Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹12.5 LAccepted-AOC | L1 | Accepted-AOC The lowest bidder | |
| 2 | L2₹13.8 L+₹1.0 L (8.07%)Rejected-AOC H NO 24 BEHIND GURUDWARA JUTOGH CANTT SHIMLA HP 171008 | SHIMLA | HIMACHAL PRADESH | 171008 | L2 | Rejected-AOC Other than the lowest bidder | |
| 3 | L3₹13.8 L+₹1.0 L (8.19%)Rejected-AOC | L3 | Rejected-AOC Other than the lowest bidder |
Tender Value
₹20 L
EMD Value
₹40,000
Closing Date
20 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (I) JUTOGH
GE (I) JUTOGH, JUTOGH CANTT SHIMLA (HP) - 171008
WELCOME MAINT AND CERTAIN MISC B/R REPAIRS TO OFFRS MD ACCN AT JUTOGH CANTT UNDER GE (I) JUTOGH
2023_MES_597789_1
GE(I)/JUT-26 OF 2023-24
Open Tender
Civil Works
Item Rate
180 days
JUTOGH
CLASS E CATEGORY a (i)
6 documents required · 6 mandatory
₹500
GE (I) JUTOGH
₹40,000
Yes
7 Jul 2023
23 May 2023
22 Jun 2023
23 May 2023
20 Jun 2023
6 Jun 2023
23 May 2023 - 29 May 2023
Amount
M&L for preparing old decorated plastered or unplastered surfaces of ceiling by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots including necessary putty work on holes/cracks and applying one coat of white wash complete all as specified and directed.
M&L for preparing old decorated plastered or unplastered surfaces of wall including cornices, pilasters etc by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots including necessary putty work on holes/cracks and applying two coat of white wash complete all as specified and directed.
M&L for preparing old decorated plastered or unplastered surfaces of wall including cornices, pilasters etc by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots including necessary putty work on holes/cracks and applying one coat of oil bound distemper (white/Approved shade) complete all as specified and directed.
M&L for preparing old decorated plastered or unplastered surfaces of wall including cornices, pilasters etc by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots including necessary putty work on holes/cracks and applying two coats of oil bound distemper (white/Approved shade) complete all as specified and directed.
Complete removal of existing treatment on wall (any number of layers) by scrapping with steel scrappers or any other means, including filling depressions of scrapped with wall care putty (3mm thick) and preparation of surfaces for further treatment and applying two coats of oil bound distemper (white/Approved shade) complete all as specified and directed .
M&L for complete removal of existing treatment of plastered or unplastered old decorated surface walls by brooming down and applying two coat of weather proof anti fungal exterier emulsion paint on external surfaces including a coat of alkali resistant priming paint at any height of building/ tower, complete all as specified and directed .
M&L for preparing old painted surfaces of wood and wood based materials of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint of white / approved shade complete all as specified and directed.
M&L for preparing old painted surfaces of wood and wood based materials of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint of white / approved shade complete all as specified and directed.
M&L for preparing old surface of steel & iron surfaces of any description over 10 cm in width or girth , and applying one coat of white/ approved colour/ shade synthetic enamel paint, complete all as specified and directed.
M&L for preparing old surface of steel & iron surfaces of any description over 10 cm in width or girth , and applying two coats of white/ approved colour/ shade synthetic enamel paint complete all as specified and directed.
Demolition of cement concrete unreinforced of any description and in any position not otherwise specifically provided, complete all as specified and directed.
M&L for 75mm thick, PCC 1:4:8, type D-2, using 40mm graded crushed stone aggregate as in sub base of floor complete all as specified and directed.
M&L for 75mm thick, PCC 1:3:6, type C-2, using 40mm graded crushed stone aggregate as in plinth protection finished the surface even and smooth without using extra cement complete all as specified and directed.
M&L for 20mm thick screed bed in CM (1:6) as in sub base of floor, complete all as specified and directed.
M&L for chequered cement concrete tiles glossy finish 30cm x 30cm x 20-25mm thick, set jointed and pointed in neat cement slurry in floors with mixture of white and grey cement in equal proportion and pigment laid over and including 15 mm thick screed bed in CM 1:6 complete all as specified and as directed.
Taking down cement or cement lime plaster on brick or stone walls , etc including raking out joints, hacking for key, scrubbing down with eater etc, all as specified.
M&L for rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces finished even and fair(without using extra cement) mixed with water proofing compound of any height (Ground loor to 3rd floor), complete all as specified and directed.
M&L for prepartion of newly plastered surface of wall applying two coats of weather proof anti fungal exterior emulsion paint on external surfaces incl a coat of alkali resistant priming paint at any height (G Floor to 3rd Floor), complete all as specified and directed.
M&L for rendering 15 mm thick on fair surfaces of brickwork or concrete surface in cement mortar 1:6 finished even and smooth without using extra cement, complete all as specified and directed.
M&L for rendering 10 mm thick in cement mortar 1:3, on ceiling surfaces, finished even and smooth without using extra cement, complete all as specified and directed.
M & L for preparing newly plastered surfaces and applying two coats of oil emulsion distemper, over a coat of primer and a layer of wall care putty 2-3mm thick, complete all as specified and directed . Note: Colour and shade will be approved by GE
M&L for newly plastered/ unplasred surface of celling and applying three coats of white wash, complete all as specified and directed.
Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed.
S&F vitrified ceramic coloured tiles dark shade 8-9 mm thick size 600X600 mm floors etc set and jointed in white or coloured cement to match incl 15mm thick screed bed in CM 1:6, complete all as specified and directed.
S&F vitrified ceramic coloured tiles Dark shade 8-9 mm thick size 600X600 mm floors etc set & jointed in neat cement slurry and pointed in white or coloured cement to match on vertical surfaces such as skirting, dados and risers to steps, over 10mm thick backing coat in CM 1:4 etc., complete all as specified and directed.
M & L for non skid ceramic joint free tiles 7 to 8 mm thick (square/ rectangular) area of each tile exc 0.09 sqm but not exc 0.18 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and incl 15mm thick screed bed with CM 1:6, complete all as specified and directed.
M&L for glazed ceramic coloured tiles glossy finish 350x250x7mm/ 300x200x7mm/ 450x300x7 to 8 mmthick laid pattern, as in skirting dado riser to steps etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour tile laid over and incl 10mm thick screed bed in CM 1:4 complete all as specified and directed. Note : Colour of tile will be approved by GE.
Taking down wall panelling and similar work, complete all as specified and directed.
S&F Solid PVC Wall Lining consisting of 5mm thick single side prelam wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame, complete all as specified and directed.
S & F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame, complete all as specified and directed.
Demolition of brick or stone masonary built in cement mortar incl all quoins arches, pillars, etc but excluding ashlar facing, dressed stone work and precast concrete block, at any height, complete all as specified and directed.
M&L for brick work with old size kiln burnt sub class 'B' bricks, straight or curved on plan exc 6 m in mean radius, built in CM 1:6, complete all as specified and directed.
M&L for brick work with sub class 'B' brick in cement mortar 1:6, straight or curved on plan to any radius in half brick thick wall, complete all as specified and directed.
Demolition of stone slabs laid bedded and pointed in any mortar of any description or thickness in floors, aprons etc., complete all as specified and directed.
M&L for granite (of any type) 18-20mm thick one side machine polished in steps (as in riser tread) jambs, pillars, window Cills, and top of kitchen platform and top of counter top wash basin etc set and jointed in neat cement slurry and pointed with coloured cement to match including 20mm thick screed bed in CM 1:6, complete all as specified and directed.
M&L for granite (of any type) work 18-20mm thick (table rubbed and polished) for wall lining (veneering to wall) including laid over 15mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including 10mm thick backing coat in CM 1:4, complete all as specified and directed.
M&L for Rounding to edges of stone slabs one edge, such as in , cooking platform, and other similar situations, complete all as specified and directed.
Supply only Liquid water proofing compound, complete all as specified and directed.
M&L for 15mm thick, screed bed in CM 1:3 in (Sunken slab) with water proofing compound as per manufacturer instruction's surface shall be finished even and smooth without using extra cement, complete all as specified and directed. Note: WPC shall be measured and paid separately.
M&L for applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 Kg per sqm including cleaning surfaces etc complete as in sunken portion, complete all as specified and directed.
M&L for PCC 1:5:10, type E-2, using 40mm graded crushed stone aggregate, as in filling and mass aggregate complete all as specified and directed.
M&L for 10mm thick cement plaster in CM 1:3 on top of roof slab with using water proofing compound as per manufacturer instruction's surface shall be finished even and smooth without using extra cement, complete all as specified and directed. Note: WPC shall be measured and paid separately.
Taking down PVC pipe of any description, complete all as specified and directed.
S&F PVC (SWR) floor trap 75mm dia, plain with grating including jointing with solvent cement, complete all as specified and directed.
S&F PVC (SWR) pipes 75mm dia single socketed, in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and directed.
S&F PVC (SWR) bends any radius 75 mm dia complete all as specified and directed.
S&F PVC (SWR) bends in any radius 110 mm bore with access door, complete all as specified and directed.
S&F for PVC (SWR) pipes 110mm dia single socketed, in any length with rubber ring joints, laid in trenches, complete all as specified and directed.
Taking down chowkats or frames exc 1.50 sqm but not exc 4sqm each with shutters (without taking off shutters from the frames) and removing from site, making good the dismantled portion in PCC 1 :2:4, or CM 1:4, complete all as specified and directed.
Taking down chowkats or frames n exc1.50 sqm each with shutters (without taking off shutters from the frames) and removing from site, making good the dismantled portion in PCC 1:2:4, or CM 1:4, complete all as specified and directed.
Taking down shutters of any description exc 1Sqm and n exc 2 Sqm each and removing from site, complete all as specified and directed.
S&F second class hardwood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and directed.
S&F 35mm thick IInd class hard wood plain framed, panelled shutters (any numbers of panels), with panels of timbers flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers, complete all as specified and directed.
S&F glazed and skeleton shutters 35mm thick 2nd class Hard wood open rebated and prepared to receive glass, gauge etc. edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc. sized of members of shutter with three number of panels, complete all as specified and directed.
S&F in repair for Block board 18/19 mm thick, grade 2 quality, 'interior grade', decorative type with decorative face veneer on one face, fixed with nails/ screws sin cup board shutter/ pelmets etc. or to timber frame work, including 6mm thick teak wood lipping, complete all as specified and directed.
S&F 0.90mm thick decorative/glossy finish laminated sheet of surface finish, colour and pattern as approved fixed with adhesive as per manufacture instruction, complete all as specified and directed.
S&F continuous piano hinges mild steel bright finish or electro galvanized with open flap width 30 mm, complete all as specified and directed.
S&F hasp and staple, safety type,of aluminium anodised including bolt to hinge plate and fixed with screws 100 mm size, complete all as specified and directed.
M&L for preparing new or previously untreated surfaces of wood and wood based materials of any description over 10 cm in width or girth and applying two coat of synthetic enamel paint of of white/ approved shade over a coat of pink primer, complete all as specified and directed.
M&L for factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame, complete all as specified and directed.
S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S square tube, complete all as specified and directed.
S&F galvanized mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm fitted with tinned tacks or galvanised wire staples, complete all as specified and directed.
S&F in repairs mild steel 300mm ordinary rat rail pattern springs incl roller and roller plate complete all as specified and directed.
S&F aluminium extruded alloy handles fabricated type anodised 150mm long, complete all as specified and directed.
S&F Butt hinges 100 mm size medium weight cold rolled mild steel, complete all as specified and directed.
S&F butt hinges75mm size medium weight cold rolled mild steel, complete all as specified and directed.
S&F aluminium anodized barrel tower bolt of extruded section of size 200mm long, complete all as specified and directed.
S&F in repairs 250 mm aluminium anodized sliding door bolts, ISI marked, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy, complete all as specified and directed.
Hacking out old broken glass (any thickness, size, quality or description) from wooden frames, glazed with putty or fixed with beads, complete all as specified and directed.
S&F sheet glass ordinary quality 4mm thick glazing in square/ rectangle n,exc 0.50 sqm each pan with oil putty or aluminium beads fixed to steel etc., complete all as specified and directed.
S&F figured glass ordinary quality 4mm thick glazing in square/ rectangle n,exc 0.50 sqm each pan with oil putty or aluminium beads fixed to steel etc., complete all as specified and directed.
Dismantling water tanks or capacity exceeding 500 ltrs and not exceeding 1000 ltrs, complete all as specified and directed.
S&F rotational moulded polythelene water storage tanks (three layer) of 1000 ltr capacity (cylindrical vertical with closed top) hoisted and fixed in position, complete all as specified and directed.
S&F in repair 21-22 inch dia galvanised mild steel pan mortar (Tasla/ghamela) not less than 1mm thick with for 04 Nos bolt of 5-6mm dia with 8 Nos nut bolt with 8 Nos washer incl fixing on water storage tank as tank cover, complete all as specified and directed.
M&L for 20 mm ball valve, high pressure, with polythene float and fly nut complete, screwed for iron pipe or ferrule, complete all as specified and directed.
S&F gun-metal, globe or gate valves 20 mm bore with iron wheel head, screwed both ends for iron pipes and fixed of 20mm dia of pipe, complete all as specified and directed.
Taking up or down steel tubing and connections 15 mm bore, complete all as specified and directed.
Taking up or down steel tubing and connections 20 mm bore complete all as specified and directed.
M&L for Galvanised mild Steel water tubes,15 mm bore with all fittings, 'medium grade', ISI marked, galvanised, fixed to walls and ceiling or laid in floors, complete all as specified and directed.
M&L for galvanised mild Steel water tubes, 20 mm bore with all fittings, 'medium grade', ISI marked, galvanised, fixed to walls and ceiling or laid in floors complete all as specified and directed.
S&F for vitreous china wash basin flat back of size 550x400mm incl brackets, cutting for and pinning in ends or brackets, but excluding taps, waste, chain and plug and porcelain stopper, complete all as specified and directed.
S&F in repairs vitreous China wash basin pedastal pattern super white/ colour of size 560x475mm including all fittings complete, decorative type, complete all as specified and directed.
S& F in repairs 32mm dia PVC wast pipe for wash hand basin and kitchen sink of length 900mm long with PTMT nuts, complete all as specified and directed.
S&F in repairs for brass CP fancy type 15mm bore pillar tap for WHB make: jaguar or equivalent, complete all as specified and directed.
S&F 15 mm bib taps fancy type cast copper alloy chromium plated with crutch with butter fly handle, screwed for iron pipe or brass ferrule, complete all as specified and directed.
S&F stop valves, cast copper alloy, screwed down, high pressure, with crutch or butter fly handle, fancy type, chromium plated, with long shank and cup (concealed type) screwed both ends for iron pipe or for unions 15 mm bore fixed, complete all as specified and directed.
S&F in repairs PVC connection 15 mm size with PTMT nuts of length 600 mm long, complete all as specified and directed.
S & F in repair 15mm brass CP wall mixer for mixing hot and cold water with hand shower complete all as specified and directed.
S & F in repair 15mm brass CP wash hand basin/ kitchen sink mixer for mixing hot and cold water complete all as specified and directed.
S & F in repairs brass chromium plated tubular towel rail ‘D’ type 60cm long, complete all as specified and directed.
S&F for chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed
S&F CP brass teliphonic spray (health faucet) with flexible pipe 1.50m long fixedto EWC suitable for 15mm bore of pipe fixed in repairs complete all as specified and directed.
S&F in repair CP grating doom 100mm dia complete all as specified and directed.
S&F in repair aluminium door seal (rat proof) fitted in door leaf with screw complete all as specified and directed.
S&F in repair PVC bath cabinet with mirror 350x450mm, complete all as specified. Make : Prayag or equivalent.
S&F in repair glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long, complete all as specified and directed.
S&F in repair Vitreous china wash water closet pan ( Pedestal pattern) white fixed in floor including P or S trap, connecting to drain ( or outgoing pipe ) and flush pipe, anti syphonage pipe, flush pipe to pedestal pan including all joints etc. complete all as specified and directed.
S&F in repair Plastic water closet seat, white/coloured, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.
S&F in repairs 10 litres cap PVC low level valve less symphonic action type flushing cistern white with inlet, ball valve, float and handle including brackets and flushing pipe, complete all as specified and directed.
S & F in repair sink with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste couplings waste pipe; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed..
S&F in repair stainless steel 25mm dia drapery rods for curtains incl stainless steel decorative end knobs and brackets (wall to wall or flush to wall) for securing curtain rod complete all as specified and directed.
S & F in repair stainless steel plate rack (utencil rack for kitchen of size 750 x 600 x 250mm and min 0.80 to 1.00 mm thick fixed with stainless steel screw and rawl plug complete all as specified and directed.
Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories), complete all as specified and directed.
M&L for MS sheet valley gutters, 1mm thick exc 250mm dia but n.exc 350mm dia galvanised class 3, half roundwith rounded edges including necessary suppprting (MS flat) brackets/ clamps and fixed to existing wooden/steel rafter/parlins edge etc complete all as specified and directed.
M&L for two coat of synthetic enamel paint on new or previosly untreated surface over a coat of red oxide (including preparation) on eaves gutter and pipes any description, n. exc 60 cm girth including holderbats, distance pieces, etc. (length measured overbends, branches etc.) complete all as specified and directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided, complete all as specified and directed.
S&F framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars, barred iron doors, ladder, framed baluster, walk ways, railing, framework of watertanks staging and similar work conforming to Fe-290. Gde-E-165 complete all as specified and directed.
M&L for preparation of new steel surface of any description over 10cm in width or girth and applying two coat synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed.
M&L for 3mm thick wall care putty on wall surface with proper finishing of surface, complete all as specified and directed.
M/S J.S.ENTERPRISES
M/S Meera Builders
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .