CERTAIN MAINTENANCE WKS AT ZONE C UNDER AGE(I) CIF(R).

Amount

Taking down chowkhat or frame with shutter (without taking off shutter from the frame) exc. 1.50 Sqm but n exc. 4 Sqm each all as specified.

Pressed steel frames factory made for doors out of 1.25mm thick PBI sheet with one of more rebates including necessary flat iron lugs, hinges, lock strike plate, hinges etc complete, size of frame 125x60mm complete all as specified and directed

S & F 30 mm thick second class hard wood factory made plain, framed, panelled shutters (two numbers of panels) with lock rail and panel of 9 mm BWP commercials ply or 12 mm veneered particle board on both faces. The size of rails and size as per IS:1003 (Part-I), Kiln seasoned & chemically pressure treated, complete all as specified and directed.

S & F 30 mm thick second class hard wood factory made glazed and skelton shutters, open rebated and prepared to receive glass, gauge, etc. (without sash bars), edges of framing plain, chamered or rounded, fitted with cut and mitred beads for securing glass, etc. Size of memebers of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a) for doors, complete all as specified and directed.

S & F in repair floor door stopper of aluminium alloy body and tongue , anodised , with hard drawn steel spring, over all length of cover plate 140 mm , complete all as specified and directed.

S & F 100 mm long butt hinges, medium wight cold rolled mild steel, complete all as specified and directed.

S & F 125 mm extruded aluminium alloy handles, fabricated type, anodisedand, complete all as specified and directed.

S & F 150 mm aluminium anodised barrel tower bolt of extruded section and fixed,complete all as specified and directed.

S&F in repair 300 mm mild steel oridinary rat tail rod pattern springs including roller and roller plates, complete all as specified and directed.

S&F aluminium alloy, sliding door bolt 300 mm long with hasp, staple ( bolt type) and fixing clips of sheets, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed, all as specified.

S&F galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples including fixing with beads, nut bolts, welding, etc and removal of old from wooden or mild steel frame as in repairs complete all as specified.

Hacking out old broken glass (any thickness,size,quality or description) from wooden frames or stone concrete or brick surrounds,glazed with putty or fixed with beads, complete all as specified.

S & F 3.0 mm thick sheet glass, ordinary quality and glazing with oil putty in squares not exceeding 0.5sqm in each pane, complete all as specified.

Taking down cement plaster on brick or concrete surface and description including raking out joints Hacking for key scrubbing down with water, M&L Rendering 15mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces finishing the surface even and smooth without using extra cement mixed with and including two coats of cement base paint over a coat of primer on newly plastered surface of wall including preparation of surface and curing after applying each coat complete all as specified and directed.

Taking down cement plaster on brick or concrete surfaces any description including raking out joints hacking for keys scrubbing down with water, M&L Rendering 10mm thick in cement mortar 1:6 on fair aces of brick work or concrete surfaces finishing the surface even and smooth without using extra cement including preparation of new plastered surface of wall and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed.

Dismantling of floor tiling incl cement mortar bedding (but not backing) removing servicable tiles to a store and rubbish off premises, M&L non skid ceramic coloured tiles 7 to 8mm thick (square /rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

Dismantling of wall tiling incl cement mortar bedding (but not backing) removing servicable tiles to a store and rubbish off premises, M&L Glazed ceramic coloured tiles of size 450 x 300 x 7mm thick, on vertical surfaces of walls such as skirting dado etc. set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick rendering in cement mortar 1:4, all as specified and directed.

Dismantling of floor tiling incl cement mortar bedding (but not backing) removing servicable tiles to a store and rubbish off premises, M&L vitrified ceramic light shade tiles 8 to 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm laid over 15mm thick screed bed in CM 1:6 etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified and directed.

S&F in repair low level 10 ltrs capacity PVC valveless symphonic action type flusing cistern low level white with inlet ball valve float ovel handle including 32mm dia PVC flushing pipe complete all as specified and directed by Engr-in-Charge.

S&F in repairs 15mm bore angle valve chromium plated screwed down fancy type high pressure screwd both ends for iron pipe of 15mm bore complete all as specified and directed by Engineer-in-Charge.

M&L for disconnecting existing tank, setting side for reparing cleaning and removing all scale and dirt from tanks and from mouths circulating pipes and housing in same position of capicity upto and including 500 ltrs and endrosed the word " CLEANED WITH DATE" complete all as specified.

Dismantling structural steel work including doors, gates but excluding framed truss etc. complete all as specified and directed.

Dismantling of steel (Corrugated, semicorrugated, etc) sheets in roof coverings, M&L pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws. Sheet colour approved by Engineer-in-Charge complete all as specified and directed.

Dismantling of steel (plain) sheets in roof coverings, S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding/ridges to wall, fixed with self tapping screws complete all as specified and directed.

S&F roof trusses (framed), trussed, purlins, rafters rails and fastenings and heavy bracket framing (beem, tee, angle, channel or flat sections) including distance pieces, cleats etc of FE 410 W (Gde E-250) quality B including one shop coat of red oxide primer complete all as specified and directed.

M&L PCC 1:5:10, type E-2, (using 40mm graded crushed stone aggregate) in foundation filling/sunken floor and mass concrete, all as specified.

M&L for Preparing the new steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint, complete all as specified.

Preparation of old painted steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint/camouflaged pattern, complete all as specified and directed.

Material & labour for one coat of cement base paint including preparation of old surface to match the shade as per colour scheme as approved by Engr-in-Charge.

M&L for applying two coats of oil bound distemper on walls including preparation of old plastered surfaces complete all as specified.

Demolition of cement concrete ( unreinforced) in ground floors and pavings n exe 15 cm thickness. ( below or above ground level) all as specified.

M&L 75mm thick plain cement concrete type D-2, 1:4:8 (using 40mm graded crushed stone aggregate) as in Sub base/Plinth protection all as spd and directed.

S&F Cast Iron door closer hydraulically regulated desination No 1 universal type suaitable for door shutter up to 1000 mm in width and of weight not more then 35 kg, complete all as specified and as directed.

S & F in position suspended anodised aluminium false ceiling system using E-grid suspended ceiling grid system. The size of grid shall be 605X605 mm fixed in the grid of E-grid suspended ceiling grid system duly suspended by 6 mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40X3 mm size long and expansion hold fasteners 12.5 mm dia 40 mm long and M&I for exposed metal frame ceiling with 6 mm thick calcium silicate boards of siliceous and calcareous materials reinforced with cellulose fibre for fixing in 600X600 mm grid (Expect frame work) complete all as directed and as approved by Engr in Charge and dismantling wall and ceiling board (fibre, pulp, insulation etc) or insulation boards/slabs/blankets any thickness including fillets,Complete all as specified and directed by Engineer-in-Charge.

Deduction to be made from BOQ for schedule of credit (Sch 'A' Part - II) Amount of ₹ 11,450.00 during AOC Note:- Tenderers shall not quote for this Schedule

M/s Rahat Traders

NATIONAL TRADING COMPANY

M/S MANHAS ENTERPRISES