12/EE(E/M)/EBSD/EM/KMDA/eT- 12 of 2022-23

Amount

De-assembling of 150 mm dia CI sluice valve from sludge discharge line and kept at floor.

De-assembling part by part of the valve.

Re casting & machining to its original condition of gate of each valve.

Replacement of the gland bush and coller.

Replacement of the threaded stem.

Replacement of stem moving nut.

Assembling part by part of the valve along with paint.

Hydraulic testing of the valve with generated of test reporT.

Carring cost between workshop and side.

Fitting fixing of whole asembled valve into the original position.

Supply and delivery of Cost iron double flanged manually operated sluice valves generally conforming to IS 14846 : 2000, having four faces and spindle nut of gunmetal, inside screw non- rising type quality gunmetal /AISI 410 spindle: seat tested to 10kg/CM2 and body tested to 15kg/CM2, flanges flat faced and drilled to 1S. : 1538 : 1993. Painted black all over with asphalt base paint. Valves tested by closed end method. NB Diameter 150 mm.

Erection of Single Steel tubular pole of length as given below with/without sole plate & Cap etc. in CC foundation (Proportion and dimension indicated below), having 600x600x150 mm thick CC (4:2:1) base block below sole plate/pole with hard jhama metal including CC (6:3:1) muffing 0.30 mts. dia and 0.30 mts. above ground level including 3 mm thick neat cemented finish and GI earth bolt after making drilled holes etc. on pole & carriage of pole upto 1.6 Km from Store to work-site including filling up the excavated earth pit with shifted soil and ramming properly. (a) Upto 9.00 mtrs Size - 0.6X0.6X1.70 mtrs

Painting of Steel Tubular Pole of lengths and no. of coats of paint, as given below with ready mixed paint/primer of approved make, and brand incl. preparation of surface by sand paper/emery paper, cleaning etc. for receiving fresh coat of paint. (a) Upto 9.0 mtr. long pole (i) 1st coat of aluminium paint over 1 coat of RO priming

1st coat of aluminium paint over 1 coat of RO priming.

2nd coat of aluminium paint over 1 coat.

M.S. structural works in columns, beams etc. with simple rolled structural members (e.g. joists, angle, channel sections conforming to IS: 226, IS: 808 & SP (6)- 1964 connected to one another with bracket, gussets, cleats as per design, direction of Engineer-incharge complete including cutting to requisite shape and length, fabrication with necessary bolting, metal arc welding conforming to IS: 816- 1969 & IS: 1995 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete. The rate includes the cost of rolled steel section, consumables such as electrodes, gas and hire charge of all tools and plants and labour required for the work including all incidental chages such as electricity charges, labour insurance charges etc. (For chequere plate)

I) For structural members of specified sections weighing less than 22.5 Kg./m

Add GST @18%

Add Cess @ 1 %

S M ENGINEERING COMPANY

SOUMI ENTERPRISE