Construction OF 10 LLPD dairy Plant (Expandable to 15 LLPD) at Madhavaram, Chennai.

Amount

Earth work narrow excavation for foundation in all soils and sub soils and to full depth as may be directed except hard rock requiring blasting inclusive of shoring, shuttering and baling out water where ever necessary, refilling the sides of foundations with excavated earth in layers of not more than 15cm thk watered, well rammed , consolidated and depositing the surplus earth on bank with initial lead of 10m and initial lift of 2m, clearing and leveling the site etc., complete as directed by the federation officers and as per standard specifications.

Earth work open excavation for foundation in all soils and sub soils and to full depth as may be directed except hard rock requiring blasting inclusive of shoring, shuttering and bailing out water where ever necessary , refilling the sides of foundations with excavated earth in layers of not more than 15cm thk watered, well rammed , consolidated and depositing the surplus earth on bank with initial lead of 10m and initial lift of 2m, clearing and leveling the site etc., complete as directed

Supply and filling with M Sand for foundation and basement to required thickness and in layers of not more than 15 cm thick, watered, well rammed and consolidated etc., complete as directed by the Federation Officers and as per standard specifications.

Supplying and filling with conveyed Gravel from approved source of supply with a lead of 0 to 50 km for foundation and basement to required thickness and in layers on not more than 30 cm thick, watered ,well rammed and consolidated etc., complete as directed by the Federation officers and as per the technical Specifications.

Plain Cement Concrete 1:5:10 using 20 mm size HBG stones for foundation including de-watering if found necessary and laid in layers of not more than 15 cm thick for flooring including rendering the top surface rough to take floor finish including side shuttering if required and compaction ,curing etc., complete as directed by the Federation officers and as per the technical Specifications

Supplying, erecting steel centering using M.S. Sheet of size 90X60cm and BG 10 gauge stiffened welded with M.S. angel of size 25X25X3mm laid over silver osk/country wood joist of size 10X6.5cm spaced at about 90cm centre to centre and supported by casurinaprops of 10 to 13cm dia spaced at 75cm center to centre for all type of RCC roof slab, lintel beam,T,L,beam landing slab plinth beam, grade beam, column footing, column , sunshade, facia, sloped roof, waist slab, etc., Including necessary supports with all cross bracings filling slits and holes in the surfaces(the retrieved materials should be taken back by the contractor) and side shuttering etc., complete as directed by the Federation officers and as per standard specification.Upto to Basement Height - Plain Surface - Upto to Basement

Upto to Basement Height - Column Surface- upto to Basement

Upto to Basement Height - Wall surface -

0 to 3.30m - Plain Surface

0 to 3.30m - Column Surface

3.30 to 4.30 - Plain Surface

3.30 to 4.30 - Column Surface

4.30 to 5.30 m - Plain Surface

4.30 to 5.30 m - Column Surface

5.30 to 6.30m - Plain Surface

5.30 to 6.30m - Column Surface

6.30 to 7.30m - Plain Surface

6.30 to 7.30m - Column Surface

7.30 to 8.30 m - Plain Surface

7.30 to 8.30 m - Column Surface

8.30 to 9.30 m - Plain Surface

8.30 to 9.30 m - Column Surface

9.30 to 10.30 m - Column Surface

RCC concrete machine mixed 1:1.5:3 [ one part cement, one and a half parts sand and three parts aggregate ] using 20mm machine crushed hard granite broken stones for all RCC works cost excluding centering and reinforcement but including compactin with mechanical vibrators and curing etc.. complete as directed by the Federation Officers and as per standard specifications. Upto Basement

Above Basement upto 4.50 m Height

From 4.50 m to 9.00 m Height - First Floor

Supply, fabricating and placing in position of reinforcement grills for all RCC works including cost of steel rods, binding wires, labour for bending, cutting and tying etc., complete as as directed by the federation officers and as per standard specifications.

Brick work in CM 1:5 (one cement & five M sand) using II class ground moulded bricks of size 9" x 4½" x 3" including finishing, curing,etc., complete complying with standard specification Building works.Upto Basement

Above Basement to 4.50 m

From 4.50 m to 9.00 m Height - First Floor

Brick work in CM 1:3 (one cement & three M sand) using II class ground moulded bricks of size 9" x 4½" x 3" including finishing, curing,etc., complete complying with standard specification Building works.

Brick partition walls of 11.15 cm thickness using best quality country bricks of size 9" × 4½" × 3" in Cement Mortar 1:3 (One Cement and Three M Sand) using hoop iron reinforcement if found necessary including curing etc. complete and as directed by the departmental officers. (Hoop iron reinforcement will be measured and paid for separately) Ground Floor

Plastering the surface of walls with Cement Mortar 1:5 (One cement and Five M sand), 20mm thick in all floors including curing etc., complete complying with standard specification and as directed by the departmental officers.

Plastering the surface of walls with Cement Mortar 1:5 (One cement and Five M sand), 12mm thick in all floors including curing etc., complete complying with standard specification and as directed by the departmental officers. (inner Plastering)

Plastering the surface of walls with Cement Mortar 1:3 (One cement and Five M sand), 12 mm thick in all floors including curing etc., complete complying with standard specification and as directed by the departmental officers.

Exterior Painting - Painting two coats of newly plastered wall surface with ready mixed plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification.

Flooring with both side unposlished paradiso Granite stone of 25 to 30 mm thick of approved quality set in CM 1:3, 20mm thick and pointing with white cement and adhesive componenets etc., complete as directed by the Federation officers and as per standard specification.

Flooring with both side unposlished paradiso Granite stone of 20 mm thick of approved quality set in CM 1:3, 20mm thick and pointing with white cement and adhesive componenets etc., complete as directed by the Federation officers and as per standard specification.

Supplying, fabricating and erection of MS Trusses complying with standard specifications. including anchor & connection bolt as specified in the deawing, welding as per IS 816, painting 2 coat of enamel paint of approved quality and colour after sand blasting with necessary hire charges of crane, hoisting, equipments, rope charges etc, complete in all respects as directed by the federation officers.

Providing epoxy flooring of 1.80mm to 2mm thick over treated surface with suitable admixtures and the rate inclusive of cost of material and labour (Quality, colour and desigh should got approved from the Executive Engineer (Civil) before commencement of work) etc., complete as per standard specifications and as directed by the federation officers.

Supplying and Erecting Gear Operated Type Rolling Shutter with ISI make of approved size and section using 18 GI sheet. The shutter shall be painted with one coat of red oxide primer and the rate is inclusive of hood covers, transportation charges etc., complete complying with standard specification and as directed by the departmental officers.

Supply & fixing in position of Aluminium roofing sheets of 0.71 mm for roofing it including all materials, labour bolts, nuts and washers, transportation chatrges etc.,complete as directed by the federation engineers and as per standard specification.

Supply and fixing in position with powder coated MS roofing sheet 0.47mm thick corrugated of approved make for roofing with air vent . The rate including the laps with necessary bolt nut screw etc complete complying with standard specification and as directed by the departmental officers.

Manufacturing, Supplying and Fixing of Stainless Steel Handrails for staircase using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia Stainless Steel pipe post of 1.00mm thick as vertical at 900mm centre with 2 Nos. of 25mm dia intermediate horizontal stainless steel pipe of 1.60mm thick in between. The vertical pipe has to be welded to the 100 X 100 X 6mm MS base plate encased in the base concrete. The rate is inclusive of the charges for cutting, bending, welding, grinding, polishing, conveyance, electrical charges, complete complying with standard specification and as directed by the departmental officers.

Providing and fixing MS PVC Covered steps in inner side of the sump including all materials, labours etc. complete complying with standard specification and as directed by the departmental officers.

Supply and fixing in position of Manhole Cover 600 x 600 mm(Heavy Duty) including cost of material, labour etc., complete as as directed by the federation officers and as per standard specifications.

Supplying and fixing of Aluminium Sliding window with partially panelled / Glazed with necessary fixtures hinges,rubber gasket, screws and fixing clips etc., including necessary filling up of gaps at junctions, at top, bottom and sides with sealent etc., The window shall be provided with towerbolt, locking arrangement etc., The cost and conveyance of all materials to site and all labour charges etc., complete.

Supply and fixing Aluminium glazed ventilator 1.2x0.5 with all accessories etc, comp above 4.50m with necessary fixtures hinges,rubber gasket, screws and fixing clips etc., including necessary filling up of gaps at junctions, at top, bottom and sides with sealent etc., The ventilator shall be provided with tower bolt, locking arrangement etc., The cost and conveyance of all materials to site and all labour charges etc., complete.

Supplying and fixing of Aluminium Sliding doors with partially panelled / Glazed with necessary fixtures hinges,rubber gasket, screws and fixing clips etc., including necessary filling up of gaps at junctions, at top, bottom and sides with sealent etc., Bottom 900mm height shall be with Prelaminated both side Bison lam sheet (Cement Particle Board) fixed to shutter. The door shall be provided with Aluminium handle, door closer, stopper, towerbolt, locking arrangement etc., The cost and conveyance of all materials to site and all labour charges etc., complete.

Supply & paving the vitrified stain free nano polished floor using 600 X 600 X 10mm size vitrified tiles of superior quality as approved by the federation officers laid in cement mortar 1:3 20mm thick and applying cement slurry etc., omplete as directed by the Federation Officers and as per standard specifications.

Flooring with following ceramic tiles of size 305 x 305 x 6 mm laid over 20 mm thick cement mortar 1:3 (One Cement and Three Sand) base mortar over the existing slab / floor including cutting the tiles to the required size with special cutter wherever necessary, laying in position and pointing with white cement mixed with colouring pigment at the rate of 0.3 Kg. / sq.m. etc., complete complying with standard specification. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)

Supplying and fixing in position of Indian make water closet of orissa pan 1st quality of size 584mm including flushing valve system with necessary pipe arrangement fixed over sand cushion and forming flooring alround etc.Complete as directed by the federation engineers and as per standard specification.

Supplying and fixing in position of European water closet with 'P' trap and double flapped set cover including all internal connections along with CP flushing valve and pipe arrangements (cascate model) etc., complete.( 10 liter capacity- design should be got approved by the Federation Engineer before use on works)

Supply and fixing of SS bip cock / screw down tap including cost of connecting hose etc complete as directed by the federation engineers and as per standard specification

Supply and fixing of CP Two Way Bib Cock with Health Faucet etc, complete as directed by the federation officers and as per standard specification

Supplying and fixing in position best quality and approved make Indian made white glazed earthernware wash hand basin of size 550 x 400mm (with pedestal ) CP pillar tap, 32mm dia "B" class GI waste pipe with rubber plug and chain, 15mm dia GM wheel valve, 15mm brass nipple, 15mm dia nylone connection, 32mm dia CP brass waste coupling including fixing of wash basin using CI brackets on to the wall in position with TW plugs and screws, rubber washers, white lead and giving necessary water supply connection and painting the brackets with two coat of painting over a priming coat of anti-corrosive paint including testing for leakages etc., complete complying with standard specification and as directed by the departmental officers. (The wash hand basin and specials should be got approved by the Executive Engineer before use on works).

Supplying and fixing approved best quality brass CP towel rail 600mm long and 20mm dia with brackets of same materials including cost of teak wood plugs and CP screws, etc., complete complying with standard specifications. (The tower rail should be got approved by Executive Engineer before use on works).

Solid panel PVC door with frame: Solid PVC Door Shutters using 19 Gauge 19mm MS square tubes for styles and outer frames. 15mm MS square tubes for top, lock and bottom rails. The steel tubes shall be covered with 5mm thick solid PVC Sheets. Shutter using 5mm thick solid PVC Sheets for panelling shall rigidly fixed in position including necessary furniture and fittings. The over all size of styles shall be 50mm x 30mm. The over all size of top rail, lock rail and bottom rail shall be 75mm x 30mm. The over all size of frames shall be 50mm x 45mm with suitable rabate for housing the shutter

Supply and fixing of Syntex tank 1000 liters etc., complete as directed by the federation officers and as per standard specifications

Supplying and fixing of BALL VALVE 32 mm dia including labour charges, etc complete as directed by the federation engineers and as per standard specification.

Supplying and fixing of SS FLOOR TRAP including labour charges, etc complete as directed by the federation engineers and as per standard specification.

Construction of manhole chamber of size 60cmx60cm with brickwork etc, Complete as directed by the federation engineers and as per standard specification.

Supply and fixing in position of best Indian make white / colour glazed earthernware lipped mouth flat back urinal of best quality and approved make of size 430mm x 260mm x 350mm with GI pipe, 32mm dia bell mouth PVC connection and waste pipe, 15mm dia GI pipe of required length, 15mm dia GM wheel valve, 15mm dia brass nipple 2 Nos., and fixing the urinals in position with necessary TW plugs, clamps, screws, etc., including dismantling masnory and re-doing the same to the original condition, etc., including painting the pipe with two coats of best quality approved synthetic enamel paint over one coat of red oxide primer and checked without any leakage etc. complete complying with standard specifications and as directed by the departmental officers. (The urinal should be got approved by the Executive Engineer before use on works.)

supplying and fixing if marble of 0.60x1.22m.,18/20mm thick for urinal partition including for labour charges for fixing and polishing etc.,

Supplying and fixing in position best approved of BIS quality PVC rain water down fall pipes having a pressure of 4 kg. / sq.cm including cost of necessry PVC shoe, PVC bend, cast iron gratings of required diameter and special clamps, brass screws, nails, etc., and fixing of cast iron gratings at junction of parapet and the RCC roof slab including finishing neatly etc., complete. The rate shall be inclusive of cast of removable cast iron grating. The PVC pipe shall be fixed in wall with special type of "U" clamp at the centre of the pipe line in addition to those for more than 3.0 metre pipe length, etc., complete complying with standard specification. 110mm dia PVC Pipe

Plain Cement Concrete 1:2:4 using 40 mm size HBG stones for foundation including de-watering if found necessary and laid in layers of not more than 15 cm thick for flooring including rendering the top surface rough to take floor finish including side shuttering if required and compaction ,curing etc., complete as directed by the Federation officers and as per the technical Specifications

supply and fixing of pvc false celing including aluminium frame,fittings and labour,transport charge etc….complete complying with standard specification and as directed by the departmental officers.

Plain Cement Concrete 1:4:8 using 40 mm size HBG stones for foundation including de-watering if found necessary and laid in layers of not more than 15 cm thick for flooring including rendering the top surface rough to take floor finish including side shuttering if required and compaction ,curing etc., complete as directed by the Federation officers and as per the technical Specifications

Drilling 3 nos 9" Bore well( 230 mm dia) bore well - Cost of necessary geological survey by engaging government authorized geologist including cost of hire charges for divining equipments cost of conveyance and labour charges for conducting geological survey etc. complete as instructed by the federation officers with standard specification - FOR 3 POINTS

Drilling of 230mm dia borewell to any required depth as instructed by the federation officers etc.complete complying with standard specification and as directed by the departmental officers.

Supply & Delivery of PVC Plain/sloted casing pipe of following dia230mm ɸ Plain casing PVC pipe etc complete complying with standard specification and as directed by the departmental officers.

Supply & Delivery of PVC Plain/sloted casing pipe of following dia160mm ɸ Sloted PVC casing pipe etc complete complying with standard specification and as directed by the departmental officers.

Supply, laying of nylon mesh for inserting the pipe & motor as instruction complete complying with standard specification and as directed by the departmental officers.

Supplying and fixing fittings around Borewell 'U' clamps, 'L' elbow, Bore plate, Ball valve and Bore cap etc.complete complying with standard specification and as directed by the departmental officers.

Supplying and filling pebbles and muddy powder around borewell as instructed by the federation officers including Transporting and conveyance charges etc.complete complying with standard specification and as directed by the departmental officers.

Supply and fixing of submerssible motor of 3HP submerssible motor with multi stage pump in Stainless steel body, single and Three phase motor and a maximum water discharge flow of 100 to 500 LPM,applicable for agriculture,domestic, industrial usage, 1 year warranty.complete complying with standard specification and as directed by the departmental officers.

Labour for erection of 3 HP Submerssible motor with multi stage pump in stainless steel body, single and three phase motor and a maximum water discharge flow of 100 to 500 LPM applicable for agriculture,domestic,industrial usage and 1 year warranty with necessary rope arrangements etc, Complete as directed by the federation engineers and as per standard specification.

Supply and fixing of 50mm dia 'L' elbow including fixing in position etc complete as directed by the federation engineers and as per standard specification.

Supply and fixing 2 inch dia GM non return wheel Valve including fixing in position etc complete as directed by the federation engineers and as per standard specification.

Supply and fixing 2 inch dia stainless steel adopter from motor to delivery line etc complete as directed by the federation engineers and as per standard specification.

Supply and Painting with two coats of new iron work with ready mixed Synthetic enamel paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification.

Plastering the surface of walls with Cement Mortar 1:3 (One cement and Three M sand), 20mm thick with WPC in all floors including curing etc., complete complying with standard specification and as directed by the departmental officers.

Engaging the Hydraulic breaker in hour basis for dismantling of existing damaged RCC structure etc., and the rate inclusive of operating fuel and labour charges etc complete complying with standard specification and as directed by the departmental officers.

Engaging the 8 Unit capacity tippers in day basis under 8 Hr duty per day for conveyence of dismantled debries away form site and the rate inclusive of operating fuel and labour charges, stacking & levelling of dismantled material complete complying with standard specification and as directed by the departmental officers.

Engaging the Electrical operated / Fuel operated power saw in hour basis for trimming of trees from site and the rate inclusive of operating fuel and labour charges, stacking & positioning of trimmed branches complete complying with standard specification and as directed by the departmental officers.

Dismantling of existing damaged AC Sheet Roofing without roof timbers and the rate inclusive of stacking of dismantled material complete complying with standard specification and as directed by the departmental officers.

Removing old paint from structural steel by blow lamp or sand paper and the rate inclusive of all labour charges etc.,complete complying with standard specification and as directed by the departmental officers.

Supply and painting OLD iron work with 2 coats of anti-corrosive synthetic enamel paint of approved quality and colour over priming coat etc complete complying with standard specification and as directed by the departmental officers.

Supply & fixing in position with Stainless steel grating for gratings of size 0.30m x 0.30m with base perforated sheet etc complete complying with standard specification and as directed by the departmental officers.

Supplying and laying 160mm dia PVC pipe at 6Kg/cm² working pressure etc complete complying with standard specification and as directed by the departmental officers.

Earth work in all soils except hard rock requiring blasting and conveying for filling of basement with lead of 0 to 100 metre deploying earth moving machinery and tippers including benching, formation of bunds, breaking clods, sectioning etc., complete as directed by the Federation Officers and as per standard specifications.

GST Note: The tenderer should quote the amount towards Goods and Service tax (GST) in the appropriate columns in terms of percentage (%). If not quoted, it will be considered that the rate quoted is inclusive of GST.

Elite Contractors (Chennai) Pvt Ltd