zinc Coating GI based Corrugated Steel Sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering, fixed with self tapping screws as specified, complete all as specified and as directed.

All as per Item No.-13 here in above, but Plain sheeting, complete all as specified and as directed.

M&L for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165, complete all as specified and as directed.

M&L Second Class Hardwood Plain, Solid, Straight Chowkats and Frames, Wrought, Framed rebated on the Solid, Rounded or Chamfered, put together with Glue, Pinned at Joints, complete all as specified and as directed.

S&F Factory made 35mm thick, 2nd class hardwood plain framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers, supplied and fitted to chowkhats complete all specified and as directed.

M&L Factory Made Second Class Hardwood 35mm thick Glazed and Skelton Shutters, open rebated and prepared to receive Glass, Gauze, etc. (without Sash Bars) edges of Framing plain, chamfered or rounded, mitred beads for screwing Glass, Gauge, etc. sizes of members of Shutter as speci fied in MES Schedule Part-I Section 8, Clause No. 8.24(a) and fitted to Wooden Chowkat, complete all as specified and as directed.

M&L Factory Made Second Class Hardwood 30mm thick Glazed and Skeleton Shutters, open rebated and prepare to receive Glass, Gauge, etc. divided into Squares with Plain Chamfered or Rounded, mitred Sash Bars of any Numbers, Edges of Framing plain chamfered or rounded fitted with cut and mitred Beads for securing Glass, etc sizes of members of Shutter as specified in MES Schedule Part-I Section 8, Clause No. 8.24(b) and fitted to Wooden Chowkat, complete all as specified and as directed.

S&F of Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded, complete all as specified and as directed.

S&F of Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded, complete all as specified and as directed.

S&F Solid PVC Door Frame of size 50x47mm made out of 5.0mm plain colour PVC Sheet reinforced with Mild Steel Square Tube, and fixing in Opening as per Specifications and Drawing, complete all as specified and as directed.

S&F Factory Made Solid Panel PVC Door Shutter 30mm thick (style) consisting of frame made out of Mild Steel Tubes for Top & Bottom Rails having Mild Steel Frame shall be covered with heat moulded plain colour PVC ‘C’ Channel having a PVC Sheet Strip of 20mm width stuck inside with Solvent Cement for Stiles and plain colour PVC Sheets for Top Rail, Lock Rail & Bottom Rail on either side and as gap insert for Top Rail & Bottom Rail; Panelling of plain colour PVC Sheet to be fitted in the Mild Steel Frame welded/ sealed to the Stiles and Rails with suitable PVC Sheet Beading and joined together with Solvent Cement and fixing in the Frame at Site as per Specifications and Drawing, complete all as specified and as directed.

S&F Mild Steel Butt Hinge of size 100mm long (medium weight) and fixed with screws, complete all as specified and as directed.

S&F Mild Steel Butt Hinge of size 75mm long (medium weight) and fixed with screws, complete all as specified and as directed.

S&F Aluminium Alloy Handle 125mm long Febricated type, Extruded Section and fixed, complete all as specified and as directed.

S&F Aluminium Alloy Handle 150mm long Febricated type, Extruded Section and fixed, complete all as specified and as directed.

S&F Aluminium anodised Barrel Tower Bolt 150mm long, Extruded Section and fixed, complete all as specified and as directed.

S&F Aluminium anodised Barrel Tower Bolt 125mm long, Extruded Section and fixed, complete all as specified and as directed.

M&L Cement Concrete 1:2:4 (20mm graded aggregate) as in Kerbs, Coping, Hold fast blocks etc. Chamfered Edges including use and waste of Form-work as required/ordered at Site(s), complete all as specified and as directed.

M&L Mild Steel Flat Iron 25x3 mm as in Holdfast size for Door, Window Frames or Chowkat, straps, wind tie etc., cut to length or drilled hole and fixed with screw, etc. grade of Steel conforming to Fe-290 Gde E-165, complete all as specified and as directed.

S&F Sheet Glass, ordinary quality, 3.0mm thick, Square or Rectagular, area not exc. 0.50 Square Metre in Each Pane and fixing to wooden/steel Shutters, etc. with oil putty or beading, complete all as specified and as directed.

S&F of Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.00mm and fixed with tinned tacks, or galvanised wire staples, complete all as specified and as directed.

M&L preparing previously untreated Surfaces of Wood and Wood Based Materials of any description and girth not otherwise described and treating with Tar or Coal Tar Black Paint to Backs of Chowkats, etc. Area tarred exc. 0.10 Sqm but not exc. 0.50 Sqm Each including Sanding with clean sharp Sand after tarred complete all as specified and as directed.

M&L preparing previously untreated Surfaces of any description and girth not otherwise described and treating with Tar or Coal Tar Black Paint to Holdfast or Similar Small Items area tarred not exc. 0.10 Sqm Each including Sanding with clean sharp Sand after tarred, complete all as specified and as directed.

S&F Aluminium snap grid frame work for false ceiling size of grid 605 x 605 mm all as specified and as directed.

S&F 4mm thick non asbestos cement plain building boards, fixed to aluminium/ timber frame work with screws as in ceiling complete all as specified and as directed.

M&L second class hard Wood as in scantlings, timber fixed work clean swan complete all as specified and as directed.

M&L Rendering (Internally) 15mm thick in Cement Mortar 1:6 on Fair face of Brick Walls or on Concrete Surfaces, plastered surfaces finished Even and Smooth without using Extra Cement, complete all as specified and as directed.

M&L Rendering (Externally) 15mm thick in Cement Mortar 1:4 in two layers on Brick Walls/Concrete Surfaces, 5mm thick top layer mixed with WPC as per Manufactures instruction, plastered surfaces finished Even and Smooth without using Extra Cement, complete all as specified and as directed. NOTE: WPC shall be Measured and Paid as ‘Supply only’ under relevant Item.

M&L Rendering 5mm thick in Cement Mortar 1:3 on Concrete Surfaces as in Ceiling, etc., plastered surfaces finished Even and Fair, complete all as specified and as directed.

Supply only Integral Water Proofing Compound(WPC), conforming to IS-2465:1975 and as approved, complete all as specified and directed.

M&L for Screed Bed or Bedding Layer 20mm thick in Cement Mortar 1:6 for laying Floor Finishes/Tiles, complete all as specified and as directed.

M&L for Rendering or Bedding Layer 10mm thick in Cement Mortar 1:3 on Walls, etc. for fixing Tiles as Skirtings, Dados, etc, complete all as specified and as directed.

M&L for providing non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exc 0.11 Sqm but not exc 0.18 Sqm, in floors etc set and jointed neat cement slurry and pointed in white or coloured cement to match complete all as specified as directed. Note - Screed Bed will be measured and paid separately under appropriate Item.

M&L Glazed Ceramic Tiles 300x200x7mm thick in Vertical Surface i.e. Dado, Skirting, etc., Set and Jointed in Neat Cement Slurry and pointed in White or Colour Cement to match the Tiles, complete all as specified and as directed. NOTE : Screed Bed will be measured and paid separately under appropriate Item.

M&L for preparing old treated/decorated Plastered/Unplastered Surfaces of Walls including brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying One Coat of White wash, complete all as specified and as directed.

All as per Item No. 47, here-in-above but on Ceiling, complete all as specified and as directed.

All as per Item No. 47, here-in-above but applying Two Coats of White wash on walls, complete all as specified and as directed.

M&L preparing Old Wood and Wood Based Surfaces of any description, not otherwise described, over 10 Cm width or girth and applying Two Coats of Synthetic Enamel Paint (1st Quality) over a coat of Pink primer, complete all as specified and as directed.

M&L preparing new Wood and Wood Based Surfaces of any description, not otherwise described, over 10 Cm width or girth and applying Two Coats of Synthetic Enamel Paint (First quality) over a coat of pink primer, complete all as specified and as directed.

M&L for preparing newly plastered surfaces of Walls and applying Two Coats of Oil Bound Distemper over a coat of Chalk Whitening, complete all as specified and as directed.

M&L for preparing newly plastered surfaces of Walls and applying Two Coats of Exterior Weather coat paint over a coat of Cement primer, complete all as specified and as directed.

M&L preparing newly plastered surfaces of Ceiling and applying Three Coats of White Wash, complete all as specified and as directed

M&L Complete removal of existing Surface Treatment by washing rubbing down and stopping of old decorated/treated surfaces of Walls and applying Two Coats of oil bound distemper, complete all as specified and as directed.

M&L Complete removal of existing Surface Treatment by washing rubbing down and stopping of old decorated/treated surfaces of Walls and applying Two Coats of Exterior Weather coat paint over a coat of Cement primer, complete all as specified and as directed.

Supply and fix in-repair Bib Tap 15mm bore (dia), Cast Copper Alloy with Crutch or Butter-fly Handle, Fancy type, chromium plated, screwed down, screwed for Iron Pipe or for Brass Ferrule and fixed, complete all as specified and as directed.

Supply and fix in-repair Stop Valve 15mm bore (dia), Cast Copper Alloy, Chromium Plated, (Consealed Type), screwed down, high pressure, with Crutch or Butter-fly Handle, screwed both Ends for Iron Pipe or for Unions and fixed, complete all as specified and as directed.

Supply and fix in-repair Pillar Tap 15mm bore (dia), Cast Copper Alloy, Fancy type, Chromium Plated with Capstan Heads, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed Shanks and Fly-nuts, screwed for Iron Pipe and fixed, complete all as specified and as directed.

Supply and fix in-repair of Brass Chromium Plated Tubular Towel Rail, 20mm dia, 'D' Type, 60 cm long between flanges with bracket and fixed to Walls with Chromium plated Brass Screws, complete all as specified and as directed.

S&F in repair cast iron floor trap 100mm dia with grating incl jointing to waste pipe in cement concrete 1:2:4 type B-1 complete all as specified and as directed.

S&F in repair, Vitreous China Wash Hand Basin 550x 400mm in size, White (Flat Back or Angle Back Type) with 32mm dia Brass Chromium Plated Waste Fitting, a Pair of Cast Iron Brackets duly Painted/ Erecting Stand including Cutting and Pinning in Ends, Making Good disturbed Surfaces in Cement Mortar 1:3, complete all as specified and as directed.

S&F in repair Vitreous China White Squatting Pan (Orissa Pattern) of size 580x440 mm with integral foot rests, 'P' or 'S' Trap and (excluding Flushing Cistern and Flush Pipe) including connection to drain (or outgoing pipe) and to Flushing Pipe, Anti-syphonage Pipe, etc. and Making Good to Floor /distrubed surfaces and fixed-in-repair, complete all as specified and as directed.

Supply and fix in repair PVC Flushing Cistern 10 Litre capacity White, Low Level, Valve less, Syphonic Action type with Inlet, Ball Valve, Float and Handle, a pair of Cast Iron Brackets Erecting Stand duly painted including cutting and pinning in Ends, making good disturbed surfaces in Cement Mortar 1:3, complete all as specified and as directed.

S&F in repair, Stainless Steel Sink with Drainage Board l.0mm thick Over-all size 915x460mm and Bowl size 410x330x160mm for Kitchen or Laboratory with Plugs, Washers, Waste Fitting 32mm bore (dia) of Brass Chromium Plated, a Pair of Cast Iron Brackets duly Painted/ Erecting Stand including cutting and pinning in Ends, making good disturbed Surfaces in Cement Mortar 1:3, complete all as specified and as directed.

S&F in-repair of Flexible Waste Pipe 32 mm bore dia (bore) 1150 Cm long for Wash Hand Basin, Sink, etc., complete all as specified and as directed.

S&F in-repair of PVC Connection Pipe 15mm size with PTMT Nuts of length 450mm, complete all as specified and as directed.

Supply & laying Steel Water Tubing 15mm bore (dia), Galvanised, ‘medium grade’ with all Fittings, fixed on Walls, Ceiling or laid in Floors or any other situation, complete as all specified and as directed.

Supply & laying Steel Water Tubing 20mm bore (dia), Galvanised, ‘medium grade’ with all Fittings, fixed on Walls, Ceiling or laid in Floors or any other situation, complete as all specified and as directed.

M&L for Cutting chases in brick wall not exc 10 cm girth for concealed water tubing or concealed conduit wiring, etc. and making good to facings where required and pointing in cement mortar 1:3 to walls, complete all as specified aand as directed.

S&F PVC (SWR) half round gutters drain pipe 180mm bore , fixed to eave board with necessary fixing arrangement , complete all as specified and as directed.

S&F 180mm PVC (SWR) joint tee with end cap as in gutter drain pipe complete all as specified and as directed.

S&F 180mm PVC (SWR) pipe clamp as in gutter drain pipe complete all as specified and as directed.

S&F PVC (SWR) pipe single socketed in any length fixed to wall 110mm bore with rubber ring joint complete all as specified as directed.

S&F PVC (SWR) bends 110mm bore (any radious), jointing with solvat cement, complete all as specified.

Taking down carefully existing old unserviceable Copper/Aluminium Point Wiring (Light, Fan, Socket or Power) of any description on batten/conduit (Serviceable Fittings such as Switches, Ceiling Roses, Pendants, Fan Regulators, Sockets, Light Fitting, etc. to be kept in safe custody for reuse) and making good disturbed surfaces of Ceiling, Walls, etc. with Cement Morter 1:3 and treating the surfaces so as to match the existing Finishes complete all as specified and as directed.

Taking out/down burnt/unserviceable Main Switches, Cut out, DB's, Bus-bars Chambers including all Fittings & Fixtures, etc. from existing Main Board and making good disturbed surfaces of Walls, Ceiling, etc. so as to match the existing Finishes, complete all as specified and as directed. NOTE : Quoted Unit Rate against DB's will deemed to be included for taking out/ down of MCB SP/SPN/ TPN.

Taking down old unserviceable/burnt Submain Wiring with copper /aluminum conductor PVC insulated cable of any size drawn through PVC Casing Caping/Conduit including GI Wire Accessories etc. and making good disturbed surfaces of Walls, Ceiling, etc. so as to match the existing Finishes, complete all as specified and as directed.

M&L for Point Wiring with 1.5 Sqmm Copper Conductor single core PVC insulated FRLSH unsheathed 1100 Volt grade multi-stranded Cable drawn through and including PVC Casing & Caping of suitable size and its Accessories such as Elbow, bends, junction boxes, saddles and screws and rawalplug etc on Wall, Ceiling, mounted including PVC insulated FRLSH unsheathed single core multi-stranded Copper Conductor Cable of size 1.5 Sqmm Green in Colour as Earth Continuity Conductor connected to Common Earth and Earth dolly for One Light/ Fan/ Bell Point controlled by One 1-Way Switch 5 Amp, complete all as specified and as directed.

All as per Item no 78 here-in-above, but for One Light point controlled by two nos 2-way 5 Amp switch, complete all as specified and as directed.

All as per Item no 78 here-in-above, but for One Socket outlet of 3/5 Pin, 5/6 Amp on Same Board, complete all as specified and as directed.

All as per Item no 78 here-in-above, but for One Socket outlet of 3/5 Pin, 5/6 Amp on Independent Board, complete all as specified and as directed.

All as per Item no 78 here-in-above, but wiring with 2.5 Sqmm Copper Conductor for One Socket outlet of 3/5 Pin, 15/16 Amp on Independent Board, complete all as specified and as directed.

S&F Switch Piano, Flush type, Single Pole, 1-Way, 5 Amps, 240 Volt, conforming to IS and connecting up, complete all as specified and as directed.

S&F Switch Piano, Flush type, Single Pole, 2-Way, 5 Amps, 240 Volt, conforming to IS and connecting up, complete all as specified and as directed.

S&F Bell push, flush type, 5 Amp, 240 volt complete all as specified and as directed.

S & F Bell Ding-Dong AC 240 V Single Pole complete all as specified and as dircted.

S&F Socket Outlet 2-in-1, Flush type, multi-purpose, 2/3 Pin, 5/6 Amp, 240 Volt, conforming to IS and connecting up, complete all as specified and as directed.

S&F Switch Socket Combination 2-in-1, Flush type, multi-purpose, 5 Pin, 5/6 Amp, 240 Volt, conforming to IS and connecting up, complete all as specified and as directed.

S&F Switch Socket Combination 2-in-1, Flush type, multi-purpose, 5/6 Pin, 15/16 Amp, 240 Volt, conforming to IS and connecting up, complete all as specified and as directed.

S&F Ceiling Rose, Surface Bakelite of size 65x50mm, 3 Terminals, AC, 50 Hz, 240 Volt, conforming to IS and connecting up, complete all as specified and as directed.

S&F modular power starter unit, 2-Module of capacity 16A, 240 Volt,AC, complete all as specified and as directed. Cat part no 6730 30 of Make Legrand or equivalent of Make- Havells/Anchor/Bajaj/ L&T/INDOASIAN

S&F Modular Socket Outlet, 3 Pin, Two Module, 25 Amp, 230 Volt, conforming to IS and connecting up, complete all as specified and as directed. Cat part no 6730 47 of Make Legrand or equivalent of Make- Havells/Anchor/Bajaj/ L&T/INDOASIAN

S&F PVC surface box with cover plate, 2-Module, complete all as specified and as directed. Cat part no for surface box 6733 02 and for cover plate 6732 42 of Make Legrand or equivalent of Make- Havells/Anchor/Bajaj

S&F in-repair Wall mounted LED 20 Watts, Decorative Light Fitting (4 Feet) with extruded Aluminium Heat Sink provided for Efficient Heat Dissipation, 240 Volts, complete with all Accessories internally pre-wired and necessary mounting arrangements, with and including of new 2 Core multi-stranded Copper Conductor of size 0.5 Sqmm from Ceiling Rose to Fitting including LED Tube 4'-20 Watts, complete all as specified and as directed. Make- HAVELLS, Cat Part No.- LHFXCENNTN1W020 & LHLDDCXCML8Q020 or Equivalent of Make BAJAJ/PHILIPS/CROMPTON GREAVES

S&F in repair Decorative ultra slim round profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient sleek LED mirror light fitting 09 watt complete all as specified and as directed by Engr -in- charge. Make : HAVELLS, Cat Pt No-LHEXBLP7IN1W009 or equivalent model of Philips/Bajaj/Crompton Greaves.

S&F in repair environmental friendly, ultra modern, energy saving, decorative oval bulk head edge-lit LED luminaire comprising of high brightness leds of 6.50 watt complete all as specified and as directed by Engr -in- charge. Make : Havells, Cat Pt No-LHEXCGP7IN5W006 or equivalent model of Philips/Bajaj/Crompton Greaves

M&L Sub-main Wiring with 2-Runs of Single Core 6.0 Sq mm PVC insulated FRLSH multi-stranded 1100 Volts grade with Copper Conductor drawn through and including Non-metalic Rigid PVC Casing capping ISI marked and its Accessories including 1-Run of Single Core 4.0 Sq mm PVC insulated FRLSH unsheated multi-stranded 1100 Volts grade with Copper Conductor Cable as Earth Continuty Conductor along with the Wiring and connected from DB to DB/Main Board, complete all as specified and as directed. NOTE :- (a) Cost of PVC Casing capping with all Fittings/Accessories will deem to be included in the quoted UNIT RATE. (b) Cables as mentioned in SCHEDULE ‘A’ Items and 1-Run of PVC Casing capping with all Fittings/Accessories will be measured and paid as ONE UNIT. (c) Sub-main Wiring will be measured PVC Casing capping only. Wire required for looping, etc as ordered will deem to be included in the quoted UNIT RATE.

M&L Sub-main Wiring with 2-Runs of Single Core 4.0 Sq mm PVC insulated FRLSH multi-stranded 1100 Volts grade with Copper Conductor drawn through and including Non-metalic Rigid PVC Casing capping ISI marked and its Accessories including 1-Run of Single Core 2.50 Sq mm PVC insulated FRLSH unsheated multi-stranded 1100 Volts grade with Copper Conductor Cable as Earth Continuty Conductor along with the Wiring and connected from DB to DB/Main Board, complete all as specified and as directed. NOTE :- (a) Cost of PVC Casing capping with all Fittings/Accessories will deem to be included in the quoted UNIT RATE. (b) Cables as mentioned in SCHEDULE ‘A’ Items and 1-Run of PVC Casing capping with all Fittings/Accessories will be measured and paid as ONE UNIT. (c) Sub-main Wiring will be measured PVC Casing capping only. Wire required for looping, etc as ordered will deem to be included in the quoted UNIT RATE.

S&F of Sheet Metal Enclosure MCB DB SPN, 8 way 240 volt, with rated Bus-bar, Double door type MCB DB suitable for mounting incoming and outgoing MCBs double pole/ single pole complete all as specified and as directed. Make of DB- Legrand of cat part No 5076 11 or Equivalent in L&T/ Schneider/ Havells

S&F MCB Single Pole & Neutral (SPN), 'C' Curve,40 Amps, 240 Volt for fixing on MCB DB’s, 10 kA, 50 Hz, conforming to IS/IEC 60898 and connecting up, complete all as specified and as directed. Make of MCB SPN 40 Amps Legrand cat part No 4086 18 or Equivalent in L&T/ Schneider/ Havells

S&F MCB Single Pole (SP), 'C' Curve, 6 to 32 Amps, 240 Volt for fixing on MCB DB’s, 10 kA, 50 Hz, conforming to IS/IEC 60898 and connecting up, complete all as specified and as directed. Make of MCB 6 to 32 Amps Legrand cat part No 4085 87 to 4085 95 or Equivalent in L&T/ Schneider/ Havells

RAI CONSTRUCTION

Darjeeling Enterprises

HIRA SINGH