CWE/FZR-03/2020-21 Special repair to OTM bldg No P-48 (Quarter Guard) of Fd Regt under GE (West) Ferozepur Cantt

Amount

Dismantling of brick tiles single layer jointed & pointed in cement mortar including removal of grass including roots, vegetation, complete all as specified.

Demolition of mud phuska in roofs, any thickness, including leeping plaster (whether full thickness removed or only a part thereof) complete all as specified.

M&L for screed bedding 10 mm thick in cement mortar (1:4) concrete surfaces of roof, mixed with WPC (WPC shall be measured and paid seaparately), finished even and smooth without using extra cement etc, complete all as specified.

S&F 150 micron thick (transparent) polythene film with 150mm end & side laps, laid over a coat of bitumen primer @ 0.30 kg to 0.50 kg per sqm, bonded with a coat of 85/25 industrial bitumen @ 1.20 Kg/sqm and laid on roof, complete all as specified.

M&L 80 mm thick average, consolidated thickness, mud phuska on flat roofs,including 25 mm thick mud plaster complete all as specified.

S&F 40 mm thick brick tiles laid over a layer of 25mm thick mud mortar and joints grouted flush in cement mortar (1:3) mixed with 5% of crude oil by weight of cement, complete all as specified.

All as per item No 6 herein before but using old brick tiles retrieved from dismantling (Item No 1 hereinbefore) including cleaning and removal of mortar from tiles, complete all as specified.

M&L for reinforced cement concrete (1:2:4) type B-1 (20 mm graded stone aggregate) as in Beams, cantilevers, bressummers, lintels over 1.5m span, complete all as specified.

S&F Mild steel TMT bars 10 mm dia and over as in reinforcement cut to length bent to shape required including cranking, hooking at ends and binding with mild steel wire (annealed) not less than 0.9mm dia Fe-500/550 confirming to IS-1786-1985 all as specified.

S&F Mild steel TMT bars 5 mm dia cut to length, bent to shape required including cranking, bending spirally for columns, hooking ends, as in stirrups,spacers, binders and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete, Fe-500/550 confirming to IS-1786-1985 all as specified & directed.

S&F Factory made box type side hung steel window with pintal hinges & 2 Nos 150 mm mild steel tower bolts to each shutter, steel handle and with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and shown on Drawing No CEJZ/TD-06/07 & CEJZ/TD-07/07.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified.

S&F 4mm thick, plain sheet glass ordinary quality and glazing, with oil putty or with wooden beads (supplied alongwith shutters), in squares n.exc 0.50 Sqm complete all as specified.

S&F in repair, stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture not more than 1.40mm and fixed with tinned tacks or stainless steel wire staples, complete all as specified .

S&F Framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work, complete all as specified.

M&L Preparation of new steel surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint, complete all as specified.

Dismantling wrought iron or mild steel work of any description not otherwise provided, comoplete all as specified.

M&L Mild Steel Framed work as in doors or gates of angle or other section with gusset plates, rails,braces, etc. complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering,running rails and guides) and hanging; also fastening and fixing, complete all as specified.

Excavation in trenches in hard/dense soil not exceeding 1.5 metre wide and not exceeding 1.5 metre deep and not exc 10 Sqm and getting out,compete all as specified.

Demolition of un-reinforced cement concrete in ground floor and paving not exceeding 15 cm thick (below or above ground level), complete all as specified.

Demolition of un-reinforced cement concrete of any description and in any position, complete all as specified.

M & L cement concrete (1:4:8) type D-2 40mm graded aggregate in foundations, fillings and mass concrete, complete all as specified.

M&L for Formwork to rough finished sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter, complete all as directed by Engr-in-Charge

M&L for Formwork to rough finished concrete sides of square, polygonal, pillars, posts, struts, piers, columns and stanchions, complete all as directed by Engr-in-Charge

M&L for reinforced cement concrete type B-1, (1:2:4) (20mm graded aggregate)as Columns, pillars, piers, posts and struts etc. complete all as specified and directed.

M&L for reinforced cement concrete type B-1, (1:2:4) (20mm graded aggregate) as Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete. complete all as specified and directed.

M&L for granite (of any type) tiles 20mm thick machine cut, as in skirting,steps,dado,pillars etc with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing & including rendering coat of 10 mm thick in cement mortar (1:4), complete all as specified.

Returning, filling in, earth including spreading, leveling watering and well ramming in layers each not exceeding 25cm thick each layer, complete all as specified.

Removal of surplus soil to a distance not exc. 50 metre and depositing where directed at a level not exc. 1.5 metre above the starting point complete all as specified.

Dismantling of plain or corrugated any type of sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings, complete all as specified.

S&F pre-painted galvalume aluminum zinc coating sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and as directed by Engr-in-Charge.

S&F joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated), complete all as specified.

Taking down cement plaster from brick walls of any description, racking out joints, hacking for key, scrubbing down with water etc, complete all as specified.

M&L for Rendering 15 mm thick in cement mortar (1:4) on any face of brick walls or concrete surfaces, mixed with WPC (WPC shall be measured and paid seaparately), finished even and smooth without using extra cement, complete all as specified.

M&L for Rendering 10 mm thick in cement mortar (1:6) on any face of brick walls or concrete surfaces, finished even and smooth without using extra cement, complete all as specified.

M&L Rendering 5 mm thick in cement mortar (1:3) on ceiling concrete surfaces finished even and smooth without using extra cement, complete all as specified.

Supply only liquid water proofing compound ISI marked, complete all as specified.

M&L Preparation of new plastered surfaces walls etc and applying two coats of cement base paint over a coat of primer, complete all as specified.

M&L Complete removal of existing treatment and preparation of old plastered surfaces of walls and applying two coat of cement base paint over a coat of primer, complete all as specified.

M&L Complete removal of existing treatment and preparation of old plastered surfaces of walls and applying and applying two coats of oil bound distemper, over a coat of 3 mm thick wall care putty, complete all as specified and as directed.

M&L Preparation of newly plastered surfaces and applying two coats of oil bound distemper, over a coat of 3 mm thick wall care putty, complete all as specified and as directed.

M&L Preparation of newly plastered surfaces of ceiling & applying three coats of white wash, complete all as specified.

M&L for Taking down wooden/steel chowkhats or frames with shutters (without taking off shutters from the frames) of size not exceeding 1.50 Square metre each including cutting holes in brick walls of appropriate size for insertion of cement concrete blocks for hold fasts,making good jambs with plaster in CM(1:4) to match with existing finish, complete all as specified.

All as per item No 43 herein before but size exceeding 1.5 Square metre and not exceeding 4 Square metre each.

Taking down door shutter of any description, exc 1 Sqm but not exceeding 2 sqm each and removing to stores, complete all as specified.

S&F Factory made, 35mm thick, 2nd class hard wood (Hollock), plain framed, panelled shutters, any number of panels, panels shall be of 9 mm thick B.W.P. commercial ply or 12mm thick BWR grade veneered particle board medium density, wood particle board with commercial face veneers, size of members as specified in clause 8.24(a) of MES Schedule Part-I section-8 complete all as specified.

S&F Factory made 35 mm thick,2nd class hard wood (Hollock), glazed and skeleton shutters open rebated and prepared to receive glass/ gauge etc (without sash bars), edges of framing plain chamfered or rounded, fitted with cut and mitered beads for securing glass/gauge etc for doors, size of members as specified in clause 8.24 (a) of MES Schedule Part-I Section-8, complete all as specified.

S&F Factory made pressed steel frames made of 1.25 mm thick MS sheet of profile 105 mm X 60 mm for door and window frames with one or more rebates including lock strike plate, shock absorber, 20 mm dia 60 mm long MS conduit for housing of a drop bolt,hinges, hold fasts/lugs etc, treating of internal surfaces of chowkhats with coal tar or black paint including hold fasts/lugs etc complete all as specified.

M&L Cement concrete (1:3:6) type C-1 (20 mm graded stone aggregate) as in filling of steel chowkhats and bed blocks of hold fast including necessary formwork, complete all as specified.

S&F 100 mm butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-22, complete all as specified.

S&F anodized aluminium alloy barrel tower bolts, 200 mm long and fixed with steel screws complete all as specified.

S&F cast type anodized aluminium handle, 150 mm long fabricated type and fixed with steel screws complete all as specified.

S&F Factory made solid PVC door frame (having density not less than 600 kg/cum) of size 50 mm x 47 mm made of 5 mm plain colour PVC sheet reinforced with mild steel square tube, complete all as specified in MES Schedule Part-I (2009),including making good jambs in CM(1:4) with finishes to match with existing, complete all as per specification & shown in drawing.

S&F Factory made solid panel PVC door shutter 30 mm thick (having density not less than 600 kg/cum) consisting of frame made out of MS tubes for top & bottom rails, MS frame covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, supply and fixing in the frame at site, complete all as per specification in MES Schedule Part-I (2009) & shown in drawing.

M&L Preparation of new wooden or wood based surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified.

M&L Preparation of old treated wooden surfaces of any description, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified.

M&L Preparation of old treated steel surfaces of any description, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) complete all as specified.

M&L for Non skid Ceramic coloured ( colour and shade as approved) tiles,any shape, 7mm to 8 mm thick area of each tile exc. 0.11 sqm and not exc 0.18 sqm as in flooring set and jointed in neat cement slurry and pointed in white cement with pigment to match the colour of tiles laid over & including 15 mm thick screed in cement mortar (1:6), complete all as specified.

All as per Item No-59, but as on vertical surfaces such as skirting/dado over and including 10 mm thick rendering in cement mortar (1:4), complete all as specified.

M&L for Non skid Ceramic coloured (colour and shade as approved) tiles, any shape, 7mm to 8 mm thick area of each tile exc 0.06 sqm and not exc 0.11 sqm as in flooring, set and jointed in neat cement slurry and pointed in white cement with pigment to match the colour of tiles laid over & including 15 mm thick screed in cement mortar (1:6), complete all as specified.

M&L for Glazed ceramic tiles, coloured (colour & shade as approved), of size 450x300x7 mm thick on vertical surfaces such as in skirting/dado etc set and jointed in cement slurry and pointed in white cement with pigment to match the colour of tiles, laid over & including 10 mm thick backing coat in cement mortar (1:4), complete all as specified.

Demolition of stone slabs and tiles of any description or thickness in floor,aprons, etc laid in bedded and pinted in any surfaces complete all as specified and directed.

M&L for Kota stone slabs, 20mm to 25mm thick, machine cut as in flooring of size not less than 0.25 Square metre each, set and jointed in cement slurry and pointed in cement mixed with pigment to match the shade of slab laid over & including screed bed of 20 mm thick in cement mortar (1:6) including rubbing, cutting and polishing (mirror type) complete all as specified.

S&F Kota stone slabs, 20mm to 25mm thick, machine cut as in shelf, skirting,steps,dado,pillars etc, set and jointed in cement slurry and pointed in cement mixed with pigment to match the shade of slab laid over & including rendering coat of 10 mm thick in cement mortar (1:4) including rubbing, cutting and polishing, complete all as specified.

M&L for Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations, complete all as specified.

M&L for cement concrete chequered tiles 20cm x 20cm x 25mm thick, set jointed and pointed in neat cement slurry in floors with grey cement and pigments to match, including 15 mm thick screed in CM 1:6, complete all as specified.

S&F in repair Vitreous china white squatting pan orissa pattern of size 580mm x 440mm with integral foot rests including necessary lime concrete and 100 mm bore cast iron ‘P’ trap with 550 to 600 mm long neck for connecting WC to branch piece with cement joints, complete all as specified.

Demolition of brick work built in cement mortar of any specification and in any position complete all as specified.

M&L for Brick work in cement mortar 1:6 using sub class ‘B’ old size bricks, straight or curved on plan exceeding 6 metre mean radius, complete all as specified.

All as per item 70 hereinbefore but using old bricks retrieved from demolition under item 69 hereinbefore including cleaning and removal of mortar from old bricks complete all as specified.

S&F in repairs PVC syphonic action type low level flushing cistern (white) of 10 liters capacity with inlet ball float valve, 32 mm PVC flush pipe and necessary fixing arrangements and connecting to water pipe, complete all as specified .

S&F in repairs wash hand basin, flat back 550mm x 400mm vitreous china (white) including PTMT waste coupling/fittings, 32 mm bore size, waste pipe, PVC, 32mm bore, angle iron/cast iron brackets of required size as directed & making good disturbed surfaces to match with the existing , complete all as specified.

S&F Soap Dish stainless steel of suitable type as directed, fixed to walls with chromium plated brass screws and wooden/plastic cleats, complete all as specified.

S&F 15 mm bore overhead shower single flow (ABS body chromium plated with grey face plate) with rubit cleaning system including shower arm 240 mm long(light weight) round shape with wall flange complete all as specified & directed.

S&F as in repair 15 mm bore fancy type concealed stop cock (regular body) cast copper alloy screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe or for unions, complete all as specified & directed. .

S & F in repair for vitreous china, bowl urinal flat back, size : 465 x 355 x 265mm white (min) with union and grating for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) including. providing and fixing plugs, securing urinal to plugs with and incl, 60 mm long brass screws, pointing around urinal back in cement mortar 1:2 (excl fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and as directed

Taking up or down existing steel water tubing, 15 mm bore alongwith connections fixed/laid in any situation, complete all as specified.

Taking up or down existing steel water tubing, 20 mm bore alongwith connections fixed/laid in any situation, complete all as specified

Fixing only, steel water tubing, 15mm bore and connections in new or old position using new fittings fixing to wall/ceiling or laid in floors complete all as specified.

Fixing only, steel water tubing, 20mm bore and connections in new or old position using new fittings complete all as specified.

S&F Galvanised iron steel water tubing, 15 mm bore, medium grade with all fittings and fixed to walls and ceilings or laid in floors including cutting and making good, complete all as specified.

S&F Galvanised iron steel water tubing, 20 mm bore, medium grade with all fittings and fixed to walls and ceilings or laid in floors including cutting and making good, complete all as specified.

S&F as in repair 15 mm bore fancy type bib taps long body cast copper alloy 15mm bore with fancy chromium plated screwed down, screwed for iron pipe or for brass ferrule, complete all as specified..

S&F as in repair 15 mm bore fancy type angular valve cast copper alloy screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe or for unions, complete all as specified. .

S&F in repairs PVC connection 15mm size with brass nuts on both ends, 450mm long with PTMT nuts complete all as specified.

M&L for 75mm PVC (SWR) multi floor trap, plain with grating including jointing with solvent cement, complete all as specified.

S&F in repair Towel rail, 19mm dia brass chromium plated, 600mm long with brass chromium plated brackets on both sides and fixed with steel screws and wooden/rawl plugs, complete all as specified.

S&F in repair, Grating square 150 mm size of PTMT (Minimum weight 100gms), complete all as specified.

S&F sheet glass corner shelf assembly consisting of 5.5 mm thick sheet galss shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long, complete all as specified.

S&F in repair 20 mm dia decorative type curtain rods chromium plated anodised aluminium alloy and all other connected works complete all as specified and directed.

S&F in repair fancy type powder coated aluminium bracket for curatin rod suitable for 20mm dia pipe all as directed.

Demolition and breaking up drain pipes of 100mm dia of pipe(Salt glazed stone ware, AC or Reinforced concrete) set in cement mortar complete all as specified.

S&F in repairs, 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls including distance pieces and including stack clamps with nuts & bolts, complete all as specified.

All as per item no 96, but laid in trenches or in floors, complete all as specified.

S&F 110mm bore, PVC (SWR) bends any radius with access door, complete all as specified.

S&F 110mm bore, PVC (SWR) branch piece, single (single T) equal or unequal with access door complete all as specified.

M&L for applying bond coat of epoxy bonding agent & cement 1:1 ratio for bonding old and new concrete on damaged surfaces applying polymer modified mortar in CM 1:3 including mixing of polymer latex additive upto 60 mm thicknes (Chajja's fins,border etc) Note :- (i) Quantity of polymer to be used @ 15 % by weight of cement. (ii) Use of electrical mixer to get homogeneous dough on bond coat surfaces. (iii) To achieve required thickness repeat this step after 24 hrs to as required. (iv) Keep the surface moist using water fog for 5 to 7 days etc complete all as specified and as directed. (v) Rate shall be inclusive of all necessary scafolding for building hieght up to 24 meter complete all as specified and directed by Engineer-in-Charge. Make : Epoxy bonding agent shall be as directed by Engineer-in- Charge complete all as specified and directed.

S&F in repair 1000 litres capacity rotational moulded, triple layer polythene water storage tanks (cylindrical vertical with closed top) hoisting and fixed in position on roofs including fittings, complete all as specified.

S&F in repair, 25 mm bore gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified

S&F in repair 25mm bore Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe or brass ferrule, complete all as specified.

S&F in repair, 20 mm bore gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified

M&L Preparation of new steel surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide, complete all as specified.

Demolition of un-reinforced cement concrete in ground floor and paving not exceeding 15 cm thick (below or above ground level), complete all as specified.

M&L for Cement concrete (1:3:6) type C-1 using 20 mm graded stone aggregate as in 50mm thick plinth protection, surfaces finished even and fair without using extra cement, including provision of construction joints, complete all as specified and directed

Excavating in post holes in (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in soft/loose soil, complete all as specified and directed

M & L cement concrete (1:3:6) type C-2 40mm graded aggregate in foundations, fillings and mass concrete, complete all as specified.

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground, complete all as specified.

S&F in rolled mild steel structural work as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc, and similar work complete all as specified.

Dismantling fencing of any description(barbed wire fence) including pillar bars and MS flats, nuts/bolts/rivets, complete all as specified.

Supply only Chain link MS galvanisd fencing of 3.15mm dia wire and 50mmx50mm mesh, complete all as specified.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire, complete all as specified.

S&F Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured), complete all as specified.

S&F mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5cm but n exc 10cm long dia of neck in 11 to 15 mm dia, complete all as specified.

Taking down carefully existing alumimium point wiring for light/fan/socket out let points complete with fitting and fixtures, battens, wire etc and making good the disturbed surfaces of walls and ceilings, complete all as specified.

S&F Point wiring complete with 1100 volts grade PVC FRLS insulated unsheathed cable of copper conductor, multi stranded of size 1.5 Sqmm, single core, drawn through & including PVC rigid concealed conduit, medium grade of suitable size (not less than 20mm dia )duly ISI marked with all accessories such as bends, reducers, spacers, saddles, junction boxes, bakelite sheets, sizes for mounting switch/sockets, fan regulators etc complete with and including continuous earth wire of size 1.5 Sqmm, single core, PVC FRLS copper conductor, insulated, unsheathed,stranded (Green colour) connected to common earth dolly complete all as specified for following :- (a) One light/fan point/bell controlled by one single pole one way switch.

(b) One 3 pin 5 Amp socket outlet point controlled by one switch on same board.

(c) One 3 pin 5 Amp socket outlet point controlled by one switch on Independent board .

S&F Switch, piano, flush type, single pole one way, 5 Amps, ISI marked,complete all as specified.

S&F Switch piano flush button type 15 Amps, single pole, one way,ISI marked, complete all as specified.

S&F Socket outlet,2 in 1, 5 pin ,5 Amp, piano flush type, ISI marked, complete all as specified.

S&F Socket outlet 2 in 1, 6 pin,5 Amp and 15 Amp, piano flush type,ISI marked, complete all as specified.

S&F Ceiling rose, surface type, backelite 65mmx50mm, 3 terminals, complete all as specified.

S&F Lamp holder, insulated body, threaded dome pattern, suitable for bracket/batten fittings, complete all as specified.

S&F LED bulb 10 watts suitable for fixing in lamp holder, complete all as specified.

S&F in repairs stepped type electronic fan regulator for ceiling fan 1200/1400mm size,230 volts,6 Amps, complete all as specified.

S&F in repairs MCB, single pole, 240 Volt, 32 Amps,10 KA 'B' series, complete all as specified.

S&F in repairs MCB, SPN, 40 Amps, 240 volts 6 to 32 Amps10 KA 'B' series, complete all as specified.

S&F Factory made sheet metal enclosures double door type made out of CRCA 1.2 mm thick M.S sheet,powder coated, SPN DB with 200 Amps rated bus bar, 8 way, IP-42 protection surface mounting, 240 volts, dust and vermin proof, suitable for incorporation of MCCBs duly concealled in wall, factory made,including making good distrubbed surfaces with matching colour, complete all as specified.

S&F Factory made sheet metal enclosures double door type made out of CRCA 1.2 mm thick M.S sheet,powder coated, SPN DB with 200 Amps rated bus bar, 12 way, IP-42 protection surface mounting, 240 volts, dust and vermin proof, suitable for incorporation of MCCBs duly concealled in wall, factory made,including making good distrubbed surfaces with matching colour, complete all as specified.

S&F in repairs for sub main wiring with two single core PVC insulated unsheathed stranded copper conductor cable FRLS 2x4 Sqmm single core 650/1100 V , drawn through & including rigid PVC non metallic concealed conduit 25 mm dia including continuous earth wire of size 1x6 sqmm, PVC insulated and unsheathed cable copper stranded conductor (green colour) complete all as specified. NOTE:-Two runs of cable,1 run of earth wire & one run of PVC conduit shall be measured as one length.

S&F in repair of regular batten for LED tube 20W, 4 feet long indoor decorative batten with extruded aluminium housing & Opal diffuser energy efficient 230 Volts IP-20 fixed to walls/ceiling etc, complete all accessories internally prewired and including connecting up with twin core twisted flexible copper conductor cable with suitable size, complete all as specified..

Supply & Fixing LED Bldg security light 45 watts lens type, pressure die cast aluminium housing, heat resistane toughened glass with frame, IP 66 protection with bracket (for housing street light fittings) made of GI pipe 25 mm dia light grade 0.60 mtrs long duly cutted and welded at an angle of 120 degree and fixed to wall with 50 mm X 6 mm MS clamps - 02 Nos with 16 mm dia bolts, nuts, and washers, complete all as specified and directed.

M&L for Air termination, single pointed aluminium rod 12mm dia and 300mm long, complete all as specified. Note:- PCC wooden porcelain blocks with fitting shall be measured and paid separtely.

M&L for Galvanised iron strip 32 x 6mm buried in ground or fixed to walls, complete all as specified.

M&L for Test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm drilled and screwed including 3 nos. 8mm dia 25mm long hex. head screw, complete all as specified.

M&L for Earthing as in repairs complete, all as shown on electrical plate No 3 of MES schedule part-I, as in repairs and as specified including the following:- (i) Galvanised steel earth plate of size 60cmx60cmx6mm thick burried directly in ground vertically to a depth not less than 2.25 metre below ground level with top edge of earth plate at a depth not less than 1.50 metre below normal ground level.(ii) Earth plate surrounded by and packed with char-coal and common salt in alternative layers (n.exc 15cms each layer).(iii) 4 mm dia (8 SWG) G.I earth wire from earth plate to main switch board including necessary GI bolts, nuts check nuts, washers, thimbles etc.(iv) 15 mm bore light grade, GI pipe for protection to earth-strip.(v) 20mm bore, medium grade GI pipe for watering including GI funnel and wire mesh. Pipe shall be provided vertically upto top level of earth pit and then taken horizontally to the earth pit. (vi) 50mm thick pre-cast cover of cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate and MS angle iron 25x25x3mm frame including two coats of painting over a coat of red oxide to exposed steel surfaces.(vii) Excavation in soft/loose soil, returning filling & removal of surplus soil to a distance upto 50 metre as directed.

S&F as in repairs XLPE insulated, armoured,1100 volts grade, heavy duty cable of size 16 Sqmm nominal cross section, 2 core, flat or circular, PVC FRLS insulated aluminium conductor, served with inner sheathing of galvanized steel wire or tape and over-all PVC FRLS sheathed in service connections, laid in trenches, duct, through pipe, in floor, on pole including jointing and testing, complete all as specified .

Excavation in trenches in soft/loose soil not exceeding 1.5 metre wide and not exceeding 1.5 metre deep and not exc 10 Sqm on plan,for laying of cable and getting out,compete all as specified.

Returning, filling in, earth including spreading, leveling watering and well ramming in layers each not exceeding 25cm thick each layer, complete all as specified.

Removal of surplus soil to a distance not exc. 50 metre and depositing where directed at a level not exc. 1.5 metre above the starting point complete all as specified.

M&L Dry and clean fine sand for cable cushioning to underground cable protection, complete all as specified. (Excavation and earth work measured separately). Note- Punned down thickness shall be measured.

S&F in repair Cover to underground cable with one layer of bricks using sub class ‘B’ bricks (old size) laid flat across the cable complete all as specified. (Excavation and earth work measured separately).

S&F Mild steel galvanised pipe, light grade, 40 mm nominal bore for passing of cable, fixed to poles/laid under floor/road crossing/walls complete with and including clamps socket & elbow etc complete all as specified.

AKASH ELECTRICALS

M/S Yashpaul Gulati

Ms Hari Singh

M/s S B Construction Company

manoj and company

KAILASH CONSTRUCTION COMPANY