WBPWD/SSE/SWEC/NIQ106/2025-26

Supply & Delivery of 1.1 KV grade, XLPE insulated & Sheathed, multi stranded, armoured, Al conductor cable of the following size. [Make- Havells / Polycab/RR Kabel]

a) 4 core 50 sq. mm.

a) 2 core 10 sq. mm.

Laying of one No. cable above 35 sqmm and upto 185 sqmm in underground trench 460mm wide x 760mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per Mtr. including filling the space between the bricks and cable and also the trenchwith shifted soil, leveling up and restoring surface duly rammed

Laying of cable from 3/3½ core 35 sqmm to 50 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 2 x 10 SWG GI (Hot Dip) Wire, making holes etc. as necy., mending good damages and painting

a) 4 core 50 sq. mm.

Laying of cable upto 3/4 core 25 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and paintin

a) 2 core 10 sq. mm.

Supply & fixing of compression type cable gland & finishing of cable end by crimping method as to GS

a) 4 core 50 sq. mm.

a) 2 core 10 sq. mm.

Supplying and Laying/Drawing 1.1 KV, 4 x 84/0.3 (6 sqmm) + 2 x 56/0.3 (4 sqmm) ECC, single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Make: Finolex/ Havells/Polycab/RR Kabel) of the following sizes in the 25mm PVC Rigid Conduit [Precision Make] pipe and making necy. connection as required. [for 30A plug]

Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Make: Finolex/ Havells/Polycab/RR Kabel) in 20/25mm size PVC rigid conduit 'FR' (Precision make) incl. necy. fittings as required

a) 2x36/0.3 (2.5 sqmm) + 1x22/0.3 (1.5 sqmm) as ECC

Finishing of the PVC insulated wire ends by socketting with pin/ring type copper sockets & insulated tapes etc., incl. supplying sockets, tapes.

a) 6 sq.mm.

b) 4 sq. mm

c) 2.5 sq. mm.

d) 1.5 sq. mm.

Supplying & Fixing 12 way double door Vertical TPN MCB Distribution Board for MCCB incomer with IP-42/43 protection, on angle iron frame on wall & mending good the damages to original finish incl. interconnection with suitable size of copper wire & neutral link & provision for earthing attachment. incl. S & F 1) 415 V, 125 A, FP MCCB of breaking capacity 25 KA/35 KA as incomer with fixed thermal & fixed magnetic/adjustable thermal & fixed magnetic setting in DB & necessary connections- 01 no., 2) Outgoings: a) 415 V, 32 A TP C-Curve MCB of breaking capacity 10 KA -12 nos [Make: Seimens/L&T/Schnieder/Legrand]

S & F of 240 V Timer DB equivalent to (10 + 2) way SPN double door make DB with SS enclosure phosphitised powder coated incl din rail with IP - 43 protection comprises with 1 nos 32 A DP MCB (C Curve,10 KA) 1 nos 24 hours programmable Time Switch with minimum switching time of 15 minutes ,1 nos 25 A 2 pole power contactor complete with outer cover plate & internal wiring by 4 sqmm copper wire 1 nos. Auto Manual bypass toggle switch ,earthing attachment incl 1 nos LED indication light for running condition & locking arrangement.[Make: Seimens/L&T/Schnieder/Legrand]

S & F 240 V, 2 nos. 6A, plug socket with separate 2 nos. 6 A Piano key type switch (Make: Anchor) on sheet metal switch board embedded in wall incl. S & F 175 x 100 x 65 mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required.

S & F 240 V, 20A, plug socket with separate 20 A Piano key type switch (Make: Anchor) on sheet metal switch board embedded in wall incl. S & F 150x100x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required

Supplying & Fixing Industrial Plug & Socket board with 415 V, 30A, TPN & Earth Metal Industrial Plug socket & 30A Industrial top incl. S&F 32 A TPN/FP MCB breaking capcity 10kA (C- Curve) in SS enclosure fixed on wall and cecessary conection.[Make: Seimens/L&T/Schnieder/Legrand]

Supply & Fixing 240 V 6 A Piano key type switch (Brand approved by EIC) on existing sheet metal switch board having bakelite/perspex top cover by screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required.

Supply & Fixing 240 V, 6A plug socket (Brand approved by EIC), without switch & plug top, on existing sheet metal switch board with bakelite /perspex top cover by screws after making housing for plug by cutting bakelite/perspex top cover and making necy. connections with PVC wire and earth continuity wire etc.

Supply & Fixing of outdoor luminaire ( IP 66) with pressure die cast housing with toughened glass and high power LEDs with secondary optics , 10KV SPD, THD < 10%, PF> 0.95, BIS approved , minimum LPW: 110 lumen/w and minimum system output 13200 lumen suitable for use with 230 Volt, 50Hz. [Make: Philips/ Crompton/Wipro]. (05 years warranty)

S&F of 1.5 mtr long 80 mm dia GI pipe (ISI-M) pole with 150x150x4mm MS base plate incl. S&instln. Of muffing 600x600x760mm above roof neatly cemented finish (3mm thick) suitable for alkathene pipe/polythene pipe entry incl. S&F 25cmx25cmx25cm SS loop box (16SWG) incl.drilled hole in pole as per GS incl. painting with synthetic enamel paint(2 coat) on 1 coat of red oxide.

S&F Single arm header type bracket having 1.5mt long ,40mm dia GI pipe (ISI-M) welded in 100mm dia 0.3mt length GI pipe jacket and 110' angle in top of the bracket as per direction of EIC.

Supplying & Fixing GI waterproof type looping cable box size 200x150x100 mm deep having 4 mm thick comprising of one 250 V 15 A kit-kat fuse unit, one NL on porcelain insulator, one compression type brass cable gland for upto 2- core 16 sqmm PVC/A cable and having lined with rubber gasketted GI top cover with brass machine screws etc., earthing terminal with lug, on steel tubular pole near base, including S&F 40x6 mm thick, MS clamps with bolts, nuts etc. including painting with anticorrosive paint.

Supply and Fixing of the following rated LED lamp. (Make- Philips/Crompton/Wipro)

Fixing only single/twin fluorescent light fitting suspended 25 cm bellow the ceiling with 2 No. 20 mm dia EI conduit (14 SWG) supports fixed with “L” type MS clamp whose one side fixed on ceiling with sutable size 4 nos. fastener and other side connected with the conduit with suitable size of bolts and nuts incl. S&F EI conduit, “L” type (125mmx125mm) 6mm thick and 25mm with MS clamps and connecting the length of PVC insulated wire and mending good damages to original finish and painting etc. by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length.

Supply & Delivery Single LED Fittings With LED tube ( Philips Make, Cat No.TMC 502 P 1xT-LED 22W P3241 incl. 1x MAS LED (PC body) tube 1200mm 18W865 T8 I--2100lm with Al heat sink Or Equivalent product of Crompton/Wipro having similar specification in all respect) (02 years warranty)

Supply & Delivery double LED Fittings With LED tube ( Philips Make, Cat No.TMC 502 P 2xT-LED 22W P3241 incl. 2x MAS LED (PC body) tube 1200mm 18W865 T8 I--2100lm with Al heat sink. or Equivalent product of Crompton/Wipro having similar specification in all respect) (02 years warranty)

Excavation of soil for installation of Earth Electrode and filling & ramming as to GS (For morrum soil).

Earthing with 65 mm dia GI pipe (TATA-Medium)x 3.0 Mts. long and 1 No. 50 mm x 6 mm galvanized (Hot Dip) steel strip(4 Mts. long), 20 mm dia x 125 mm long galvanized bolt,double nuts, double washers including finishing both ends by making holes etc. and S & F 65 mm dia GI pipe (ISI-Medium) protection (3 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level to an average depth of 3.65 Mts

S & F 1200 mm 18W LED Tube Light. [Make - Philips Master LED tube model no.18W 865 T8 I 2100lm/Crompton cat no. LTT8-20] (02 years warranty)

LA SYSTEM:

S & F Lightning Conductor Air Terminal made of 20 mm dia 1000 mm long GI pipe (ISI Medium) having five discharge prongs of 4 SWG GI (Hot Dip) wire at top duly soldered/ welded with 7/16 stranded GI (Hot Dip) wire and 85 mm dia 6 mm thick GI base plate at bottom incl. necessary holes etc. complete duly grouted on the parapet etc. in CC mortar ( 4:2:1), including thimble joints of 7/16 SWG wire and (25 x 6) mm GI strip with SS nuts, bolts & washers.

Supply & fixing of 25 mm x 6 mm thick GI (Hot Dip) flat / strips for Horizontal & Vertical run on wall / floor with GI shaddles as required including drilling holes, bolts, nuts, washers, etc./ and mending good the damages to building works .

Cutting cornices/ steps etc. including cutting recess in buildings etc. & supply & fixing 32 mm bore (ISI-Medium) GI pipe protection as below and mending good damages to the building works: (P:J-1/Item-4) i) Length upto 0.5 Mtr

Hiring charges for scaffolding arrangement including dismantling at the end of work and carriage, for LC installation, per storey of building per vertical run.

Supply & Fixing of Testing Joints by 25 mm x 6 mm thick GI (Hot Dip) strip 125 mm long on wall after making suitable arrangement to establish a clearance of 50mm from wall for making junction connection with vertical conductor and conductor from earth electrode complete with S & F GI bolts, nuts, check-nuts, spring washers etc. as required.

Earthing with 65 mm dia GI pipe (TATA-Medium) 3.0 Mts. long with welded 2 nos. half circle bracket made of GI strip (65 x 8) mm. with two holes on extended portion of the each strip of length min. 250 mm , and 1 No. 50 mm x 6 mm galvanized (Hot Dip) steel strip (4 Mts. long), 20 mm dia x 125 mm long galvanized bolt, double nuts, double washers including finishing both ends by making holes etc. and S & F 65 mm dia GI pipe (ISI-Medium) protection (3 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level to an average depth of 3.65 Mts.

Excavation of soil for installation of Earth Electrode and filling & ramming as to GS. (For morum soil)

Supply, Laying & Fixing of 50mm x 6mm galvanized (Hot Dip) steel strip in underground trench for interconnection between the Earth Points by joining (As per item no 11).

Jointing for Horijontal & vertical run of GI strip through welded joint of (25 x 6) mm or (50 x 6) mm GI Strip to Lap joints/ 'T' joints, etc. and painting the joints with 2 (two) coats of bituminous paint. (NS)

Please Enable Macros to View BoQ information